Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955)

* Remove unnecessary IS_COMMAND definition in clueboard/66/rev4

* Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions

* Update docs to use get_mods() instead of keyboard_report->mods

* Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test

For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist

* Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt)

docs/config_options.md

@@ -87,7 +87,7 @@ This is a C header file that is one of the first things included, and will persi
   * mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 * `#define LOCKING_RESYNC_ENABLE`
   * tries to keep switch state consistent with keyboard LED state
-* `#define IS_COMMAND() ( keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) )`
+* `#define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))`
   * key combination that allows the use of magic commands (useful for debugging)
 * `#define USB_MAX_POWER_CONSUMPTION`
   * sets the maximum power (in mA) over USB for the device (default: 500)

docs/feature_advanced_keycodes.md

@@ -60,21 +60,21 @@ Sometimes, you might want to switch between layers in a macro or as part of a ta
 
 These allow you to combine a modifier with a keycode. When pressed, the keydown event for the modifier, then `kc` will be sent. On release, the keyup event for `kc`, then the modifier will be sent.
 
-|Key       |Aliases               |Description                                         |
-|----------|----------------------|----------------------------------------------------|
-|`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
-|`LSFT(kc)`|`S(kc)`               |Hold Left Shift and press `kc`                      |
-|`LALT(kc)`|                      |Hold Left Alt and press `kc`                        |
-|`LGUI(kc)`|`LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
-|`RCTL(kc)`|                      |Hold Right Control and press `kc`                   |
-|`RSFT(kc)`|                      |Hold Right Shift and press `kc`                     |
-|`RALT(kc)`|`ALGR(kc)`            |Hold Right Alt and press `kc`                       |
-|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`|Hold Right GUI and press `kc`                       |
-|`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
-|`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
-|`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
-|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
-|`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
+|Key       |Aliases                        |Description                                         |
+|----------|-------------------------------|----------------------------------------------------|
+|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                    |
+|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                      |
+|`LALT(kc)`|`A(kc)`                        |Hold Left Alt and press `kc`                        |
+|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
+|`RCTL(kc)`|                               |Hold Right Control and press `kc`                   |
+|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                     |
+|`RALT(kc)`|`ALGR(kc)`                     |Hold Right Alt and press `kc`                       |
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                       |
+|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`              |
+|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`            |
+|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`       |
+|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`     |
+|`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`|
 
 You can also chain them, for example `LCTL(LALT(KC_DEL))` makes a key that sends Control+Alt+Delete with a single keypress.
 
@@ -110,20 +110,20 @@ For convenience, QMK includes some Mod-Tap shortcuts to make common combinations
 |Key         |Aliases                                                          |Description                                            |
 |------------|-----------------------------------------------------------------|-------------------------------------------------------|
 |`LCTL_T(kc)`|`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped               |
-|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
 |`LSFT_T(kc)`|`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                 |
-|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
 |`LALT_T(kc)`|`ALT_T(kc)`                                                      |Left Alt when held, `kc` when tapped                   |
-|`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
 |`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                   |
+|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
+|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
+|`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
 |`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                  |
-|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
-|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
-|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
-|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
-|`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 |`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped         |
 |`LCA_T(kc)` |                                                                 |Left Control and Alt when held, `kc` when tapped       |
+|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
+|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
+|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
+|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
+|`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 
 ## Caveats
 

docs/feature_command.md

@@ -16,35 +16,35 @@ To use Command, hold down the key combination defined by the `IS_COMMAND()` macr
 
 If you would like to change the key assignments for Command, `#define` these in your `config.h` at either the keyboard or keymap level. All keycode assignments here must omit the `KC_` prefix.
 
-|Define                              |Default                                                                               |Description                                     |
-|------------------------------------|--------------------------------------------------------------------------------------|------------------------------------------------|
-|`IS_COMMAND()`                      |<code>(keyboard_report->mods == (MOD_BIT(KC_LSHIFT) &#124; MOD_BIT(KC_RSHIFT)))</code>|The key combination to activate Command         |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true`                                                                                |Set default layer with the Function row         |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true`                                                                                |Set default layer with the number keys          |
-|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false`                                                                               |Set default layer with `MAGIC_KEY_LAYER0..9`    |
-|`MAGIC_KEY_DEBUG`                   |`D`                                                                                   |Toggle debugging over serial                    |
-|`MAGIC_KEY_DEBUG_MATRIX`            |`X`                                                                                   |Toggle key matrix debugging                     |
-|`MAGIC_KEY_DEBUG_KBD`               |`K`                                                                                   |Toggle keyboard debugging                       |
-|`MAGIC_KEY_DEBUG_MOUSE`             |`M`                                                                                   |Toggle mouse debugging                          |
-|`MAGIC_KEY_CONSOLE`                 |`C`                                                                                   |Enable the Command console                      |
-|`MAGIC_KEY_VERSION`                 |`V`                                                                                   |Print the running QMK version to the console    |
-|`MAGIC_KEY_STATUS`                  |`S`                                                                                   |Print the current keyboard status to the console|
-|`MAGIC_KEY_HELP1`                   |`H`                                                                                   |Print Command help to the console               |
-|`MAGIC_KEY_HELP2`                   |`SLASH`                                                                               |Print Command help to the console (alternate)   |
-|`MAGIC_KEY_LAYER0`                  |`0`                                                                                   |Make layer 0 the default layer                  |
-|`MAGIC_KEY_LAYER1`                  |`1`                                                                                   |Make layer 1 the default layer                  |
-|`MAGIC_KEY_LAYER2`                  |`2`                                                                                   |Make layer 2 the default layer                  |
-|`MAGIC_KEY_LAYER3`                  |`3`                                                                                   |Make layer 3 the default layer                  |
-|`MAGIC_KEY_LAYER4`                  |`4`                                                                                   |Make layer 4 the default layer                  |
-|`MAGIC_KEY_LAYER5`                  |`5`                                                                                   |Make layer 5 the default layer                  |
-|`MAGIC_KEY_LAYER6`                  |`6`                                                                                   |Make layer 6 the default layer                  |
-|`MAGIC_KEY_LAYER7`                  |`7`                                                                                   |Make layer 7 the default layer                  |
-|`MAGIC_KEY_LAYER8`                  |`8`                                                                                   |Make layer 8 the default layer                  |
-|`MAGIC_KEY_LAYER9`                  |`9`                                                                                   |Make layer 9 the default layer                  |
-|`MAGIC_KEY_LAYER0_ALT1`             |`ESC`                                                                                 |Make layer 0 the default layer (alternate)      |
-|`MAGIC_KEY_LAYER0_ALT2`             |`GRAVE`                                                                               |Make layer 0 the default layer (alternate)      |
-|`MAGIC_KEY_BOOTLOADER`              |`PAUSE`                                                                               |Enter the bootloader                            |
-|`MAGIC_KEY_LOCK`                    |`CAPS`                                                                                |Lock the keyboard so nothing can be typed       |
-|`MAGIC_KEY_EEPROM`                  |`E`                                                                                   |Clear the EEPROM                                |
-|`MAGIC_KEY_NKRO`                    |`N`                                                                                   |Toggle N-Key Rollover (NKRO)                    |
-|`MAGIC_KEY_SLEEP_LED`               |`Z`                                                                                   |Toggle LED when computer is sleeping            |
+|Define                              |Default                                                                    |Description                                     |
+|------------------------------------|---------------------------------------------------------------------------|------------------------------------------------|
+|`IS_COMMAND()`                      |<code>(get_mods() == (MOD_BIT(KC_LSHIFT) &#124; MOD_BIT(KC_RSHIFT)))</code>|The key combination to activate Command         |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS` |`true`                                                                     |Set default layer with the Function row         |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS` |`true`                                                                     |Set default layer with the number keys          |
+|`MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM`|`false`                                                                    |Set default layer with `MAGIC_KEY_LAYER0..9`    |
+|`MAGIC_KEY_DEBUG`                   |`D`                                                                        |Toggle debugging over serial                    |
+|`MAGIC_KEY_DEBUG_MATRIX`            |`X`                                                                        |Toggle key matrix debugging                     |
+|`MAGIC_KEY_DEBUG_KBD`               |`K`                                                                        |Toggle keyboard debugging                       |
+|`MAGIC_KEY_DEBUG_MOUSE`             |`M`                                                                        |Toggle mouse debugging                          |
+|`MAGIC_KEY_CONSOLE`                 |`C`                                                                        |Enable the Command console                      |
+|`MAGIC_KEY_VERSION`                 |`V`                                                                        |Print the running QMK version to the console    |
+|`MAGIC_KEY_STATUS`                  |`S`                                                                        |Print the current keyboard status to the console|
+|`MAGIC_KEY_HELP1`                   |`H`                                                                        |Print Command help to the console               |
+|`MAGIC_KEY_HELP2`                   |`SLASH`                                                                    |Print Command help to the console (alternate)   |
+|`MAGIC_KEY_LAYER0`                  |`0`                                                                        |Make layer 0 the default layer                  |
+|`MAGIC_KEY_LAYER1`                  |`1`                                                                        |Make layer 1 the default layer                  |
+|`MAGIC_KEY_LAYER2`                  |`2`                                                                        |Make layer 2 the default layer                  |
+|`MAGIC_KEY_LAYER3`                  |`3`                                                                        |Make layer 3 the default layer                  |
+|`MAGIC_KEY_LAYER4`                  |`4`                                                                        |Make layer 4 the default layer                  |
+|`MAGIC_KEY_LAYER5`                  |`5`                                                                        |Make layer 5 the default layer                  |
+|`MAGIC_KEY_LAYER6`                  |`6`                                                                        |Make layer 6 the default layer                  |
+|`MAGIC_KEY_LAYER7`                  |`7`                                                                        |Make layer 7 the default layer                  |
+|`MAGIC_KEY_LAYER8`                  |`8`                                                                        |Make layer 8 the default layer                  |
+|`MAGIC_KEY_LAYER9`                  |`9`                                                                        |Make layer 9 the default layer                  |
+|`MAGIC_KEY_LAYER0_ALT1`             |`ESC`                                                                      |Make layer 0 the default layer (alternate)      |
+|`MAGIC_KEY_LAYER0_ALT2`             |`GRAVE`                                                                    |Make layer 0 the default layer (alternate)      |
+|`MAGIC_KEY_BOOTLOADER`              |`PAUSE`                                                                    |Enter the bootloader                            |
+|`MAGIC_KEY_LOCK`                    |`CAPS`                                                                     |Lock the keyboard so nothing can be typed       |
+|`MAGIC_KEY_EEPROM`                  |`E`                                                                        |Clear the EEPROM                                |
+|`MAGIC_KEY_NKRO`                    |`N`                                                                        |Toggle N-Key Rollover (NKRO)                    |
+|`MAGIC_KEY_SLEEP_LED`               |`Z`                                                                        |Toggle LED when computer is sleeping            |

docs/isp_flashing_guide.md

@@ -53,7 +53,7 @@ This is pretty straight-forward - we'll be connecting like-things to like-things
 The only difference between the .hex files below is which pin is connected to RESET. You can use them on other boards as well, as long as you're aware of the pins being used. If for some reason neither of these pins are available, [create an issue](https://github.com/qmk/qmk_firmware/issues/new), and we can generate one for you!
 
