Fix zero condition of reactive runners that will suspend RGB animation (#12710 )

* Avoid zero or overflow from user's rgb_matrix_config.speed * Avoid zero tick for reactive splash. * Avoid zero time for animation runner. Co-authored-by: filterpaper <filterpaper@localhost>
[Keyboard][Bug] Makrosu VIA compile fix encoder and formatting (#13306 )
2021-06-23 19:45:05 +10:00 · 2021-06-22 20:30:42 -07:00 · 2021-06-22 17:45:13 -07:00 · 2021-06-23 09:34:17 +10:00 · 2021-06-23 09:32:37 +10:00 · 2021-06-22 12:41:57 +10:00
125 changed files with 3091 additions and 597 deletions
--- a/data/mappings/keyboard_aliases.json
+++ b/data/mappings/keyboard_aliases.json
@@ -59,8 +59,11 @@
    'cmm_studio/saka68': {
          target: 'cmm_studio/saka68/solder'
    },
-    'crkbd/rev1': {
-          target: 'crkbd/rev1/legacy'
+    'crkbd/rev1/legacy': {
+          target: 'crkbd/rev1'
+    },
+    'crkbd/rev1/common': {
+          target: 'crkbd/rev1'
    },
    'doro67/multi': {
          layouts: {
--- a/docs/feature_advanced_keycodes.md
+++ b/docs/feature_advanced_keycodes.md
@@ -2,24 +2,27 @@

 These allow you to combine a modifier with a keycode. When pressed, the keydown event for the modifier, then `kc` will be sent. On release, the keyup event for `kc`, then the modifier will be sent.

-|Key       |Aliases                        |Description                                           |
-|----------|-------------------------------|------------------------------------------------------|
-|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                      |
-|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                        |
-|`LALT(kc)`|`A(kc)`, `LOPT(kc)`            |Hold Left Alt and press `kc`                          |
-|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                          |
-|`RCTL(kc)`|                               |Hold Right Control and press `kc`                     |
-|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                       |
-|`RALT(kc)`|`ROPT(kc)`, `ALGR(kc)`         |Hold Right Alt and press `kc`                         |
-|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                         |
-|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`                |
-|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`              |
-|`LSA(kc)` |                               |Hold Left Shift and Left Alt and press `kc`           |
-|`RSA(kc)` |`SAGR(kc)`                     |Hold Right Shift and Right Alt (AltGr) and press `kc` |
-|`RCS(kc)` |                               |Hold Right Control and Right Shift and press `kc`     |
-|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`         |
-|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`       |
-|`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`  |
+|Key       |Aliases                           |Description                                           |
+|----------|----------------------------------|------------------------------------------------------|
+|`LCTL(kc)`|`C(kc)`                           |Hold Left Control and press `kc`                      |
+|`LSFT(kc)`|`S(kc)`                           |Hold Left Shift and press `kc`                        |
+|`LALT(kc)`|`A(kc)`, `LOPT(kc)`               |Hold Left Alt and press `kc`                          |
+|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`   |Hold Left GUI and press `kc`                          |
+|`RCTL(kc)`|                                  |Hold Right Control and press `kc`                     |
+|`RSFT(kc)`|                                  |Hold Right Shift and press `kc`                       |
+|`RALT(kc)`|`ROPT(kc)`, `ALGR(kc)`            |Hold Right Alt and press `kc`                         |
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`            |Hold Right GUI and press `kc`                         |
+|`LSG(kc)` |`SGUI(kc)`, `SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`                |
+|`LAG(kc)` |                                  |Hold Left Alt and Left GUI and press `kc`             |
+|`RSG(kc)` |                                  |Hold Right Shift and Right GUI and press `kc`         |
+|`RAG(kc)` |                                  |Hold Right Alt and Right GUI and press `kc`           |
+|`LCA(kc)` |                                  |Hold Left Control and Alt and press `kc`              |
+|`LSA(kc)` |                                  |Hold Left Shift and Left Alt and press `kc`           |
+|`RSA(kc)` |`SAGR(kc)`                        |Hold Right Shift and Right Alt (AltGr) and press `kc` |
+|`RCS(kc)` |                                  |Hold Right Control and Right Shift and press `kc`     |
+|`LCAG(kc)`|                                  |Hold Left Control, Alt and GUI and press `kc`         |
+|`MEH(kc)` |                                  |Hold Left Control, Shift and Alt and press `kc`       |
+|`HYPR(kc)`|                                  |Hold Left Control, Shift, Alt and GUI and press `kc`  |

 You can also chain them, for example `LCTL(LALT(KC_DEL))` or `C(A(KC_DEL))` makes a key that sends Control+Alt+Delete with a single keypress.

--- a/docs/fr-fr/README.md
+++ b/docs/fr-fr/README.md
@@ -7,9 +7,9 @@
 [![Contributeurs GitHub](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
 [![Forks GitHub](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)

-## Qu'est-ce que QMK Firmware ?
+## Qu'est-ce que QMK Firmware?

-QMK (*Quantum Mechanical Keyboard*) est une communauté open source qui maintient le firmware QMK, la QMK Toolbox (*Boite à outil*), qmk.fm et leurs documentations. QMK Firmware est un firmware dédié aux claviers qui est basé sur [tmk\_keyboard](https://github.com/tmk/tmk_keyboard). Il offre des fonctionnalités très utiles pour les contrôleurs Atmel AVR, et, plus spécifiquement pour [les produits d'OLKB](https://olkb.com), le clavier [ErgoDox EZ](https://www.ergodox-ez.com), et pour les [produits Clueboard](https://clueboard.co/). Il prend désormais aussi en charge les processeurs ARM qui utilisent ChibiOS. Vous pouvez l'utiliser pour contrôler un clavier personnalisé soudé à la main ou alors sur un clavier avec un PCB personnalisé.
+QMK (*Quantum Mechanical Keyboard*) est une communauté open source qui maintient le firmware QMK, la QMK Toolbox (*Boite à outil*), qmk.fm et leurs documentations. QMK Firmware est un firmware dédié aux claviers qui est basé sur [tmk\_keyboard](https://github.com/tmk/tmk_keyboard). Il offre des fonctionnalités très utiles pour les contrôleurs Atmel AVR, et, plus spécifiquement pour [les produits d'OLKB](https://olkb.com), le clavier [ErgoDox EZ](https://www.ergodox-ez.com), et pour les [produits Clueboard](https://clueboard.co/). Il prend désormais aussi en charge les processeurs ARM qui utilisent ChibiOS. Vous pouvez l'utiliser pour contrôler un clavier personnalisé soudé à la main ou alors sur un clavier avec un PCB personnalisé.

 ## Comment l'obtenir

@@ -23,7 +23,7 @@ Avant d'être prêt à compiler vous allez devoir [installer un environnement](f

    make planck/rev4:default

-Cette commande compilera la révision `rev4` du clavier `planck` avec la disposition `default`. Notez que tous les claviers n'ont pas forcément de révisions (aussi appelées sous-projects ou dossiers, ou en anglais « subprojects » ou « folder »). Cette option peut donc être omise :
+Cette commande compilera la révision `rev4` du clavier `planck` avec la disposition `default`. Notez que tous les claviers n'ont pas forcément de révisions (aussi appelées sous-projects ou dossiers, ou en anglais «subprojects» ou «folder»). Cette option peut donc être omise:

    make preonic:default

--- a/docs/fr-fr/driver_installation_zadig.md
+++ b/docs/fr-fr/driver_installation_zadig.md
@@ -9,7 +9,7 @@ Nous vous recommandons d'utiliser l'utilitaire [Zadig](https://zadig.akeo.ie/).
 ## Installation

 Passez votre clavier en mode bootloader, soit en appuyant sur le keycode `RESET` (qui peut se trouver dans un calque différent) ou en appuyant sur le bouton reset qui se trouve en général sous la board. Si votre clavier n'a aucune de ces options, essayez de le brancher en maintenant Escape ou Espace+`B` appuyés (voir la documentation de [Bootmagic](feature_bootmagic.md) pour plus de détails). Certaines boards utilisent [Command](feature_command.md) à la place de Bootmagic. Dans ce cas, vous pouvez entrer en mode bootloader en appuyant, à n'importe quel moment lorsque le clavier est branché, sur les combinaisons de touches Shift Gauche+Shift Droit+`B` ou Shift Gauche+Shift Droit+Escape.
-Certains claviers ont des instructions spécifiques pour passer en mode bootloader. Par exemple, la touche [Bootmagic Lite]](feature_bootmagic.md#bootmagic-lite) (défaut : Échap) peut être sur une touche différente telle que Contrôle Gauche. La combinaison pour la Command (défaut : Shift Gauche+Shift Droit) peut être différente, par exemple Contrôle Gauche+Contrôle Droit. Référez-vous au fichier README de votre clavier.
+Certains claviers ont des instructions spécifiques pour passer en mode bootloader. Par exemple, la touche [Bootmagic Lite]](feature_bootmagic.md#bootmagic-lite) (défaut: Échap) peut être sur une touche différente telle que Contrôle Gauche. La combinaison pour la Command (défaut: Shift Gauche+Shift Droit) peut être différente, par exemple Contrôle Gauche+Contrôle Droit. Référez-vous au fichier README de votre clavier.

 Pour mettre un clavier en mode bootloader avec USBaspLoader, appuyez sur le bouton `RESET` tout en maintenant le bouton `BOOT`. Vous pouvez aussi maintenir le bouton `BOOT` en branchant le câble USB.

@@ -43,4 +43,4 @@ Cliquez dessus avec le bouton droit et sélectionner **Désinstaller le périph

 ![Le dialogue Suppression de périphérique, avec la boîte "suppression de pilote" cochée](https://i.imgur.com/aEs2RuA.png)

-Appuyez sur **Action → Analyser les changements de hardware**. A ce stade, vous devriez pouvoir saisir à nouveau. Vérifiez dans Zadig que les périphériques utilisent bien le pilote `HidUsb`. Si c'est le cas, vous avez corrigé le problème, votre clavier devrait fonctionner à nouveau !
+Appuyez sur **Action → Analyser les changements de hardware**. A ce stade, vous devriez pouvoir saisir à nouveau. Vérifiez dans Zadig que les périphériques utilisent bien le pilote `HidUsb`. Si c'est le cas, vous avez corrigé le problème, votre clavier devrait fonctionner à nouveau!
--- a/docs/fr-fr/faq_build.md
+++ b/docs/fr-fr/faq_build.md
@@ -20,7 +20,7 @@ Veuillez noter que lancer `make` avec `sudo` est généralement une **mauvaise**

 ### Règles `udev` pour Linux

-Sous Linux, vous aurez besoin des permissions appropriées pour accéder au MCU (le micro-contrôleur). Vous avez le choix d'utiliser `sudo` en flashant le firmware, ou placer ces fichiers dans `/etc/udev/rules.d`. Une fois ajouté, lancez les commandes suivantes :
+Sous Linux, vous aurez besoin des permissions appropriées pour accéder au MCU (le micro-contrôleur). Vous avez le choix d'utiliser `sudo` en flashant le firmware, ou placer ces fichiers dans `/etc/udev/rules.d`. Une fois ajouté, lancez les commandes suivantes:

 ```console
 sudo udevadm control --reload-rules
--- a/docs/fr-fr/faq_debug.md
+++ b/docs/fr-fr/faq_debug.md
@@ -6,13 +6,13 @@ Cette page détaille diverses questions fréquemment posées par les utilisateur

 ## `hid_listen` ne reconnaît pas de périphérique

-Lorsque la console de débugage sur votre périphérique n'est pas prêt, vous obtiendrez un message similaire :
+Lorsque la console de débugage sur votre périphérique n'est pas prêt, vous obtiendrez un message similaire:

 ```
 Waiting for device:.........
 ```

-Une fois le périphérique connecté, *hid_listen* le trouve et vous obtiendrez ce message :
+Une fois le périphérique connecté, *hid_listen* le trouve et vous obtiendrez ce message:

 ```
 Waiting for new device:.........................
@@ -61,7 +61,7 @@ Vous ne voulez probablement pas "briquer" votre clavier, rendre impossible d'éc

 - Si votre map de clavier n'inclut pas de RESET, pour entrer en mode DFU, vous devrez appuyer sur le bouton reset du PCB. Cela implique que vous devrez certainement dévisser certaines pièces de votre clavier pour y accéder.
 - Modifier les fichiers tmk_core / common peut rendre le clavier inutilisable
- Si un fichier .hex trop large est la cause du problème : `make dfu` supprime le bloc puis teste la taille (il ne fait pas les choses dans le bon ordre), ce qui provoque une erreur. En résultat, le flash n’aura pas été fait et le clavier restera en mode DFU.
+- Si un fichier .hex trop large est la cause du problème: `make dfu` supprime le bloc puis teste la taille (il ne fait pas les choses dans le bon ordre), ce qui provoque une erreur. En résultat, le flash n’aura pas été fait et le clavier restera en mode DFU.
 - Pour finir, notez que la taille maximale d'un fichier .hex sur un Plank est de 7000h (28672 decimal)

 ```
@@ -118,7 +118,7 @@ Sous Windows, activez l'option `Permettre au périphérique de sortir l'ordinate

 Appuyer sur n'importe quelle touche en mode veille devrait sortir l'ordinateur de veille.

-## Vous utilisez un Arduino ?
+## Vous utilisez un Arduino?

 **Faites attention au fait que le nommage des pin d'un Arduino diffère de la puce**. Par exemple, la pin `D0` n'est pas `PD0`. Vérifiez le circuit avec la fiche technique.

--- a/docs/fr-fr/faq_keymap.md
+++ b/docs/fr-fr/faq_keymap.md
@@ -44,7 +44,7 @@ Le premier n'est reconnu que sur macOS, alors que le dernier, `KC_SLEP` et `KC_W

 ## Modificateur "One Shot"

-Cette fonctionnalité permet de corriger un problème avec la touche Shift. En effet, il arrive de saisir plusieurs majuscules en ne voulant en saisir qu'une sur un mot. Ex : `CEtte` à la place de `Cette`. La fonctionnalité « One shot » shift permet de corriger ça.
+Cette fonctionnalité permet de corriger un problème avec la touche Shift. En effet, il arrive de saisir plusieurs majuscules en ne voulant en saisir qu'une sur un mot. Ex: `CEtte` à la place de `Cette`. La fonctionnalité «One shot» shift permet de corriger ça.

 https://github.com/tmk/tmk_keyboard/issues/67

@@ -59,7 +59,7 @@ Pour les touches de modification et les actions de calque, vous devez placer `KC

 ## Support de touche à verrouillage mécanique

-Cette fonctionnalité permet l'usage de *touches à verrouillage mécanique* comme [ces interrupteurs Alps](https://deskthority.net/wiki/Alps_SKCL_Lock). Vous pouvez l'activer en ajoutant ceci à votre `config.h` :
+Cette fonctionnalité permet l'usage de *touches à verrouillage mécanique* comme [ces interrupteurs Alps](https://deskthority.net/wiki/Alps_SKCL_Lock). Vous pouvez l'activer en ajoutant ceci à votre `config.h`:

 ```
 #define LOCKING_SUPPORT_ENABLE
--- a/docs/fr-fr/flashing.md
+++ b/docs/fr-fr/flashing.md
@@ -27,15 +27,15 @@ Méthodes de flash compatibles :
 * [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (interface graphique recommandé)
 * [dfu-programmer](https://github.com/dfu-programmer/dfu-programmer) / `:dfu` avec QMK (outil en ligne de commande recommandé)

-Ordre des actions :
+Ordre des actions:

 1. Pressez le keycode `RESET`, ou appuyez sur le bouton physique RESET ou alors créez un contact entre RST et GND.
 2. Attendez que l'OS detecte l'appareil.
 3. Éffacez la mémoire, cela peut être fait automatiquement.
 4. Flasher le fichier .hex.
-5. Redémarrez l'appareil en mode « application », cela peut être fait automatiquement.
+5. Redémarrez l'appareil en mode «application», cela peut être fait automatiquement.

-Alternativement :
+Alternativement:

    make <keyboard>:<keymap>:dfu

@@ -48,11 +48,11 @@ QMK a un fork du bootloader LUFA DFU qui vous permet de faire un simple scan de
    #define QMK_LED E6
    #define QMK_SPEAKER C6

-Le fabricant et le nom du produit proviennent de vos définitions dans fichier  `config.h`, et la chaîne de caractère « bootloader » est ajoutée au nom du produit.
+Le fabricant et le nom du produit proviennent de vos définitions dans fichier  `config.h`, et la chaîne de caractère «bootloader» est ajoutée au nom du produit.

-Pour génerer le bootloader, utilisez la cible `bootloader`. Exemple : `make planck/rev4:default:bootloader`.
+Pour génerer le bootloader, utilisez la cible `bootloader`. Exemple: `make planck/rev4:default:bootloader`.

-Pour génerer un fichier .hex prêt pour la production qui contiendra tant l'application que le bootloader, utilisez la cible `production`. Exemple : `make planck/rev4:default:production`.
+Pour génerer un fichier .hex prêt pour la production qui contiendra tant l'application que le bootloader, utilisez la cible `production`. Exemple: `make planck/rev4:default:production`.

 ### Commandes DFU

@@ -67,7 +67,7 @@ Il y a plusieurs commandes DFU que vous pouvez utiliser pour flasher le firmware

 Les cartes arduinos et leurs clones utilisent le [bootloader Caterina](https://github.com/arduino/ArduinoCore-avr/tree/master/bootloaders/caterina) (tous les claviers utilisant un Pro Micro, ou un clone). Ils utilisent aussi le protocole avr109 pour communiquer en virtuellement en série (serial en anglais). Les bootloaders comme le [A-Star](https://www.pololu.com/docs/0J61/9) sont basés sur Caterina.

-Pour vérifier la compatibilité avec un bootloader Caterina, vérifiez que ce bloc est présent dans votre fichier `rules.mk` :
+Pour vérifier la compatibilité avec un bootloader Caterina, vérifiez que ce bloc est présent dans votre fichier `rules.mk`:

 ```make
 # Bootloader selection
@@ -81,20 +81,20 @@ Pour vérifier la compatibilité avec un bootloader Caterina, vérifiez que ce b
 BOOTLOADER = caterina
 ```

-Flashers compatibles :
+Flashers compatibles:

 * [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (Interface graphique recommandée)
 * [avrdude](https://www.nongnu.org/avrdude/) avec avr109 / `:avrdude` (Outil en ligne de commande recommandé)
 * [AVRDUDESS](https://github.com/zkemble/AVRDUDESS)

-Séquence de flash : 
+Séquence de flash :

 1. Pressez la touche avec le keycode `RESET`, ou reliez les ports GND et RST. Vous n'avez que 7 secondes pour flasher une fois que l'opération a été faite.
 2. Attendez que l'OS détecte l'appareil.
 3. Flasher le fichier .hex.
 4. Attendez que l'appareil redémarre automatiquement.

-ou, utilisez :
+ou, utilisez:

    make <keyboard>:<keymap>:avrdude

@@ -111,7 +111,7 @@ Il existe un certain nombre de commandes DFU que vous pouvez utiliser pour mettr

 Halfkay est un protocole ultra-simple développé par PJRC qui utilise HID et qui est fourni avec tous les Teensys après le modèle 2.0.

-Pour vérifier la compatibilité avec le booloader Halfkay, vérifiez que ce bloc est présent dans votre fichier `rules.mk` :
+Pour vérifier la compatibilité avec le booloader Halfkay, vérifiez que ce bloc est présent dans votre fichier `rules.mk`:

 ```make
 # Bootloader selection
@@ -125,24 +125,24 @@ Pour vérifier la compatibilité avec le booloader Halfkay, vérifiez que ce blo
 BOOTLOADER = halfkay
 ```

-Flasher compatibles :
+Flasher compatibles:

 * [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (Interface graphique recomandée)
 * [Teensy Loader](https://www.pjrc.com/teensy/loader.html) (petit utilitaire ultra simple)
 [Teensy Loader en ligne de commande](https://www.pjrc.com/teensy/loader_cli.html) (Outil en ligne de commande recommandé)

-Séquence de flash :
+Séquence de flash:

 1. Pressez la touche du keycode `RESET`, ou reliez les ports RST et GND rapidement. Vous avez ensuite 7 secondes pour réaliser le flash.
 2. Attendez que l'OS détecte l'appareil.
 3. Flasher le fichier .hex.
-4. Redémarrez l'appareil en mode « application ». Cela peut être fait automatiquement.
+4. Redémarrez l'appareil en mode «application». Cela peut être fait automatiquement.

 ## USBasploader

 USBasploader est un bootloader développé par matrixstorm. Il est utilisé sur des processeurs AVR non-USB comme le ATmega328P, qui fonctionne grâce à V-USB.

-Pour vérifier la compatibilité avec le booloader USBasploader, vérifiez que ce bloc est présent dans votre fichier `rules.mk` :
+Pour vérifier la compatibilité avec le booloader USBasploader, vérifiez que ce bloc est présent dans votre fichier `rules.mk`:

 ```make
 # Bootloader selection
@@ -156,24 +156,24 @@ Pour vérifier la compatibilité avec le booloader USBasploader, vérifiez que c
 BOOTLOADER = USBasp
 ```

-Flashers compatibles :
+Flashers compatibles:

 * [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (Interface graphique recommandé)
 * [avrdude](https://www.nongnu.org/avrdude/) avec le programmeur `usbasp`.
 * [AVRDUDESS](https://github.com/zkemble/AVRDUDESS)

-Séquence de flash :
+Séquence de flash:

 1. Pressez la touche du keycode `RESET`, ou reliez le port de boot pendant que RST et GND snt reliés. Cela doit être fait très rapidement.
 2. Attendez que l'OS détecte l'appareil.
 3. Flasher le fichier .hex.
-4. Redémarrez l'appareil en mode « application ». Cela peut être fait automatiquement.
+4. Redémarrez l'appareil en mode «application». Cela peut être fait automatiquement.

 ## BootloadHID

 BootloadHID est un bootloader pour les microcontrôleurs AVR. L'utilitaire de téleversement ne demande pas de drivers au niveau du kernel et peut être lancé sans installer aucune DLLs.

