michi/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Fix bootloaders not starting user application if the HWB is grounded during watchdog reset.

Browse Source
This commit is contained in:
Dean Camera
2014-10-12 16:43:30 +11:00
parent 4c637c93ba
commit a09cb7e3d8
9 changed files with 59 additions and 49 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Bootloaders/HID/BootloaderHID.txt
+7 -7
View File
@@ -61,9 +61,9 @@
*
* \section Sec_Running Running the Bootloader
*
* This bootloader is designed to be started via the HWB mechanism of the USB AVRs; ground the HWB pin (see device
* datasheet) then momentarily ground /RESET to start the bootloader. This assumes the HWBE fuse is set and the BOOTRST
* fuse is cleared.
* This bootloader is designed to be started via the \c HWB mechanism of the USB AVRs; ground the \c HWB pin (see device
* datasheet) then momentarily ground \c /RESET to start the bootloader. This assumes the \c HWBE fuse is set and the
* \c BOOTRST fuse is cleared.
*
* \section Sec_Installation Driver Installation
*
@@ -73,7 +73,7 @@
* \section Sec_HostApp Host Controller Application
*
* Due to licensing issues, the supplied bootloader is compatible with the HalfKay bootloader protocol designed
* by PJRC, but is non-compatible with the cross-platform loader GUI. A modified version of the open source
* by PJRC, but is <b>not compatible with the cross-platform loader GUI</b>. A modified version of the open source
* cross-platform TeensyLoader application is supplied, which can be compiled under most operating systems. The
* command-line loader application should remain compatible with genuine Teensy boards in addition to boards using
* this custom bootloader.
@@ -86,9 +86,9 @@
* \section Sec_KnownIssues Known Issues:
*
* \par After loading an application, it is not run automatically on startup.
* Some USB AVR boards ship with the BOOTRST fuse set, causing the bootloader
* to run automatically when the device is reset. In most cases, the BOOTRST
* fuse should be disabled and the HWBE fuse used instead to run the bootloader
* Some USB AVR boards ship with the \c BOOTRST fuse set, causing the bootloader
* to run automatically when the device is reset. This booloader requires the
* \c BOOTRST be disabled and the HWBE fuse used instead to run the bootloader
* when needed.
*
* \section SSec_Options Project Options