 * Teensy 2.0: [`util/teensy_2.0_ISP_B0.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/teensy_2.0_ISP_B0.hex) (`B0`)
-* Pro Micro: [`util/pro_micro_ISP_B6_10.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/pro_mico_ISP_B6_10.hex) (`B6/10`)
+* Pro Micro: [`util/pro_micro_ISP_B6_10.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/pro_micro_ISP_B6_10.hex) (`B6/10`)
 
 **Flash your Teenys/Pro Micro with one of these and continue - you won't need the file after flashing your ISP device.**
 

docs/keycodes.md

@@ -290,7 +290,7 @@ This is a reference only. Each group of keys links to the page documenting their
 |`DF(layer)`     |Set the base (default) layer                                                      |
 |`MO(layer)`     |Momentarily turn on `layer` when pressed (requires `KC_TRNS` on destination layer)|
 |`OSL(layer)`    |Momentarily activates `layer` until a key is pressed. See [One Shot Keys](https://docs.qmk.fm/#/feature_advanced_keycodes?id=one-shot-keys) for details. |
-|`LM(layer, mod)`|Momentarily turn on `layer` (like MO) with `mod` active as well. 
+|`LM(layer, mod)`|Momentarily turn on `layer` (like MO) with `mod` active as well.  Where `mod` is a mods_bit.  Mods can be viewed [here](https://docs.qmk.fm/#/feature_advanced_keycodes?id=mod-tap).  Example Implementation: `LM(LAYER_1, MOD_LALT)`|
 |`LT(layer, kc)` |Turn on `layer` when held, `kc` when tapped                                       |
 |`TG(layer)`     |Toggle `layer` on or off                                                          |
 |`TO(layer)`     |Turn on `layer` when pressed                                                      |
@@ -319,43 +319,43 @@ This is a reference only. Each group of keys links to the page documenting their
 
 ## [Modifiers](feature_advanced_keycodes.md#modifier-keys)
 
-|Key       |Aliases               |Description                                         |
-|----------|----------------------|----------------------------------------------------|
-|`KC_HYPR` |                      |Hold Left Control, Shift, Alt and GUI               |
-|`KC_MEH`  |                      |Hold Left Control, Shift and Alt                    |
-|`LCTL(kc)`|                      |Hold Left Control and press `kc`                    |
-|`LSFT(kc)`|`S(kc)`               |Hold Left Shift and press `kc`                      |
-|`LALT(kc)`|                      |Hold Left Alt and press `kc`                        |
-|`LGUI(kc)`|`LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
-|`RCTL(kc)`|                      |Hold Right Control and press `kc`                   |
-|`RSFT(kc)`|                      |Hold Right Shift and press `kc`                     |
-|`RALT(kc)`|`ALGR(kc)`            |Hold Right Alt and press `kc`                       |
-|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`|Hold Right GUI and press `kc`                       |
-|`HYPR(kc)`|                      |Hold Left Control, Shift, Alt and GUI and press `kc`|
-|`MEH(kc)` |                      |Hold Left Control, Shift and Alt and press `kc`     |
-|`LCAG(kc)`|                      |Hold Left Control, Alt and GUI and press `kc`       |
-|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`|Hold Left Shift and GUI and press `kc`              |
-|`LCA(kc)` |                      |Hold Left Control and Alt and press `kc`            |
+|Key       |Aliases                        |Description                                         |
+|----------|-------------------------------|----------------------------------------------------|
+|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                    |
+|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                      |
+|`LALT(kc)`|`A(kc)`                        |Hold Left Alt and press `kc`                        |
+|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
+|`RCTL(kc)`|                               |Hold Right Control and press `kc`                   |
+|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                     |
+|`RALT(kc)`|`ALGR(kc)`                     |Hold Right Alt and press `kc`                       |
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                       |
+|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`              |
+|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`            |
+|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`       |
+|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`     |
+|`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`|
+|`KC_MEH`  |                               |Left Control, Shift and Alt                         |
+|`KC_HYPR` |                               |Left Control, Shift, Alt and GUI                    |
 
 ## [Mod-Tap Keys](feature_advanced_keycodes.md#mod-tap)
 
 |Key         |Aliases                                                          |Description                                            |
 |------------|-----------------------------------------------------------------|-------------------------------------------------------|
 |`LCTL_T(kc)`|`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped               |
-|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
 |`LSFT_T(kc)`|`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                 |
-|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
 |`LALT_T(kc)`|`ALT_T(kc)`                                                      |Left Alt when held, `kc` when tapped                   |
-|`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
 |`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                   |
+|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
+|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
+|`RALT_T(kc)`|`ALGR_T(kc)`                                                     |Right Alt when held, `kc` when tapped                  |
 |`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                  |
-|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
-|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
-|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
-|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
-|`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 |`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped         |
 |`LCA_T(kc)` |                                                                 |Left Control and Alt when held, `kc` when tapped       |
+|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
+|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
+|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
+|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
+|`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 
 ## [RGB Lighting](feature_rgblight.md)
 

keyboards/1upkeyboards/1up60hse/config.h

@@ -112,11 +112,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -221,4 +216,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
-

keyboards/1upkeyboards/1up60rgb/config.h

@@ -38,11 +38,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS

keyboards/1upkeyboards/sweet16/config.h

@@ -38,11 +38,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #define RGB_DI_PIN B1
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS

keyboards/30wer/config.h

@@ -22,10 +22,5 @@
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* prevent stuck modifiers */
 #define PREVENT_STUCK_MODIFIERS

keyboards/40percentclub/25/config.h

@@ -121,11 +121,6 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/40percentclub/4x4/config.h

@@ -30,7 +30,6 @@
 #define MATRIX_COL_PINS { C6, D7, E6, B4, B5, B6, B7, D6, F7, F6, F5, F4, F1, F0, B3, B1 }
 #define UNUSED_PINS
 
-
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 
@@ -38,7 +37,6 @@
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
@@ -90,11 +88,6 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -199,4 +192,3 @@
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
-

keyboards/40percentclub/5x5/config.h

@@ -97,11 +97,6 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/40percentclub/6lit/config.h

@@ -122,11 +122,6 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/40percentclub/foobar/config.h

@@ -122,11 +122,6 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/40percentclub/gherkin/config.h

@@ -37,11 +37,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 0

keyboards/40percentclub/i75/config.h

@@ -77,11 +77,6 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/40percentclub/luddite/config.h

@@ -34,11 +34,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* ws2812 RGB LED */
 #define RGB_DI_PIN B4
 #define RGBLIGHT_ANIMATIONS

keyboards/40percentclub/mf68/config.h

@@ -52,7 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
@@ -99,11 +98,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/40percentclub/mf68_ble/config.h

@@ -99,11 +99,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/40percentclub/nori/config.h

@@ -110,11 +110,6 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/40percentclub/tomato/config.h

@@ -28,11 +28,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* eliminate lag on space cadet mods */
 #define PERMISSIVE_HOLD
 

keyboards/40percentclub/ut47/config.h

@@ -53,11 +53,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* Enable GNAP matrix serial output */
 #define GNAP_ENABLE
 

keyboards/412_64/config.h

@@ -30,7 +30,6 @@
 #define MATRIX_COL_PINS { B0, D2, D0, D1, D4, C6, D7, E6 }
 #define UNUSED_PINS { B4, B5, B6, B7, C7, F0, F1 }
 
-
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 
@@ -38,7 +37,6 @@
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
@@ -90,11 +88,6 @@
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -199,4 +192,3 @@
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
-

keyboards/acr60/config.h

@@ -36,11 +36,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #define RGB_DI_PIN E2
 #define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 20

keyboards/al1/config.h

@@ -50,7 +50,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
@@ -102,11 +101,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/alf/dc60/config.h

@@ -112,11 +112,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -221,4 +216,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
-

keyboards/alf/x2/config.h

@@ -38,11 +38,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS

keyboards/alice/config.h

@@ -37,6 +37,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define NO_UART 1
 #define BOOTLOADHID_BOOTLOADER 1
-
-/* key combination for command */
-#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

keyboards/alice/info.json

@@ -0,0 +1,12 @@
+{
+  "keyboard_name": "TGR Alice",
+  "url": "",
+  "maintainer": "Felipe Coury",
+  "width": 17.75,
+  "height": 5,
+  "layouts": {
+    "LAYOUT": {
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.25, "y":0}, {"label":"!", "x":2.25, "y":0}, {"label":"@", "x":3.25, "y":0}, {"label":"#", "x":4.25, "y":0}, {"label":"$", "x":5.25, "y":0}, {"label":"%", "x":6.25, "y":0}, {"label":"^", "x":7.25, "y":0}, {"label":"&", "x":9.75, "y":0}, {"label":"*", "x":10.75, "y":0}, {"label":"(", "x":11.75, "y":0}, {"label":")", "x":12.75, "y":0}, {"label":"_", "x":13.75, "y":0}, {"label":"+", "x":14.75, "y":0}, {"label":"|", "x":15.75, "y":0}, {"label":"~", "x":16.75, "y":0}, {"label":"Insert", "x":0, "y":1}, {"label":"Tab", "x":1.25, "y":1, "w":1.5}, {"label":"Q", "x":2.75, "y":1}, {"label":"W", "x":3.75, "y":1}, {"label":"E", "x":4.75, "y":1}, {"label":"R", "x":5.75, "y":1}, {"label":"T", "x":6.75, "y":1}, {"label":"Y", "x":9.25, "y":1}, {"label":"U", "x":10.25, "y":1}, {"label":"I", "x":11.25, "y":1}, {"label":"O", "x":12.25, "y":1}, {"label":"P", "x":13.25, "y":1}, {"label":"{", "x":14.25, "y":1}, {"label":"}", "x":15.25, "y":1}, {"label":"Backspace", "x":16.25, "y":1, "w":1.5}, {"label":"Delete", "x":0, "y":2}, {"label":"Caps Lock", "x":1.25, "y":2, "w":1.75}, {"label":"A", "x":3, "y":2}, {"label":"S", "x":4, "y":2}, {"label":"D", "x":5, "y":2}, {"label":"F", "x":6, "y":2}, {"label":"G", "x":7, "y":2}, {"label":"H", "x":9.5, "y":2}, {"label":"J", "x":10.5, "y":2}, {"label":"K", "x":11.5, "y":2}, {"label":"L", "x":12.5, "y":2}, {"label":":", "x":13.5, "y":2}, {"label":"\"", "x":14.5, "y":2}, {"label":"Enter", "x":15.5, "y":2, "w":2.25}, {"label":"Shift", "x":1.25, "y":3, "w":2.25}, {"label":"Z", "x":3.5, "y":3}, {"label":"X", "x":4.5, "y":3}, {"label":"C", "x":5.5, "y":3}, {"label":"V", "x":6.5, "y":3}, {"label":"B", "x":9, "y":3}, {"label":"N", "x":10, "y":3}, {"label":"M", "x":11, "y":3}, {"label":"<", "x":12, "y":3}, {"label":">", "x":13, "y":3}, {"label":"?", "x":14, "y":3}, {"label":"Shift", "x":15, "y":3, "w":1.75}, {"label":"Fn", "x":16.75, "y":3}, {"label":"Ctrl", "x":1.25, "y":4, "w":1.5}, {"label":"Alt", "x":3.5, "y":4, "w":1.5}, {"x":5, "y":4, "w":2.25}, {"label":"Win", "x":7.25, "y":4, "w":1.25}, {"x":9, "y":4, "w":2.75}, {"label":"Alt", "x":11.75, "y":4, "w":1.5}, {"label":"Ctrl", "x":16.25, "y":4, "w":1.5}]
+    }
+  }
+}

keyboards/alpha/config.h

@@ -38,12 +38,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-
 #define RGB_DI_PIN F4
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS

keyboards/alps64/config.h

@@ -47,13 +47,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/alu84/config.h

