[Core] Add short form LTO_ENABLE (#7259)

For drashna's sanity's sake

docs/config_options.md

@@ -348,7 +348,8 @@ Use these to enable or disable building certain features. The more you have enab
 * `NO_USB_STARTUP_CHECK`
   * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master.
 * `LINK_TIME_OPTIMIZATION_ENABLE`
-  = Enables Link Time Optimization (`LTO`) when compiling the keyboard.  This makes the process take longer, but can significantly reduce the compiled size (and since the firmware is small, the added time is not noticable).  However, this will automatically disable the old Macros and Functions features automatically, as these break when `LTO` is enabled.  It does this by automatically defining `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION`
+  * Enables Link Time Optimization (`LTO`) when compiling the keyboard.  This makes the process take longer, but can significantly reduce the compiled size (and since the firmware is small, the added time is not noticeable).  However, this will automatically disable the old Macros and Functions features automatically, as these break when `LTO` is enabled.  It does this by automatically defining `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION`
+  * Alternatively, you can use `LTO_ENABLE` instead of `LINK_TIME_OPTIMIZATION_ENABLE`. 
 
 ## USB Endpoint Limitations
 

docs/ru-ru/getting_started_getting_help.md

@@ -0,0 +1,15 @@
+# Получение помощи
+
+Существует много ресурсов для получения помощи по работе с QMK.
+
+## Чат в реальном времени
+
+Вы можете найти разработчиков и пользователей QMK на нашем главном [сервере Discord](https://discord.gg/Uq7gcHh). На сервере есть специальные каналы для разговоров о прошивке, Toolbox, оборудовании и конфигураторе.
+
+## OLKB Сабреддит
+
+Официальный форум QMK [/r/olkb](https://reddit.com/r/olkb) на [reddit.com](https://reddit.com).
+
+## GitHub ишью
+
+Вы можете открыть [ишью на GitHub](https://github.com/qmk/qmk_firmware/issues). Это особенно удобно, когда ваша проблема потребует длительного обсуждения или отладки.

keyboards/bfake/bfake.c

@@ -16,51 +16,34 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "bfake.h"
-#ifdef BACKLIGHT_ENABLE
-#include "backlight.h"
-#endif
-#ifdef RGBLIGHT_ENABLE
-#include "rgblight.h"
-#endif
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-#endif
 
 __attribute__ ((weak))
-void matrix_scan_user(void) {
-}
+void matrix_scan_user(void) {}
 
 void backlight_init_ports(void) {
-	DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
-	PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+	setPinOutput(D0);
+	setPinOutput(D1);
+	setPinOutput(D4);
+	setPinOutput(D6);
+
+	writePinLow(D0);
+	writePinLow(D1);
+	writePinLow(D4);
+	writePinLow(D6);
 }
 
 void backlight_set(uint8_t level) {
 	if (level == 0) {
 		// Turn out the lights
-		PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+		writePinLow(D0);
+		writePinLow(D1);
+		writePinLow(D4);
+		writePinLow(D6);
 	} else {
 		// Turn on the lights
-		PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
+		writePinHigh(D0);
+		writePinHigh(D1);
+		writePinHigh(D4);
+		writePinHigh(D6);
 	}
 }

keyboards/bfake/i2c.c

@@ -1,106 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file 
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}

keyboards/bfake/i2c.h

@@ -1,27 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file 
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif

keyboards/bfake/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,10 +19,10 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = no
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c
+SRC = matrix.c

keyboards/jc65/v32a/i2c.c

@@ -1,106 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file 
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}

keyboards/jc65/v32a/i2c.h

@@ -1,27 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file 
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif

keyboards/jc65/v32a/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,10 +19,10 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c
+SRC = matrix.c

keyboards/jc65/v32a/v32a.c

@@ -16,56 +16,36 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "v32a.h"
-#ifdef BACKLIGHT_ENABLE
-#include "backlight.h"
-#endif
-#ifdef RGBLIGHT_ENABLE
-#include "rgblight.h"
-#endif
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-#endif
 
 __attribute__ ((weak))
-void matrix_scan_user(void) {
-#ifdef RGBLIGHT_ENABLE
-  rgblight_task();
-#endif
-}
+void matrix_scan_user(void) {}
 