-Pour vérifier la compatibilité avec le bootloader bootloadHID, vérifiez que ce bloc existe dans votre fichier `rules.mk` : 
+Pour vérifier la compatibilité avec le bootloader bootloadHID, vérifiez que ce bloc existe dans votre fichier `rules.mk` :

 ```make
 # Bootloader selection
@@ -187,50 +187,50 @@ Pour vérifier la compatibilité avec le bootloader bootloadHID, vérifiez que c
 BOOTLOADER = bootloadHID
 ```

-Utilitaires de flash compatibles :
+Utilitaires de flash compatibles:

 * [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash) (Utilitaire avec interface graphique recommandé)
 * [bootloadhid Command Line](https://www.obdev.at/products/vusb/bootloadhid.html) / `:BootloadHID` avec QMK (utilitaire en ligne de commande recommandé)

 Séquence de flash

-1. Entrez dans le bootloader en utilisant l'une de ces méthodes :
+1. Entrez dans le bootloader en utilisant l'une de ces méthodes:
    * Pressez la touche du keycode `RESET` (Cela ne fonctionnera pas sur certains appareils).
-    * Verrouillez la touche « Salt » tout en branchant le clavier (Généralement ce principe est documenté dans le fichier readme du clavier)
+    * Verrouillez la touche «Salt» tout en branchant le clavier (Généralement ce principe est documenté dans le fichier readme du clavier)
 2. Attendez que l'OS détecte l'appareil.
 3. Flasher le fichier .hex.
-4. Redémarrez l'appareil en mode « application ». Cela peut être fait automatiquement.
+4. Redémarrez l'appareil en mode «application». Cela peut être fait automatiquement.

-Ou alors :
+Ou alors:

    make <keyboard>:<keymap>:bootloadHID

 ## STM32

-Tous les processeurs STM32 contiennent un bootloader installé en usine qui ne peut pas être modifié ou supprimé. Certains processeurs STM32 ont des bootloaders qui ne peuvent pas être programmés par USB (ex : STM32F103) mais le processus reste le même.
+Tous les processeurs STM32 contiennent un bootloader installé en usine qui ne peut pas être modifié ou supprimé. Certains processeurs STM32 ont des bootloaders qui ne peuvent pas être programmés par USB (ex: STM32F103) mais le processus reste le même.

 Pour le moment, aucune variable `BOOTLOADER` n'est nécessaire dans le fichier `rules.mk`.

-Flashers compatibles :
+Flashers compatibles:

 * [QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) (interface graphique recommandé)
 * [dfu-util](https://github.com/Stefan-Schmidt/dfu-util) / `:dfu-util` (utilitaire en ligne de commande recommandé)

 Séquence pour flasher:

-1. Entrez dans le bootloader en utilisant l'une de ces méthodes :
+1. Entrez dans le bootloader en utilisant l'une de ces méthodes:
    * Utilisez une touche sur laquelle le keycode `RESET` (Cela peut ne pas fonctionner sur les appareils STM32F042)
    * Si un circuit de réinitialisation (Reset) est présent alors utilisé le bouton qui lui est dédié.
    * Autrement, vous devez réaliser une liaison entre BOOT0 et VCC (en appuyant sur le bouton ou à l'aide d'un pont) puis faire un pont entre RESET et GND et enfin relacher le pont BOOT0.
 2. Attendre que l'os détecte l'appareil.
 3. Flasher un fichier `.bin`.h
    * Vous allez recevoir un avertissement à propos de la signature DFU. Ignorez-la.
-4. Réinitialisez l'appareil en mode « application ». Cela peut être fait automatiquement.
-    * Si vous êtes en train de travailler en ligne de commande, par exemple avec un `make planck/rev6:default:dfu-util` alors soyez bien sur que l'argument `:leave` est passé aux arguments DFU grâce à la variable `DFU_ARGS` à l'intérieur de votre fichier `rules.mk` (Ex : `DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave`) afin que votre appareil redémarre après avoir été flashé.
+4. Réinitialisez l'appareil en mode «application». Cela peut être fait automatiquement.
+    * Si vous êtes en train de travailler en ligne de commande, par exemple avec un `make planck/rev6:default:dfu-util` alors soyez bien sur que l'argument `:leave` est passé aux arguments DFU grâce à la variable `DFU_ARGS` à l'intérieur de votre fichier `rules.mk` (Ex: `DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave`) afin que votre appareil redémarre après avoir été flashé.

 ### Commandes STM32

-Il y a différentes commandes que vous pouvez utiliser pour flasher un firmware dans un appareil STM32  :
+Il y a différentes commandes que vous pouvez utiliser pour flasher un firmware dans un appareil STM32:

 * `:dfu-util` - C'est l'option standard pour flasher un appareil STM32. Le script attendra qu'un bootloader STM32 soit présent.
 * `:dfu-util-split-left` - Permet de flasher un firmware normalement, tout comme l'option précédente mais permet de configurer le côté gauche des paramètres EEPROM sur un clavier scindé.
--- a/docs/fr-fr/newbs_flashing.md
+++ b/docs/fr-fr/newbs_flashing.md
@@ -88,7 +88,7 @@ Par exemple, si votre keymap s'appelle "xyverz" et que vous fabriquez une keymap

 La commande va vérifier la configuration du clavier, puis tentera de le flasher en fonction du bootloader (chargeur d’amorçage) spécifié. Cela signifie que vous n'avez pas besoin de savoir quel bootloader votre clavier utilise. Exécutez simplement la commande et laissez-le faire le gros du travail.

-Cependant, tout dépend du bootloader qui est installé sur le clavier. Si cette information n’est pas configurée ou si vous tentez de flasher un clavier qui ne permet pas d’être flashé alors vous obtiendrez cette erreur :
+Cependant, tout dépend du bootloader qui est installé sur le clavier. Si cette information n’est pas configurée ou si vous tentez de flasher un clavier qui ne permet pas d’être flashé alors vous obtiendrez cette erreur:

    WARNING: This board's bootloader is not specified or is not supported by the ":flash" target at this time.

@@ -326,7 +326,7 @@ Il y  aun certain nombre de commandes du DFU que vous pouvez utiliser pour flash

 ### BootloadHID

-Pour les claviers basés sur Bootmapper Client(BMC)/bootloadHID/ATmega32A, si vous êtes prêts à compiler et flasher le firmware, ouvrez votre fenêtre de terminal et lancez la commande suivante :
+Pour les claviers basés sur Bootmapper Client(BMC)/bootloadHID/ATmega32A, si vous êtes prêts à compiler et flasher le firmware, ouvrez votre fenêtre de terminal et lancez la commande suivante:

    make <my_keyboard>:<my_keymap>:bootloaderHID

@@ -351,7 +351,7 @@ Error opening HIDBoot device: The specified device was not found
 Trying again in 5s.
 ```

-Une fois ce résultat obtenu, réinitialisez le contrôleur. Le résultat suivant devrait s’afficher :
+Une fois ce résultat obtenu, réinitialisez le contrôleur. Le résultat suivant devrait s’afficher:

 ```
 Page size   = 128 (0x80)
--- a/docs/ja/faq_build.md
+++ b/docs/ja/faq_build.md
@@ -1,8 +1,8 @@
 # よくあるビルドの質問

 <!---
-  original document: 0.10.33:docs/faq_build.md
-  git diff 0.10.33 HEAD -- docs/faq_build.md | cat
+  original document: 0.12.43:docs/faq_build.md
+  git diff 0.12.43 HEAD -- docs/faq_build.md | cat
 -->

 このページは QMK のビルドに関する質問を説明します。まだビルドをしていない場合は、[ビルド環境のセットアップ](ja/getting_started_build_tools.md) および [Make 手順](ja/getting_started_make_guide.md)ガイドを読むべきです。
@@ -22,73 +22,9 @@

 `make` を `sudo` で実行することは一般的には良い考えでは***なく***、可能であれば前者の方法のいずれかを使うべきです。

-### Linux の `udev` ルール
+### Linux の `udev` ルール :id=linux-udev-rules

-Linux では、ブートローダデバイスと通信するには適切な権限が必要です。ファームウェアを書き込む時に `sudo` を使うか、`/etc/udev/rules.d/` にこのファイルを配置することで、通信することができます。
-
-**/etc/udev/rules.d/50-qmk.rules:**
-```
-# Atmel DFU
-### ATmega16U2
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FEF", TAG+="uaccess", RUN{builtin}+="uaccess"
-### ATmega32U2
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF0", TAG+="uaccess", RUN{builtin}+="uaccess"
-### ATmega16U4
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF3", TAG+="uaccess", RUN{builtin}+="uaccess"
-### ATmega32U4
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF4", TAG+="uaccess", RUN{builtin}+="uaccess"
-### AT90USB64
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF9", TAG+="uaccess", RUN{builtin}+="uaccess"
-### AT90USB128
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FFB", TAG+="uaccess", RUN{builtin}+="uaccess"
-
-# Input Club
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1C11", ATTRS{idProduct}=="B007", TAG+="uaccess", RUN{builtin}+="uaccess"
-
-# STM32duino
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1EAF", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess"
-# STM32 DFU
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="DF11", TAG+="uaccess", RUN{builtin}+="uaccess"
-
-# BootloadHID
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DF", TAG+="uaccess", RUN{builtin}+="uaccess"
-
-# USBAspLoader
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DC", TAG+="uaccess", RUN{builtin}+="uaccess"
-
-# ModemManager should ignore the following devices
-# Atmel SAM-BA (Massdrop)
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="6124", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-
-# Caterina (Pro Micro)
-## Spark Fun Electronics
-### Pro Micro 3V3/8MHz
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-### Pro Micro 5V/16MHz
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-### LilyPad 3V3/8MHz (and some Pro Micro clones)
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9207", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-## Pololu Electronics
-### A-Star 32U4
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1FFB", ATTRS{idProduct}=="0101", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-## Arduino SA
-### Leonardo
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-### Micro
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-## Adafruit Industries LLC
-### Feather 32U4
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000C", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-### ItsyBitsy 32U4 3V3/8MHz
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000D", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-### ItsyBitsy 32U4 5V/16MHz
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000E", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-## dog hunter AG
-### Leonardo
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-### Micro
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-```
+Linux では、ブートローダデバイスと通信するには適切な権限が必要です。ファームウェアを書き込む時に `sudo` を使うか(非推奨)、`/etc/udev/rules.d/` に[このファイル](https://github.com/qmk/qmk_firmware/tree/master/util/udev/50-qmk.rules)を配置することで、通信することができます。

 追加が完了したら、以下を実行します:

@@ -129,9 +65,9 @@ https://github.com/tmk/tmk_keyboard/issues/150
 - https://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1

 ### キーボードに書き込んだが何も起こらない、あるいはキーの押下が登録されない - ARM (rev6 planck、clueboard 60、hs60v2 など) でも同じ (Feb 2019)
-ARM ベースのチップ上での EEPROM の動作によって、保存された設定が無効になる場合があります。これはデフォルトレイヤに影響し、まだ調査中の特定の環境下でキーボードが使えなくなる*しれません*。EEPROM のリセットでこれが修正されます。
+ARM ベースのチップ上での EEPROM の動作によって、保存された設定が無効になる場合があります。これはデフォルトレイヤに影響し、まだ調査中の特定の環境下でキーボードが使えなくなるかも*しれません*。EEPROM のリセットでこれが修正されます。

-[Planck rev6 reset EEPROM](https://cdn.discordapp.com/attachments/473506116718952450/539284620861243409/planck_rev6_default.bin) を使って eeprom のリセットを強制することができます。このイメージを書き込んだ後で、通常のファームウェアを書き込むと、キーボードが_通常_ の動作順序に復元されます。
+[Planck rev6 reset EEPROM](https://cdn.discordapp.com/attachments/473506116718952450/539284620861243409/planck_rev6_default.bin) を使って eeprom のリセットを強制することができます。このイメージを書き込んだ後で、通常のファームウェアを書き込むと、キーボードが _通常_ の動作順序に復元されます。
 [Preonic rev3 reset EEPROM](https://cdn.discordapp.com/attachments/473506116718952450/537849497313738762/preonic_rev3_default.bin)

 いずれかの形式でブートマジックが有効になっている場合は、これも実行できるはずです (実行方法の詳細については、[ブートマジックドキュメント](ja/feature_bootmagic.md)とキーボード情報を見てください)。
--- a/docs/ja/getting_started_docker.md
+++ b/docs/ja/getting_started_docker.md
@@ -1,16 +1,17 @@
 # Docker クイックスタート

 <!---
-  original document: 0.9.32:docs/getting_started_docker.md
-  git diff 0.9.32 HEAD -- docs/getting_started_docker.md | cat
+  original document: 0.12.43:docs/getting_started_docker.md
+  git diff 0.12.43 HEAD -- docs/getting_started_docker.md | cat
 -->

 このプロジェクトは、プライマリオペレーティングシステムに大きな変更を加えることなくキーボードの新しいファームウェアを非常に簡単に構築することができる Docker ワークフローを含みます。これは、あなたがプロジェクトをクローンしビルドを実行した時に、他の人とまったく同じ環境と QMK ビルド基盤を持つことも保証します。これにより、人々はあなたが遭遇した問題の解決をより簡単に行えるようになります。

 ## 必要事項

-主な前提条件は動作する `docker` がインストールされていることです。
+主な前提条件は動作する `docker` または `podman` がインストールされていることです。
 * [Docker CE](https://docs.docker.com/install/#supported-platforms)
+* [Podman](https://podman.io/getting-started/installation)

 ## 使い方

@@ -29,7 +30,7 @@ util/docker_build.sh <keyboard>:<keymap>

 これは目的のキーボード/キーマップをコンパイルし、結果として書き込み用に `.hex` あるいは `.bin` ファイルを QMK ディレクトリの中に残します。`:keymap` が省略された場合は全てのキーマップが使われます。パラメータの形式は、`make` を使ってビルドする時と同じであることに注意してください。

-`target` を指定して Docker から直接キーボードをビルドし、_かつ_書き込むためのサポートもあります。
+`target` を指定して Docker から直接キーボードをビルドし、_かつ_ 書き込むためのサポートもあります。

 ```bash
 util/docker_build.sh keyboard:keymap:target
@@ -43,10 +44,17 @@ util/docker_build.sh
 # パラメータを入力として読み込みます (空白にすると全てのキーボード/キーマップ)
 ```

+`RUNTIME` 環境変数にコンテナランタイム名やパスを設定することで、使用したいコンテナランタイムを手動で設定できます。
+デフォルトでは docker や podman は自動的に検出され、podman より docker が優先されます。
+
+```bash
+RUNTIME="podman" util/docker_build.sh keyboard:keymap:target
+```
+
 ## FAQ

 ### なぜ Windows/macOS 上で書き込めないのですか？

 Windows と macOS では、実行するために [Docker Machine](http://gw.tnode.com/docker/docker-machine-with-usb-support-on-windows-macos/) が必要です。これはセットアップが面倒なので、お勧めではありません: 代わりに [QMK Toolbox](https://github.com/qmk/qmk_toolbox) を使ってください。

-!> Docker for Windows は[Hyper-V](https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/quick-start/enable-hyper-v) を有効にする必要があります。これは、Windows 7、Windows 8 および **Windows 10 Home** のような Hyper-V を搭載していない Windows のバージョンでは機能しないことを意味します。
+!> Docker for Windows は [Hyper-V](https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/quick-start/enable-hyper-v) を有効にする必要があります。これは、Windows 7、Windows 8 および **Windows 10 Home** のような Hyper-V を搭載していない Windows のバージョンでは機能しないことを意味します。
--- a/docs/ja/getting_started_github.md
+++ b/docs/ja/getting_started_github.md
@@ -1,8 +1,8 @@
 # QMK で GitHub を使う方法

 <!---
-  original document: 0.9.43:docs/getting_started_github.md
-  git diff 0.9.43 HEAD -- docs/getting_started_github.md | cat
+  original document: 0.12.43:docs/getting_started_github.md
+  git diff 0.12.43 HEAD -- docs/getting_started_github.md | cat
 -->

 GitHub は慣れていない人には少し注意が必要です - このガイドは、QMK におけるフォーク、クローン、プルリクエストのサブミットの各ステップについて説明します。
--- a/docs/ja/getting_started_make_guide.md
+++ b/docs/ja/getting_started_make_guide.md
@@ -1,8 +1,8 @@
 # より詳細な `make` 手順

 <!---
-  original document: 0.10.33:docs/getting_started_make_guide.md
-  git diff 0.10.33 HEAD -- docs/getting_started_make_guide.md | cat
+  original document: 0.12.43:docs/getting_started_make_guide.md
+  git diff 0.12.43 HEAD -- docs/getting_started_make_guide.md | cat
 -->

 `make` コマンドの完全な構文は `<keyboard_folder>:<keymap>:<target>` です:
@@ -19,16 +19,32 @@
 `<target>` は以下を意味します
 * target が指定されない場合は、以下の `all` と同じです
 * `all` は指定されたキーボード/リビジョン/キーマップの可能な全ての組み合わせのコンパイルを行います。例えば、`make planck/rev4:default` は1つの .hex を生成しますが、`make planck/rev4:all` は planck で利用可能な全てのキーマップについて hex を生成します。
-* `flash`、`dfu`、`teensy`、`avrdude`、`dfu-util` または `bootloadHID` はファームウェアをコンパイルし、キーボードにアップロードします。コンパイルが失敗すると、何もアップロードされません。使用するプログラマはキーボードに依存します。ほとんどのキーボードでは `dfu` ですが、ChibiOS キーボードについては `dfu-util` 、標準的な Teensy については `teensy` を使います。キーボードに使うコマンドを見つけるには、キーボード固有の readme をチェックしてください。
-* **注意**: 一部のオペレーティングシステムではこれらのコマンドが機能するためには root アクセスが必要です。その場合、例えば `sudo make planck/rev4:default:flash` を実行する必要があります。
+* `flash`、`dfu`、`teensy`、`avrdude`、`dfu-util`、`bootloadHID` はファームウェアをコンパイルし、キーボードにアップロードします。コンパイルが失敗すると、何もアップロードされません。使用するプログラマはキーボードに依存します。ほとんどのキーボードでは `dfu` ですが、ChibiOS キーボードについては `dfu-util` 、標準的な Teensy については `teensy` を使います。キーボードに使うコマンドを見つけるには、キーボード固有の readme をチェックしてください。
+  利用可能なブートローダの詳細は[ファームウェアの書き込み](ja/flashing.md)ガイドを参照してください。
+  * **Note**:  一部のオペレーティングシステムでは、これらのコマンドが機能するためには特権アクセスが必要です。これは、root アクセスなしでこれらにアクセスするために [`udev ルール`](ja/faq_build.md#linux-udev-rules) を設定するか、あるいは root アクセスでコマンドを実行する (`sudo make planck/rev4:default:flash`) 必要があるかもしれないことを意味します。
 * `clean` は、全てをゼロからビルドするためにビルド出力フォルダを掃除します。説明できない問題がある場合は、通常のコンパイルの前にこれを実行してください。
+* `distclean` は、.hex ファイルと .bin ファイルを削除します。
+
+次のターゲットは開発者向けです:
+
+* `show_path` ソースとオブジェクトファイルのパスを表示します。
+* `dump_vars` makefile 変数をダンプします。
+* `objs-size` 個々のオブジェクトファイルのサイズを表示します。
+* `show_build_options` 'rules.mk' のオプションセットを表示します。
+* `check-md5` 生成されたバイナリファイルの md5 チェックサムを表示します。

 make コマンドの最後、つまり target の後に追加のオプションを追加することもできます

 * `make COLOR=false` - カラー出力をオフ
 * `make SILENT=true` - エラー/警告以外の出力をオフ
 * `make VERBOSE=true` - 全ての gcc のものを出力 (デバッグする必要が無い限り面白くありません)
-* `make EXTRAFLAGS=-E` - コンパイルせずにコードを前処理 (#define コマンドをデバッグしようとする場合に便利)
+* `make VERBOSE_LD_CMD=yes` - -v オプションを指定して ld コマンドを実行します。
+* `make VERBOSE_AS_CMD=yes` - -v オプションを指定して as コマンドを実行します。
+* `make VERBOSE_C_CMD=<c_source_file>` - 指定された C ソースファイルをコンパイルするときに -v オプションを追加します。
+* `make DUMP_C_MACROS=<c_source_file>` - 指定された C ソースファイルをコンパイルするときにプリプロセッサマクロをダンプします。
+* `make DUMP_C_MACROS=<c_source_file> > <logfile>` - 指定された C ソースファイルをコンパイルするときにプリプロセッサマクロを `<logfile>` にダンプします。
+* `make VERBOSE_C_INCLUDE=<c_source_file>` - 指定された C ソースファイルをコンパイルするときにインクルードされるファイル名をダンプします。
+* `make VERBOSE_C_INCLUDE=<c_source_file> 2> <logfile>` - 指定された C ソースファイルをコンパイルするときにインクルードされるファイル名を `<logfile>` にダンプします。

 make コマンド自体にもいくつかの追加オプションがあります。詳細は `make --help` を入力してください。最も有用なのはおそらく `-jx` です。これは複数の CPU を使ってコンパイルしたいことを指定し、`x` は使用したい CPU の数を表します。設定すると、特に多くのキーボード/キーマップをコンパイルしている場合は、コンパイル時間を大幅に短縮することができます。通常は、コンパイル中に他の作業を行うための余裕をもたせるために、持っている CPU の数より1つ少ない値に設定します。全てのオペレーティングシステムと make バージョンがオプションをサポートしているわけではないことに注意してください。

@@ -104,7 +120,7 @@ make コマンド自体にもいくつかの追加オプションがあります

 これにより、送信したい文字に対応するニーモニックを入力することで Unicode 文字を送信することができます。キーマップファイル内にマッピングテーブルを保持する必要があります。可能な全てのコードポイント( `0x10FFFF` まで)がサポートされます。

-詳細と制限については、[Unicode ページ](ja/feature_unicode.md) を見てください。
+詳細と制限については、[Unicode ページ](ja/feature_unicode.md)を見てください。