@@ -54,11 +54,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
 #define RGBLED_NUM 16

keyboards/alu84/keymaps/default/keymap.c

@@ -1,5 +1,4 @@
 #include QMK_KEYBOARD_H
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
 
 #define _BL 0
 #define _FN1 1
@@ -108,37 +107,3 @@ void led_set_user(uint8_t usb_led) {
 	}
 
 }
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}

keyboards/amj40/config.h

@@ -54,11 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 4

keyboards/amj60/config.h

@@ -54,11 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 4

keyboards/amj96/config.h

@@ -114,11 +114,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/amjpad/config.h

@@ -54,11 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 4

keyboards/amjpad/keymaps/default/keymap.c

@@ -4,9 +4,6 @@
 #include "rgblight.h"
 #endif
 
-// Used for SHIFT_ESC
-#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
 // Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -66,37 +63,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
       KC_P0, LT(_FL,KC_PDOT),  KC_PENT \
   ),
 };
-
-enum function_id {
-    SHIFT_ESC,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
-  [0]  = ACTION_FUNCTION(SHIFT_ESC),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  static uint8_t shift_esc_shift_mask;
-  switch (id) {
-    case SHIFT_ESC:
-      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
-      if (record->event.pressed) {
-        if (shift_esc_shift_mask) {
-          add_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          add_key(KC_ESC);
-          send_keyboard_report();
-        }
-      } else {
-        if (shift_esc_shift_mask) {
-          del_key(KC_GRV);
-          send_keyboard_report();
-        } else {
-          del_key(KC_ESC);
-          send_keyboard_report();
-        }
-      }
-      break;
-  }
-}

keyboards/at101_blackheart/config.h

@@ -33,8 +33,3 @@
 
 /* force n-key rollover*/
 #define FORCE_NKRO
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)

keyboards/atom47/rev2/config.h

@@ -54,11 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 4

keyboards/atom47/rev3/config.h

@@ -49,12 +49,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCING_DELAY 5
 
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* Backlight configuration
  */
 #define BACKLIGHT_LEVELS 4

keyboards/atomic/config.h

@@ -98,11 +98,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/atomic/keymaps/pvc/config.h

@@ -53,7 +53,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // Enable Keyboard Locking via magic key
 #define KEYBOARD_LOCK_ENABLE
 
-
 /*
  * Force NKRO
  *
@@ -87,11 +86,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -153,7 +147,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-
 //#define VIBRATO_ENABLE
 //#define VIBRATO_STRENGTH_ENABLE
 

keyboards/atreus/config.h

@@ -66,11 +66,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/atreus/keymaps/alphadox/config.h

@@ -54,11 +54,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/atreus/keymaps/dvorak_42_key/config.h

@@ -18,10 +18,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifndef CONFIG_H
 #define CONFIG_H
 
-
 #include "config_common.h"
 
-
 // mouse speed
 
 #define MOUSEKEY_INTERVAL       15
@@ -80,11 +78,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/atreus/keymaps/erlandsona/config.h

@@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-
 /* Make Overloaded Keys switch faster */
 #define TAPPING_TERM 150
 
@@ -70,11 +69,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/atreus62/config.h

@@ -55,11 +55,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/baguette/config.h

@@ -112,11 +112,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -221,4 +216,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LCD_E_PIN        1            //< pin  for Enable line
 #endif
 */
-

keyboards/bantam44/config.h

@@ -56,11 +56,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/bdn9/bdn9.c

@@ -0,0 +1 @@
+#include "bdn9.h"

keyboards/bdn9/bdn9.h

@@ -1,4 +1,4 @@
-/* Copyright 2019 REPLACE_WITH_YOUR_NAME
+/* Copyright 2019 Danny Nguyen <danny@keeb.io>
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,8 +13,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
-#ifndef %KEYBOARD_UPPERCASE%_H
-#define %KEYBOARD_UPPERCASE%_H
+#pragma once
 
 #include "quantum.h"
 
@@ -27,12 +26,10 @@
  * represents the switch matrix.
  */
 #define LAYOUT( \
-    K00, K01, K02, \
-      K10,  K11   \
+    KA1, KA2, KA3, \
+    KB1, KB2, KB3, \
+    KC1, KC2, KC3 \
 ) \
 { \
-    { K00, K01,   K02 }, \
-    { K10, KC_NO, K11 }, \
+    { KA1, KA2, KA3, KB1, KB2, KB3, KC1, KC2, KC3 } \
 }
-
-#endif

keyboards/bdn9/config.h

@@ -0,0 +1,69 @@
+/*
+Copyright 2019 Danny Nguyen <danny@keeb.io>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xCB10
+#define PRODUCT_ID      0x1133
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    Keebio
+#define PRODUCT         BDN9
+#define DESCRIPTION     3x3 Macropad with Rotary Encoders
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 9
+
+/* Keyboard Matrix Assignments */
+#define NO_PIN (~0)
+#define MATRIX_ROW_PINS { NO_PIN }
+#define MATRIX_COL_PINS { D2, D4, F4, D7, B1, B3, E6, B4, B2 }
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define NUMBER_OF_ENCODERS 2
+#define ENCODERS_PAD_A { D1, F5 }
+#define ENCODERS_PAD_B { D0, F6 }
+
+
+#define BACKLIGHT_PIN B5
+// #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 7
+
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 3
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+  /*== all animations enable ==*/
+  #define RGBLIGHT_ANIMATIONS
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/bdn9/keymaps/default/keymap.c

@@ -0,0 +1,41 @@
+/* Copyright 2019 Danny Nguyen <danny@keeb.io>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_A,    KC_B,    KC_C, \
+        BL_STEP, KC_UP,   RGB_MOD, \
+        KC_LEFT, KC_DOWN, KC_RGHT \
+    ),
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        if (clockwise) {
+            tap_code(KC_PGDN);
+        } else {
+            tap_code(KC_PGUP);
+        }
+    }
+    else if (index == 1) {
+        if (clockwise) {
+            tap_code(KC_DOWN);
+        } else {
+            tap_code(KC_UP);
+        }
+    }
+}

keyboards/bdn9/readme.md

@@ -0,0 +1,15 @@
+# BDN9
+
+![BDN9](https://cdn.shopify.com/s/files/1/1851/5125/products/image_bd8d9423-950e-4aad-bea5-665d896f879a_530x@2x.jpg?v=1547909493)
+
+A 3x3 macropad with support for a rotary encoder at the upper two corners.
+
+Keyboard Maintainer: [Bakingpy/nooges](https://github.com/nooges)  
+Hardware Supported: Pro Micro, Elite-C, Proton C   
+Hardware Availability: [Keebio - BDN9](https://keeb.io/products/bdn9-3x3-9-key-macropad-rotary-encoder-support) 
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bdn9:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/bdn9/rules.mk

@@ -0,0 +1,50 @@
+MCU = atmega32u4
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)
+ENCODER_ENABLE = yes

keyboards/bface/config.h

@@ -21,7 +21,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define VENDOR_ID       0x20A0
 #define PRODUCT_ID      0x422D
-// You can edit those at usbconfig.h about line 250. These values will 
+// You can edit those at usbconfig.h about line 250. These values will
 // unforunatly be ignored so far
 #define MANUFACTURER    winkeyless.kr
 #define PRODUCT         b.face
@@ -36,9 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define NO_UART 1
 #define BOOTLOADHID_BOOTLOADER 1
 
-/* key combination for command */
-#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-
 #ifdef BACKLIGHT_ENABLE
 	// the backlight PWM does not work (yet). Therefore, we only have two backlight levels (on/off)
 	#define BACKLIGHT_LEVELS 1

keyboards/bface/keymaps/default/keymap.c

@@ -41,7 +41,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         KC_TRNS,KC_TRNS,KC_TRNS,                KC_TRNS,                        KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS
     ), // */
 };
-
-const uint16_t PROGMEM fn_actions[] = {
-	[0]  = ACTION_LAYER_MOMENTARY(1),
-};

keyboards/bfake/config.h

@@ -43,7 +43,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define NO_UART 1
 
-/* key combination for command */
-#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-
 #endif

keyboards/bfo9000/config.h

@@ -46,11 +46,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* ws2812 RGB LED */
 #define RGB_DI_PIN B4
 
@@ -74,5 +69,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
 
-
 #endif

keyboards/blockey/config.h

@@ -58,8 +58,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define RGBLIGHT_ANIMATIONS
 
-
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
@@ -111,11 +109,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/bmini/config.h

@@ -35,7 +35,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define NO_UART 1
 
-/* key combination for command */
-#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-
 #endif

keyboards/bminiex/config.h

@@ -35,7 +35,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_LEVELS 5
 
 #define NO_UART 1
-
-/* key combination for command */
-#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-

keyboards/bpiphany/frosty_flake/config.h

@@ -85,11 +85,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/bpiphany/kitten_paw/config.h

@@ -20,7 +20,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6050
@@ -53,7 +52,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
@@ -100,11 +98,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/bpiphany/kitten_paw/keymaps/ickerwx/keymap.c

@@ -3,12 +3,13 @@
 
 #define _______ KC_TRNS
 #define XXXXXXX KC_NO
-#define  C(kc) LCTL(KC_##kc)
+#undef C
+#undef S
+#define C(kc) LCTL(KC_##kc)
+#define S(kc) LSFT(KC_##kc)
 #define RA(kc) RALT(KC_##kc)
 #define KC_SLCT KC_SELECT
 #define MEDAPP LT(MEDIA, KC_APP)
-#undef S
-#define S(kc) LSFT(KC_##kc)
 
 uint8_t current_layer_global = 255;
 

keyboards/bpiphany/pegasushoof/config.h

@@ -38,9 +38,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-	keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #endif

keyboards/bpiphany/pegasushoof/keymaps/citadel/keymap.c

@@ -17,11 +17,15 @@
 #include QMK_KEYBOARD_H
 
 /* Allow shortcuts for combos like RALT(KC_RBRC) that don't take up more than 7 characters: */
-#define G(kc) RALT(KC_##kc)
-#define A(kc) LALT(KC_##kc)
+/* Original shortcuts (quantum_keycodes.h) take full-sized keycodes: too long! */
+#undef C
+#undef S
+#undef A
+#undef G
 #define C(kc) LCTL(KC_##kc)
-#undef S /* Original shortcut (quantum_keycodes.h) takes full-sized keycodes: too long! */
 #define S(kc) LSFT(KC_##kc)
+#define A(kc) LALT(KC_##kc)
+#define G(kc) RALT(KC_##kc)
 #define CTALDEL LCTL(LALT(KC_DEL))
 
 enum layers {

keyboards/bpiphany/tiger_lily/config.h

@@ -85,11 +85,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/bpiphany/unloved_bastard/config.h