 #ifdef BACKLIGHT_ENABLE
 void backlight_init_ports(void) {
-	DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
-	PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+	setPinOutput(D0);
+	setPinOutput(D1);
+	setPinOutput(D4);
+	setPinOutput(D6);
+
+	writePinLow(D0);
+	writePinLow(D1);
+	writePinLow(D4);
+	writePinLow(D6);
 }
 
 void backlight_set(uint8_t level) {
 	if (level == 0) {
 		// Turn out the lights
-		PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+		writePinLow(D0);
+		writePinLow(D1);
+		writePinLow(D4);
+		writePinLow(D6);
 	} else {
 		// Turn on the lights
-		PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
+		writePinHigh(D0);
+		writePinHigh(D1);
+		writePinHigh(D4);
+		writePinHigh(D6);
 	}
 }
 #endif

keyboards/jj50/i2c.c

@@ -1,104 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}

keyboards/jj50/i2c.h

@@ -1,25 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif

keyboards/jj50/jj50.c

@@ -17,24 +17,20 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "jj50.h"
 
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
-
 #include "backlight.h"
 #include "backlight_custom.h"
 
-// for keyboard subdirectory level init functions
-// @Override
-void matrix_init_kb(void) {
-    // call user level keymaps, if any
-    matrix_init_user();
-}
+void matrix_init_kb(void) { matrix_init_user(); }
+
+__attribute__ ((weak))
+void matrix_init_user(void) {}
+
+void matrix_scan_kb(void) { matrix_scan_user(); }
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {}
 
 #ifdef BACKLIGHT_ENABLE
-/// Overrides functions in `quantum.c`
 void backlight_init_ports(void) {
     b_led_init_ports();
 }
@@ -47,48 +43,3 @@ void backlight_set(uint8_t level) {
     b_led_set(level);
 }
 #endif
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-// custom RGB driver
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i=0; i<RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-    
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-    // if LEDs were previously on before poweroff, turn them back on
-    if (rgb_init == false && rgblight_config.enable) {
-        i2c_init();
-        i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-        rgb_init = true;
-    }
-    
-    rgblight_task();
-#else
-    void matrix_scan_kb(void) {
-#endif
-        matrix_scan_user();
-        /* Nothing else for now. */
-    }
-    
-    __attribute__((weak)) // overridable
-    void matrix_init_user(void) {
-        
-    }
-    
-    __attribute__((weak)) // overridable
-    void matrix_scan_user(void) {
-        
-    }

keyboards/jj50/rules.mk

@@ -1,19 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-# Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com>
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -35,22 +19,18 @@ CONSOLE_ENABLE = no
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 NKRO_ENABLE = no
 # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 
-
-DISABLE_WS2812 = no
-
 KEY_LOCK_ENABLE = yes
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
-
 #OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c backlight.c
+SRC = matrix.c backlight.c
 
 LAYOUTS = ortho_5x12

keyboards/keebio/iris/keymaps/jerryhcooke/config.h

@@ -1,5 +1,5 @@
 /*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
+Copyright 2017 Danny Nguyen <danny@keeb.io>
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -15,11 +15,21 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-// Please do not modify this file 
-
 #pragma once
 
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
+// #define USE_I2C
+#define EE_HANDS
 
+#undef RGBLED_NUM
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 12
+#define RGBLIGHT_HUE_STEP 2
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+#ifndef NO_DEBUG
+#    define NO_DEBUG
+#endif  // !NO_DEBUG
+#if !defined(NO_PRINT) && !defined(CONSOLE_ENABLE)
+#    define NO_PRINT
+#endif  // !NO_PRINT