 `AUDIO_ENABLE`

@@ -116,11 +132,11 @@ C6 ピン(抽象化が必要)でオーディオ出力できます。詳細は[

 `API_SYSEX_ENABLE`

-これにより Quantum SYSEX API を使って文字列を送信することができます (どこに？)
+これにより Quantum SYSEX API を使って文字列を(どこかに？)送信することができます

 `KEY_LOCK_ENABLE`

-これは [キーロック](ja/feature_key_lock.md) を有効にします。
+これは[キーロック](ja/feature_key_lock.md)を有効にします。

 `SPLIT_KEYBOARD`

@@ -132,7 +148,7 @@ ARM ベースの分割キーボード用の標準分割通信ドライバはま

 `CUSTOM_MATRIX`

-デフォルトのマトリックス走査ルーチンを独自のコードで置き換えます。詳細については、[カスタムマトリックスページ](ja/custom_matrix.md) を見てください。
+デフォルトのマトリックス走査ルーチンを独自のコードで置き換えます。詳細については、[カスタムマトリックスページ](ja/custom_matrix.md)を見てください。

 `DEBOUNCE_TYPE`

--- a/docs/ja/getting_started_vagrant.md
+++ b/docs/ja/getting_started_vagrant.md
@@ -1,8 +1,8 @@
 # Vagrant クイックスタート

 <!---
-  original document: 0.9.10:docs/getting_started_vagrant.md
-  git diff 0.9.10 HEAD -- docs/getting_started_vagrant.md | cat
+  original document: 0.12.43:docs/getting_started_vagrant.md
+  git diff 0.12.43 HEAD -- docs/getting_started_vagrant.md | cat
 -->

 このプロジェクトは、プライマリオペレーティングシステムに大きな変更を加えることなくキーボードの新しいファームウェアを非常に簡単に構築することができる `Vagrantfile` を含みます。これは、あなたがプロジェクトをクローンしビルドを実行した時に、ビルドのために Vagrantfile を使っている他のユーザと全く同じ環境を持つことも保証します。これにより、人々はあなたが遭遇した問題の解決をより簡単に行えるようになります。
@@ -12,16 +12,16 @@
 このリポジトリ内の `Vagrantfile` を使うには、[Vagrant](https://www.vagrantup.com/) およびサポートされるプロバイダがインストールされている必要があります:

 * [VirtualBox](https://www.virtualbox.org/) (バージョン 5.0.12 以降)
-   * 'Vagrant を使うために最もアクセスしやすいプラットフォーム' として販売
+   * 「Vagrant を使うために最もアクセスしやすいプラットフォーム」とうたわれています。
 * [VMware Workstation](https://www.vmware.com/products/workstation) および [Vagrant VMware プラグイン](https://www.vagrantup.com/vmware)
   * (有料) VMware プラグインには、ライセンスされた VMware Workstation/Fusion のコピーが必要です。
 * [Docker](https://www.docker.com/)

-Vagrant 以外に、適切なプロバイダがインストールされ、その後におそらくコンピュータを再起動すると、このプロジェクトをチェックアウトしたフォルダ内の任意の場所で 'vagrant up' を単純に実行することができ、このプロジェクトをビルドするのに必要な全てのツールが含まれる環境(仮想マシンあるいはコンテナ)が開始されます。Vagrant をうまく始めるためのヒントの投稿がありますが、それ以外に、以下のビルドドキュメントを参照することもできます。
+Vagrant 以外に、適切なプロバイダがインストールされ、その後におそらくコンピュータを再起動すると、このプロジェクトをチェックアウトしたフォルダ内の任意の場所で 'vagrant up' を単純に実行することができ、このプロジェクトをビルドするのに必要な全てのツールが含まれる環境(仮想マシンあるいはコンテナ)が開始されます。Vagrant 起動時にうまく始めるためのヒントが表示されますが、それ以外に、以下のビルドドキュメントを参照することもできます。

 ## ファームウェアの書き込み

-ファームウェアを書き込む"簡単"な方法は、ホスト OS からツールを使うことです:
+ファームウェアを書き込む「簡単な」方法は、ホスト OS からツールを使うことです:

 * [QMK Toolbox](https://github.com/qmk/qmk_toolbox) (推奨)
 * [Teensy ローダー](https://www.pjrc.com/teensy/loader.html)
--- a/docs/pr_checklist.md
+++ b/docs/pr_checklist.md
@@ -68,7 +68,7 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard
    - bare minimum required code for a board to boot into QMK should be present
        - initialisation code for the matrix and critical devices
        - mirroring existing functionality of a commercial board (like custom keycodes and special animations etc.) should be handled through non-`default` keymaps
-    - VIAL-related files or changes will not be accepted, as they are not used by QMK firmware (no VIAL-specific core code has been submitted or merged)
+    - Vial-related files or changes will not be accepted, as they are not used by QMK firmware (no Vial-specific core code has been submitted or merged)
 - `keyboard.c`
    - empty `xxxx_xxxx_kb()` or other weak-defined default implemented functions removed
    - commented-out functions removed too
--- a/drivers/oled/glcdfont.c
+++ b/drivers/oled/glcdfont.c
@@ -4,7 +4,7 @@
 // Online editor: http://teripom.x0.com/

 static const unsigned char font[] PROGMEM = {
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
+    0x07, 0x08, 0x7F, 0x08, 0x07, 0x00, 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
    0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
    0x72, 0x49, 0x49, 0x49, 0x46, 0x00, 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
    0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, 0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
--- a/keyboards/4pplet/eagle_viper_rep/info.json
+++ b/keyboards/4pplet/eagle_viper_rep/info.json
@@ -0,0 +1,77 @@
+{
+    "keyboard_name": "Eagle/Viper Rep",
+    "url": "https://github.com/4pplet/eagle_viper_rep",
+    "maintainer": "4pplet",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                { "label": "Esc", "x": 0, "y": 0 },
+                { "label": "!", "x": 1, "y": 0 },
+                { "label": "@", "x": 2, "y": 0 },
+                { "label": "#", "x": 3, "y": 0 },
+                { "label": "$", "x": 4, "y": 0 },
+                { "label": "%", "x": 5, "y": 0 },
+                { "label": "^", "x": 6, "y": 0 },
+                { "label": "&", "x": 7, "y": 0 },
+                { "label": "*", "x": 8, "y": 0 },
+                { "label": "(", "x": 9, "y": 0 },
+                { "label": ")", "x": 10, "y": 0 },
+                { "label": "_", "x": 11, "y": 0 },
+                { "label": "+", "x": 12, "y": 0 },
+                { "label": "|", "x": 13, "y": 0 },
+                { "label": "~", "x": 14, "y": 0 },
+                { "label": "Tab", "x": 0, "y": 1, "w": 1.5 },
+                { "label": "Q", "x": 1.5, "y": 1 },
+                { "label": "W", "x": 2.5, "y": 1 },
+                { "label": "E", "x": 3.5, "y": 1 },
+                { "label": "R", "x": 4.5, "y": 1 },
+                { "label": "T", "x": 5.5, "y": 1 },
+                { "label": "Y", "x": 6.5, "y": 1 },
+                { "label": "U", "x": 7.5, "y": 1 },
+                { "label": "I", "x": 8.5, "y": 1 },
+                { "label": "O", "x": 9.5, "y": 1 },
+                { "label": "P", "x": 10.5, "y": 1 },
+                { "label": "{", "x": 11.5, "y": 1 },
+                { "label": "}", "x": 12.5, "y": 1 },
+                { "label": "Backsp.", "x": 13.5, "y": 1, "w": 1.5 },
+                { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 },
+                { "label": "A", "x": 1.75, "y": 2 },
+                { "label": "S", "x": 2.75, "y": 2 },
+                { "label": "D", "x": 3.75, "y": 2 },
+                { "label": "F", "x": 4.75, "y": 2 },
+                { "label": "G", "x": 5.75, "y": 2 },
+                { "label": "H", "x": 6.75, "y": 2 },
+                { "label": "J", "x": 7.75, "y": 2 },
+                { "label": "K", "x": 8.75, "y": 2 },
+                { "label": "L", "x": 9.75, "y": 2 },
+                { "label": ":", "x": 10.75, "y": 2 },
+                { "label": "\"", "x": 11.75, "y": 2 },
+                { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 },
+                { "label": "Shift", "x": 0, "y": 3, "w": 1.25 },
+                { "label": "|", "x": 1.25, "y": 3 },
+                { "label": "Z", "x": 2.25, "y": 3 },
+                { "label": "X", "x": 3.25, "y": 3 },
+                { "label": "C", "x": 4.25, "y": 3 },
+                { "label": "V", "x": 5.25, "y": 3 },
+                { "label": "B", "x": 6.25, "y": 3 },
+                { "label": "N", "x": 7.25, "y": 3 },
+                { "label": "M", "x": 8.25, "y": 3 },
+                { "label": "<", "x": 9.25, "y": 3 },
+                { "label": ">", "x": 10.25, "y": 3 },
+                { "label": "?", "x": 11.25, "y": 3 },
+                { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 },
+                { "label": "Fn", "x": 14, "y": 3, "w": 1 },
+                { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 },
+                { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 },
+                { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 },
+                { "label": "Space", "x": 3.75, "y": 4, "w": 6.25 },
+                { "label": "Alt", "x": 10, "y": 4, "w": 1.25 },
+                { "label": "Menu", "x": 11.25, "y": 4, "w": 1.25 },
+                { "label": "Win", "x": 12.5, "y": 4, "w": 1.25 },
+                { "label": "Ctrl", "x": 13.75, "y": 4, "w": 1.25 }
+            ]
+        }
+    }
+}
--- a/keyboards/4pplet/eagle_viper_rep/keymaps/default/keymap.c
+++ b/keyboards/4pplet/eagle_viper_rep/keymaps/default/keymap.c
@@ -0,0 +1,34 @@
+/*
+Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+// main layer
+[0] = LAYOUT_all(
+  KC_ESC,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,       KC_6,      KC_7,      KC_8,      KC_9,       KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+  KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,       KC_Y,      KC_U,      KC_I,      KC_O,       KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+  KC_LCTRL, KC_A,     KC_S,     KC_D,     KC_F,     KC_G,       KC_H,      KC_J,      KC_K,      KC_L,       KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+  KC_LSFT,  KC_NUBS,  KC_Z,     KC_X,     KC_C,     KC_V,       KC_B,      KC_N,      KC_M,      KC_COMM,    KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
+  KC_LCTL,  KC_LGUI,  KC_LALT,                           KC_SPC,                                 KC_NO,      KC_RALT, KC_RGUI, MO(1)),
+  // basic function layer
+[1] = LAYOUT_all(
+  RESET,    KC_F1,    KC_F2,    KC_F3,    KC_F4,     KC_F5,     KC_F6,     KC_F7,     KC_F8,     KC_F9,      KC_F10,  KC_F11,   KC_F12,  KC_TRNS, KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
+  KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,                        KC_TRNS,                            KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS)
+};
--- a/keyboards/4pplet/eagle_viper_rep/keymaps/via/keymap.c
+++ b/keyboards/4pplet/eagle_viper_rep/keymaps/via/keymap.c
@@ -0,0 +1,55 @@
+/*
+Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+// main layer
+[0] = LAYOUT_all(
+  KC_ESC,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,       KC_6,      KC_7,      KC_8,      KC_9,       KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+  KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,       KC_Y,      KC_U,      KC_I,      KC_O,       KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+  KC_LCTRL, KC_A,     KC_S,     KC_D,     KC_F,     KC_G,       KC_H,      KC_J,      KC_K,      KC_L,       KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+  KC_LSFT,  KC_NUBS,  KC_Z,     KC_X,     KC_C,     KC_V,       KC_B,      KC_N,      KC_M,      KC_COMM,    KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
+  KC_LCTL,  KC_LGUI,  KC_LALT,                           KC_SPC,                                 KC_NO,      KC_RALT, KC_RGUI, MO(1)),
+// basic function layer
+[1] = LAYOUT_all(
+  RESET,    KC_F1,    KC_F2,    KC_F3,    KC_F4,     KC_F5,     KC_F6,     KC_F7,     KC_F8,     KC_F9,      KC_F10,  KC_F11,   KC_F12,  KC_TRNS, KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
+  KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RIGHT, KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,                          KC_TRNS,                             KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS),
+// extra layer for VIA
+[2] = LAYOUT_all(
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,                          KC_TRNS,                             KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS),
+// extra layer for VIA
+[3] = LAYOUT_all(
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,                          KC_TRNS,                             KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS),
+// extra layer for VIA
+[4] = LAYOUT_all(
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,   KC_TRNS,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
+  KC_TRNS,  KC_TRNS,  KC_TRNS,                         KC_TRNS,                             KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS)
+};
--- a/keyboards/4pplet/eagle_viper_rep/keymaps/via/rules.mk
+++ b/keyboards/4pplet/eagle_viper_rep/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
--- a/keyboards/4pplet/eagle_viper_rep/readme.md
+++ b/keyboards/4pplet/eagle_viper_rep/readme.md
@@ -0,0 +1,19 @@
+# Viper/Eagle REP Rev A
+
+A alternative PCB for Viper and Eagle V2 and V3
+
+* Keyboard Maintainer: [4pplet](https://github.com/4pplet)
+* Hardware Supported: Viper/Eagle REP Rev A
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 4pplet/eagle_viper_rep/rev_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+How to enter bootloader (DFU):
+* Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
+* Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.
+
+Alternative option if the firmware is already pre-flashed:
+* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.
--- a/keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h
+++ b/keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h
@@ -0,0 +1,23 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define CH_CFG_ST_FREQUENCY 10000
+
+#define CH_CFG_ST_RESOLUTION 16
+
+#include_next <chconf.h>
--- a/keyboards/4pplet/eagle_viper_rep/rev_a/config.h
+++ b/keyboards/4pplet/eagle_viper_rep/rev_a/config.h
@@ -0,0 +1,72 @@
+/*
+Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4444
+#define PRODUCT_ID      0x0007
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    4pplet
+#define PRODUCT         Eagle Viper REP Rev A
+
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 7
+
+#define MATRIX_COL_PINS { A0, B1, B0, A4, B5, B4, B3 }
+#define MATRIX_ROW_PINS { A2, A1, B8, A10, C15, A15, B7, B6, C14, C13}
+#define DIODE_DIRECTION COL2ROW
+
+/* In switch leds */
+#define BACKLIGHT_PIN           A3
+#define BACKLIGHT_PWM_DRIVER    PWMD2
+#define BACKLIGHT_PWM_CHANNEL   4
+#define BACKLIGHT_PAL_MODE      2
+#define BACKLIGHT_ON_STATE      1
+#define BACKLIGHT_LEVELS        10
+#define BACKLIGHT_BREATHING     TRUE
+
+/* Underglow */
+#define RGB_DI_PIN  A7
+#define WS2812_SPI  SPID1
+#define WS2812_SPI_MOSI_PAL_MODE 0
+#define WS2812_SPI_SCK_PIN A5
+#define WS2812_SPI_SCK_PAL_MODE 0
+#define RGBLED_NUM  16
+#define RGBLIGHT_ANIMATIONS
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Indicator leds */
+#define LOCK_LIGHTS     TRUE
+#define DISPLAY_LAYERS  TRUE
+#define CAPS_PIN        B2
+#define NUM_PIN         B12
+#define SCROLL_PIN      B13
+#define LAYER_1         B14
+#define LAYER_2         B15
+#define LAYER_3         A8
+#define LAYER_4         A9
+#define LAYER_5         B9
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Added extra layer for use of layer leds */
+#define DYNAMIC_KEYMAP_LAYER_COUNT 5
--- a/keyboards/4pplet/eagle_viper_rep/rev_a/halconf.h
+++ b/keyboards/4pplet/eagle_viper_rep/rev_a/halconf.h
@@ -0,0 +1,25 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define HAL_USE_I2C FALSE
+
+#define HAL_USE_PWM TRUE
+
+#define HAL_USE_SPI TRUE
+
+#include_next <halconf.h>
--- a/keyboards/4pplet/eagle_viper_rep/rev_a/mcuconf.h
+++ b/keyboards/4pplet/eagle_viper_rep/rev_a/mcuconf.h
@@ -0,0 +1,34 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i keyboards/cannonkeys/db60/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h`
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_PWM_USE_TIM2
+#define STM32_PWM_USE_TIM2 TRUE
+
+#undef STM32_SPI_USE_SPI1
+#define STM32_SPI_USE_SPI1 TRUE
+
+/* Reallocate the SysTick timer from TIM2 to TIM3, TIM2 is used for in switch leds */
+#undef STM32_ST_USE_TIMER
+#define STM32_ST_USE_TIMER 3
--- a/keyboards/4pplet/eagle_viper_rep/rev_a/readme.md
+++ b/keyboards/4pplet/eagle_viper_rep/rev_a/readme.md
@@ -0,0 +1,19 @@
+# Viper/Eagle REP Rev A
+
+A alternative PCB for Viper and Eagle V2 and V3
+
+* Keyboard Maintainer: [4pplet](https://github.com/4pplet)
+* Hardware Supported: Viper/Eagle REP Rev A
+
+Make example for this keyboard (after setting up your build environment):
+
+    make 4pplet/eagle_viper_rep/rev_a:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+How to enter bootloader (DFU):
+* Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
+* Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it.
+
+Alternative option if the firmware is already pre-flashed:
+* Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.
--- a/keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c
+++ b/keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c
@@ -0,0 +1,108 @@
+/*
+Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "rev_a.h"
+
+void board_init(void) {
+    setPinInputHigh(CAPS_PIN);
+    setPinInputHigh(SCROLL_PIN);
+    setPinInputHigh(NUM_PIN);
+}
+
+/* Set indicator leds to indicate lock states */
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if(res && LOCK_LIGHTS) {
+        if(led_state.caps_lock){
+            setPinOutput(CAPS_PIN);
+            writePin(CAPS_PIN, 0);
+        }
+        else
+            setPinInputHigh(CAPS_PIN);
+        if(led_state.scroll_lock){
+            setPinOutput(SCROLL_PIN);
+            writePin(SCROLL_PIN, 0);
+        }
+        else
+            setPinInputHigh(SCROLL_PIN);
+        if(led_state.num_lock){
+            setPinOutput(NUM_PIN);
+            writePin(NUM_PIN, 0);
+        }
+        else
+            setPinInputHigh(NUM_PIN);
+    }
+    return res;
+}
+
+layer_state_t layer_state_set_kb(layer_state_t state) {
+    state = layer_state_set_user(state);
+    if(DISPLAY_LAYERS){
+        setLayerLed(state);
+    }
+    return state;
+}
+/* Set indicator leds to indicate which layer is active */
+void setLayerLed(layer_state_t state){
+    switch(get_highest_layer(state)){
+        case 0 :
+            setPinOutput(LAYER_1);
+            writePin(LAYER_1, 0);
+            setPinInputHigh(LAYER_2);
+            setPinInputHigh(LAYER_3);
+            setPinInputHigh(LAYER_4);
+            setPinInputHigh(LAYER_5);
+            break;
+        case 1 :
+            setPinOutput(LAYER_2);
+            writePin(LAYER_2, 0);
+            setPinInputHigh(LAYER_1);
+            setPinInputHigh(LAYER_3);
+            setPinInputHigh(LAYER_4);
+            setPinInputHigh(LAYER_5);
+            break;
+        case 2 :
+            setPinOutput(LAYER_3);
+            writePin(LAYER_3, 0);
+            setPinInputHigh(LAYER_1);
+            setPinInputHigh(LAYER_2);
+            setPinInputHigh(LAYER_4);
+            setPinInputHigh(LAYER_5);
+            break;
+        case 3 :
+            writePin(LAYER_4, 0);
+            setPinInputHigh(LAYER_5);
+            setPinInputHigh(LAYER_1);
+            setPinInputHigh(LAYER_2);
+            setPinInputHigh(LAYER_3);
+            setPinOutput(LAYER_4);
+            break;
+        case 4 :
+            setPinOutput(LAYER_5);
+            writePin(LAYER_5, 0);
+            setPinInputHigh(LAYER_1);
+            setPinInputHigh(LAYER_2);
+            setPinInputHigh(LAYER_3);
+            setPinInputHigh(LAYER_4);
+            break;
+        default :
+            setPinInputHigh(LAYER_1);
+            setPinInputHigh(LAYER_2);
+            setPinInputHigh(LAYER_3);
+            setPinInputHigh(LAYER_4);
+            setPinInputHigh(LAYER_5);
+    }
+}
--- a/keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.h
+++ b/keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.h
@@ -0,0 +1,41 @@
+/*
+Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#pragma once
+
+#include "quantum.h"
+
+void setLayerLed(layer_state_t state);
+
+#define LAYOUT_all( \
+    k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k36, \
+    k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k56,\
+    k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k76,\
+    k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k96,\
+    k80, k90, k91, k93, k94, k85, k95, k86  \
+) \
+{ \
+    {k00, k01, k02, k03, k04, k05, k06}, \
+    {k10, k11, k12, k13, k14, k15, k16}, \
+    {k20, k21, k22, k23, k24, k25, k26}, \
+    {k30, k31, k32, k33, k34, k35, k36}, \
+    {k40, k41, k42, k43, k44, k45, k46}, \
+    {k50, k51, k52, k53, k54, k55, k56}, \
+    {k60, k61, k62, k63, k64, k65, k66}, \
+    {k70, k71, k72, k73, k74, k75, k76}, \
+    {k80, KC_NO, KC_NO, KC_NO, KC_NO, k85, k86}, \
+    {k90, k91, KC_NO, k93, k94, k95, k96}  \
+}
--- a/keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk
+++ b/keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk
@@ -0,0 +1,23 @@
+# MCU name
+MCU = STM32F072
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes   # Mouse keys
+EXTRAKEY_ENABLE = yes   # Audio control and System control
+CONSOLE_ENABLE = yes    # Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes       # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes
+BACKLIGHT_DRIVER = pwm
+RGBLIGHT_ENABLE = yes
+WS2812_DRIVER = spi
+
+# Wildcard to allow APM32 MCU
+DFU_SUFFIX_ARGS = -p FFFF -v FFFF
+
+# Enter lower-power sleep mode when on the ChibiOS idle thread
+OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
--- a/keyboards/aeboards/constellation/constellation.c
+++ b/keyboards/aeboards/constellation/constellation.c
@@ -1,4 +1,5 @@
 /* Copyright 2018 Jason Williams (Wilba)
+ * Copyright 2021 Harrison Chan (Xelus)
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -16,4 +17,4 @@