@@ -83,11 +83,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/bthlabs/geekpad/config.h

@@ -112,11 +112,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/candybar/config.h

@@ -63,11 +63,6 @@
  */
 //#define FORCE_NKRO
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-  keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -118,4 +113,3 @@
 // #define WS2812_DMA_STREAM STM32_DMA1_STREAM2  // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
 //#define WS2812_DMA_CHANNEL 7                  // DMA channel for TIMx_UP
 //#define WS2812_EXTERNAL_PULLUP
-

keyboards/canoe/config.h

@@ -43,7 +43,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define NO_UART 1
 
-/* key combination for command */
-#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
-
 #endif

keyboards/chibios_test/config.h

@@ -44,13 +44,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/chimera_ergo/config.h

@@ -41,12 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define ONESHOT_TIMEOUT 500
 
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/chimera_ls/config.h

@@ -41,12 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define ONESHOT_TIMEOUT 500
 
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/chimera_ortho/config.h

@@ -41,12 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define ONESHOT_TIMEOUT 500
 
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.

keyboards/chocopad/config.h

@@ -35,11 +35,6 @@
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
 #define RGBLIGHT_HUE_STEP 8

keyboards/christmas_tree/config.h

@@ -55,9 +55,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 #endif

keyboards/ckeys/handwire_101/config.h

@@ -121,11 +121,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
@@ -194,4 +189,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_ONESHOT
 //#define NO_ACTION_MACRO
 //#define NO_ACTION_FUNCTION
-

keyboards/ckeys/nakey/config.h

@@ -53,7 +53,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
 
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
@@ -105,11 +104,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/ckeys/obelus/config.h

@@ -53,7 +53,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
 
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCING_DELAY 5
 
@@ -100,11 +99,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/clueboard/17/17.c

@@ -12,13 +12,11 @@ void matrix_init_kb(void) {
     MCUCR |= (1<<JTD);
 };
 
-void led_set_kb(uint8_t usb_led)
-{
+void led_set_kb(uint8_t usb_led) {
     print("led_set\n");
 }
 
-void backlight_init_ports(void)
-{
+void backlight_init_ports(void) {
     // Set C7 to output
     DDRC |= (1<<7);
 
@@ -29,8 +27,7 @@ void backlight_init_ports(void)
     TCCR4B = 0b00000001;
 }
 
-void backlight_set(uint8_t level)
-{
+void backlight_set(uint8_t level) {
     // Determine the PWM level
     switch (level)
     {

keyboards/clueboard/17/17.h

@@ -19,18 +19,21 @@
  */
 // The first section contains all of the arguments
 // The second converts the arguments into a two-dimensional array
-#define KEYMAP( \
+#define LAYOUT_numpad_5x4( \
     k00, k01, k02, k03, \
-    k10, k11, k12, k13, \
-    k20, k21, k22, \
-    k30, k31, k32, k33, \
-    k40,      k42 \
+    k10, k11, k12,      \
+    k20, k21, k22, k13, \
+    k30, k31, k32,      \
+    k40,      k42, k33  \
 ) { \
-    { k00, k01, k02, k03, }, \
-    { k10, k11, k12, k13, }, \
-    { k20, k21, k22, KC_NO, }, \
-    { k30, k31, k32, k33, }, \
-    { k40, KC_NO, k42, KC_NO } \
+    { k00, k01,   k02, k03   }, \
+    { k10, k11,   k12, k13   }, \
+    { k20, k21,   k22, KC_NO }, \
+    { k30, k31,   k32, k33   }, \
+    { k40, KC_NO, k42, KC_NO }  \
 }
 
+#define LAYOUT LAYOUT_numpad_5x4
+#define KEYMAP LAYOUT_numpad_5x4
+
 #endif

keyboards/clueboard/17/config.h

@@ -62,11 +62,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* Underlight configuration
  */
 #define RGB_DI_PIN F6

keyboards/clueboard/17/info.json

@@ -0,0 +1,31 @@
+{
+  "keyboard_name": "Clueboard 17% (Cluepad)",
+  "keyboard_folder": "clueboard/17",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 4,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_numpad_5x4": {
+      "layout": [
+        {"label":"Num Lock", "x":0, "y":0},
+        {"label":"/", "x":1, "y":0},
+        {"label":"*", "x":2, "y":0},
+        {"label":"-", "x":3, "y":0},
+        {"label":"7", "x":0, "y":1},
+        {"label":"8", "x":1, "y":1},
+        {"label":"9", "x":2, "y":1},
+        {"label":"4", "x":0, "y":2},
+        {"label":"5", "x":1, "y":2},
+        {"label":"6", "x":2, "y":2},
+        {"label":"+", "x":3, "y":1, "h":2},
+        {"label":"1", "x":0, "y":3},
+        {"label":"2", "x":1, "y":3},
+        {"label":"3", "x":2, "y":3},
+        {"label":"0", "x":0, "y":4, "w":2},
+        {"label":".", "x":2, "y":4},
+        {"label":"Enter", "x":3, "y":3, "h":2}
+      ]
+    }
+  }
+}

keyboards/clueboard/17/keymaps/default/keymap.c

@@ -1,6 +1,4 @@
-#include "17.h"
-
-#include "backlight.h"
+#include QMK_KEYBOARD_H
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
@@ -8,7 +6,6 @@
 // entirely and just use numbers.
 #define _BL 0
 #define _FL 1
-#define _RS 2
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   /* Keymap _BL: (Base Layer) Default Layer
@@ -24,12 +21,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |        0|   .| Ent|
    * '-------------------'
    */
-[_BL] = KEYMAP(
-  LT(_FL, KC_NLCK), KC_PSLS, KC_PAST, KC_PMNS, \
-  KC_P7,            KC_P8,   KC_P9,   KC_PPLS, \
-  KC_P4,            KC_P5,   KC_P6, \
-  KC_P1,            KC_P2,   KC_P3,   KC_PENT, \
-  KC_P0,                     KC_PDOT),
+  [_BL] = LAYOUT_numpad_5x4(
+    LT(_FL, KC_NLCK), KC_PSLS, KC_PAST, KC_PMNS, \
+    KC_P7,            KC_P8,   KC_P9,            \
+    KC_P4,            KC_P5,   KC_P6,   KC_PPLS, \
+    KC_P1,            KC_P2,   KC_P3,            \
+    KC_P0,                     KC_PDOT, KC_PENT  \
+  ),
 
   /* Keymap _FL: Function Layer
    * .-------------------.
@@ -44,10 +42,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
    * |      Fn1|    | Fn7|
    * '-------------------'
    */
-[_FL] = KEYMAP(
-  LT(_FL, KC_NLCK), KC_TRNS, KC_TRNS, RGB_TOG, \
-  KC_TRNS,          RGB_SAI,    KC_TRNS, RGB_VAI, \
-  RGB_HUD,             BL_STEP, RGB_HUI, \
-  KC_TRNS,          RGB_SAD,    KC_TRNS, RGB_VAD, \
-  RGB_MOD,                      KC_TRNS)
+  [_FL] = LAYOUT_numpad_5x4(
+    LT(_FL, KC_NLCK), _______, _______, RGB_TOG, \
+    _______,          RGB_SAI, _______,          \
+    RGB_HUD,          BL_STEP, RGB_HUI, RGB_VAI, \
+    _______,          RGB_SAD, _______,          \
+    RGB_MOD,                   _______, RGB_VAD  \
+  )
 };

keyboards/clueboard/17/readme.md

@@ -1,6 +1,6 @@
 # Clueboard 17% (Formerly Cluepad)
 
-![Clueboard 17%](https://static1.squarespace.com/static/55c13bdee4b099be5dcb82eb/5842fbdce3df28eae5ec557e/5844fb2cb8a79bbdfd63bad1/1498501250178/IMGP3931.jpg?format=750w)
+![Clueboard 17%](https://i.imgur.com/3XBC5c0.jpg)
 
 A basic 17 key numpad PCB.
 
@@ -13,4 +13,4 @@ Make example for this keyboard (after setting up your build environment):
 
     make clueboard/17:default
 
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/clueboard/17/rules.mk

@@ -1,6 +1,4 @@
-
 # MCU name
-#MCU = at90usb1287
 MCU = atmega32u4
 
 # Processor frequency.
@@ -50,16 +48,13 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 
 # Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-# MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
-# EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-# CONSOLE_ENABLE = yes	# Console for debug(+400)
-# COMMAND_ENABLE = yes    # Commands for debug and configuration
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes  # Enable numpad's backlight functionality
-RGBLIGHT_ENABLE = yes
-# MIDI_ENABLE = YES 		# MIDI controls
-# UNICODE_ENABLE = YES 		# Unicode
-# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
+BOOTMAGIC_ENABLE = no	      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode

keyboards/clueboard/2x1800/2x1800.c

@@ -21,10 +21,6 @@ void matrix_init_kb(void) {
 	DDRB |= (1<<5);  // Capslock
 	DDRB |= (1<<6);  // Scroll Lock
 
-	// JTAG disable for PORT F. write JTD bit twice within four cycles.
-	MCUCR |= (1<<JTD);
-	MCUCR |= (1<<JTD);
-
 	// Run the keymap level init
 	matrix_init_user();
 }
@@ -38,25 +34,24 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
 }
 
 void led_set_kb(uint8_t usb_led) {
+  // Toggle numlock as needed
 	if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-		// Turn numlock on
 		PORTB |= (1<<4);
 	} else {
-		// Turn numlock off
 		PORTB &= ~(1<<4);
 	}
+
+  // Toggle capslock as needed
 	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-		// Turn capslock on
 		PORTB |= (1<<5);
 	} else {
-		// Turn capslock off
 		PORTB &= ~(1<<5);
 	}
+
+	// Toggle scrolllock as needed
 	if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
-		// Turn scroll lock on
 		PORTB |= (1<<6);
 	} else {
-		// Turn scroll lock off
 		PORTB &= ~(1<<6);
 	}
 }

keyboards/clueboard/2x1800/2x1800.h

@@ -21,7 +21,7 @@
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguments
 // The second converts the arguments into a two-dimensional array
-#define LAYOUT( \
+#define LAYOUT_all( \
       k00, k01, k02, k03,    k04,   k06, k07, k08, k09,   k0a, k60, k61, k62,   k63, k64, k65, k66,    k67, k68, k69, k6a, \
       k10, k11, k12, k13,   k14, k15, k16, k17, k18, k19, k1a, k70, k71, k72, k73, k74, k75,    k76,   k77, k78, k79, k7a, \
       k20, k21, k22, k23,    k24,  k25, k26, k27, k28, k29, k2a, k80, k81, k82, k83, k84, k85,   k86,  k87, k88, k89, k8a, \
@@ -90,4 +90,6 @@
     { kb0, KC_NO, KC_NO, KC_NO, kb4, kb5, kb6, kb7, kb8, kb9, KC_NO } \
 }
 