keyboards/keebio/iris/keymaps/jerryhcooke/keymap.c

@@ -0,0 +1,39 @@
+#include QMK_KEYBOARD_H
+
+#define _QWERTY 0
+#define _LOWER 1
+#define _RAISE 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {[0] = LAYOUT(KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, KC_BSPC, KC_A, KC_R, KC_S, KC_T, KC_G, KC_M, KC_N, KC_E, KC_I, KC_O, KC_ENT, LCTL_T(KC_LGUI), KC_Z, KC_X, KC_C, KC_D, KC_V, LGUI(KC_L), MEH_T(KC_MINS), KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, KC_LGUI, LT(1, KC_QUOT), KC_SFTENT, KC_SPC, LT(2, KC_BSLS), LALT_T(KC_APP)),
+                                                              [1] = LAYOUT(KC_MPLY, KC_NO, KC_DQUO, KC_NO, LALT(KC_F4), KC_NO, KC_P7, KC_P8, KC_P9, KC_PMNS, KC_NO, RESET, KC_MPRV, KC_END, KC_UP, KC_HOME, KC_PGUP, KC_NO, KC_P4, KC_P5, KC_P6, KC_PPLS, RGB_SAI, RGB_SAD, KC_MNXT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_NO, KC_P1, KC_P2, KC_P3, KC_PAST, RGB_HUI, RGB_HUD, KC_NO, KC_WBAK, KC_WFWD, KC_WSTP, KC_WREF, KC_NO, LCA(KC_DEL), KC_NLCK, KC_P0, KC_P0, KC_PDOT, KC_PENT, RGB_SPI, RGB_SPD, KC_PSCR, KC_NO, KC_LGUI, RGB_TOG, RGB_VAI, RGB_VAD),
+                                                              [2] = LAYOUT(KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_NO, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_K, KC_NO, KC_WH_D, KC_MS_U, KC_WH_U, KC_NO, KC_F12, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO)};
+
+#ifdef ENCODER_ENABLE
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        switch (biton32(layer_state)) {
+            case _LOWER:
+                clockwise ? tap_code(KC_MS_WH_UP) : tap_code(KC_MS_WH_DOWN);
+                break;
+            case _RAISE:
+                clockwise ? rgblight_increase_hue() : rgblight_decrease_hue();
+                break;
+            default:
+                clockwise ? tap_code(KC_AUDIO_VOL_UP) : tap_code(KC_AUDIO_VOL_DOWN);
+                break;
+        }
+    } else if (index == 1) {
+        switch (biton32(layer_state)) {
+            case _LOWER:
+                clockwise ? tap_code(KC_UP) : tap_code(KC_DOWN);
+                break;
+            case _RAISE:
+                clockwise ? tap_code(KC_MEDIA_NEXT_TRACK) : tap_code(KC_MEDIA_PREV_TRACK);
+                break;
+            default:
+                clockwise ? tap_code(KC_RIGHT) : tap_code(KC_LEFT);
+                break;
+        }
+    }
+}
+#endif  // ENCODER_ENABLE

keyboards/keebio/iris/keymaps/jerryhcooke/readme.md

@@ -0,0 +1,3 @@
+[Jerry's Iris R4 Layout](https://imgur.com/a/JLytcqS)
+
+This is a fairly modified version of the default keymap that I tinkered with to allow the rotary encoder to carry out a different function on each layer.

keyboards/keebio/iris/keymaps/jerryhcooke/rules.mk

@@ -0,0 +1,3 @@
+RGBLIGHT_ENABLE = yes 
+BACKLIGHT_ENABLE = yes 
+MOUSEKEY_ENABLE = yes

keyboards/kyria/config.h

@@ -1,25 +1,18 @@
 /*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
+Copyright 2019 Thomas Baart <thomas@splitkb.com>
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 2 of the License, or
 (at your option) any later version.
-
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.
-
 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-// Please do not modify this file 
-
 #pragma once
 
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
+#include "config_common.h"
 

keyboards/kyria/info.json

@@ -0,0 +1,23 @@
+{
+        "keyboard_name": "Kyria", 
+        "url": "https://splitkb.com", 
+        "maintainer": "splitkb.com", 
+        "width": 16.5, 
+        "height": 5.5, 
+        "layouts": {
+            "LAYOUT": {
+                "layout": [
+                        {"x":3, "y":0.25}, {"x":12.5, "y":0.25}, {"x":2, "y":0.5}, {"x":4, "y":0.5}, {"x":11.5, "y":0.5},
+                        {"x":13.5, "y":0.5}, {"x":5, "y":0.75}, {"x":10.5, "y":0.75}, {"x":0, "y":1}, {"x":1, "y":1},
+                        {"x":14.5, "y":1}, {"x":15.5, "y":1}, {"x":3, "y":1.25}, {"x":12.5, "y":1.25}, {"x":2, "y":1.5},  
+                        {"x":4, "y":1.5}, {"x":11.5, "y":1.5}, {"x":13.5, "y":1.5}, {"x":5, "y":1.75}, {"x":10.5, "y":1.75},
+                        {"x":0, "y":2}, {"x":1, "y":2}, {"x":14.5, "y":2}, {"x":15.5, "y":2}, {"x":3, "y":2.25},
+                        {"x":12.5, "y":2.25}, {"x":2, "y":2.5}, {"x":4, "y":2.5}, {"x":11.5, "y":2.5}, {"x":13.5, "y":2.5},
+                        {"x":5, "y":2.75}, {"x":10.5, "y":2.75}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":14.5, "y":3},
+                        {"x":15.5, "y":3}, {"x":6, "y":3.25}, {"x":9.5, "y":3.25}, {"x":2.5, "y":3.5}, {"x":3.5, "y":3.5},
+                        {"x":7, "y":3.5}, {"x":8.5, "y":3.5}, {"x":12, "y":3.5}, {"x":13, "y":3.5}, {"x":4.5, "y":3.75},
+                        {"x":11, "y":3.75}, {"x":5.5, "y":4.25}, {"x":10, "y":4.25}, {"x":6.5, "y":4.5}, {"x":9, "y":4.5}
+                ]
+            }
+        }
+    }