 // Nothing to see here, move along... ;-)

-#include "constellation.h"
+#include "constellation.h"
--- a/keyboards/aeboards/constellation/constellation.h
+++ b/keyboards/aeboards/constellation/constellation.h
@@ -1,4 +1,5 @@
 /* Copyright 2018 Jason Williams (Wilba)
+ * Copyright 2021 Harrison Chan (Xelus)
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -18,18 +19,8 @@

 #include "quantum.h"

-#define ____ KC_NO
-
-#define LAYOUT_all( \
-  K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, K014,  \
-  K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K114, \
-  K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             K214, \
-  K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K312,             K313, K314, \
-  K400, K401, K402,             K408,                   K409, K410,             K412, K413, K414  \
-) { \
-  { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
-  { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
-  { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
-  { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, ____, K312, K313, K314 }, \
-  { K400, K401, K402, ____, ____, ____, ____, ____, K408, K409, K410, ____, K412, K413, K414 } \
-}
+#if defined(KEYBOARD_aeboards_constellation_rev1)
+    #include "rev1.h"
+#elif defined(KEYBOARD_aeboards_constellation_rev2)
+    #include "rev2.h"
+#endif
--- a/keyboards/aeboards/constellation/rev1/config.h
+++ b/keyboards/aeboards/constellation/rev1/config.h
@@ -1,4 +1,5 @@
 /* Copyright 2018 Jason Williams (Wilba)
+ * Copyright 2021 Harrison Chan (Xelus)
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -23,7 +24,7 @@
 #define PRODUCT_ID      0x065C // 65 - Constellation
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    AEBoards
-#define PRODUCT         AEBoards Constellation
+#define PRODUCT         AEBoards Constellation Rev1

 /* key matrix size */
 #define MATRIX_ROWS 5
--- a/keyboards/aeboards/constellation/rev1/info.json
+++ b/keyboards/aeboards/constellation/rev1/info.json
--- a/keyboards/aeboards/constellation/rev1/readme.md
+++ b/keyboards/aeboards/constellation/rev1/readme.md
@@ -0,0 +1,20 @@
+# CONSTELLATION REV1
+
+A gasket 65% keyboard by [aeboards](https://aeboards.com/)
+
+* Keyboard Maintainer: [Xelus22](https://github.com/Xelus22)
+* Hardware Supported: CONSTELLATION
+* Hardware Availability: Custom keyboard group buys
+
+Make example for this keyboard (after setting up your build environment):
+
+    make aeboards/constellation/rev1:default
+
+Reset your keyboard in 3 ways:
+<ol>
+<li>Software reset on Fn + Backspace</li>
+<li>Bootmagic reset: hold down the top left key (usually escape) and plugin the keyboard</li>
+<li>Physical reset: on the back of the PCB, there is a ISP header which you should short the RST and GND together</li>
+</ol>
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- a/keyboards/aeboards/constellation/rev1/rev1.c
+++ b/keyboards/aeboards/constellation/rev1/rev1.c
@@ -0,0 +1,18 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ * Copyright 2021 Harrison Chan (Xelus)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rev1.h"
--- a/keyboards/aeboards/constellation/rev1/rev1.h
+++ b/keyboards/aeboards/constellation/rev1/rev1.h
@@ -0,0 +1,36 @@
+/* Copyright 2018 Jason Williams (Wilba)
+ * Copyright 2021 Harrison Chan (Xelus)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+#define LAYOUT_all( \
+  K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, K014,  \
+  K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K114, \
+  K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             K214, \
+  K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K312,             K313, K314, \
+  K400, K401, K402,             K408,                   K409, K410,             K412, K413, K414  \
+) { \
+  { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
+  { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
+  { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
+  { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, ____, K312, K313, K314 }, \
+  { K400, K401, K402, ____, ____, ____, ____, ____, K408, K409, K410, ____, K412, K413, K414 } \
+}
--- a/keyboards/aeboards/constellation/rev1/rules.mk
+++ b/keyboards/aeboards/constellation/rev1/rules.mk
@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+LTO_ENABLE = yes
--- a/keyboards/aeboards/constellation/rev2/config.h
+++ b/keyboards/aeboards/constellation/rev2/config.h
@@ -0,0 +1,61 @@
+/* Copyright 2021 Harrison Chan (Xelus)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4145 // AE
+#define PRODUCT_ID      0x065C // 65 - Constellation
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    AEBoards
+#define PRODUCT         AEBoards Constellation Rev2
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B15, A14, A2, B13, B14 }
+#define MATRIX_COL_PINS { B12, H0, C15, C14, B11, B10, B2, B1, B0, A7, A6, A5, A4, A3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+// I2C setup
+#define I2C1_SCL            8
+#define I2C1_SDA            9
+#define I2C1_SCL_PAL_MODE   4
+#define I2C1_SDA_PAL_MODE   4
+#define I2C1_TIMINGR_PRESC  0U
+#define I2C1_TIMINGR_SCLDEL 11U
+#define I2C1_TIMINGR_SDADEL 0U
+#define I2C1_TIMINGR_SCLH   14U
+#define I2C1_TIMINGR_SCLL   42U
+
+// I2C EEPROM
+#define EEPROM_I2C_24LC64
--- a/keyboards/aeboards/constellation/rev2/halconf.h
+++ b/keyboards/aeboards/constellation/rev2/halconf.h
@@ -0,0 +1,27 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i keyboards/aeboards/ext65/rev2/halconf.h -r platforms/chibios/common/configs/halconf.h`
+ */
+
+#pragma once
+
+#define HAL_USE_I2C TRUE
+
+#include_next <halconf.h>
+
--- a/keyboards/aeboards/constellation/rev2/info.json
+++ b/keyboards/aeboards/constellation/rev2/info.json
@@ -0,0 +1,85 @@
+{
+    "keyboard_name": "Constellation",
+    "url": "",
+    "maintainer": "Xelus22",
+    "width": 16,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0},
+                {"x":14, "y":0},
+                {"x":15, "y":0},
+
+                {"x":0, "y":1, "w":1.5},
+                {"x":1.5, "y":1},
+                {"x":2.5, "y":1},
+                {"x":3.5, "y":1},
+                {"x":4.5, "y":1},
+                {"x":5.5, "y":1},
+                {"x":6.5, "y":1},
+                {"x":7.5, "y":1},
+                {"x":8.5, "y":1},
+                {"x":9.5, "y":1},
+                {"x":10.5, "y":1},
+                {"x":11.5, "y":1},
+                {"x":12.5, "y":1},
+                {"x":13.5, "y":1, "w":1.5},
+                {"x":15, "y":1},
+
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"label":"\"", "x":11.75, "y":2},
+                {"x":12.75, "y":2, "w":2.25},
+                {"x":15, "y":2},
+
+                {"x":0, "y":3, "w":2.25},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3},
+                {"x":4.25, "y":3},
+                {"x":5.25, "y":3},
+                {"x":6.25, "y":3},
+                {"x":7.25, "y":3},
+                {"x":8.25, "y":3},
+                {"x":9.25, "y":3},
+                {"x":10.25, "y":3},
+                {"x":11.25, "y":3},
+                {"x":12.25, "y":3, "w":1.75},
+                {"x":14, "y":3},
+                {"x":15, "y":3},
+
+                {"x":0, "y":4, "w":1.25},
+                {"x":1.25, "y":4, "w":1.25},
+                {"x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"x":10, "y":4, "w":1.5},
+                {"x":11.5, "y":4, "w":1.5},
+                {"x":13, "y":4},
+                {"x":14, "y":4},
+                {"x":15, "y":4}
+            ]
+        }
+    }
+}
--- a/keyboards/aeboards/constellation/rev2/mcuconf.h
+++ b/keyboards/aeboards/constellation/rev2/mcuconf.h
@@ -0,0 +1,27 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i keyboards/aeboards/ext65/rev2/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h`
+ */
+
+#pragma once
+
+#include_next <mcuconf.h>
+
+#undef STM32_I2C_USE_I2C1
+#define STM32_I2C_USE_I2C1 TRUE
--- a/keyboards/aeboards/constellation/rev2/readme.md
+++ b/keyboards/aeboards/constellation/rev2/readme.md
@@ -0,0 +1,20 @@
+# CONSTELLATION REV2
+
+A gasket 65% keyboard by [aeboards](https://aeboards.com/)
+
+* Keyboard Maintainer: [Xelus22](https://github.com/Xelus22)
+* Hardware Supported: CONSTELLATION
+* Hardware Availability: Custom keyboard group buys
+
+Make example for this keyboard (after setting up your build environment):
+
+    make aeboards/constellation/rev2:default
+
+Reset your keyboard in 3 ways:
+<ol>
+<li>Software reset on Fn + Backspace</li>
+<li>Bootmagic reset: hold down the top left key (usually escape) and plugin the keyboard</li>
+<li>Physical reset button: on the back of the PCB, there are 2 open pins which you can short, labelled RESET</li>
+</ol>
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- a/keyboards/aeboards/constellation/rev2/rev2.c
+++ b/keyboards/aeboards/constellation/rev2/rev2.c
@@ -0,0 +1,21 @@
+/* Copyright 2021 Harrison Chan (Xelus)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "rev2.h"
+
+void matrix_io_delay(void) {
+    __asm__ volatile("nop\nnop\nnop\n");
+}
--- a/keyboards/aeboards/constellation/rev2/rev2.h
+++ b/keyboards/aeboards/constellation/rev2/rev2.h
@@ -0,0 +1,35 @@
+/* Copyright 2021 Harrison Chan (Xelus)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+#define LAYOUT_all( \
+  K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K213, K014,  \
+  K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       K114, \
+  K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,             K214, \
+  K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K312,             K313, K314, \
+  K400, K401, K402,             K408,                   K409, K410,             K412, K413, K414  \
+) { \
+  { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
+  { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \
+  { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
+  { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, ____, K312, K313, K314 }, \
+  { K400, K401, K402, ____, ____, ____, ____, ____, K408, K409, K410, ____, K412, K413, K414 } \
+}
--- a/keyboards/aeboards/constellation/rev2/rules.mk
+++ b/keyboards/aeboards/constellation/rev2/rules.mk
@@ -0,0 +1,20 @@
+# MCU name
+MCU = STM32L433
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+
+EEPROM_DRIVER = i2c
--- a/keyboards/aeboards/constellation/rules.mk
+++ b/keyboards/aeboards/constellation/rules.mk
@@ -1,22 +1 @@
-# MCU name
-MCU = atmega32u4
-
-# Bootloader selection
-BOOTLOADER = atmel-dfu
-
-# Build Options
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = yes        # Console for debug
-COMMAND_ENABLE = yes        # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes           # USB Nkey Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-BLUETOOTH_ENABLE = no       # Enable Bluetooth
-AUDIO_ENABLE = no           # Audio output
-LTO_ENABLE = yes
+DEFAULT_FOLDER = aeboards/constellation/rev1
--- a/keyboards/dztech/dz65rgb/v3/rules.mk
+++ b/keyboards/dztech/dz65rgb/v3/rules.mk
@@ -22,3 +22,4 @@ BLUETOOTH_ENABLE = no          # Enable Bluetooth
 AUDIO_ENABLE = no              # Audio output
 RGB_MATRIX_ENABLE = yes        # Use RGB matrix
 RGB_MATRIX_DRIVER = IS31FL3741
+LTO_ENABLE = yes
--- a/keyboards/geminate60/geminate60.h
+++ b/keyboards/geminate60/geminate60.h
@@ -15,16 +15,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #include "quantum.h"

-#define LAYOUT( \
-	K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, K013, K014,  \
-	K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, K113,        \
-	K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, K213,        \
-	K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K310, K311, K312, K313,        \
-	K40, K41, K42,                K46,                K410, K411, K412, K413       ) \
-    { \
-    {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K010, K011, K012, K013, K014}, \
-    {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K110, K111, K112, K113      }, \
-    {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K210, K211, K212, K213      }, \
-    {K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K310, K311, K312, K313      }, \
-    {K40, K41, K42,                K46,                K410, K411, K412, K413      } \
-    }
+#define ___ KC_NO
+
+#define LAYOUT_all( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
+    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,      \
+    K40, K41, K42,                K46,                K4A, K4B, K4C, K4D       \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, ___ }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, ___ }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, ___ }, \
+    { K40, K41, K42, ___, ___, ___, K46, ___, ___, ___, K4A, K4B, K4C, K4D, ___ }  \
+}
--- a/keyboards/geminate60/info.json
+++ b/keyboards/geminate60/info.json
@@ -1,27 +1,31 @@
 {
    "keyboard_name": "geminate60",
    "url": "",
-    "maintainer": "qmk",
+    "maintainer": "Weirdo-F",
    "width": 15,
    "height": 5,
+    "layout_aliases": {
+        "LAYOUT": "LAYOUT_all"
+    },
    "layouts": {
-        "LAYOUT": {
+        "LAYOUT_all": {
            "layout": [
                {"label":"K00", "x":0, "y":0},
                {"label":"K01", "x":1, "y":0},
                {"label":"K02", "x":2, "y":0},
-                {"label":"K0", "x":3, "y":0},
+                {"label":"K03", "x":3, "y":0},
                {"label":"K04", "x":4, "y":0},
                {"label":"K05", "x":5, "y":0},
                {"label":"K06", "x":6, "y":0},
                {"label":"K07", "x":7, "y":0},
                {"label":"K08", "x":8, "y":0},
                {"label":"K09", "x":9, "y":0},
-                {"label":"K010", "x":10, "y":0},
-                {"label":"K011", "x":11, "y":0},
-                {"label":"K012", "x":12, "y":0},
-                {"label":"K013", "x":13, "y":0},
-                {"label":"K014", "x":14, "y":0},
+                {"label":"K0A", "x":10, "y":0},
+                {"label":"K0B", "x":11, "y":0},
+                {"label":"K0C", "x":12, "y":0},
+                {"label":"K0D", "x":13, "y":0},
+                {"label":"K0E", "x":14, "y":0},
+
                {"label":"K10", "x":0, "y":1, "w":1.5},
                {"label":"K11", "x":1.5, "y":1},
                {"label":"K12", "x":2.5, "y":1},
@@ -32,10 +36,11 @@
                {"label":"K17", "x":7.5, "y":1},
                {"label":"K18", "x":8.5, "y":1},
                {"label":"K19", "x":9.5, "y":1},
-                {"label":"K110", "x":10.5, "y":1},
-                {"label":"K111", "x":11.5, "y":1},
-                {"label":"K112", "x":12.5, "y":1},
-                {"label":"K113", "x":13.5, "y":1, "w":1.5},
+                {"label":"K1A", "x":10.5, "y":1},
+                {"label":"K1B", "x":11.5, "y":1},
+                {"label":"K1C", "x":12.5, "y":1},
+                {"label":"K1D", "x":13.5, "y":1, "w":1.5},
+
                {"label":"K20", "x":0, "y":2, "w":1.75},
                {"label":"K21", "x":1.75, "y":2},
                {"label":"K22", "x":2.75, "y":2},
@@ -46,10 +51,11 @@
                {"label":"K27", "x":7.75, "y":2},
                {"label":"K28", "x":8.75, "y":2},
                {"label":"K29", "x":9.75, "y":2},
-                {"label":"K210", "x":10.75, "y":2},
-                {"label":"K211", "x":11.75, "y":2},
-                {"label":"K212", "x":12.75, "y":2},
-                {"label":"K213", "x":13.75, "y":2, "w":1.25},
+                {"label":"K2A", "x":10.75, "y":2},
+                {"label":"K2B", "x":11.75, "y":2},
+                {"label":"K2C", "x":12.75, "y":2},
+                {"label":"K2D", "x":13.75, "y":2, "w":1.25},
+
                {"label":"K30", "x":0, "y":3, "w":1.25},
                {"label":"K31", "x":1.25, "y":3},
                {"label":"K32", "x":2.25, "y":3},
@@ -60,20 +66,20 @@
                {"label":"K37", "x":7.25, "y":3},
                {"label":"K38", "x":8.25, "y":3},
                {"label":"K39", "x":9.25, "y":3},
-                {"label":"K310", "x":10.25, "y":3},
-                {"label":"K311", "x":11.25, "y":3},
-                {"label":"K312", "x":12.25, "y":3, "w":1.75},
-                {"label":"K313", "x":14, "y":3},
+                {"label":"K3A", "x":10.25, "y":3},
+                {"label":"K3B", "x":11.25, "y":3},
+                {"label":"K3C", "x":12.25, "y":3, "w":1.75},
+                {"label":"K3D", "x":14, "y":3},
+
                {"label":"K40", "x":0, "y":4, "w":1.25},
                {"label":"K41", "x":1.25, "y":4, "w":1.25},
                {"label":"K42", "x":2.5, "y":4, "w":1.25},
                {"label":"K46", "x":3.75, "y":4, "w":6.25},
-                {"label":"K410", "x":10, "y":4, "w":1.25},
-                {"label":"K411", "x":11.25, "y":4, "w":1.25},
-                {"label":"K412", "x":12.5, "y":4, "w":1.25},
-                {"label":"K413", "x":13.75, "y":4, "w":1.25}
+                {"label":"K4A", "x":10, "y":4, "w":1.25},
+                {"label":"K4B", "x":11.25, "y":4, "w":1.25},
+                {"label":"K4C", "x":12.5, "y":4, "w":1.25},
+                {"label":"K4D", "x":13.75, "y":4, "w":1.25}
            ]
        }
    }
-    ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/"
 }
--- a/keyboards/geminate60/keymaps/default/keymap.c
+++ b/keyboards/geminate60/keymaps/default/keymap.c
@@ -1,18 +1,18 @@
 /* Copyright 2020 Weirdo
-  * 
-  * This program is free software: you can redistribute it and/or modify 
-  * it under the terms of the GNU General Public License as published by 
-  * the Free Software Foundation, either version 2 of the License, or 
-  * (at your option) any later version. 
-  * 
-  * This program is distributed in the hope that it will be useful, 
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
-  * GNU General Public License for more details. 
-  * 
-  * You should have received a copy of the GNU General Public License 
-  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
-  */ 
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
 #include QMK_KEYBOARD_H


@@ -23,18 +23,22 @@ enum layer_names {
 };

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-        [_BASE] = LAYOUT(KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
-                         KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
-                         KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, 
-                         KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
-                         KC_LCTL, KC_LWIN, KC_LALT,KC_SPACE, KC_RALT, KC_RALT, KC_RWIN, KC_RCTL),

+    [_BASE] = LAYOUT_all(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
+        KC_LSFT, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
+        KC_LCTL, KC_LWIN, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RALT, KC_RWIN, KC_RCTL
+    ),

-        [_FN] = LAYOUT(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL,
-                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS,
-                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT),  //
+    [_FN] = LAYOUT_all(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT
+    ),

 };

--- a/keyboards/geminate60/keymaps/via/keymap.c
+++ b/keyboards/geminate60/keymaps/via/keymap.c
@@ -1,18 +1,18 @@
 /* Copyright 2020 Weirdo
-  * 
-  * This program is free software: you can redistribute it and/or modify 
-  * it under the terms of the GNU General Public License as published by 
-  * the Free Software Foundation, either version 2 of the License, or 
-  * (at your option) any later version. 
-  * 
-  * This program is distributed in the hope that it will be useful, 
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
-  * GNU General Public License for more details. 
-  * 
-  * You should have received a copy of the GNU General Public License 
-  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
-  */ 
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
 #include QMK_KEYBOARD_H


@@ -20,30 +20,39 @@
 enum layer_names { _BASE, _FN ,_FN1 ,_FN2 };

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-        [_BASE] = LAYOUT(KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC,
-                         KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
-                         KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
-                         KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
-                         KC_LCTL, KC_LWIN, KC_LALT, KC_SPACE,  KC_RALT, KC_RALT, KC_RWIN, KC_RCTL),

+    [_BASE] = LAYOUT_all(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT,
+        KC_LSFT, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
+        KC_LCTL, KC_LWIN, KC_LALT,                            KC_SPC,                             KC_RALT, KC_RALT, KC_RWIN, KC_RCTL
+    ),

-        [_FN] = LAYOUT(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL,
-                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, 
-                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS,
-                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT),  //
+    [_FN] = LAYOUT_all(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,  KC_DEL,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT
+    ),

-        [_FN1] = LAYOUT(KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                         KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+    [_FN1] = LAYOUT_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),
+
+    [_FN2] = LAYOUT_all(
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                            KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
+    ),

-        [_FN2] = LAYOUT(KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-                         KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
 };

 bool led_update_user(led_t led_state) {
--- a/keyboards/geminate60/readme.md
+++ b/keyboards/geminate60/readme.md
@@ -2,9 +2,9 @@

 ![Geminate60](https://www.hualigs.cn/image/600d9391f16d7.jpg)

-A 60% keyboard based on STM32f303
+A 60% keyboard based on STM32F303.