+#define LAYOUT LAYOUT_all
+
 #endif

keyboards/clueboard/2x1800/config.h

@@ -58,6 +58,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* audio support */
 #define B7_AUDIO
 #define C4_AUDIO
+#define AUDIO_CLICKY
 
 /* number of backlight levels */
 // #define BACKLIGHT_PIN B7
@@ -114,11 +115,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
-/* key combination for magic key command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
 /* control how magic key switches layers */
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
 //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true

keyboards/clueboard/2x1800/info.json

@@ -1,5 +1,5 @@
 {
-  "keyboard_name": "CB 2x1800",
+  "keyboard_name": "Clueboard 2x1800",
   "url": "",
   "maintainer": "skullydazed",
   "width": 24,
@@ -8,388 +8,34 @@
     "LAYOUT": {
       "key_count": 127,
       "layout": [
-        {"label":"Home", "x":0, "y":0},
-        {"label":"End", "x":1, "y":0},
-        {"label":"PgUp", "x":2, "y":0},
-        {"label":"PgDn", "x":3, "y":0},
-        {"label":"Esc", "x":4.75, "y":0},
-        {"label":"F1", "x":6.25, "y":0},
-        {"label":"F2", "x":7.25, "y":0},
-        {"label":"F3", "x":8.25, "y":0},
-        {"label":"F4", "x":9.25, "y":0},
-        {"label":"F5", "x":10.75, "y":0},
-        {"label":"F6", "x":11.75, "y":0},
-        {"label":"F7", "x":12.75, "y":0},
-        {"label":"F8", "x":13.75, "y":0},
-        {"label":"F9", "x":15.25, "y":0},
-        {"label":"F10", "x":16.25, "y":0},
-        {"label":"F11", "x":17.25, "y":0},
-        {"label":"F12", "x":18.25, "y":0},
-        {"label":"PrtSc", "x":20, "y":0},
-        {"label":"Scroll Lock", "x":21, "y":0},
-        {"label":"Pause", "x":22, "y":0},
-        {"label":"Insert", "x":23, "y":0},
-        {"label":"-", "x":0, "y":1.25},
-        {"label":"Num Lock", "x":1, "y":1.25},
-        {"label":"/", "x":2, "y":1.25},
-        {"label":"*", "x":3, "y":1.25},
-        {"label":"~", "x":4.5, "y":1.25},
-        {"label":"!", "x":5.5, "y":1.25},
-        {"label":"@", "x":6.5, "y":1.25},
-        {"label":"#", "x":7.5, "y":1.25},
-        {"label":"$", "x":8.5, "y":1.25},
-        {"label":"%", "x":9.5, "y":1.25},
-        {"label":"^", "x":10.5, "y":1.25},
-        {"label":"&", "x":11.5, "y":1.25},
-        {"label":"*", "x":12.5, "y":1.25},
-        {"label":"(", "x":13.5, "y":1.25},
-        {"label":")", "x":14.5, "y":1.25},
-        {"label":"_", "x":15.5, "y":1.25},
-        {"label":"+", "x":16.5, "y":1.25},
-        {"label":"Backspace", "x":17.5, "y":1.25, "w":2},
-        {"label":"Num Lock", "x":20, "y":1.25},
-        {"label":"/", "x":21, "y":1.25},
-        {"label":"*", "x":22, "y":1.25},
-        {"label":"-", "x":23, "y":1.25},
-        {"label":"+", "x":0, "y":2.25, "h":2},
-        {"label":"7", "x":1, "y":2.25},
-        {"label":"8", "x":2, "y":2.25},
-        {"label":"9", "x":3, "y":2.25},
-        {"label":"Tab", "x":4.5, "y":2.25, "w":1.5},
-        {"label":"Q", "x":6, "y":2.25},
-        {"label":"W", "x":7, "y":2.25},
-        {"label":"E", "x":8, "y":2.25},
-        {"label":"R", "x":9, "y":2.25},
-        {"label":"T", "x":10, "y":2.25},
-        {"label":"Y", "x":11, "y":2.25},
-        {"label":"U", "x":12, "y":2.25},
-        {"label":"I", "x":13, "y":2.25},
-        {"label":"O", "x":14, "y":2.25},
-        {"label":"P", "x":15, "y":2.25},
-        {"label":"{", "x":16, "y":2.25},
-        {"label":"}", "x":17, "y":2.25},
-        {"label":"|", "x":18, "y":2.25, "w":1.5},
-        {"label":"7", "x":20, "y":2.25},
-        {"label":"8", "x":21, "y":2.25},
-        {"label":"9", "x":22, "y":2.25},
-        {"label":"+", "x":23, "y":2.25, "h":2},
-        {"label":"4", "x":1, "y":3.25},
-        {"label":"5", "x":2, "y":3.25},
-        {"label":"6", "x":3, "y":3.25},
-        {"label":"Caps Lock", "x":4.5, "y":3.25, "w":1.75},
-        {"label":"A", "x":6.25, "y":3.25},
-        {"label":"S", "x":7.25, "y":3.25},
-        {"label":"D", "x":8.25, "y":3.25},
-        {"label":"F", "x":9.25, "y":3.25},
-        {"label":"G", "x":10.25, "y":3.25},
-        {"label":"H", "x":11.25, "y":3.25},
-        {"label":"J", "x":12.25, "y":3.25},
-        {"label":"K", "x":13.25, "y":3.25},
-        {"label":"L", "x":14.25, "y":3.25},
-        {"label":":", "x":15.25, "y":3.25},
-        {"label":"\"", "x":16.25, "y":3.25},
-        {"label":"Enter", "x":17.25, "y":3.25, "w":2.25},
-        {"label":"4", "x":20, "y":3.25},
-        {"label":"5", "x":21, "y":3.25},
-        {"label":"6", "x":22, "y":3.25},
-        {"label":"Enter", "x":0, "y":4.25, "h":2},
-        {"label":"1", "x":1, "y":4.25},
-        {"label":"2", "x":2, "y":4.25},
-        {"label":"3", "x":3, "y":4.25},
-        {"label":"\\u2191", "x":4.25, "y":4.5},
-        {"label":"Shift", "x":5.5, "y":4.25, "w":1.25},
-        {"label":"Z", "x":6.75, "y":4.25},
-        {"label":"X", "x":7.75, "y":4.25},
-        {"label":"C", "x":8.75, "y":4.25},
-        {"label":"V", "x":9.75, "y":4.25},
-        {"label":"B", "x":10.75, "y":4.25},
-        {"label":"N", "x":11.75, "y":4.25},
-        {"label":"M", "x":12.75, "y":4.25},
-        {"label":"<", "x":13.75, "y":4.25},
-        {"label":">", "x":14.75, "y":4.25},
-        {"label":"?", "x":15.75, "y":4.25},
-        {"label":"Shift", "x":16.75, "y":4.25, "w":1.75},
-        {"label":"\\u2191", "x":18.75, "y":4.5},
-        {"label":"1", "x":20, "y":4.25},
-        {"label":"2", "x":21, "y":4.25},
-        {"label":"3", "x":22, "y":4.25},
-        {"label":"Enter", "x":23, "y":4.25, "h":2},
-        {"label":"0", "x":1, "y":5.25},
-        {"label":".", "x":2, "y":5.25},
-        {"label":"\\u2190", "x":3.25, "y":5.5},
-        {"label":"\\u2193", "x":4.25, "y":5.5},
-        {"label":"\\u2192", "x":5.25, "y":5.5},
-        {"label":"Ctrl", "x":6.5, "y":5.25},
-        {"label":"Win", "x":7.5, "y":5.25},
-        {"label":"Alt", "x":8.5, "y":5.25},
-        {"label":"1u", "x":9.5, "y":5.25},
-        {"label":"1u", "x":10.5, "y":5.25},
-        {"label":"1u", "x":11.5, "y":5.25},
-        {"label":"1u", "x":12.5, "y":5.25},
-        {"label":"Alt", "x":13.5, "y":5.25},
-        {"label":"Win", "x":14.5, "y":5.25},
-        {"label":"Menu", "x":15.5, "y":5.25},
-        {"label":"Ctrl", "x":16.5, "y":5.25},
-        {"label":"\\u2190", "x":17.75, "y":5.5},
-        {"label":"\\u2193", "x":18.75, "y":5.5},
-        {"label":"\\u2192", "x":19.75, "y":5.5},
-        {"label":"0", "x":21, "y":5.25},
-        {"label":".", "x":22, "y":5.25}
+        {"label":"Home", "x":0, "y":0}, {"label":"End", "x":1, "y":0}, {"label":"PgUp", "x":2, "y":0}, {"label":"PgDn", "x":3, "y":0}, {"label":"Esc", "x":4.75, "y":0}, {"label":"F1", "x":6.25, "y":0}, {"label":"F2", "x":7.25, "y":0}, {"label":"F3", "x":8.25, "y":0}, {"label":"F4", "x":9.25, "y":0}, {"label":"F5", "x":10.75, "y":0}, {"label":"F6", "x":11.75, "y":0}, {"label":"F7", "x":12.75, "y":0}, {"label":"F8", "x":13.75, "y":0}, {"label":"F9", "x":15.25, "y":0}, {"label":"F10", "x":16.25, "y":0}, {"label":"F11", "x":17.25, "y":0}, {"label":"F12", "x":18.25, "y":0}, {"label":"PrtSc", "x":20, "y":0}, {"label":"Scroll Lock", "x":21, "y":0}, {"label":"Pause", "x":22, "y":0}, {"label":"Insert", "x":23, "y":0},
+        {"label":"-", "x":0, "y":1.25}, {"label":"Num Lock", "x":1, "y":1.25}, {"label":"/", "x":2, "y":1.25}, {"label":"*", "x":3, "y":1.25}, {"label":"~", "x":4.5, "y":1.25}, {"label":"!", "x":5.5, "y":1.25}, {"label":"@", "x":6.5, "y":1.25}, {"label":"#", "x":7.5, "y":1.25}, {"label":"$", "x":8.5, "y":1.25}, {"label":"%", "x":9.5, "y":1.25}, {"label":"^", "x":10.5, "y":1.25}, {"label":"&", "x":11.5, "y":1.25}, {"label":"*", "x":12.5, "y":1.25}, {"label":"(", "x":13.5, "y":1.25}, {"label":")", "x":14.5, "y":1.25}, {"label":"_", "x":15.5, "y":1.25}, {"label":"+", "x":16.5, "y":1.25}, {"label":"Backspace", "x":17.5, "y":1.25, "w":2}, {"label":"Num Lock", "x":20, "y":1.25}, {"label":"/", "x":21, "y":1.25}, {"label":"*", "x":22, "y":1.25}, {"label":"-", "x":23, "y":1.25},