keyboards/kyria/keymaps/default/config.h

@@ -0,0 +1,32 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#ifdef OLED_DRIVER_ENABLE
+  #define OLED_DISPLAY_128X64
+#endif
+
+#ifdef RGBLIGHT_ENABLE
+  #define RGBLIGHT_ANIMATIONS
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+#endif
+
+// If you are using an Elite C rev3 on the slave side, uncomment the lines below:
+// #define SPLIT_USB_DETECT
+// #define NO_USB_STARTUP_CHECK

keyboards/kyria/keymaps/default/keymap.c

@@ -0,0 +1,219 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum layers {
+    _QWERTY = 0,
+    _LOWER,
+    _RAISE,
+    _ADJUST
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* 
+ * Base Layer: QWERTY
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |RAIS/ESC|   Q  |   W  |   E  |   R  |   T  |                              |   Y  |   U  |   I  |   O  |   P  |  | \   |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |Ctrl/BS |   A  |   S  |  D   |   F  |   G  |                              |   H  |   J  |   K  |   L  | ;  : |  ' "   |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * | LShift |   Z  |   X  |   C  |   V  |   B  |LShift|LShift|  |LShift|LShift|   N  |   M  | ,  < | . >  | /  ? |  - _   |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        | GUI  | Del  | Enter| Space| Esc  |  | Enter| Space| Tab  | Bksp | AltGr|
+ *                        |      |      | Alt  | Lower| Raise|  | Lower| Raise|      |      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [_QWERTY] = LAYOUT(
+      LT(_RAISE, KC_ESC),       KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,                                         KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_PIPE,
+      MT(MOD_LCTL, KC_BSPC),   KC_A,   KC_S,   KC_D,   KC_F,   KC_G,                                         KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+      KC_LSFT,                 KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_LSFT,   KC_LSFT, KC_LSFT, KC_LSFT, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_MINS,
+              KC_LGUI, KC_DEL, MT(MOD_LALT, KC_ENT), LT(_LOWER, KC_SPC), LT(_RAISE, KC_ESC), LT(_LOWER, KC_ENT), LT(_RAISE, KC_SPC), KC_TAB,  KC_BSPC, KC_RALT
+    ),
+/*
+ * Lower Layer: Symbols
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        |  !   |  @   |  {   |  }   |  |   |                              |      |      |      |      |      |  | \   |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        |  #   |  $   |  (   |  )   |  `   |                              |   +  |  -   |  /   |  *   |  %   |  ' "   |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        |  %   |  ^   |  [   |  ]   |  ~   |      |      |  |      |      |   &  |  =   |  ,   |  .   |  / ? | - _    |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |  ;   |  =   |  |  =   |  ;   |      |      |      |
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [_LOWER] = LAYOUT(
+      _______, KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_PIPE,                                     _______, _______, _______, _______, _______, KC_BSLS,
+      _______, KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN, KC_GRV,                                      KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_PERC, KC_QUOT,
+      _______, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, _______, _______, _______, _______, KC_AMPR, KC_EQL,  KC_COMM, KC_DOT,  KC_SLSH, KC_MINS,
+                                 _______, _______, _______, KC_SCLN, KC_EQL,  KC_EQL,  KC_SCLN, _______, _______, _______
+    ),
+/*
+ * Raise Layer: Number keys, media, navigation
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        |   1  |  2   |  3   |  4   |  5   |                              |  6   |  7   |  8   |  9   |  0   |        |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        |      | Prev | Play | Next | VolUp|                              | Left | Down | Up   | Right|      |        |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        |      |      |      | Mute | VolDn|      |      |  |      |      | MLeft| Mdown| MUp  |MRight|      |        |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [_RAISE] = LAYOUT(
+      _______, KC_1, 	  KC_2,    KC_3,    KC_4,    KC_5,                                        KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
+      _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLU,                                     KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______,
+      _______, _______, _______, _______, KC_MUTE, KC_VOLD, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, _______, _______,
+                                 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+/*
+ * Adjust Layer: Function keys, RGB