-* Keyboard Maintainer:  [Weirdo](https://weirdo-f.github.io)(https://github.com/1248314361)
+* Keyboard Maintainer:  [Weirdo](https://github.com/weirdo-f) ([weirdo-f.github.io](https://))
 * Hardware Supported: Geminate60
 * Hardware Availability: Not yet

--- a/keyboards/handwired/onekey/keymaps/oled/keymap.c
+++ b/keyboards/handwired/onekey/keymaps/oled/keymap.c
@@ -282,7 +282,7 @@ void test_slow_update(void) {
            if (++x >= oled_max_chars()) {
                x = 0;
                if (++y >= oled_max_lines()) {
-                    // The whole screen was filled - start the next phase.
+                    // The whole screen was filled - start the next phase.
                    ++phase;
                    x = y = 0;
                }
--- a/keyboards/handwired/onekey/keymaps/oled/readme.md
+++ b/keyboards/handwired/onekey/keymaps/oled/readme.md
@@ -11,7 +11,7 @@ Available commands using a single key:
 Available test patterns:
 - QMK logo (clipped to fit on the display).
 - Fill the whole screen with as much unique characters as possible (all 94 printable ASCII characters are used, and if the display has more character positions available, the same characters are printed again, but inverted).
- “Slow update” test — instead of updating the whole screen at once, draw things piece by piece to uncover display update bugs.  The drawing sequence used by this test:
+- “Slow update” test — instead of updating the whole screen at once, draw things piece by piece to uncover display update bugs.  The drawing sequence used by this test:
  - Fill the whole screen with printable ASCII characters (similar to the previous test, but characters are drawn one by one with 250 ms intervals between them, and inverted characters are not used to avoid obscuring the next phases).
  - Draw a frame along the screen edges, starting from the top left corner and going down along the left edge, then along the bottom, right and top edges, with 50 ms delay after every pixel.
  - Repeat the same sequence again, but with the character sequence shifted by 1 character (so that the updates would be visible).
--- a/keyboards/handwired/swiftrax/nodu/info.json
+++ b/keyboards/handwired/swiftrax/nodu/info.json
@@ -4,9 +4,12 @@
    "maintainer": "Swiftrax", 
    "width": 15, 
    "height": 5, 
+    "layout_aliases": {
+        "LAYOUT": "LAYOUT_60_ansi_split_bs_rshift"
+    },
    "layouts": {
-        "LAYOUT": {
+        "LAYOUT_60_ansi_split_bs_rshift": {
            "layout": [{"label":"0,0", "x":0, "y":0}, {"label":"0,1", "x":1, "y":0}, {"label":"0,2", "x":2, "y":0}, {"label":"0,3", "x":3, "y":0}, {"label":"0,4", "x":4, "y":0}, {"label":"0,5", "x":5, "y":0}, {"label":"0,6", "x":6, "y":0}, {"label":"0,7", "x":7, "y":0}, {"label":"0,8", "x":8, "y":0}, {"label":"0,9", "x":9, "y":0}, {"label":"0,A", "x":10, "y":0}, {"label":"0,B", "x":11, "y":0}, {"label":"0,C", "x":12, "y":0}, {"label":"0,D", "x":13, "y":0}, {"label":"2,D", "x":14, "y":0}, {"label":"1,0", "x":0, "y":1, "w":1.5}, {"label":"1,1", "x":1.5, "y":1}, {"label":"1,2", "x":2.5, "y":1}, {"label":"1,3", "x":3.5, "y":1}, {"label":"1,4", "x":4.5, "y":1}, {"label":"1,5", "x":5.5, "y":1}, {"label":"1,6", "x":6.5, "y":1}, {"label":"1,7", "x":7.5, "y":1}, {"label":"1,8", "x":8.5, "y":1}, {"label":"1,9", "x":9.5, "y":1}, {"label":"1,A", "x":10.5, "y":1}, {"label":"1,B", "x":11.5, "y":1}, {"label":"1,C", "x":12.5, "y":1}, {"label":"1,D", "x":13.5, "y":1, "w":1.5}, {"label":"2,0", "x":0, "y":2, "w":1.75}, {"label":"2,1", "x":1.75, "y":2}, {"label":"2,2", "x":2.75, "y":2}, {"label":"2,3", "x":3.75, "y":2}, {"label":"2,4", "x":4.75, "y":2}, {"label":"2,5", "x":5.75, "y":2}, {"label":"2,6", "x":6.75, "y":2}, {"label":"2,7", "x":7.75, "y":2}, {"label":"2,8", "x":8.75, "y":2}, {"label":"2,9", "x":9.75, "y":2}, {"label":"2,A", "x":10.75, "y":2}, {"label":"2,B", "x":11.75, "y":2}, {"label":"2,C", "x":12.75, "y":2, "w":2.25}, {"label":"3,0", "x":0, "y":3, "w":2.25}, {"label":"3,1", "x":2.25, "y":3}, {"label":"3,2", "x":3.25, "y":3}, {"label":"3,3", "x":4.25, "y":3}, {"label":"3,4", "x":5.25, "y":3}, {"label":"3,5", "x":6.25, "y":3}, {"label":"3,6", "x":7.25, "y":3}, {"label":"3,7", "x":8.25, "y":3}, {"label":"3,8", "x":9.25, "y":3}, {"label":"3,9", "x":10.25, "y":3}, {"label":"3,A", "x":11.25, "y":3}, {"label":"3,B", "x":12.25, "y":3, "w":1.75}, {"label":"3,C", "x":14, "y":3}, {"label":"4,0", "x":0, "y":4, "w":1.25}, {"label":"4,1", "x":1.25, "y":4, "w":1.25}, {"label":"4,2", "x":2.5, "y":4, "w":1.25}, {"label":"4,6", "x":3.75, "y":4, "w":6.25}, {"label":"4,8", "x":10, "y":4, "w":1.25}, {"label":"4,9", "x":11.25, "y":4, "w":1.25}, {"label":"4,A", "x":12.5, "y":4, "w":1.25}, {"label":"4,B", "x":13.75, "y":4, "w":1.25}]
        }
    }
-}
+}
--- a/keyboards/handwired/swiftrax/nodu/keymaps/default/keymap.c
+++ b/keyboards/handwired/swiftrax/nodu/keymaps/default/keymap.c
@@ -17,14 +17,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_H

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-   [0] = LAYOUT(
+   [0] = LAYOUT_60_ansi_split_bs_rshift(
    KC_GESC, KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSPC,
    KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSLS, 
    KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT , KC_DEL,
    KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, MO(1) , 
    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC ,          KC_RALT, KC_RGUI, MO(1)  , KC_RCTL
 ),
-   [1] = LAYOUT(
+   [1] = LAYOUT_60_ansi_split_bs_rshift(
    _______, KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 , _______,
    _______, _______, KC_UP  , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
    _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
--- a/keyboards/handwired/swiftrax/nodu/keymaps/via/keymap.c
+++ b/keyboards/handwired/swiftrax/nodu/keymaps/via/keymap.c
@@ -17,21 +17,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include QMK_KEYBOARD_H

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-   [0] = LAYOUT(
+   [0] = LAYOUT_60_ansi_split_bs_rshift(
    KC_GESC, KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , KC_BSPC,
    KC_TAB , KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSLS, 
    KC_CAPS, KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT , KC_DEL,
    KC_LSFT, KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, MO(1) , 
    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC ,          KC_RALT, KC_RGUI, MO(1)  , KC_RCTL
 ),
-   [1] = LAYOUT(
+   [1] = LAYOUT_60_ansi_split_bs_rshift(
    _______, KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 , _______,
    _______, _______, KC_UP  , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
    _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
    _______, _______, _______,                            _______,          _______, _______, _______, _______ 
 ),
-   [2] = LAYOUT(
+   [2] = LAYOUT_60_ansi_split_bs_rshift(
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
--- a/keyboards/handwired/swiftrax/nodu/nodu.h
+++ b/keyboards/handwired/swiftrax/nodu/nodu.h
@@ -20,7 +20,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #include "quantum.h"

-#define LAYOUT( \
+#define LAYOUT_60_ansi_split_bs_rshift( \
    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
--- a/keyboards/handwired/swiftrax/nodu/rules.mk
+++ b/keyboards/handwired/swiftrax/nodu/rules.mk
@@ -20,3 +20,5 @@ BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
+
+LAYOUTS = 60_ansi_split_bs_rshift
--- a/keyboards/hub20/config.h
+++ b/keyboards/hub20/config.h
@@ -1,5 +1,6 @@
 /*
-Copyright 2020 joshajohnson
+Copyright 2020 joshajohnson 
+Copyright 2021 peepeetee

 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -41,29 +42,56 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.

 #define RGB_DI_PIN B15
 #define RGBLED_NUM 27
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-#define RGBLIGHT_SLEEP         /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-#define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-// #define RGBLIGHT_EFFECT_BREATHING
-// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-// #define RGBLIGHT_EFFECT_SNAKE
-// #define RGBLIGHT_EFFECT_KNIGHT
-// #define RGBLIGHT_EFFECT_CHRISTMAS
-// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-// #define RGBLIGHT_EFFECT_RGB_TEST
-// #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+
+#define DRIVER_LED_TOTAL 27
+#ifdef RGB_DI_PIN
+    #define RGBLED_NUM 27
+#endif
+
+#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#define RGB_MATRIX_KEYPRESSES
+
+// This list in in the correct mode order. Next mode is the following line, previous mode is previous line. Loops around.
+// #define DISABLE_RGB_MATRIX_SOLID_COLOR                   // Static single hue, no speed support
+#define DISABLE_RGB_MATRIX_ALPHAS_MODS                   // Static dual hue, speed is hue for secondary hue
+//#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN              // Static gradient top to bottom, speed controls how much gradient changes
+//#define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT           // Static gradient top to bottom, speed controls how much gradient changes
+//#define DISABLE_RGB_MATRIX_BREATHING                     // Single hue brightness cycling animation
+#define DISABLE_RGB_MATRIX_BAND_SAT                      // Single hue band fading saturation scrolling left to right
+#define DISABLE_RGB_MATRIX_BAND_VAL                      // Single hue band fading brightness scrolling left to right
+#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT             // Single hue 3 blade spinning pinwheel fades saturation
+#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL             // Single hue 3 blade spinning pinwheel fades brightness
+#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT               // Single hue spinning spiral fades saturation
+#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL               // Single hue spinning spiral fades brightness
+#define DISABLE_RGB_MATRIX_CYCLE_ALL                     // Full keyboard solid hue cycling through full gradient
+//#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT              // Full gradient scrolling left to right
+//#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN                 // Full gradient scrolling top to bottom
+#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON        // Full gradent Chevron shapped scrolling left to right
+#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN                  // Full gradient scrolling out to in
+#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL             // Full dual gradients scrolling out to in
+#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL                // Full gradient spinning pinwheel around center of keyboard
+#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL                  // Full gradient spinning spiral around center of keyboard
+#define DISABLE_RGB_MATRIX_DUAL_BEACON                   // Full gradient spinning around center of keyboard
+#define DISABLE_RGB_MATRIX_RAINBOW_BEACON                // Full tighter gradient spinning around center of keyboard
+#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS             // Full dual gradients spinning two halfs of keyboard
+//#define DISABLE_RGB_MATRIX_RAINDROPS                     // Randomly changes a single key's hue
+//#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS           // Randomly changes a single key's hue and saturation
+// =================================================== Requires RGB_MATRIX_FRAMEBUFFER_EFFECTS =============================================================
+// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP                // How hot is your WPM!
+//#define DISABLE_RGB_MATRIX_DIGITAL_RAIN                  // That famous computer simulation
+// =================================================== RGB_MATRIX_KEYPRESSES OR RGB_MATRIX_KEYRELEASES =====================================================
+//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE         // Pulses keys hit to hue & value then fades value out
+//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE                // Static single hue, pulses keys hit to shifted hue then fades to current hue
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE           // Hue & value pulse near a single key hit then fades value out
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE      // Hue & value pulse near multiple key hits then fades value out
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS          // Hue & value pulse the same column and row of a single key hit then fades value out
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS     // Hue & value pulse the same column and row of multiple key hits then fades value out
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS          // Hue & value pulse away on the same column and row of a single key hit then fades value out
+#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS     // Hue & value pulse away on the same column and row of multiple key hits then fades value out
+#define DISABLE_RGB_MATRIX_SPLASH                        // Full gradient & value pulse away from a single key hit then fades value out
+#define DISABLE_RGB_MATRIX_MULTISPLASH                   // Full gradient & value pulse away from multiple key hits then fades value out
+#define DISABLE_RGB_MATRIX_SOLID_SPLASH                  // Hue & value pulse away from a single key hit then fades value out
+#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH             // Hue & value pulse away from multiple key hits then fades value out

 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
--- a/keyboards/hub20/hub20.c
+++ b/keyboards/hub20/hub20.c
@@ -1,4 +1,4 @@
-/* Copyright 2020 joshajohnson
+/* Copyright 2020 joshajohnson 2021 peepeetee
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -16,3 +16,156 @@

 #include "hub20.h"

+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+    // Key Matrix to LED Index
+    {NO_LED,NO_LED,NO_LED,NO_LED},
+    { 7,      8,      9,     10},
+    { 11,    12,     13,     14},
+    { 15,    16,     17,     18},
+    { 19,    20,     21,     22},
+    { 23,    24,     25,     26}
+    //todo: assign leds to keys differently for the different layouts
+}, {
+    // LED Index to Physical Position
+    { 190, 50}, { 111, 50}, { 35, 50}, {38, 0}, {38, 35}, {186, 35}, {186, 0}, // UNDERGLOW
+    //todo: underglow location needs to be recalculated. The top row is above row 4, and for now they have the same y value 0
+    {  0,  0}, {75,  0}, {150,  0}, {225,  0}, // row 4
+    {  0, 16}, {75, 16}, {150, 16}, {225, 16}, // row 3
+    {  0, 32}, {75, 32}, {150, 32}, {225, 32}, // row 2
+    {  0, 48}, {75, 48}, {150, 48}, {225, 48}, // row 1
+    {  0, 64}, {75, 64}, {150, 64}, {225, 64}  // row 0
+
+}, {
+    // LED Index to Flag
+    LED_FLAG_UNDERGLOW, LED_FLAG_UNDERGLOW, LED_FLAG_UNDERGLOW, LED_FLAG_UNDERGLOW, LED_FLAG_UNDERGLOW, LED_FLAG_UNDERGLOW, LED_FLAG_UNDERGLOW,  // UNDERGLOW
+    LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,           // row 4
+    LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,           // row 3
+    LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,           // row 2
+    LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT,           // row 1
+    LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT            // row 0
+
+} };
+#endif
+
+
+
+// #if LED_MERGE_NUMPAD_LEFT_HANDED_ENTER && LED_MERGE_NUMPAD_RIGHT_HANDED_ZERO
+// #error lower left enter conflicts with lower left zero
+// #endif
+
+// #if LED_MERGE_NUMPAD_RIGHT_HANDED_ENTER && LED_MERGE_NUMPAD_LEFT_HANDED_ZERO
+// #error lower right enter conflicts with lower right zero
+// #endif
+
+//     /* LAYOUT_left_handed
+
+
+//      *     ┌───┬───┐
+//      *     │01 │02 │
+//      * ┌───┼───┼───┼───┐
+//      * │10 │11 │12 │13 │
+//      * ├───┼───┼───┼───┤
+//      * │   │21 │22 │23 │
+//      * │20 ├───┼───┼───┤
+//      * │   │31 │32 │33 │
+//      * ├───┼───┼───┼───┤
+//      * │   │41 │42 │43 │
+//      * │40 ├───┼───┴───┤
+//      * │   │51 │  52   │
+//      * └───┴───┴───────┘
+//      */
+
+// #ifndef LED_MERGE_NUMPAD_LEFT_HANDED_PLUS //key 20
+// #define LED_MERGE_NUMPAD_LEFT_HANDED_PLUS FALSE
+// #endif // LED_MERGE_NUMPAD_LEFT_HANDED_PLUS
+
+// #ifndef LED_MERGE_NUMPAD_LEFT_HANDED_ENTER //key 40
+// #define LED_MERGE_NUMPAD_LEFT_HANDED_ENTER FALSE
+// #endif // LED_MERGE_NUMPAD_LEFT_HANDED_ENTER
+
+// #ifndef LED_MERGE_NUMPAD_LEFT_HANDED_ZERO //key 52
+// #define LED_MERGE_NUMPAD_LEFT_HANDED_ZERO FALSE
+// #endif // LED_MERGE_NUMPAD_LEFT_HANDED_ZERO
+
+
+//     /* LAYOUT_right_handed
+
+
+//      *     ┌───┬───┐
+//      *     │01 │02 │
+//      * ┌───┼───┼───┼───┐
+//      * │10 │11 │12 │13 │
+//      * ├───┼───┼───┼───┤
+//      * │20 │21 │22 │   │
+//      * ├───┼───┼───┤23 │
+//      * │30 │31 │32 │   │
+//      * ├───┼───┼───┼───┤
+//      * │40 │41 │42 │   │
+//      * ├───┴───┼───┤43 │
+//      * │  50   │52 │   │
+//      * └───────┴───┴───┘
+//      */
+//         //LOCATION OF bottom row 0 NOT TESTED, WAITING ENDORSEMENT FROM MANUFACTURER
+
+// #ifndef LED_MERGE_NUMPAD_RIGHT_HANDED_PLUS // key 23
+// #define LED_MERGE_NUMPAD_RIGHT_HANDED_PLUS FALSE
+// #endif // LED_MERGE_NUMPAD_RIGHT_HANDED_PLUS
+
+// #ifndef LED_MERGE_NUMPAD_RIGHT_HANDED_ENTER // key 43
+// #define LED_MERGE_NUMPAD_RIGHT_HANDED_ENTER FALSE
+// #endif // LED_MERGE_NUMPAD_RIGHT_HANDED_ENTER
+
+// #ifndef LED_MERGE_NUMPAD_RIGHT_HANDED_ZERO // key 50 (confirm with manufacturer)
+// #define LED_MERGE_NUMPAD_RIGHT_HANDED_ZERO FALSE
+// #endif // LED_MERGE_NUMPAD_RIGHT_HANDED_ZERO
+
+// uint8_t rgb_matrix_map_row_column_to_led_kb(uint8_t row, uint8_t column, uint8_t *led_i) {
+// // Keys here have 2 leds. Here we add the led that is not bound to the key
+// // and the default led would be added
+// // by the default code that runs after this in rgb_matrix_map_row_column_to_led
+
+// uint8_t counter = 0;
+
+// #if LED_MERGE_NUMPAD_LEFT_HANDED_PLUS //key 20, leds 7 and 11, 7 already bound
+
+//     if (row == 2 && column == 0) {
+//         led_i[counter] = 11;
+//         counter ++;
+//     }
+// #endif
+// #if LED_MERGE_NUMPAD_LEFT_HANDED_ENTER //key 40, leds 19 and 23, 23 already bound
+//     if (row == 4 && column == 0) {
+//         led_i[counter] = 23;
+//         counter ++;
+//     }
+// #endif
+// #if LED_MERGE_NUMPAD_LEFT_HANDED_ZERO //key 52, leds 25 and 26, 26 already bound
+//     if (row == 5 && column == 2) {
+//         led_i[counter] = 26;
+//         counter ++;
+//     }
+// #endif
+
+// #if LED_MERGE_NUMPAD_RIGHT_HANDED_PLUS // key 23, led 14 and 18, 14 already bound
+//     if (row == 2 && column == 3) {
+//         led_i[counter] = 18;
+//         counter ++;
+//     }
+// #endif
+// #if LED_MERGE_NUMPAD_RIGHT_HANDED_ENTER // key 43, led 22 and 26, 22 already bound
+//     if (row == 4 && column == 3) {
+//         led_i[counter] = 26;
+//         counter ++;
+//     }
+// #endif
+// #if LED_MERGE_NUMPAD_RIGHT_HANDED_ZERO  // key 50 (confirm with manufacturer)
+// // LED 23 and 24, 23(?) already bound
+//     if (row == 5 && column == 0) {
+//         led_i[counter] = 24;
+//         counter ++;
+//     }
+// #endif
+//     return counter;
+// }
--- a/keyboards/hub20/hub20.h
+++ b/keyboards/hub20/hub20.h
@@ -29,6 +29,24 @@
 * represents the switch matrix.
 */