+        {"label":"+", "x":0, "y":2.25, "h":2}, {"label":"7", "x":1, "y":2.25}, {"label":"8", "x":2, "y":2.25}, {"label":"9", "x":3, "y":2.25}, {"label":"Tab", "x":4.5, "y":2.25, "w":1.5}, {"label":"Q", "x":6, "y":2.25}, {"label":"W", "x":7, "y":2.25}, {"label":"E", "x":8, "y":2.25}, {"label":"R", "x":9, "y":2.25}, {"label":"T", "x":10, "y":2.25}, {"label":"Y", "x":11, "y":2.25}, {"label":"U", "x":12, "y":2.25}, {"label":"I", "x":13, "y":2.25}, {"label":"O", "x":14, "y":2.25}, {"label":"P", "x":15, "y":2.25}, {"label":"{", "x":16, "y":2.25}, {"label":"}", "x":17, "y":2.25}, {"label":"|", "x":18, "y":2.25, "w":1.5}, {"label":"7", "x":20, "y":2.25}, {"label":"8", "x":21, "y":2.25}, {"label":"9", "x":22, "y":2.25}, {"label":"+", "x":23, "y":2.25, "h":2},
+        {"label":"4", "x":1, "y":3.25}, {"label":"5", "x":2, "y":3.25}, {"label":"6", "x":3, "y":3.25}, {"label":"Caps Lock", "x":4.5, "y":3.25, "w":1.75}, {"label":"A", "x":6.25, "y":3.25}, {"label":"S", "x":7.25, "y":3.25}, {"label":"D", "x":8.25, "y":3.25}, {"label":"F", "x":9.25, "y":3.25}, {"label":"G", "x":10.25, "y":3.25}, {"label":"H", "x":11.25, "y":3.25}, {"label":"J", "x":12.25, "y":3.25}, {"label":"K", "x":13.25, "y":3.25}, {"label":"L", "x":14.25, "y":3.25}, {"label":":", "x":15.25, "y":3.25}, {"label":"\"", "x":16.25, "y":3.25}, {"label":"Enter", "x":17.25, "y":3.25, "w":2.25}, {"label":"4", "x":20, "y":3.25}, {"label":"5", "x":21, "y":3.25}, {"label":"6", "x":22, "y":3.25},
+        {"label":"Enter", "x":0, "y":4.25, "h":2}, {"label":"1", "x":1, "y":4.25}, {"label":"2", "x":2, "y":4.25}, {"label":"3", "x":3, "y":4.25}, {"label":"\\u2191", "x":4.25, "y":4.5}, {"label":"Shift", "x":5.5, "y":4.25, "w":1.25}, {"label":"Z", "x":6.75, "y":4.25}, {"label":"X", "x":7.75, "y":4.25}, {"label":"C", "x":8.75, "y":4.25}, {"label":"V", "x":9.75, "y":4.25}, {"label":"B", "x":10.75, "y":4.25}, {"label":"N", "x":11.75, "y":4.25}, {"label":"M", "x":12.75, "y":4.25}, {"label":"<", "x":13.75, "y":4.25}, {"label":">", "x":14.75, "y":4.25}, {"label":"?", "x":15.75, "y":4.25}, {"label":"Shift", "x":16.75, "y":4.25, "w":1.75}, {"label":"\\u2191", "x":18.75, "y":4.5}, {"label":"1", "x":20, "y":4.25}, {"label":"2", "x":21, "y":4.25}, {"label":"3", "x":22, "y":4.25}, {"label":"Enter", "x":23, "y":4.25, "h":2},
+        {"label":"0", "x":1, "y":5.25}, {"label":".", "x":2, "y":5.25}, {"label":"\\u2190", "x":3.25, "y":5.5}, {"label":"\\u2193", "x":4.25, "y":5.5}, {"label":"\\u2192", "x":5.25, "y":5.5}, {"label":"Ctrl", "x":6.5, "y":5.25}, {"label":"Win", "x":7.5, "y":5.25}, {"label":"Alt", "x":8.5, "y":5.25}, {"label":"1u", "x":9.5, "y":5.25}, {"label":"1u", "x":10.5, "y":5.25}, {"label":"1u", "x":11.5, "y":5.25}, {"label":"1u", "x":12.5, "y":5.25}, {"label":"Alt", "x":13.5, "y":5.25}, {"label":"Win", "x":14.5, "y":5.25}, {"label":"Menu", "x":15.5, "y":5.25}, {"label":"Ctrl", "x":16.5, "y":5.25}, {"label":"\\u2190", "x":17.75, "y":5.5}, {"label":"\\u2193", "x":18.75, "y":5.5}, {"label":"\\u2192", "x":19.75, "y":5.5}, {"label":"0", "x":21, "y":5.25}, {"label":".", "x":22, "y":5.25}
       ]
     },
     "LAYOUT_7u_space": {
       "key_count": 121,
       "layout": [
-        {"label":"k00", "x":0, "y":0},
-        {"label":"k01", "x":1, "y":0},
-        {"label":"k02", "x":2, "y":0},
-        {"label":"k03", "x":3, "y":0},
-        {"label":"k04", "x":4.75, "y":0},
-        {"label":"k06", "x":6.25, "y":0},
-        {"label":"k07", "x":7.25, "y":0},
-        {"label":"k08", "x":8.25, "y":0},
-        {"label":"k09", "x":9.25, "y":0},
-        {"label":"k0a", "x":10.75, "y":0},
-        {"label":"k60", "x":11.75, "y":0},
-        {"label":"k61", "x":12.75, "y":0},
-        {"label":"k62", "x":13.75, "y":0},
-        {"label":"k63", "x":15.25, "y":0},
-        {"label":"k64", "x":16.25, "y":0},
-        {"label":"k65", "x":17.25, "y":0},
-        {"label":"k66", "x":18.25, "y":0},
-        {"label":"k67", "x":20, "y":0},
-        {"label":"k68", "x":21, "y":0},
-        {"label":"k69", "x":22, "y":0},
-        {"label":"k6a", "x":23, "y":0},
-        {"label":"k10", "x":0, "y":1.25},
-        {"label":"k11", "x":1, "y":1.25},
-        {"label":"k12", "x":2, "y":1.25},
-        {"label":"k13", "x":3, "y":1.25},
-        {"label":"k14", "x":4.5, "y":1.25},
-        {"label":"k15", "x":5.5, "y":1.25},
-        {"label":"k16", "x":6.5, "y":1.25},
-        {"label":"k17", "x":7.5, "y":1.25},
-        {"label":"k18", "x":8.5, "y":1.25},
-        {"label":"k19", "x":9.5, "y":1.25},
-        {"label":"k0a", "x":10.5, "y":1.25},
-        {"label":"k70", "x":11.5, "y":1.25},
-        {"label":"k71", "x":12.5, "y":1.25},
-        {"label":"k72", "x":13.5, "y":1.25},
-        {"label":"k73", "x":14.5, "y":1.25},
-        {"label":"k74", "x":15.5, "y":1.25},
-        {"label":"k75", "x":16.5, "y":1.25},
-        {"label":"k76", "x":17.5, "y":1.25, "w":2},
-        {"label":"k77", "x":20, "y":1.25},
-        {"label":"k78", "x":21, "y":1.25},
-        {"label":"k79", "x":22, "y":1.25},
-        {"label":"k7a", "x":23, "y":1.25},
-        {"label":"k20", "x":0, "y":2.25, "h":2},
-        {"label":"k21", "x":1, "y":2.25},
-        {"label":"k22", "x":2, "y":2.25},
-        {"label":"k23", "x":3, "y":2.25},
-        {"label":"k24", "x":4.5, "y":2.25, "w":1.5},
-        {"label":"k25", "x":6, "y":2.25},
-        {"label":"k26", "x":7, "y":2.25},
-        {"label":"k27", "x":8, "y":2.25},
-        {"label":"k28", "x":9, "y":2.25},
-        {"label":"k29", "x":10, "y":2.25},
-        {"label":"k2a", "x":11, "y":2.25},
-        {"label":"k80", "x":12, "y":2.25},
-        {"label":"k81", "x":13, "y":2.25},
-        {"label":"k82", "x":14, "y":2.25},
-        {"label":"k83", "x":15, "y":2.25},
-        {"label":"k84", "x":16, "y":2.25},
-        {"label":"k85", "x":17, "y":2.25},
-        {"label":"k86", "x":18, "y":2.25, "w":1.5},
-        {"label":"k87", "x":20, "y":2.25},
-        {"label":"k88", "x":21, "y":2.25},
-        {"label":"k89", "x":22, "y":2.25},
-        {"label":"k8a", "x":23, "y":2.25, "h":2},
-        {"label":"k31", "x":1, "y":3.25},
-        {"label":"k32", "x":2, "y":3.25},
-        {"label":"k33", "x":3, "y":3.25},
-        {"label":"k34", "x":4.5, "y":3.25, "w":1.75},
-        {"label":"k35", "x":6.25, "y":3.25},
-        {"label":"k36", "x":7.25, "y":3.25},
-        {"label":"k37", "x":8.25, "y":3.25},
-        {"label":"k38", "x":9.25, "y":3.25},
-        {"label":"k39", "x":10.25, "y":3.25},
-        {"label":"k3a", "x":11.25, "y":3.25},
-        {"label":"k90", "x":12.25, "y":3.25},
-        {"label":"k91", "x":13.25, "y":3.25},
-        {"label":"k92", "x":14.25, "y":3.25},
-        {"label":"k93", "x":15.25, "y":3.25},
-        {"label":"k94", "x":16.25, "y":3.25},
-        {"label":"k95", "x":17.25, "y":3.25, "w":2.25},
-        {"label":"k97", "x":20, "y":3.25},
-        {"label":"k98", "x":21, "y":3.25},
-        {"label":"k99", "x":22, "y":3.25},
-        {"label":"k40", "x":0, "y":4.25, "h":2},
-        {"label":"k41", "x":1, "y":4.25},
-        {"label":"k42", "x":2, "y":4.25},
-        {"label":"k43", "x":3, "y":4.25},
-        {"label":"k45", "x":5.5, "y":4.25, "w":1.25},
-        {"label":"k46", "x":6.75, "y":4.25},
-        {"label":"k47", "x":7.75, "y":4.25},
-        {"label":"k48", "x":8.75, "y":4.25},
-        {"label":"k49", "x":9.75, "y":4.25},
-        {"label":"k4a", "x":10.75, "y":4.25},
-        {"label":"ka0", "x":11.75, "y":4.25},
-        {"label":"ka1", "x":12.75, "y":4.25},
-        {"label":"ka2", "x":13.75, "y":4.25},
-        {"label":"ka3", "x":14.75, "y":4.25},
-        {"label":"ka4", "x":15.75, "y":4.25},
-        {"label":"ka5", "x":16.75, "y":4.25, "w":1.75},
-        {"label":"ka7", "x":20, "y":4.25},
-        {"label":"ka8", "x":21, "y":4.25},
-        {"label":"ka9", "x":22, "y":4.25},
-        {"label":"kaa", "x":23, "y":4.25, "h":2},
-        {"label":"k44", "x":4.25, "y":4.5},
-        {"label":"k96", "x":18.75, "y":4.5},
-        {"label":"k51", "x":1, "y":5.25},
-        {"label":"k52", "x":2, "y":5.25},
-        {"label":"k56", "x":6.5, "y":5.25},
