[Keyboard] Add Durgod Taurus K310 keyboard (#12314)

Co-authored-by: Tyler Tidman <tyler.tidman@draak.ca> Co-authored-by: Simon Arlott <sa.me.uk>
2021-07-22 00:09:00 -07:00
parent 931bf52b74
commit 13a514923a
52 changed files with 1945 additions and 642 deletions
@@ -1,57 +1,4 @@
 # K320

-This is a standard off-the-shelf Durgod Taurus K320 TKL (87/88-key) keyboard without backlight.
+See: [K320](../k3x0/k320/readme.md)

-* Keyboard Maintainer: [dkjer](https://github.com/dkjer)
-* Hardware Supported: Durgod Taurus K320 board with STM32F070RBT6
-* Hardware Availability: https://www.durgod.com/page9?product_id=47&_l=en
-
-## Instructions
-
-### Build
-
-Make command example for this keyboard (after setting up your build environment):
-
-    make durgod/k320:default
-
-Flashing example for this keyboard:
-
-    make durgod/k320:default:flash
-
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
-
-### Initial Flash
-
-For first Flashing from initial Stock's Firmware
-
-1. Back up original Firmware Image:
- Unplug
- Short Boot0 to Vdd (See below)
- Plug In USB
- Make a Flash Image's Backup in case you wanted to restore the Keyboard to Stock's Image:
-  - Using DFUseDemo.exe from ST's STSW-STM32080: https://www.st.com/en/development-tools/stsw-stm32080.html
-  - Using dfu-util:
-
-        dfu-util --list
-        dfu-util --alt 0 --dfuse-address 0x08000000 --upload ${OLD_STOCK_BIN}
-
-2. Flash the QMK Firmware Image.
- Put board into Bootloader mode, using the same method as when backing up the original Firmware (above)
- Here are a few options for performing the initial Flash:
-  - Using [QMK Toolbox](https://github.com/qmk/qmk_toolbox)
-  - Using DFuseDemo.exe if STTub30 driver is used.
-  - Using dfu-util:
-
-        dfu-util --alt 0 --dfuse-address 0x08000000 --download ${NEW_QMK_BIN}
-
-You can short Boot0 to Vdd by shorting R21 to C27 on the sides closest to the processor, as shown:
-
-<img src="https://i.imgur.com/hvDnw5a.jpg" width="520" height="693" alt="Shorting Boot0 to Vdd on K320">
-
-### Subsequent Flashing
-
-For repeating Flashing you can use BootMagic:
- BootMagic Lite has been enabled with Assigned "Esc" key 
- Unplug USB Cable
- Holding Esc Button 
- Plug in USB Cable, Keyboard should be in ST-Bootloader state