+
+    /* LAYOUT_all
+
+
+     *     ┌───┬───┐ 
+     *     │01 │02 │    
+     * ┌───┼───┼───┼───┐
+     * │10 │11 │12 │13 │
+     * ├───┼───┼───┼───┤
+     * │20 │21 │22 │23 │
+     * ├───┼───┼───┼───┤
+     * │30 │31 │32 │33 │
+     * ├───┼───┼───┼───┤
+     * │40 │41 │42 │43 │
+     * ├───┼───┼───┼───┤
+     * │50 │51 │52 │53 │
+     * └───┴───┴───┴───┘
+     */
 #define LAYOUT_all(   \
      K01,      K02,    \
    K10, K11, K12, K13, \
@@ -45,3 +63,75 @@
    { K40, K41, K42, K43, }, \
    { K50, K51, K52, K53, }, \
 }
+
+    /* LAYOUT_left_handed
+
+
+     *     ┌───┬───┐ 
+     *     │01 │02 │    
+     * ┌───┼───┼───┼───┐
+     * │10 │11 │12 │13 │
+     * ├───┼───┼───┼───┤
+     * │   │21 │22 │23 │
+     * │20 ├───┼───┼───┤
+     * │   │31 │32 │33 │
+     * ├───┼───┼───┼───┤
+     * │   │41 │42 │43 │
+     * │40 ├───┼───┴───┤
+     * │   │51 │  52   │
+     * └───┴───┴───────┘
+     */
+#define LAYOUT_left_handed(   \
+      K01,      K02,    \
+    K10, K11, K12, K13, \
+         K21, K22, K23, \
+    K20, K31, K32, K33, \
+         K41, K42, K43, \
+    K40, K51, K52       \
+) \
+{ \
+    { ___, K01, K02, ___, }, \
+    { K10, K11, K12, K13, }, \
+    { K20, K21, K22, K23, }, \
+    { ___, K31, K32, K33, }, \
+    { K40, K41, K42, K43, }, \
+    { ___, K51, K52, ___, }, \
+}
+
+
+    /* LAYOUT_right_handed
+
+
+     *     ┌───┬───┐ 
+     *     │01 │02 │    
+     * ┌───┼───┼───┼───┐
+     * │10 │11 │12 │13 │
+     * ├───┼───┼───┼───┤
+     * │20 │21 │22 │   │
+     * ├───┼───┼───┤23 │
+     * │30 │31 │32 │   │
+     * ├───┼───┼───┼───┤
+     * │40 │41 │42 │   │
+     * ├───┴───┼───┤43 │
+     * │  50(not sure, confirm)   │52 │   │
+     * └───────┴───┴───┘
+     */
+        //NOT TESTED, WAITING ENDORSEMENT FROM MANUFACTURER
+#define LAYOUT_right_handed(   \
+      K01,      K02,    \
+    K10, K11, K12, K13, \
+    K20, K21, K22,      \
+    K30, K31, K32, K23, \
+    K40, K41, K42,      \
+    K50,      K52, K43  \
+) \
+{ \
+    { ___, K01, K02, ___, }, \
+    { K10, K11, K12, K13, }, \
+    { K20, K21, K22, K23, }, \
+    { K30, K31, K32, ___, }, \
+    { K40, K41, K42, K43, }, \
+    { K50, ___, K52, ___, }, \
+}
+
+
--- a/keyboards/hub20/info.json
+++ b/keyboards/hub20/info.json
@@ -30,6 +30,56 @@
          {"label":"0", "x":2, "y":5},
          {"label":"0", "x":3, "y":5}
        ]
+      },
+      "LAYOUT_left_handed": {
+        "layout": [
+          {"label":"Mute", "x":0.5, "y":0},
+          {"label":"Play / Pause", "x":2.5, "y":0},
+          {"label":"-", "x":0, "y":1},
+          {"label":"*", "x":1, "y":1},
+          {"label":"/", "x":2, "y":1},
+          {"label":"Numlock", "x":3, "y":1},
+          {"label":"7", "x":1, "y":2},
+          {"label":"8", "x":2, "y":2},
+          {"label":"9", "x":3, "y":2},
+          {"label":"+", "x":0, "y":2, "h":2},
+          {"label":"4", "x":1, "y":3},
+          {"label":"5", "x":2, "y":3},
+          {"label":"6", "x":3, "y":3},
+          {"label":"Enter", "x":0, "y":4, "h":2},
+          {"label":"1", "x":1, "y":4},
+          {"label":"2", "x":2, "y":4},
+          {"label":"3", "x":3, "y":4},
+          {"label":".", "x":1, "y":5},
+          {"label":"0", "x":3, "y":5, "w":2}
+        ]
+      },
+      "LAYOUT_right_handed": {
+        "layout": [
+          {"label":"Mute",         "x":0.5, "y":0},
+          {"label":"Play / Pause", "x":2.5, "y":0},
+          {"label":"Numlock",      "x":0, "y":1},
+          {"label":"/",            "x":1, "y":1},
+          {"label":"*",            "x":2, "y":1},
+          {"label":"-",            "x":3, "y":1},
+            
+          {"label":"7",            "x":0, "y":2},
+          {"label":"8",            "x":1, "y":2},
+          {"label":"9",            "x":2, "y":2},
+            
+          {"label":"4",            "x":0, "y":3},
+          {"label":"5",            "x":1, "y":3},
+          {"label":"6",            "x":2, "y":3},
+          {"label":"+",            "x":3, "y":2, "h":2},
+
+          {"label":"1",            "x":0, "y":4},
+          {"label":"2",            "x":1, "y":4},
+          {"label":"3",            "x":2, "y":4},
+
+          {"label":"0",            "x":0, "y":5, "w":2},
+          {"label":".",            "x":2, "y":5},
+          {"label":"Enter",        "x":3, "y":4, "h":2}
+        ]
      }
    }
 }
--- a/keyboards/hub20/keymaps/left_hand_numpad/keymap.c
+++ b/keyboards/hub20/keymaps/left_hand_numpad/keymap.c
@@ -0,0 +1,61 @@
+/* Copyright 2020 joshajohnson 2021 peepeetee
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+
+// #define LED_MERGE_NUMPAD_LEFT_HANDED_PLUS TRUE
+// #define LED_MERGE_NUMPAD_LEFT_HANDED_ENTER TRUE
+// #define LED_MERGE_NUMPAD_LEFT_HANDED_ZERO TRUE
+
+
+#define MO_NLCK LT(1, KC_NLCK) // Numlock on tap, layer change on hold
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_left_handed(
+                 KC_MUTE,  KC_MPLY,
+       KC_PMNS,  KC_PAST,  KC_PSLS,    MO_NLCK,
+                   KC_P7,    KC_P8,      KC_P9,
+       KC_PPLS,    KC_P4,    KC_P5,      KC_P6,
+                   KC_P1,    KC_P2,      KC_P3,
+       KC_PENT,  KC_PDOT,    KC_P0
+),
+    [1] = LAYOUT_left_handed(
+                   RESET,  _______,
+       RGB_TOG, RGB_RMOD,  RGB_MOD,    _______,
+       _______,  RGB_VAD,  RGB_VAI,    _______,
+                 RGB_HUD,  RGB_HUI,    _______,
+       _______,  RGB_SAD,  RGB_SAI,    _______,
+                 _______,        _______
+)
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* Left Encoder */
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+    } else if (index == 1) { /* Right Encoder */
+        if (clockwise) {
+            tap_code(KC_MNXT);
+        } else {
+            tap_code(KC_MPRV);
+        }
+    }
+}
+
--- a/keyboards/hub20/keymaps/right_hand_numpad/keymap.c
+++ b/keyboards/hub20/keymaps/right_hand_numpad/keymap.c
@@ -0,0 +1,66 @@
+/* Copyright 2021 peepeetee
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+
+// #define LED_MERGE_NUMPAD_RIGHT_HANDED_PLUS TRUE
+// #define LED_MERGE_NUMPAD_RIGHT_HANDED_ENTER TRUE
+// #define LED_MERGE_NUMPAD_RIGHT_HANDED_ZERO TRUE
+
+
+#define MO_NLCK LT(1, KC_NLCK) // Numlock on tap, layer change on hold
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+//NOT TESTED, WAITING ENDORSEMENT FROM MANUFACTURER
+    [0] = LAYOUT_right_handed(
+                 KC_MUTE,  KC_MPLY,
+        MO_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_P7,   KC_P8,   KC_P9,
+        KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_P1,   KC_P2,   KC_P3,
+        KC_P0,   KC_PDOT,          KC_PENT
+),
+    [1] = LAYOUT_right_handed(
+                   RESET,  _______,
+       RGB_TOG, RGB_RMOD,  RGB_MOD,    _______,
+       _______,  RGB_VAD,  RGB_VAI,
+       _______,  RGB_HUD,  RGB_HUI,    _______,
+       _______,  RGB_SAD,  RGB_SAI,
+           _______,        _______,    _______
+)
+};
+
+
+
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* Left Encoder */
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+    } else if (index == 1) { /* Right Encoder */
+        if (clockwise) {
+            tap_code(KC_MNXT);
+        } else {
+            tap_code(KC_MPRV);
+        }
+    }
+}
+
--- a/keyboards/hub20/rules.mk
+++ b/keyboards/hub20/rules.mk
@@ -10,16 +10,18 @@ BOOTLOADER = stm32-dfu
 BOOTMAGIC_ENABLE = lite       # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes       # Mouse keys
 EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = yes        # Console for debug
-COMMAND_ENABLE = yes        # Commands for debug and configuration
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+RGBLIGHT_ENABLE = no       # Enable keyboard RGB underglow
 BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
+RGB_MATRIX_ENABLE = yes
+RGB_MATRIX_DRIVER = WS2812
 ENCODER_ENABLE = yes

 # Enter lower-power sleep mode when on the ChibiOS idle thread
--- a/keyboards/id80/info.json
+++ b/keyboards/id80/info.json
@@ -6,60 +6,145 @@
    "height": 6.5,
    "layouts": {
        "LAYOUT": {
-            "key_count": 80,
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"Fn", "x":14, "y":0}, {"label":"Insert", "x":15.25, "y":0}, {"label":"`", "x":0, "y":1.25}, {"label":"1", "x":1, "y":1.25}, {"label":"2", "x":2, "y":1.25}, {"label":"3", "x":3, "y":1.25}, {"label":"4", "x":4, "y":1.25}, {"label":"5", "x":5, "y":1.25}, {"label":"6", "x":6, "y":1.25}, {"label":"7", "x":7, "y":1.25}, {"label":"8", "x":8, "y":1.25}, {"label":"9", "x":9, "y":1.25}, {"label":"0", "x":10, "y":1.25}, {"label":"-", "x":11, "y":1.25}, {"label":"=", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Home", "x":15.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"[", "x":11.5, "y":2.25}, {"label":"]", "x":12.5, "y":2.25}, {"label":"\\", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":";", "x":10.75, "y":3.25}, {"label":"'", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":",", "x":9.25, "y":4.25}, {"label":".", "x":10.25, "y":4.25}, {"label":"/", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"label":"\u2191", "x":14.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.5}, {"label":"Ctrl", "x":11.5, "y":5.25, "w":1.5}, {"label":"\u2190", "x":13.25, "y":5.5}, {"label":"\u2193", "x":14.25, "y":5.5}, {"label":"\u2192", "x":15.25, "y":5.5}]
+            "layout": [
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"F1", "x":1.25, "y":0},
+                {"label":"F2", "x":2.25, "y":0},
+                {"label":"F3", "x":3.25, "y":0},
+                {"label":"F4", "x":4.25, "y":0},
+                {"label":"F5", "x":5.5, "y":0},
+                {"label":"F6", "x":6.5, "y":0},
+                {"label":"F7", "x":7.5, "y":0},
+                {"label":"F8", "x":8.5, "y":0},
+                {"label":"F9", "x":9.75, "y":0},
+                {"label":"F10", "x":10.75, "y":0},
+                {"label":"F11", "x":11.75, "y":0},
+                {"label":"F12", "x":12.75, "y":0},
+                {"label":"Fn", "x":14, "y":0},
+                {"label":"Insert", "x":15.25, "y":0},
+
+                {"label":"`", "x":0, "y":1.25},
+                {"label":"1", "x":1, "y":1.25},
+                {"label":"2", "x":2, "y":1.25},
+                {"label":"3", "x":3, "y":1.25},
+                {"label":"4", "x":4, "y":1.25},
+                {"label":"5", "x":5, "y":1.25},
+                {"label":"6", "x":6, "y":1.25},
+                {"label":"7", "x":7, "y":1.25},
+                {"label":"8", "x":8, "y":1.25},
+                {"label":"9", "x":9, "y":1.25},
+                {"label":"0", "x":10, "y":1.25},
+                {"label":"-", "x":11, "y":1.25},
+                {"label":"=", "x":12, "y":1.25},
+                {"label":"Backspace", "x":13, "y":1.25, "w":2},
+                {"label":"Home", "x":15.25, "y":1.25},
+
+                {"label":"Tab", "x":0, "y":2.25, "w":1.5},
+                {"label":"Q", "x":1.5, "y":2.25},
+                {"label":"W", "x":2.5, "y":2.25},
+                {"label":"E", "x":3.5, "y":2.25},
+                {"label":"R", "x":4.5, "y":2.25},
+                {"label":"T", "x":5.5, "y":2.25},
+                {"label":"Y", "x":6.5, "y":2.25},
+                {"label":"U", "x":7.5, "y":2.25},
+                {"label":"I", "x":8.5, "y":2.25},
+                {"label":"O", "x":9.5, "y":2.25},
+                {"label":"P", "x":10.5, "y":2.25},
+                {"label":"[", "x":11.5, "y":2.25},
+                {"label":"]", "x":12.5, "y":2.25},
+                {"label":"\\", "x":13.5, "y":2.25, "w":1.5},
+                {"label":"Delete", "x":15.25, "y":2.25},
+
+                {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
+                {"label":"A", "x":1.75, "y":3.25},
+                {"label":"S", "x":2.75, "y":3.25},
+                {"label":"D", "x":3.75, "y":3.25},
+                {"label":"F", "x":4.75, "y":3.25},
+                {"label":"G", "x":5.75, "y":3.25},
+                {"label":"H", "x":6.75, "y":3.25},
+                {"label":"J", "x":7.75, "y":3.25},
+                {"label":"K", "x":8.75, "y":3.25},
+                {"label":"L", "x":9.75, "y":3.25},
+                {"label":";", "x":10.75, "y":3.25},
+                {"label":"'", "x":11.75, "y":3.25},
+                {"label":"Enter", "x":12.75, "y":3.25, "w":2.25},
+
+                {"label":"Shift", "x":0, "y":4.25, "w":2.25},
+                {"label":"Z", "x":2.25, "y":4.25},
+                {"label":"X", "x":3.25, "y":4.25},
+                {"label":"C", "x":4.25, "y":4.25},
+                {"label":"V", "x":5.25, "y":4.25},
+                {"label":"B", "x":6.25, "y":4.25},
+                {"label":"N", "x":7.25, "y":4.25},
+                {"label":"M", "x":8.25, "y":4.25},
+                {"label":",", "x":9.25, "y":4.25},
+                {"label":".", "x":10.25, "y":4.25},
+                {"label":"/", "x":11.25, "y":4.25},
+                {"label":"Shift", "x":12.25, "y":4.25, "w":1.75},
+                {"label":"\u2191", "x":14.25, "y":4.5},
+
+                {"label":"Ctrl", "x":0, "y":5.25, "w":1.25},
+                {"label":"Win", "x":1.25, "y":5.25, "w":1.25},
+                {"label":"Alt", "x":2.5, "y":5.25, "w":1.25},
+                {"x":3.75, "y":5.25, "w":6.25},
+                {"label":"Alt", "x":10, "y":5.25, "w":1.5},
+                {"label":"Ctrl", "x":11.5, "y":5.25, "w":1.5},
+                {"label":"\u2190", "x":13.25, "y":5.5},
+                {"label":"\u2193", "x":14.25, "y":5.5},
+                {"label":"\u2192", "x":15.25, "y":5.5}
+            ]
        },

        "LAYOUT_iso": {
            "layout": [
-                {"label":"Esc", "x":0, "y":0}, 
-                {"label":"F1", "x":1.25, "y":0}, 
-                {"label":"F2", "x":2.25, "y":0}, 
-                {"label":"F3", "x":3.25, "y":0}, 
-                {"label":"F4", "x":4.25, "y":0}, 
-                {"label":"F5", "x":5.5, "y":0}, 
-                {"label":"F6", "x":6.5, "y":0}, 
-                {"label":"F7", "x":7.5, "y":0}, 
-                {"label":"F8", "x":8.5, "y":0}, 
-                {"label":"F9", "x":9.75, "y":0}, 
-                {"label":"F10", "x":10.75, "y":0}, 
-                {"label":"F11", "x":11.75, "y":0}, 
-                {"label":"F12", "x":12.75, "y":0}, 
-                {"label":"Fn", "x":14, "y":0}, 
-                {"label":"Insert", "x":15.25, "y":0}, 
+                {"label":"Esc", "x":0, "y":0},
+                {"label":"F1", "x":1.25, "y":0},
+                {"label":"F2", "x":2.25, "y":0},
+                {"label":"F3", "x":3.25, "y":0},
+                {"label":"F4", "x":4.25, "y":0},
+                {"label":"F5", "x":5.5, "y":0},
+                {"label":"F6", "x":6.5, "y":0},
+                {"label":"F7", "x":7.5, "y":0},
+                {"label":"F8", "x":8.5, "y":0},
+                {"label":"F9", "x":9.75, "y":0},
+                {"label":"F10", "x":10.75, "y":0},
+                {"label":"F11", "x":11.75, "y":0},
+                {"label":"F12", "x":12.75, "y":0},
+                {"label":"Fn", "x":14, "y":0},
+                {"label":"Insert", "x":15.25, "y":0},

-                {"label":"`", "x":0, "y":1.25}, 
-                {"label":"1", "x":1, "y":1.25}, 
-                {"label":"2", "x":2, "y":1.25}, 
-                {"label":"3", "x":3, "y":1.25}, 
-                {"label":"4", "x":4, "y":1.25}, 
-                {"label":"5", "x":5, "y":1.25}, 
-                {"label":"6", "x":6, "y":1.25}, 
-                {"label":"7", "x":7, "y":1.25}, 
-                {"label":"8", "x":8, "y":1.25}, 
-                {"label":"9", "x":9, "y":1.25}, 
-                {"label":"0", "x":10, "y":1.25}, 
-                {"label":"-", "x":11, "y":1.25}, 
-                {"label":"=", "x":12, "y":1.25}, 
-                {"label":"Backspace", "x":13, "y":1.25, "w":2}, 
-                {"label":"Home", "x":15.25, "y":1.25}, 
+                {"label":"`", "x":0, "y":1.25},
+                {"label":"1", "x":1, "y":1.25},
+                {"label":"2", "x":2, "y":1.25},
+                {"label":"3", "x":3, "y":1.25},
+                {"label":"4", "x":4, "y":1.25},
+                {"label":"5", "x":5, "y":1.25},
+                {"label":"6", "x":6, "y":1.25},
+                {"label":"7", "x":7, "y":1.25},
+                {"label":"8", "x":8, "y":1.25},
+                {"label":"9", "x":9, "y":1.25},
+                {"label":"0", "x":10, "y":1.25},
+                {"label":"-", "x":11, "y":1.25},
+                {"label":"=", "x":12, "y":1.25},
+                {"label":"Backspace", "x":13, "y":1.25, "w":2},
+                {"label":"Home", "x":15.25, "y":1.25},

-                {"label":"Tab", "x":0, "y":2.25, "w":1.5}, 
-                {"label":"Q", "x":1.5, "y":2.25}, 
-                {"label":"W", "x":2.5, "y":2.25}, 
-                {"label":"E", "x":3.5, "y":2.25}, 
-                {"label":"R", "x":4.5, "y":2.25}, 
-                {"label":"T", "x":5.5, "y":2.25}, 
-                {"label":"Y", "x":6.5, "y":2.25}, 
-                {"label":"U", "x":7.5, "y":2.25}, 
-                {"label":"I", "x":8.5, "y":2.25}, 
-                {"label":"O", "x":9.5, "y":2.25}, 
-                {"label":"P", "x":10.5, "y":2.25}, 
-                {"label":"[", "x":11.5, "y":2.25}, 
-                {"label":"]", "x":12.5, "y":2.25}, 
-                {"label":"Delete", "x":15.25, "y":2.25}, 
+                {"label":"Tab", "x":0, "y":2.25, "w":1.5},
+                {"label":"Q", "x":1.5, "y":2.25},
+                {"label":"W", "x":2.5, "y":2.25},
+                {"label":"E", "x":3.5, "y":2.25},
+                {"label":"R", "x":4.5, "y":2.25},
+                {"label":"T", "x":5.5, "y":2.25},
+                {"label":"Y", "x":6.5, "y":2.25},
+                {"label":"U", "x":7.5, "y":2.25},
+                {"label":"I", "x":8.5, "y":2.25},
+                {"label":"O", "x":9.5, "y":2.25},
+                {"label":"P", "x":10.5, "y":2.25},
+                {"label":"[", "x":11.5, "y":2.25},
+                {"label":"]", "x":12.5, "y":2.25},
+                {"label":"Delete", "x":15.25, "y":2.25},

-                {"label":"Caps Lock", "x":0, "y":3, "w":1.75},
+                {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
                {"label":"A", "x":1.75, "y":3.25},
                {"label":"S", "x":2.75, "y":3.25},
                {"label":"D", "x":3.75, "y":3.25},
@@ -72,7 +157,7 @@
                {"label":";", "x":10.75, "y":3.25},
                {"label":"'", "x":11.75, "y":3.25},
                {"label":"ISO #", "x":12.75, "y":3.25},
-                {"label":"Enter", "x":13.5, "y":2.25, "w":1.5, "h":2},
+                {"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2},

                {"label":"Shift", "x":0, "y":4.25, "w":1.25},
                {"label":"ISO \\", "x":1.25, "y":4.25},
@@ -93,13 +178,13 @@
                {"label":"GUI", "x":1.25, "y":5.25, "w":1.25},
                {"label":"Alt", "x":2.5, "y":5.25, "w":1.25},
                {"label":"Space", "x":3.75, "y":5.25, "w":6.25},
-                {"label":"Alt", "x":10, "y":5.25, "w":1.5}, 
-                {"label":"Ctrl", "x":11.5, "y":5.25, "w":1.5}, 
+                {"label":"Alt", "x":10, "y":5.25, "w":1.5},
+                {"label":"Ctrl", "x":11.5, "y":5.25, "w":1.5},