-        {"label":"k57", "x":7.5, "y":5.25},
-        {"label":"kb0", "x":8.5, "y":5.25, "w":7},
-        {"label":"kb4", "x":15.5, "y":5.25},
-        {"label":"kb5", "x":16.5, "y":5.25},
-        {"label":"kb8", "x":21, "y":5.25},
-        {"label":"kb9", "x":22, "y":5.25},
-        {"label":"k53", "x":3.25, "y":5.5},
-        {"label":"k54", "x":4.25, "y":5.5},
-        {"label":"k55", "x":5.25, "y":5.5},
-        {"label":"ka6", "x":17.75, "y":5.5},
-        {"label":"kb6", "x":18.75, "y":5.5},
-        {"label":"kb7", "x":19.75, "y":5.5}
+        {"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4.75, "y":0}, {"label":"k06", "x":6.25, "y":0}, {"label":"k07", "x":7.25, "y":0}, {"label":"k08", "x":8.25, "y":0}, {"label":"k09", "x":9.25, "y":0}, {"label":"k0a", "x":10.75, "y":0}, {"label":"k60", "x":11.75, "y":0}, {"label":"k61", "x":12.75, "y":0}, {"label":"k62", "x":13.75, "y":0}, {"label":"k63", "x":15.25, "y":0}, {"label":"k64", "x":16.25, "y":0}, {"label":"k65", "x":17.25, "y":0}, {"label":"k66", "x":18.25, "y":0}, {"label":"k67", "x":20, "y":0}, {"label":"k68", "x":21, "y":0}, {"label":"k69", "x":22, "y":0}, {"label":"k6a", "x":23, "y":0},
+        {"label":"k10", "x":0, "y":1.25}, {"label":"k11", "x":1, "y":1.25}, {"label":"k12", "x":2, "y":1.25}, {"label":"k13", "x":3, "y":1.25}, {"label":"k14", "x":4.5, "y":1.25}, {"label":"k15", "x":5.5, "y":1.25}, {"label":"k16", "x":6.5, "y":1.25}, {"label":"k17", "x":7.5, "y":1.25}, {"label":"k18", "x":8.5, "y":1.25}, {"label":"k19", "x":9.5, "y":1.25}, {"label":"k0a", "x":10.5, "y":1.25}, {"label":"k70", "x":11.5, "y":1.25}, {"label":"k71", "x":12.5, "y":1.25}, {"label":"k72", "x":13.5, "y":1.25}, {"label":"k73", "x":14.5, "y":1.25}, {"label":"k74", "x":15.5, "y":1.25}, {"label":"k75", "x":16.5, "y":1.25}, {"label":"k76", "x":17.5, "y":1.25, "w":2}, {"label":"k77", "x":20, "y":1.25}, {"label":"k78", "x":21, "y":1.25}, {"label":"k79", "x":22, "y":1.25}, {"label":"k7a", "x":23, "y":1.25},
+        {"label":"k20", "x":0, "y":2.25, "h":2}, {"label":"k21", "x":1, "y":2.25}, {"label":"k22", "x":2, "y":2.25}, {"label":"k23", "x":3, "y":2.25}, {"label":"k24", "x":4.5, "y":2.25, "w":1.5}, {"label":"k25", "x":6, "y":2.25}, {"label":"k26", "x":7, "y":2.25}, {"label":"k27", "x":8, "y":2.25}, {"label":"k28", "x":9, "y":2.25}, {"label":"k29", "x":10, "y":2.25}, {"label":"k2a", "x":11, "y":2.25}, {"label":"k80", "x":12, "y":2.25}, {"label":"k81", "x":13, "y":2.25}, {"label":"k82", "x":14, "y":2.25}, {"label":"k83", "x":15, "y":2.25}, {"label":"k84", "x":16, "y":2.25}, {"label":"k85", "x":17, "y":2.25}, {"label":"k86", "x":18, "y":2.25, "w":1.5}, {"label":"k87", "x":20, "y":2.25}, {"label":"k88", "x":21, "y":2.25}, {"label":"k89", "x":22, "y":2.25}, {"label":"k8a", "x":23, "y":2.25, "h":2},
+        {"label":"k31", "x":1, "y":3.25}, {"label":"k32", "x":2, "y":3.25}, {"label":"k33", "x":3, "y":3.25}, {"label":"k34", "x":4.5, "y":3.25, "w":1.75}, {"label":"k35", "x":6.25, "y":3.25}, {"label":"k36", "x":7.25, "y":3.25}, {"label":"k37", "x":8.25, "y":3.25}, {"label":"k38", "x":9.25, "y":3.25}, {"label":"k39", "x":10.25, "y":3.25}, {"label":"k3a", "x":11.25, "y":3.25}, {"label":"k90", "x":12.25, "y":3.25}, {"label":"k91", "x":13.25, "y":3.25}, {"label":"k92", "x":14.25, "y":3.25}, {"label":"k93", "x":15.25, "y":3.25}, {"label":"k94", "x":16.25, "y":3.25}, {"label":"k95", "x":17.25, "y":3.25, "w":2.25}, {"label":"k97", "x":20, "y":3.25}, {"label":"k98", "x":21, "y":3.25}, {"label":"k99", "x":22, "y":3.25},
+        {"label":"k40", "x":0, "y":4.25, "h":2}, {"label":"k41", "x":1, "y":4.25}, {"label":"k42", "x":2, "y":4.25}, {"label":"k43", "x":3, "y":4.25}, {"label":"k45", "x":5.5, "y":4.25, "w":1.25}, {"label":"k46", "x":6.75, "y":4.25}, {"label":"k47", "x":7.75, "y":4.25}, {"label":"k48", "x":8.75, "y":4.25}, {"label":"k49", "x":9.75, "y":4.25}, {"label":"k4a", "x":10.75, "y":4.25}, {"label":"ka0", "x":11.75, "y":4.25}, {"label":"ka1", "x":12.75, "y":4.25}, {"label":"ka2", "x":13.75, "y":4.25}, {"label":"ka3", "x":14.75, "y":4.25}, {"label":"ka4", "x":15.75, "y":4.25}, {"label":"ka5", "x":16.75, "y":4.25, "w":1.75}, {"label":"ka7", "x":20, "y":4.25}, {"label":"ka8", "x":21, "y":4.25}, {"label":"ka9", "x":22, "y":4.25}, {"label":"kaa", "x":23, "y":4.25, "h":2}, {"label":"k44", "x":4.25, "y":4.5}, {"label":"k96", "x":18.75, "y":4.5},
+        {"label":"k51", "x":1, "y":5.25}, {"label":"k52", "x":2, "y":5.25}, {"label":"k56", "x":6.5, "y":5.25}, {"label":"k57", "x":7.5, "y":5.25}, {"label":"kb0", "x":8.5, "y":5.25, "w":7}, {"label":"kb4", "x":15.5, "y":5.25}, {"label":"kb5", "x":16.5, "y":5.25}, {"label":"kb8", "x":21, "y":5.25}, {"label":"kb9", "x":22, "y":5.25}, {"label":"k53", "x":3.25, "y":5.5}, {"label":"k54", "x":4.25, "y":5.5}, {"label":"k55", "x":5.25, "y":5.5}, {"label":"ka6", "x":17.75, "y":5.5}, {"label":"kb6", "x":18.75, "y":5.5}, {"label":"kb7", "x":19.75, "y":5.5}
       ]
     },
     "LAYOUT_4u_space": {
       "key_count": 124,
       "layout": [
-        {"label":"k00", "x":0, "y":0},
-        {"label":"k01", "x":1, "y":0},
-        {"label":"k02", "x":2, "y":0},
-        {"label":"k03", "x":3, "y":0},
-        {"label":"k04", "x":4.75, "y":0},
-        {"label":"k06", "x":6.25, "y":0},
-        {"label":"k07", "x":7.25, "y":0},
-        {"label":"k08", "x":8.25, "y":0},
-        {"label":"k09", "x":9.25, "y":0},
-        {"label":"k0a", "x":10.75, "y":0},
-        {"label":"k60", "x":11.75, "y":0},
-        {"label":"k61", "x":12.75, "y":0},
-        {"label":"k62", "x":13.75, "y":0},
-        {"label":"k63", "x":15.25, "y":0},
-        {"label":"k64", "x":16.25, "y":0},
-        {"label":"k65", "x":17.25, "y":0},
-        {"label":"k66", "x":18.25, "y":0},
-        {"label":"k67", "x":20, "y":0},
-        {"label":"k68", "x":21, "y":0},
-        {"label":"k69", "x":22, "y":0},
-        {"label":"k6a", "x":23, "y":0},
-        {"label":"k10", "x":0, "y":1.25},
-        {"label":"k11", "x":1, "y":1.25},
-        {"label":"k12", "x":2, "y":1.25},
-        {"label":"k13", "x":3, "y":1.25},
-        {"label":"k14", "x":4.5, "y":1.25},
-        {"label":"k15", "x":5.5, "y":1.25},
-        {"label":"k16", "x":6.5, "y":1.25},
-        {"label":"k17", "x":7.5, "y":1.25},
-        {"label":"k18", "x":8.5, "y":1.25},
-        {"label":"k19", "x":9.5, "y":1.25},
-        {"label":"k0a", "x":10.5, "y":1.25},
-        {"label":"k70", "x":11.5, "y":1.25},
-        {"label":"k71", "x":12.5, "y":1.25},
-        {"label":"k72", "x":13.5, "y":1.25},
-        {"label":"k73", "x":14.5, "y":1.25},
-        {"label":"k74", "x":15.5, "y":1.25},
-        {"label":"k75", "x":16.5, "y":1.25},
-        {"label":"k76", "x":17.5, "y":1.25, "w":2},
-        {"label":"k77", "x":20, "y":1.25},
-        {"label":"k78", "x":21, "y":1.25},
-        {"label":"k79", "x":22, "y":1.25},
-        {"label":"k7a", "x":23, "y":1.25},
-        {"label":"k20", "x":0, "y":2.25, "h":2},
-        {"label":"k21", "x":1, "y":2.25},
-        {"label":"k22", "x":2, "y":2.25},
-        {"label":"k23", "x":3, "y":2.25},
-        {"label":"k24", "x":4.5, "y":2.25, "w":1.5},
-        {"label":"k25", "x":6, "y":2.25},
-        {"label":"k26", "x":7, "y":2.25},
-        {"label":"k27", "x":8, "y":2.25},
-        {"label":"k28", "x":9, "y":2.25},
-        {"label":"k29", "x":10, "y":2.25},
-        {"label":"k2a", "x":11, "y":2.25},
-        {"label":"k80", "x":12, "y":2.25},
-        {"label":"k81", "x":13, "y":2.25},
-        {"label":"k82", "x":14, "y":2.25},
-        {"label":"k83", "x":15, "y":2.25},
-        {"label":"k84", "x":16, "y":2.25},
-        {"label":"k85", "x":17, "y":2.25},
-        {"label":"k86", "x":18, "y":2.25, "w":1.5},
-        {"label":"k87", "x":20, "y":2.25},
-        {"label":"k88", "x":21, "y":2.25},
-        {"label":"k89", "x":22, "y":2.25},
-        {"label":"k8a", "x":23, "y":2.25, "h":2},
-        {"label":"k31", "x":1, "y":3.25},
-        {"label":"k32", "x":2, "y":3.25},
-        {"label":"k33", "x":3, "y":3.25},
-        {"label":"k34", "x":4.5, "y":3.25, "w":1.75},
-        {"label":"k35", "x":6.25, "y":3.25},