                {"label":"Left", "x":13.25, "y":5.5},
                {"label":"Down", "x":14.25, "y":5.5},
                {"label":"Right", "x":15.25, "y":5.5}
            ]
-          }
+        }
    }
 }
--- a/keyboards/jacky_studio/bear_65/keymaps/stanrc85/keymap.c
+++ b/keyboards/jacky_studio/bear_65/keymaps/stanrc85/keymap.c
@@ -0,0 +1,68 @@
+/* Copyright 2021 Stanrc85
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+#include "stanrc85.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_QWERTY] = LAYOUT_full_bs(
+             KC_ESC,  KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6,           KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,    KC_BSPC,     KC_DEL,
+            KC_PGUP,  KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T,                 KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+        MO(_FN2_60),  KC_CTLE, KC_A, KC_S, KC_D, KC_F, KC_G,                KC_H, KC_J, KC_K, KC_L,  KC_SCLN,   KC_QUOT,   KC_ENT,
+                      KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B,                KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+                      KC_LCTL,    KC_LALT, LT_BPCF, KC_LGUI,                LT_SPCF,    TD_TWIN,                        KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [_DEFAULT] = LAYOUT_full_bs(
+             KC_ESC,  KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6,           KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,    KC_BSPC,     KC_DEL,
+            KC_PGUP,  KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T,                 KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
+           KC_PGDN,   KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G,                KC_H, KC_J, KC_K, KC_L,  KC_SCLN,   KC_QUOT,   KC_ENT,
+                      KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B,                KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+                      KC_LCTL,     KC_LALT, KC_SPC, MO(_FN1_60),            KC_SPC,     MO(_FN2_60),                    KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [_FN1_60] = LAYOUT_full_bs(
+             _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,         KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______,     KC_INS,
+            _______,  _______, _______, _______, _______, _______, KC_VOLU,                KC_PGUP, KC_BSPC, KC_UP,   KC_DEL,  KC_PSCR, _______, _______, _______,
+           _______,   KC_CAPS, _______, _______, KC_LCTL, KC_LSFT, KC_VOLD,                KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT,  _______,   _______,   _______,
+                      _______, KC_RDP, _______, _______, _______, _______,                 _______, _______, _______, _______, _______, _______, _______, _______,
+                      _______,     _______, _______, _______,                              _______,     _______,                        _______, _______, _______
+    ),
+    [_FN2_60] = LAYOUT_full_bs(
+             _______, _______, _______, _______, _______, _______, _______, _______,       _______, _______, _______, _______, _______, _______,  _______,     RGB_TOG,
+            _______,  _______, _______, _______, _______, _______, _______,                _______, _______, _______, _______, _______, _______,  _______, RESET,
+           _______,   _______, _______, _______, _______, _______, _______,                _______, _______, _______, _______,  _______,   _______,   KC_MAKE,
+                      _______, _______, _______, _______, _______, _______,                _______, NK_TOGG, _______, _______, _______, _______, RGB_MOD, RGB_VAI,
+                      TG(_DEFAULT), _______, _______, _______,                             _______,     _______,                        RGB_HUD, RGB_VAD, RGB_HUI
+    )
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    switch (get_highest_layer(state)) {
+    case _FN1_60:
+        break;
+    case _FN2_60:
+        rgb_matrix_mode_noeeprom(RGB_MATRIX_RAINBOW_MOVING_CHEVRON);
+        break;
+    case _DEFAULT:
+        rgb_matrix_mode_noeeprom(RGB_MATRIX_MULTISPLASH);
+        break;
+    case _QWERTY:
+        rgb_matrix_mode_noeeprom(RGB_MATRIX_TYPING_HEATMAP);
+        break;
+    default: //  for any other layers, or the default layer
+        break;
+    }
+    return state;
+}
--- a/keyboards/jacky_studio/bear_65/keymaps/stanrc85/rules.mk
+++ b/keyboards/jacky_studio/bear_65/keymaps/stanrc85/rules.mk
@@ -0,0 +1 @@
+USER_NAME := stanrc85
--- a/keyboards/le_chiffre/le_chiffre.c
+++ b/keyboards/le_chiffre/le_chiffre.c
@@ -15,6 +15,7 @@
 */
 #include "le_chiffre.h"

+#ifdef RGB_MATRIX_ENABLE
 led_config_t g_led_config = { {
  // Key Matrix to LED Index
  { 3, 4, NO_LED, 5, 6 },
@@ -29,3 +30,4 @@ led_config_t g_led_config = { {

  2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2
 } };
+#endif
--- a/keyboards/makrosu/config.h
+++ b/keyboards/makrosu/config.h
@@ -0,0 +1,70 @@
+/* Copyright 2021 Valdydesu_ 
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xAB69
+#define PRODUCT_ID      0x8585
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    valdydesu_
+#define PRODUCT         makrosu
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 6
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B6 }
+#define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5}
+#define UNUSED_PINS
+
+#define ENCODERS_PAD_A { D1 }
+#define ENCODERS_PAD_B { E6 }
+#define ENCODER_DIRECTION_FLIP
+#define TAP_CODE_DELAY 10 
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define BOOTMAGIC_LITE_ROW 0
+#define BOOTMAGIC_LITE_COLUMN 5
+/* number of backlight levels */
+
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 0
+#endif
+
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+
+
+// EEPROM usage
+
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
--- a/keyboards/makrosu/info.json
+++ b/keyboards/makrosu/info.json
@@ -0,0 +1,21 @@
+{
+    "keyboard_name": "MakrOSU",
+    "url": "",
+    "maintainer": "Valdydesu_",
+    "width": 3,
+    "height": 2,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+      
+                {"label" : "Esc", "x":0, "y":0},
+                {"label" : "F1", "x":1, "y":0},
+                {"label" : "F2", "x":2, "y":0},
+                
+                {"label" : "Lower", "x":0, "y":1},
+                {"label" : "Z", "x":1.5, "y":1},
+                {"label" : "X", "x":2.5, "y":1}
+            ]
+        }
+    }
+}
--- a/keyboards/makrosu/keymaps/default/keymap.c
+++ b/keyboards/makrosu/keymaps/default/keymap.c
@@ -0,0 +1,122 @@
+/* Copyright 2021 Valdydesu_
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
+
+#include QMK_KEYBOARD_H
+
+enum planck_layers {
+  _1,
+  _2,
+  _3,
+  _4
+
+};
+
+
+enum planck_keycodes {
+  L1 = SAFE_RANGE,
+  L2,
+  L3
+
+};
+
+#define LOWER MO(_4)
+#define IND_1          D4
+#define IND_2          C6
+#define IND_3          D7
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_1] = LAYOUT(
+        KC_ESC, KC_F1, KC_F2,
+        LOWER, KC_Z, KC_X),
+
+    [_2] = LAYOUT(
+        LALT(KC_TAB), LGUI(KC_TAB), LCTL(KC_S),
+        LOWER, LCTL(KC_C), LCTL(KC_V)),
+
+    [_3] = LAYOUT(
+        KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS),
+
+    [_4] = LAYOUT(
+        L1, L2, L3,
+        _______, _______, _______),
+
+};
+
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    state = update_tri_layer_state(state, _4, X_PAUSE, X_PAUSE);
+    writePin(IND_1, layer_state_cmp(state, 1));
+    writePin(IND_2, layer_state_cmp(state, 2));
+    writePin(IND_3, layer_state_cmp(state, 3));
+    return state;
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case L1:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_1);
+            }
+            return false;
+        case L2:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_2);
+            }
+            return false;
+        case L3:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_3);
+            }
+            return false;
+    }
+    return true;
+}
+
+void matrix_init_user(void) {
+    //init the Pro Micro on-board LEDs
+    setPinOutput(IND_1);
+    setPinOutput(IND_2);
+    setPinOutput(IND_3);
+    //set to off
+    writePinHigh(IND_1);
+    writePinHigh(IND_2);
+    writePinHigh(IND_3);
+}
+
+bool encoder_update_user(uint8_t index, bool clockwise) {
+    if (layer_state_is(_1)) {
+        if (clockwise) {
+            tap_code(KC_UP);
+        } else {
+        tap_code(KC_DOWN);
+        }
+    } else if (layer_state_is(_2)) {
+        if (clockwise) {
+            tap_code(KC_RGHT);
+        } else {
+            tap_code(KC_LEFT);
+        }
+    } else if (layer_state_is(_3)) {
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+    }
+    return true;
+}
--- a/keyboards/makrosu/keymaps/via/keymap.c
+++ b/keyboards/makrosu/keymaps/via/keymap.c
@@ -0,0 +1,122 @@
+/* Copyright 2021 Valdydesu_
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
+
+#include QMK_KEYBOARD_H
+
+enum planck_layers {
+  _1,
+  _2,
+  _3,
+  _4
+
+};
+
+
+enum planck_keycodes {
+  L1 = SAFE_RANGE,
+  L2,
+  L3
+
+};
+
+#define LOWER MO(_4)
+#define IND_1          D4
+#define IND_2          C6
+#define IND_3          D7
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_1] = LAYOUT(
+        KC_ESC, KC_F1, KC_F2,
+        LOWER, KC_Z, KC_X),
+
+    [_2] = LAYOUT(
+        LALT(KC_TAB), LGUI(KC_TAB), LCTL(KC_S),
+        LOWER, LCTL(KC_C), LCTL(KC_V)),
+
+    [_3] = LAYOUT(
+        KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS),
+
+    [_4] = LAYOUT(
+        L1, L2, L3,
+        _______, _______, _______),
+
+};
+
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    state = update_tri_layer_state(state, _4, X_PAUSE, X_PAUSE);
+    writePin(IND_1, layer_state_cmp(state, 1));
+    writePin(IND_2, layer_state_cmp(state, 2));
+    writePin(IND_3, layer_state_cmp(state, 3));
+    return state;
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case L1:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_1);
+            }
+            return false;
+        case L2:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_2);
+            }
+            return false;
+        case L3:
+            if (record->event.pressed) {
+                set_single_persistent_default_layer(_3);
+            }
+            return false;
+    }
+    return true;
+}
+
+void matrix_init_user(void) {
+    //init the Pro Micro on-board LEDs
+    setPinOutput(IND_1);
+    setPinOutput(IND_2);
+    setPinOutput(IND_3);
+    //set to off
+    writePinHigh(IND_1);
+    writePinHigh(IND_2);
+    writePinHigh(IND_3);
+}
+
+bool encoder_update_user(uint8_t index, bool clockwise) {
+    if (layer_state_is(_1)) {
+        if (clockwise) {
+            tap_code(KC_UP);
+        } else {
+        tap_code(KC_DOWN);
+        }
+    } else if (layer_state_is(_2)) {
+        if (clockwise) {
+            tap_code(KC_RGHT);
+        } else {
+            tap_code(KC_LEFT);
+        }
+    } else if (layer_state_is(_3)) {
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+    }
+    return true;
+}
--- a/keyboards/makrosu/keymaps/via/rules.mk
+++ b/keyboards/makrosu/keymaps/via/rules.mk
@@ -0,0 +1 @@
+VIA_ENABLE = yes
--- a/keyboards/makrosu/makrosu.c
+++ b/keyboards/makrosu/makrosu.c
@@ -0,0 +1,16 @@
+ /* Copyright 2021 Valdydesu_ 
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+#include "makrosu.h"
--- a/keyboards/makrosu/makrosu.h
+++ b/keyboards/makrosu/makrosu.h
@@ -0,0 +1,20 @@
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K02, K03, K04, \
+    K00, K01, K05  \
+) \
+{ \
+    { K00, K01, K02, K03, K04, K05 }, \
+}
+
--- a/keyboards/makrosu/readme.md
+++ b/keyboards/makrosu/readme.md
@@ -0,0 +1,14 @@
+# [Makrosu Keypad](https://www.instagram.com/p/CJ8eoQ7BoGZ/)
+
+A Macropad that has 1 rotary encoder, 2 switches and 3 push buttons. Default function is for playing OSU!
+
+* Keyboard Maintainer: [Valdy](https://github.com/valdiieee)
+* Hardware Supported: Pro Micro, EC11 rotary encoder, MX Style Switches, Push Buttons, 1n4148 diodes
+* Hardware Availability: Private GB
+
+Make example for this keyboard (after setting up your build environment):
+
+    make makrosu:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
--- a/keyboards/makrosu/rules.mk
+++ b/keyboards/makrosu/rules.mk
@@ -0,0 +1,23 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+ENCODER_ENABLE = yes
--- a/keyboards/mechstudio/dawn/info.json
+++ b/keyboards/mechstudio/dawn/info.json
@@ -35,8 +35,7 @@
        {"label":"0", "x":10, "y":1.25},
        {"label":"-", "x":11, "y":1.25},
        {"label":"=", "x":12, "y":1.25},
-        {"label":"\\", "x":13, "y":1.25},
-        {"label":"Backspace", "x":13, "y":1.25},
+        {"label":"Backspace", "x":13, "y":1.25, "w":2},
        {"label":"Page Up", "x":15, "y":1.25},

        {"label":"Tab", "x":0, "y":2.25, "w":1.5},
@@ -54,6 +53,7 @@
        {"label":"]", "x":12.5, "y":2.25},
        {"label":"\\", "x":13.5, "y":2.25, "w":1.5},
        {"label":"Page Down", "x":15, "y":2.25},
+
        {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
        {"label":"A", "x":1.75, "y":3.25},
        {"label":"S", "x":2.75, "y":3.25},
@@ -66,11 +66,12 @@
        {"label":"L", "x":9.75, "y":3.25},
        {"label":";", "x":10.75, "y":3.25},
        {"label":"'", "x":11.75, "y":3.25},
-        {"label":"Enter", "x":12.75, "y":3.25, "w":2.25},
+        {"label":"#", "x":12.75, "y":3.25},
+        {"label":"Enter", "x":13.75, "y":3.25, "w":1.25},
        {"label":"End", "x":15, "y":3.25},

        {"label":"Left Shift", "x":0, "y":4.25, "w":1.25},
-        {"label":"\\", "x":0, "y":4.25},
+        {"label":"\\", "x":1.25, "y":4.25},
        {"label":"Z", "x":2.25, "y":4.25},
        {"label":"X", "x":3.25, "y":4.25},
        {"label":"C", "x":4.25, "y":4.25},
@@ -96,4 +97,4 @@
        {"label":"Right", "x":15, "y":5.25}]
    }
  }
-}
+}
--- a/keyboards/misonoworks/karina/info.json
+++ b/keyboards/misonoworks/karina/info.json
@@ -1,12 +1,56 @@
 {
-    "keyboard_name": "Karina", 
-    "url": "https://github.com/autumnisacutie/karina", 
-    "maintainer": "MisonoWorks", 
-    "width": 11, 
-    "height": 5, 
+    "keyboard_name": "Karina",
+    "url": "https://github.com/autumnisacutie/karina",
+    "maintainer": "MisonoWorks",
+    "width": 11,
+    "height": 5,
    "layouts": {
        "LAYOUT": {
-            "layout": [{"x":0, "y":0}, {"x":10, "y":0}, {"label":"Q", "x":0.5, "y":1}, {"label":"W", "x":1.5, "y":1}, {"label":"E", "x":2.5, "y":1}, {"label":"R", "x":3.5, "y":1}, {"label":"T", "x":4.5, "y":1}, {"label":"Y", "x":5.5, "y":1}, {"label":"U", "x":6.5, "y":1}, {"label":"I", "x":7.5, "y":1}, {"label":"O", "x":8.5, "y":1}, {"label":"P", "x":9.5, "y":1}, {"label":"Tab", "x":0, "y":2}, {"label":"A", "x":1, "y":2}, {"label":"S", "x":2, "y":2}, {"label":"D", "x":3, "y":2}, {"label":"F", "x":4, "y":2}, {"label":"G", "x":5, "y":2}, {"label":"H", "x":6, "y":2}, {"label":"J", "x":7, "y":2}, {"label":"K", "x":8, "y":2}, {"label":"L", "x":9, "y":2}, {"label":"Enter", "x":10, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.5}, {"label":"Z", "x":1.5, "y":3}, {"label":"X", "x":2.5, "y":3}, {"label":"C", "x":3.5, "y":3}, {"label":"V", "x":4.5, "y":3}, {"label":"B", "x":5.5, "y":3}, {"label":"N", "x":6.5, "y":3}, {"label":"M", "x":7.5, "y":3}, {"label":"<", "x":8.5, "y":3}, {"label":"Shift", "x":9.5, "y":3, "w":1.5}, {"label":"Alt", "x":0, "y":4, "w":1.75}, {"x":1.75, "y":4, "w":1.25}, {"x":3, "y":4, "w":2.75}, {"x":5.75, "y":4, "w":2.25}, {"x":8, "y":4, "w":1.25}, {"label":"Control", "x":9.25, "y":4, "w":1.75}]
+            "layout": [
+                {"label":"Encoder 1", "x":0, "y":0},
+                {"label":"Encoder 2", "x":10, "y":0},
+
+                {"label":"Q", "x":0.5, "y":1},
+                {"label":"W", "x":1.5, "y":1},
+                {"label":"E", "x":2.5, "y":1},
+                {"label":"R", "x":3.5, "y":1},
+                {"label":"T", "x":4.5, "y":1},
+                {"label":"Y", "x":5.5, "y":1},
+                {"label":"U", "x":6.5, "y":1},
+                {"label":"I", "x":7.5, "y":1},
+                {"label":"O", "x":8.5, "y":1},
+                {"label":"P", "x":9.5, "y":1},
+
+                {"label":"Tab", "x":0, "y":2},
+                {"label":"A", "x":1, "y":2},
+                {"label":"S", "x":2, "y":2},
+                {"label":"D", "x":3, "y":2},
+                {"label":"F", "x":4, "y":2},
+                {"label":"G", "x":5, "y":2},
+                {"label":"H", "x":6, "y":2},
+                {"label":"J", "x":7, "y":2},
+                {"label":"K", "x":8, "y":2},
+                {"label":"L", "x":9, "y":2},
+                {"label":"Enter", "x":10, "y":2},
+
+                {"label":"Shift", "x":0, "y":3, "w":1.5},
+                {"label":"Z", "x":1.5, "y":3},
+                {"label":"X", "x":2.5, "y":3},
+                {"label":"C", "x":3.5, "y":3},
+                {"label":"V", "x":4.5, "y":3},
+                {"label":"B", "x":5.5, "y":3},
+                {"label":"N", "x":6.5, "y":3},
+                {"label":"M", "x":7.5, "y":3},
+                {"label":"<", "x":8.5, "y":3},
+                {"label":">", "x":9.5, "y":3, "w":1.5},
+
+                {"label":"Alt", "x":0, "y":4, "w":1.75},
+                {"label":"MO(1)", "x":1.75, "y":4, "w":1.25},
+                {"label":"Space", "x":3, "y":4, "w":2.75},
+                {"label":"Backspace", "x":5.75, "y":4, "w":2.25},
+                {"label":"MO(2)", "x":8, "y":4, "w":1.25},
+                {"label":"Control", "x":9.25, "y":4, "w":1.75}
+            ]
        }
    }
 }
--- a/keyboards/misonoworks/karina/karina.h
+++ b/keyboards/misonoworks/karina/karina.h
@@ -20,13 +20,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"

 #define LAYOUT( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010,  \
-	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110,       \
-	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210,            \
-	K300, K301,       K303,             K306,       K308, K309  \
+    K000,                                                       K210, \
+          K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209,       \
+    K300, K301,             K303, K306,                   K308, K309  \
 ) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010 }, \
-	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110 }, \
-	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210 }, \
-	{ K300,  K301,  KC_NO, K303,  KC_NO, KC_NO, K306,  KC_NO, K308,  K309,  KC_NO }  \
+    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010 }, \
+    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110 }, \
+    { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210 }, \
+    { K300,  K301,  KC_NO, K303,  KC_NO, KC_NO, K306,  KC_NO, K308,  K309,  KC_NO }  \
 }
--- a/keyboards/misonoworks/karina/keymaps/default/keymap.c
+++ b/keyboards/misonoworks/karina/keymaps/default/keymap.c
@@ -26,22 +26,28 @@ enum layers {
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

    [DEFAULT] = LAYOUT(
-        KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
-		KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
-		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_MUTE,
-		KC_LALT, MO(SUPER), KC_SPC, KC_BSPC, MO(META), KC_LCTL),
+        KC_ESC,                                                                                      KC_MUTE,
+                 KC_Q,      KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,     KC_P,
+        KC_TAB,  KC_A,      KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,     KC_ENT,
+        KC_LSFT, KC_Z,      KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,
+        KC_LALT, MO(SUPER),                   KC_SPC,  KC_BSPC,                            MO(META), KC_LCTL
+    ),

    [SUPER] = LAYOUT(
-        KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
-		KC_MINUS, KC_EQUAL, KC_GRAVE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, KC_SCLN,
-		KC_LSFT, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLSH, KC_BSLS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_TRNS, KC_TRNS),
+        KC_TRNS,                                                                                  KC_TRNS,
+                 KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
+        KC_MINS, KC_EQL,  KC_GRV,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, KC_SCLN,
+        KC_LSFT, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLSH, KC_BSLS,
+        KC_TRNS, KC_TRNS,                   KC_TRNS, KC_DEL,                             KC_TRNS, KC_TRNS
+    ),

-	[META] = LAYOUT(
-	    KC_NUMLOCK, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
-		KC_F11, KC_F12, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC,
-		KC_LSFT, KC_LEFT, KC_DOWN, KC_RGHT, KC_KP_PLUS, KC_P2, KC_P0, KC_P1, KC_TRNS, KC_TRNS, KC_TRNS,
-		RGB_TOG, RGB_SAI, RGB_HUI, RGB_VAI, KC_TRNS, RGB_MOD)
+    [META] = LAYOUT(
+        KC_NLCK,                                                                                  KC_TRNS,
+                 KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,
+        KC_F11,  KC_F12,  KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC,
+        KC_LSFT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PPLS, KC_P2,   KC_P0,   KC_P1,   KC_TRNS, KC_TRNS,
+        RGB_TOG, RGB_SAI,                   RGB_HUI, RGB_VAI,                            KC_TRNS, RGB_MOD
+    )

 };

--- a/keyboards/misonoworks/karina/keymaps/voltex/keymap.c
+++ b/keyboards/misonoworks/karina/keymaps/voltex/keymap.c
@@ -26,22 +26,28 @@ enum layers {
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

    [DEFAULT] = LAYOUT(
-        KC_TRNS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
-		KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
-		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_TRNS,
-		KC_LALT, MO(SUPER), KC_SPC, KC_BSPC, MO(META), KC_LCTL),
+        KC_TRNS,                                                                                     KC_TRNS,
+                 KC_Q,      KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,     KC_P,
+        KC_TAB,  KC_A,      KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,     KC_ENT,
+        KC_LSFT, KC_Z,      KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,
+        KC_LALT, MO(SUPER),                   KC_SPC,  KC_BSPC,                            MO(META), KC_LCTL
+    ),

    [SUPER] = LAYOUT(
-        KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
-		KC_MINUS, KC_EQUAL, KC_GRAVE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, KC_SCLN,
-		KC_LSFT, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLSH, KC_BSLS, KC_TRNS,
-		KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_TRNS, KC_TRNS),
+        KC_ESC,                                                                                   KC_TRNS,
+                 KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,
+        KC_MINS, KC_EQL,  KC_GRV,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, KC_SCLN,
+        KC_LSFT, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLSH, KC_BSLS,
+        KC_TRNS, KC_TRNS,                   KC_TRNS, KC_DEL,                             KC_TRNS, KC_TRNS
+    ),

-	[META] = LAYOUT(
-	    KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
-		KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC,
-		KC_LSFT, KC_LEFT, KC_DOWN, KC_RGHT, KC_KP_PLUS, KC_KP_2, KC_KP_0, KC_KP_1, KC_TRNS, KC_TRNS, KC_TRNS,
-		RGB_TOG, RGB_SAI, RGB_HUI, RGB_VAI, KC_TRNS, RGB_MOD)
+    [META] = LAYOUT(
+        KC_TRNS,                                                                                  KC_TRNS,
+                 KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,
+        KC_TRNS, KC_TRNS, KC_UP,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC,
+        KC_LSFT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PPLS, KC_P2,   KC_P0,   KC_P1,   KC_TRNS, KC_TRNS,
+        RGB_TOG, RGB_SAI,                   RGB_HUI, RGB_VAI,                            KC_TRNS, RGB_MOD
+    )

 };

--- a/keyboards/misonoworks/karina/readme.md
+++ b/keyboards/misonoworks/karina/readme.md
@@ -4,7 +4,7 @@

 35% keyboard with two rotary encoders and an LED bar.