-        {"label":"k36", "x":7.25, "y":3.25},
-        {"label":"k37", "x":8.25, "y":3.25},
-        {"label":"k38", "x":9.25, "y":3.25},
-        {"label":"k39", "x":10.25, "y":3.25},
-        {"label":"k3a", "x":11.25, "y":3.25},
-        {"label":"k90", "x":12.25, "y":3.25},
-        {"label":"k91", "x":13.25, "y":3.25},
-        {"label":"k92", "x":14.25, "y":3.25},
-        {"label":"k93", "x":15.25, "y":3.25},
-        {"label":"k94", "x":16.25, "y":3.25},
-        {"label":"k95", "x":17.25, "y":3.25, "w":2.25},
-        {"label":"k97", "x":20, "y":3.25},
-        {"label":"k98", "x":21, "y":3.25},
-        {"label":"k99", "x":22, "y":3.25},
-        {"label":"k40", "x":0, "y":4.25, "h":2},
-        {"label":"k41", "x":1, "y":4.25},
-        {"label":"k42", "x":2, "y":4.25},
-        {"label":"k43", "x":3, "y":4.25},
-        {"label":"k45", "x":5.5, "y":4.25, "w":1.25},
-        {"label":"k46", "x":6.75, "y":4.25},
-        {"label":"k47", "x":7.75, "y":4.25},
-        {"label":"k48", "x":8.75, "y":4.25},
-        {"label":"k49", "x":9.75, "y":4.25},
-        {"label":"k4a", "x":10.75, "y":4.25},
-        {"label":"ka0", "x":11.75, "y":4.25},
-        {"label":"ka1", "x":12.75, "y":4.25},
-        {"label":"ka2", "x":13.75, "y":4.25},
-        {"label":"ka3", "x":14.75, "y":4.25},
-        {"label":"ka4", "x":15.75, "y":4.25},
-        {"label":"ka5", "x":16.75, "y":4.25, "w":1.75},
-        {"label":"ka7", "x":20, "y":4.25},
-        {"label":"ka8", "x":21, "y":4.25},
-        {"label":"ka9", "x":22, "y":4.25},
-        {"label":"kaa", "x":23, "y":4.25, "h":2},
-        {"label":"k44", "x":4.25, "y":4.5},
-        {"label":"k96", "x":18.75, "y":4.5},
-        {"label":"k51", "x":1, "y":5.25},
-        {"label":"k52", "x":2, "y":5.25},
-        {"label":"k56", "x":6.5, "y":5.25},
-        {"label":"k57", "x":7.5, "y":5.25},
-        {"label":"k58", "x":8.5, "y":5.25},
-        {"label":"kb0", "x":9.5, "y":5.25, "w":4},
-        {"label":"kb2", "x":13.5, "y":5.25},
-        {"label":"kb3", "x":14.5, "y":5.25},
-        {"label":"kb4", "x":15.5, "y":5.25},
-        {"label":"kb5", "x":16.5, "y":5.25},
-        {"label":"kb8", "x":21, "y":5.25},
-        {"label":"kb9", "x":22, "y":5.25},
-        {"label":"k53", "x":3.25, "y":5.5},
-        {"label":"k54", "x":4.25, "y":5.5},
-        {"label":"k55", "x":5.25, "y":5.5},
-        {"label":"ka6", "x":17.75, "y":5.5},
-        {"label":"kb6", "x":18.75, "y":5.5},
-        {"label":"kb7", "x":19.75, "y":5.5}
+        {"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k04", "x":4.75, "y":0}, {"label":"k06", "x":6.25, "y":0}, {"label":"k07", "x":7.25, "y":0}, {"label":"k08", "x":8.25, "y":0}, {"label":"k09", "x":9.25, "y":0}, {"label":"k0a", "x":10.75, "y":0}, {"label":"k60", "x":11.75, "y":0}, {"label":"k61", "x":12.75, "y":0}, {"label":"k62", "x":13.75, "y":0}, {"label":"k63", "x":15.25, "y":0}, {"label":"k64", "x":16.25, "y":0}, {"label":"k65", "x":17.25, "y":0}, {"label":"k66", "x":18.25, "y":0}, {"label":"k67", "x":20, "y":0}, {"label":"k68", "x":21, "y":0}, {"label":"k69", "x":22, "y":0}, {"label":"k6a", "x":23, "y":0},
+        {"label":"k10", "x":0, "y":1.25}, {"label":"k11", "x":1, "y":1.25}, {"label":"k12", "x":2, "y":1.25}, {"label":"k13", "x":3, "y":1.25}, {"label":"k14", "x":4.5, "y":1.25}, {"label":"k15", "x":5.5, "y":1.25}, {"label":"k16", "x":6.5, "y":1.25}, {"label":"k17", "x":7.5, "y":1.25}, {"label":"k18", "x":8.5, "y":1.25}, {"label":"k19", "x":9.5, "y":1.25}, {"label":"k0a", "x":10.5, "y":1.25}, {"label":"k70", "x":11.5, "y":1.25}, {"label":"k71", "x":12.5, "y":1.25}, {"label":"k72", "x":13.5, "y":1.25}, {"label":"k73", "x":14.5, "y":1.25}, {"label":"k74", "x":15.5, "y":1.25}, {"label":"k75", "x":16.5, "y":1.25}, {"label":"k76", "x":17.5, "y":1.25, "w":2}, {"label":"k77", "x":20, "y":1.25}, {"label":"k78", "x":21, "y":1.25}, {"label":"k79", "x":22, "y":1.25}, {"label":"k7a", "x":23, "y":1.25},
+        {"label":"k20", "x":0, "y":2.25, "h":2}, {"label":"k21", "x":1, "y":2.25}, {"label":"k22", "x":2, "y":2.25}, {"label":"k23", "x":3, "y":2.25}, {"label":"k24", "x":4.5, "y":2.25, "w":1.5}, {"label":"k25", "x":6, "y":2.25}, {"label":"k26", "x":7, "y":2.25}, {"label":"k27", "x":8, "y":2.25}, {"label":"k28", "x":9, "y":2.25}, {"label":"k29", "x":10, "y":2.25}, {"label":"k2a", "x":11, "y":2.25}, {"label":"k80", "x":12, "y":2.25}, {"label":"k81", "x":13, "y":2.25}, {"label":"k82", "x":14, "y":2.25}, {"label":"k83", "x":15, "y":2.25}, {"label":"k84", "x":16, "y":2.25}, {"label":"k85", "x":17, "y":2.25}, {"label":"k86", "x":18, "y":2.25, "w":1.5}, {"label":"k87", "x":20, "y":2.25}, {"label":"k88", "x":21, "y":2.25}, {"label":"k89", "x":22, "y":2.25}, {"label":"k8a", "x":23, "y":2.25, "h":2},
+        {"label":"k31", "x":1, "y":3.25}, {"label":"k32", "x":2, "y":3.25}, {"label":"k33", "x":3, "y":3.25}, {"label":"k34", "x":4.5, "y":3.25, "w":1.75}, {"label":"k35", "x":6.25, "y":3.25}, {"label":"k36", "x":7.25, "y":3.25}, {"label":"k37", "x":8.25, "y":3.25}, {"label":"k38", "x":9.25, "y":3.25}, {"label":"k39", "x":10.25, "y":3.25}, {"label":"k3a", "x":11.25, "y":3.25}, {"label":"k90", "x":12.25, "y":3.25}, {"label":"k91", "x":13.25, "y":3.25}, {"label":"k92", "x":14.25, "y":3.25}, {"label":"k93", "x":15.25, "y":3.25}, {"label":"k94", "x":16.25, "y":3.25}, {"label":"k95", "x":17.25, "y":3.25, "w":2.25}, {"label":"k97", "x":20, "y":3.25}, {"label":"k98", "x":21, "y":3.25}, {"label":"k99", "x":22, "y":3.25},
+        {"label":"k40", "x":0, "y":4.25, "h":2}, {"label":"k41", "x":1, "y":4.25}, {"label":"k42", "x":2, "y":4.25}, {"label":"k43", "x":3, "y":4.25}, {"label":"k45", "x":5.5, "y":4.25, "w":1.25}, {"label":"k46", "x":6.75, "y":4.25}, {"label":"k47", "x":7.75, "y":4.25}, {"label":"k48", "x":8.75, "y":4.25}, {"label":"k49", "x":9.75, "y":4.25}, {"label":"k4a", "x":10.75, "y":4.25}, {"label":"ka0", "x":11.75, "y":4.25}, {"label":"ka1", "x":12.75, "y":4.25}, {"label":"ka2", "x":13.75, "y":4.25}, {"label":"ka3", "x":14.75, "y":4.25}, {"label":"ka4", "x":15.75, "y":4.25}, {"label":"ka5", "x":16.75, "y":4.25, "w":1.75}, {"label":"ka7", "x":20, "y":4.25}, {"label":"ka8", "x":21, "y":4.25}, {"label":"ka9", "x":22, "y":4.25}, {"label":"kaa", "x":23, "y":4.25, "h":2}, {"label":"k44", "x":4.25, "y":4.5}, {"label":"k96", "x":18.75, "y":4.5},
+        {"label":"k51", "x":1, "y":5.25}, {"label":"k52", "x":2, "y":5.25}, {"label":"k56", "x":6.5, "y":5.25}, {"label":"k57", "x":7.5, "y":5.25}, {"label":"k58", "x":8.5, "y":5.25}, {"label":"kb0", "x":9.5, "y":5.25, "w":4}, {"label":"kb2", "x":13.5, "y":5.25}, {"label":"kb3", "x":14.5, "y":5.25}, {"label":"kb4", "x":15.5, "y":5.25}, {"label":"kb5", "x":16.5, "y":5.25}, {"label":"kb8", "x":21, "y":5.25}, {"label":"kb9", "x":22, "y":5.25}, {"label":"k53", "x":3.25, "y":5.5}, {"label":"k54", "x":4.25, "y":5.5}, {"label":"k55", "x":5.25, "y":5.5}, {"label":"ka6", "x":17.75, "y":5.5}, {"label":"kb6", "x":18.75, "y":5.5}, {"label":"kb7", "x":19.75, "y":5.5}
       ]
     }
   }

keyboards/clueboard/2x1800/keymaps/default/config.h

@@ -14,11 +14,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
 
 #include "config_common.h"
 
 // place overrides here
-
-#endif

keyboards/clueboard/2x1800/keymaps/default_4u/config.h

@@ -14,11 +14,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
 
 #include "config_common.h"
 
 // place overrides here
-
-#endif

keyboards/clueboard/2x1800/keymaps/default_7u/config.h

@@ -14,11 +14,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
 
 #include "config_common.h"
 
 // place overrides here
-
-#endif

keyboards/clueboard/2x1800/keymaps/macroboard/config.h

@@ -14,11 +14,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
 
 #include "config_common.h"
 
 // place overrides here
-
-#endif

keyboards/clueboard/2x1800/keymaps/mouseboard_left/config.h

@@ -14,11 +14,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
+#pragma once
 
 #include "config_common.h"
 
 // place overrides here
-
-#endif

keyboards/clueboard/2x1800/keymaps/mouseboard_left/rules.mk

@@ -1 +0,0 @@
-MOUSEKEY_ENABLE = yes