-* Keyboard Maintainer: [MisonoWorks](https://github.com/autumnisacutie/)
+* Keyboard Maintainer: [MisonoWorks](https://github.com/misonoworks/)
 * Hardware Supported: Karina V1 PCB
 * Hardware Availability: [P3D Store](https://p3dstore.com/)

@@ -12,4 +12,10 @@ Make example for this keyboard (after setting up your build environment):

    make misonoworks/karina:default

+Flashing example for this keyboard:
+
+    make misonoworks/karina:default:flash
+
+To reset the board into bootloader mode, hold Space+B while connecting the USB cable.
+
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- a/keyboards/ploopyco/adns5050.c
+++ b/keyboards/ploopyco/adns5050.c
@@ -142,7 +142,7 @@ uint8_t adns_read_reg(uint8_t reg_addr) {

 void adns_write_reg(uint8_t reg_addr, uint8_t data) {
    adns_cs_select();
-    adns_serial_write(reg_addr);
+    adns_serial_write( 0b10000000 | reg_addr );
    adns_serial_write(data);
    adns_cs_deselect();
 }
--- a/keyboards/ploopyco/trackball/readme.md
+++ b/keyboards/ploopyco/trackball/readme.md
@@ -19,7 +19,7 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to

 ## Revisions

-There are two main revisions for the PloopyCo Tracball, everything up to 1.004, and 1.005.   
+There are two main revisions for the PloopyCo Tracball, everything up to 1.004, and 1.005-1.006.

 In the 1.005 revision, button for was changed from pin B5 to B6, and the debug LED pin was changed from F7 to B5. 

--- a/keyboards/ploopyco/trackball_mini/readme.md
+++ b/keyboards/ploopyco/trackball_mini/readme.md
@@ -12,8 +12,8 @@ It's a DIY, QMK Powered Trackball...Mini!

 Make example for this trackball (after setting up your build environment):

-    make ploopyco/trackball_mini/rev1_001:default:flash
-    make ploopyco/trackball_mini/rev1_001:via:flash
+    make ploopyco/trackball_mini/rev1_002:default:flash
+    make ploopyco/trackball_mini/rev1_002:via:flash
    
 To jump to the bootloader, hold down "Button 4" (immediate right of the ball) 

@@ -51,13 +51,13 @@ This should allow you to more heavily customize the behavior.

 Alternatively, the `process_wheel` and `process_mouse` functions can both be replaced too, to allow for even more functionality.

-Additionally, you can change the DPI/CPI or speed of the trackball by calling `adns_set_cpi` at any time. Additionally, there is a `DPI_CONFIG` macro that will cycle through an array of options for the DPI.  This is set to 375, 750, and 1375, but can be changed.  750 is the default. 
+Additionally, you can change the DPI/CPI or speed of the trackball by calling `adns_set_cpi` at any time. Additionally, there is a `DPI_CONFIG` macro that will cycle through an array of options for the DPI.  This is set to 375, 750, and 1375, but can be changed. 1375 is the default. 

 To configure/set your own array, there are two defines to use, `PLOOPY_DPI_OPTIONS` to set the array, and `PLOOPY_DPI_DEFAULT`. 

 ```c
 #define PLOOPY_DPI_OPTIONS { CPI375, CPI750, CPI1375}
-#define PLOOPY_DPI_DEFAULT 1
+#define PLOOPY_DPI_DEFAULT 2
 ```

 The `PLOOPY_DPI_OPTIONS` array sets the values that you want to be able to cycle through, and the order they are in.  The "default" define lets the firmware know which of these options is the default and should be loaded by default.
@@ -72,4 +72,4 @@ When flashing the bootloader, use the following fuse settings:
 |----------|-------------|
 | Low      | `0x5E`      |
 | High     | `0x99`      |
-| Extended | `0xC3`      |
+| Extended | `0xC3`      |
--- a/keyboards/ploopyco/trackball_mini/rev1_001/config.h
+++ b/keyboards/ploopyco/trackball_mini/rev1_001/config.h
@@ -31,7 +31,7 @@
 */
 #define DIRECT_PINS            \
    {                          \
-        { D4, D2, E6, D7, B6 } \
+        { D4, D2, E6, B6, D7 } \
    }

 // These pins are not broken out, and cannot be used normally.
--- a/keyboards/ploopyco/trackball_mini/rev1_002/config.h
+++ b/keyboards/ploopyco/trackball_mini/rev1_002/config.h
@@ -0,0 +1,40 @@
+/* Copyright 2021 Colin Lam (Ploopy Corporation)
+ * Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ * Copyright 2019 Hiroyuki Okada
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define DIRECT_PINS            \
+    {                          \
+        { D4, D2, E6, B6, D7 } \
+    }
+
+// These pins are not broken out, and cannot be used normally.
+// They are set as output and pulled high, by default
+#define UNUSED_PINS \
+    { B5, C7, D0, D1, D3, D5, D6, F1, F3, F5, F6, F7 }
--- a/keyboards/ploopyco/trackball_mini/rev1_002/readme.md
+++ b/keyboards/ploopyco/trackball_mini/rev1_002/readme.md
@@ -0,0 +1 @@
+See the main readme for more details. This is just here for when future revisions are released.
--- a/keyboards/ploopyco/trackball_mini/rev1_002/rev1_002.h
+++ b/keyboards/ploopyco/trackball_mini/rev1_002/rev1_002.h
@@ -0,0 +1,22 @@
+/* Copyright 2021 Colin Lam (Ploopy Corporation)
+ * Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ * Copyright 2019 Sunjun Kim
+ * Copyright 2019 Hiroyuki Okada
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "trackball_mini.h"
--- a/keyboards/ploopyco/trackball_mini/rev1_002/rules.mk
+++ b/keyboards/ploopyco/trackball_mini/rev1_002/rules.mk
--- a/keyboards/ploopyco/trackball_mini/trackball_mini.c
+++ b/keyboards/ploopyco/trackball_mini/trackball_mini.c
@@ -18,6 +18,8 @@
 */

 #include "trackball_mini.h"
+#include "wait.h"
+#include "debug.h"

 #ifndef OPT_DEBOUNCE
 #    define OPT_DEBOUNCE 5  // (ms) 			Time between scroll events
@@ -35,16 +37,8 @@
 #    define OPT_SCALE 1  // Multiplier for wheel
 #endif

-#ifndef PLOOPY_DPI_OPTIONS
-#    define PLOOPY_DPI_OPTIONS { CPI375, CPI750, CPI1375 }
-#    ifndef PLOOPY_DPI_DEFAULT
-#        define PLOOPY_DPI_DEFAULT 2
-#    endif
-#endif
-
-#ifndef PLOOPY_DPI_DEFAULT
-#    define PLOOPY_DPI_DEFAULT 1
-#endif
+#define PLOOPY_DPI_OPTIONS { CPI375, CPI750, CPI1375 }
+#define PLOOPY_DPI_DEFAULT 2

 // Transformation constants for delta-X and delta-Y
 const static float ADNS_X_TRANSFORM = -1.0;
@@ -173,7 +167,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
 void keyboard_pre_init_kb(void) {
    // debug_enable = true;
    // debug_matrix = true;
-    debug_mouse = true;
+    // debug_mouse = true;
    // debug_encoder = true;

    setPinInput(OPT_ENC1);
@@ -198,6 +192,22 @@ void keyboard_pre_init_kb(void) {
 void pointing_device_init(void) {
    adns_init();
    opt_encoder_init();
+
+    // reboot the adns.
+    // if the adns hasn't initialized yet, this is harmless.
+    adns_write_reg(REG_CHIP_RESET, 0x5a);
+
+    // wait maximum time before adns is ready.
+    // this ensures that the adns is actuall ready after reset.
+    wait_ms(55);
+
+    // read a burst from the adns and then discard it.
+    // gets the adns ready for write commands
+    // (for example, setting the dpi).
+    adns_read_burst();
+
+    // set the DPI.
+    adns_set_cpi(dpi_array[keyboard_config.dpi_config]);
 }

 void pointing_device_task(void) {
@@ -223,9 +233,3 @@ void matrix_init_kb(void) {
    }
    matrix_init_user();
 }
-
-void keyboard_post_init_kb(void) {
-    adns_set_cpi(dpi_array[keyboard_config.dpi_config]);
-
-    keyboard_post_init_user();
-}
--- a/keyboards/ploopyco/trackball_nano/trackball_nano.c
+++ b/keyboards/ploopyco/trackball_nano/trackball_nano.c
@@ -18,6 +18,7 @@
 */

 #include "trackball_nano.h"
+#include "wait.h"

 #ifndef OPT_DEBOUNCE
 #    define OPT_DEBOUNCE 5  // (ms) 			Time between scroll events
@@ -43,7 +44,7 @@
 #endif

 #ifndef PLOOPY_DPI_DEFAULT
-#    define PLOOPY_DPI_DEFAULT 1
+#    define PLOOPY_DPI_DEFAULT 2
 #endif

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { };
@@ -139,7 +140,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
 void keyboard_pre_init_kb(void) {
    // debug_enable = true;
    // debug_matrix = true;
-    debug_mouse = true;
+    // debug_mouse = true;
    // debug_encoder = true;

    setPinInput(OPT_ENC1);
@@ -164,6 +165,22 @@ void keyboard_pre_init_kb(void) {
 void pointing_device_init(void) {
    adns_init();
    opt_encoder_init();
+
+    // reboot the adns.
+    // if the adns hasn't initialized yet, this is harmless.
+    adns_write_reg(REG_CHIP_RESET, 0x5a);
+
+    // wait maximum time before adns is ready.
+    // this ensures that the adns is actuall ready after reset.
+    wait_ms(55);
+
+    // read a burst from the adns and then discard it.
+    // gets the adns ready for write commands
+    // (for example, setting the dpi).
+    adns_read_burst();
+
+    // set the DPI.
+    adns_set_cpi(dpi_array[keyboard_config.dpi_config]);
 }

 void pointing_device_task(void) {
@@ -188,9 +205,3 @@ void matrix_init_kb(void) {
    }
    matrix_init_user();
 }
-
-void keyboard_post_init_kb(void) {
-    adns_set_cpi(dpi_array[keyboard_config.dpi_config]);
-
-    keyboard_post_init_user();
-}
--- a/keyboards/plx/config.h
+++ b/keyboards/plx/config.h
@@ -0,0 +1,39 @@
+/* Copyright 2020 Peac Design and Basekeys
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x04D8
+#define PRODUCT_ID      0xE972
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Peac Design
+#define PRODUCT         PLX
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* key matrix pins */
+
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 }
+#define MATRIX_COL_PINS { D5, D3, D2, D1, D0, D4, D6, D7, B4, B5, B6, C6, C7, F1, F0 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
--- a/keyboards/plx/info.json
+++ b/keyboards/plx/info.json
@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "PLX", 
+    "url": "https://peac.design/", 
+    "maintainer": "2Moons", 
+    "width": 18, 
+    "height": 7.25, 
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Del", "x":16, "y":0}, {"label":"Bksp", "x":17, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Enter", "x":16.75, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.25}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"#", "x":15.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"label":"Shift", "x":15.25, "y":3, "w":1.75}, {"label":"Fn", "x":17, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, {"label":"Caps", "x":0, "y":5.25, "w":1.25}, {"label":"Shift", "x":0, "y":6.25, "w":1.25}, {"x":1.25, "y":6.25}]
+        }
+    }
+}
--- a/keyboards/plx/keymaps/default/keymap.c
+++ b/keyboards/plx/keymaps/default/keymap.c
@@ -0,0 +1,49 @@
+/* Copyright 2020 Swiftrax and Basekeys.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _BASE,
+    _FN,
+    _MEDIA };
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT(
+    KC_ESC,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,  KC_HOME,
+    KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+    KC_CAPS,   KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS,  KC_ENT,
+    KC_LSFT, KC_LSFT,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,  KC_PGUP,
+    KC_LCTL, KC_LGUI,  KC_LALT,                           KC_SPC,                                        KC_RALT, KC_RGUI, KC_RCTL
+  ),
+
+  [_FN] = LAYOUT(
+    KC_GRV,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,     KC_F10, KC_F11,  KC_F12,  _______,  _______, 
+    _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+    _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+    _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+    _______, _______, _______,                             _______,                                     _______, _______, _______
+  ),
+
+  [_MEDIA] = LAYOUT(
+    KC_GRV,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,     KC_F10, KC_F11,  KC_F12,  _______,  _______, 
+    _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+    _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+    _______, _______, _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, 
+    _______, _______, _______,                             _______,                                     _______, _______, _______
+  )
+};
--- a/keyboards/plx/plx.c
+++ b/keyboards/plx/plx.c
@@ -0,0 +1,17 @@
+/* Copyright 2020 Peac Design and Basekeys
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "plx.h"
--- a/keyboards/plx/plx.h
+++ b/keyboards/plx/plx.h
@@ -0,0 +1,43 @@
+/* Copyright 2020 Peac Design and Basekeys
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define XXX KC_NO//readabilty 
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00,  k01,  k02,  k03,  k04,  k05,  k06, k07,  k08,  k09,  k0A,  k0B,  k0C,  k0D,  k0E,  \
+    k10,  k11,  k12,  k13,  k14,  k15,  k16, k17,  k18,  k19,  k1A,  k1B,  k1C,  k1D, \
+    k20,  k21,  k22,  k23,  k24,  k25,  k26, k27,  k28,  k29,  k2A,  k2B,  k2C,  k2D, \
+    k30,  k31,  k32,  k33,  k34,  k35,  k36, k37,  k38,  k39,  k3A,  k3B,  k3C,  k3D, \
+    k40,  k41,  k42,                    k46,                         k4B,  k4C,  k4D   \
+) \
+{ \
+   { k00,  k01,  k02,  k03,  k04,  k05,  k06,  k07, k08, k09, k0A, k0B, k0C, k0D, k0E}, \
+   { k10,  k11,  k12,  k13,  k14,  k15,  k16,  k17, k18, k19, k1A, k1B, k1C, k1D}, \
+   { k20,  k21,  k22,  k23,  k24,  k25,  k26,  k27, k28, k29, k2A, k2B, k2C, k2D}, \
+   { k30,  k31,  k32,  k33,  k34,  k35,  k36,  k37, k38, k39, k3A, k3B, k3C, k3D}, \
+   { k40,  k41,  k42,  XXX,  XXX,  XXX,  k46,  XXX, XXX, XXX, XXX, k4B, k4C, k4D} \
+}
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Albert Y	a913db63aa	Fix zero condition of reactive runners that will suspend RGB animation (#12710 ) * Avoid zero or overflow from user's rgb_matrix_config.speed * Avoid zero tick for reactive splash. * Avoid zero time for animation runner. Co-authored-by: filterpaper <filterpaper@localhost>	2021-06-23 19:45:05 +10:00
Xelus22	ced7e9a0ce	[Keyboard][Bug] Makrosu VIA compile fix encoder and formatting (#13306 ) * fix encoder and formatting * remove redundant breaks * Update keyboards/makrosu/keymaps/default/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/makrosu/keymaps/via/keymap.c Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Drashna Jaelre <drashna@live.com>	2021-06-22 20:30:42 -07:00
xyzz	268d0efa7e	[Docs] pr_checklist: fix capitalization of Vial (#13301 )	2021-06-22 17:45:13 -07:00
Muhammad Rivaldi	4ef2b0f818	adding my custom keypad to qmk repository (#12150 ) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Nick Brassel <nick@tzarc.org>	2021-06-23 09:34:17 +10:00
James Young	0c5c39c18a	Technika: add sample info.json data (#13292 ) Adds a placeholder file with sample data, as the layout hasn't been published yet.	2021-06-23 09:32:37 +10:00
Albert Y	92dd1b977b	Additional documentation for GUI mod combo (#13266 ) Co-authored-by: filterpaper <filterpaper@localhost>	2021-06-22 12:41:57 +10:00
4pplet	d7f352de98	Adding "Eagle Viper Rep", open sourced Eagle/Viper V2/V3 PCB (#13020 ) * adding revision A * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.h Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update readme.md Adding instruction on how to enter bootloader * adding instruction on how to enter bootloader (DFU) adding instruction on how to enter bootloader (DFU) * updated description * Update keyboards/4pplet/eagle_viper_rep/rev_a/halconf.h Co-authored-by: Nick Brassel <nick@tzarc.org> * Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c Co-authored-by: Nick Brassel <nick@tzarc.org> * Update keyboards/4pplet/eagle_viper_rep/rev_a/config.h Co-authored-by: Nick Brassel <nick@tzarc.org> * Update keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h Co-authored-by: Nick Brassel <nick@tzarc.org> * Update keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h Co-authored-by: Nick Brassel <nick@tzarc.org> * Update keyboards/4pplet/eagle_viper_rep/keymaps/default/keymap.c Co-authored-by: Nick Brassel <nick@tzarc.org> * Restoring palSetLineMode for working underglow I was experiencing the same issue as this: https://github.com/qmk/qmk_firmware/issues/12655#issuecomment-844104659 sigprof helped me resolve this issue. * Update rev_a.c removing palSetLineMode again, works great after rebase. Thanks! Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Nick Brassel <nick@tzarc.org>	2021-06-22 08:09:16 +10:00
James Young	19990a21a9	Geminate60 Codebase Touch-up (#13275 ) * grid-align keycodes in keymaps * rename LAYOUT to LAYOUT_all * update LAYOUT_all macro - use 3-character K<row><column> notation - fix malformed electrical mapping * update info.json - correct maintainer - update label fields - remove meta key * update readme - update board description - update keyboard maintainer	2021-06-21 13:47:47 -07:00
James Young	3f292ec723	Swiftrax Nodu handwired: Layout Macro rename and Community Layout support (#13276 ) * rename LAYOUT to LAYOUT_60_ansi_split_bs_rshift * enable Community Layout support	2021-06-21 13:32:51 -07:00
ploopyco	eba3d68394	Fixes for Ploopy devices (#13144 ) Co-authored-by: Drashna Jael're <drashna@live.com>	2021-06-21 20:59:56 +01:00
James Young	224dcac08f	ID80: fix LAYOUT_iso data (#13274 )	2021-06-21 09:25:02 -07:00
James Young	36f3dba195	mech.studio Dawn: correct key sizes and positioning (#13277 )	2021-06-21 09:23:04 -07:00
Nathan	c0dd142d9f	[Keyboard] le_chiffre.c conditional led_config (#13285 ) disabling RGB_MATRIX_ENABLE causes led_config to fail during compile. Setting this conditional allows you to turn off RGB	2021-06-21 09:04:18 -07:00
Ryan	59c572eaf0	Cleanup junk characters, part 1 (#13282 )	2021-06-21 11:29:15 +01:00
shela	8db1be6420	[Docs] Update Japanese getting started documents. (#12806 ) * Update Japanese getting started documents. * Update faq_build.md * fix typo	2021-06-21 03:36:51 +09:00
Ryan	90e57b7b0a	OLED font easter egg (#13269 )	2021-06-20 09:38:21 -07:00
Erovia	29df3ce83b	Fix/keyboard/dz65rgbv3 (#13268 ) With the 'lufa-ms' bootloader LTO is needed so the keyboard can be built with Configurator.	2021-06-20 16:30:23 +01:00
Sergey Vlasov	7ab4902543	Update Python dependencies for Nix (#12855 ) Co-authored-by: Steve Purcell <steve@sanityinc.com>	2021-06-20 14:30:16 +01:00
James Young	50a312b635	rect44: add LAYOUT_all data (#13260 )	2021-06-20 09:00:10 +01:00
stanrc85	873658a76d	Adding my Bear65 keymap (#12962 )	2021-06-20 08:49:49 +01:00
Xelus22	745f5f6532	[Keyboard] Add Constellation Rev2 (#13103 )	2021-06-20 08:36:54 +01:00
Xelus22	eb2886369d	[Bug] Pachi keymap compile fix (#13261 )	2021-06-20 00:16:50 -07:00
Xelus22	438eee96e8	[Bug] Pachi RGB: fix RGB modifiers (#13262 )	2021-06-20 00:14:44 -07:00
James Young	0624698d33	MisonoWorks Karina Layout Macro Rework (#13259 )	2021-06-20 00:13:34 -07:00
Drashna Jaelre	88e53ad9ca	Fix issue with crkbd json mapping (#13255 )	2021-06-19 20:08:37 -07:00
peepeetee	dc39d90270	[Keyboard] Add LED matrix and 2 layouts to hub20 (#12505 ) Co-authored-by: Drashna Jaelre <drashna@live.com>	2021-06-19 19:21:24 -07:00
nopjmp	050457818c	[Keymap] Fix Preonic rev3 default keymap (#12698 ) The rev3 boards use RGBLIGHT_ENABLE now instead of BACKLIGHT_ENABLE. This resolves the issue of flashing and losing functionality with the default keymap.	2021-06-19 19:20:50 -07:00
alittlepeace	1f4e20cfda	[Keyboard] YMDK Wings: enable Backlight (#12714 )	2021-06-19 19:18:40 -07:00
Nick Abe	c835d2e71d	[Keyboard] Add PLX Keyboard (#12954 ) Co-authored-by: Ryan <fauxpark@gmail.com>	2021-06-19 19:14:40 -07:00
				`@@ -0,0 +1 @@`
				`See the main readme for more details. This is just here for when future revisions are released.`