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        | F1   |  F2  | F3   | F4   | F5   |                              | F6   | F7   |  F8  | F9   | F10  |        |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        | TOG  | SAI  | HUI  | VAI  | MOD  |                              |      |      |      | F11  | F12  |        |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        |      | SAD  | HUD  | VAD  | RMOD |      |      |  |      |      |      |      |      |      |      |        |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [_ADJUST] = LAYOUT(
+      _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                                       KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______,
+      _______, RGB_TOG, RGB_SAI, RGB_HUI, RGB_VAI, RGB_MOD,                                     _______, _______, _______, KC_F11,  KC_F12,  _______,
+      _______, _______, RGB_SAD, RGB_HUD, RGB_VAD, RGB_RMOD,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+                                 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+// /*
+//  * Layer template
+//  *
+//  * ,-------------------------------------------.                              ,-------------------------------------------.
+//  * |        |      |      |      |      |      |                              |      |      |      |      |      |        |
+//  * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+//  * |        |      |      |      |      |      |                              |      |      |      |      |      |        |
+//  * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+//  * |        |      |      |      |      |      |      |      |  |      |      |      |      |      |      |      |        |
+//  * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+//  *                        |      |      |      |      |      |  |      |      |      |      |      |
+//  *                        |      |      |      |      |      |  |      |      |      |      |      |
+//  *                        `----------------------------------'  `----------------------------------'
+//  */
+//     [_LAYERINDEX] = LAYOUT(
+//       _______, _______, _______, _______, _______, _______,                                     _______, _______, _______, _______, _______, _______,
+//       _______, _______, _______, _______, _______, _______,                                     _______, _______, _______, _______, _______, _______,
+//       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+//                                  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+//     ),
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+}
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+	return OLED_ROTATION_180;
+}
+
+static void render_kyria_logo(void) {
+    static const char PROGMEM kyria_logo[] = {
+        0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,128,128,192,224,240,112,120, 56, 60, 28, 30, 14, 14, 14,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7, 14, 14, 14, 30, 28, 60, 56,120,112,240,224,192,128,128,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,192,224,240,124, 62, 31, 15,  7,  3,  1,128,192,224,240,120, 56, 60, 28, 30, 14, 14,  7,  7,135,231,127, 31,255,255, 31,127,231,135,  7,  7, 14, 14, 30, 28, 60, 56,120,240,224,192,128,  1,  3,  7, 15, 31, 62,124,240,224,192,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,240,252,255, 31,  7,  1,  0,  0,192,240,252,254,255,247,243,177,176, 48, 48, 48, 48, 48, 48, 48,120,254,135,  1,  0,  0,255,255,  0,  0,  1,135,254,120, 48, 48, 48, 48, 48, 48, 48,176,177,243,247,255,254,252,240,192,  0,  0,  1,  7, 31,255,252,240,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,255,255,255,  0,  0,  0,  0,  0,254,255,255,  1,  1,  7, 30,120,225,129,131,131,134,134,140,140,152,152,177,183,254,248,224,255,255,224,248,254,183,177,152,152,140,140,134,134,131,131,129,225,120, 30,  7,  1,  1,255,255,254,  0,  0,  0,  0,  0,255,255,255,  0,  0,  0,  0,255,255,  0,  0,192,192, 48, 48,  0,  0,240,240,  0,  0,  0,  0,  0,  0,240,240,  0,  0,240,240,192,192, 48, 48, 48, 48,192,192,  0,  0, 48, 48,243,243,  0,  0,  0,  0,  0,  0, 48, 48, 48, 48, 48, 48,192,192,  0,  0,  0,  0,  0,
+        0,  0,  0,255,255,255,  0,  0,  0,  0,  0,127,255,255,128,128,224,120, 30,135,129,193,193, 97, 97, 49, 49, 25, 25,141,237,127, 31,  7,255,255,  7, 31,127,237,141, 25, 25, 49, 49, 97, 97,193,193,129,135, 30,120,224,128,128,255,255,127,  0,  0,  0,  0,  0,255,255,255,  0,  0,  0,  0, 63, 63,  3,  3, 12, 12, 48, 48,  0,  0,  0,  0, 51, 51, 51, 51, 51, 51, 15, 15,  0,  0, 63, 63,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 48, 48, 63, 63, 48, 48,  0,  0, 12, 12, 51, 51, 51, 51, 51, 51, 63, 63,  0,  0,  0,  0,  0,
+        0,  0,  0,  0, 15, 63,255,248,224,128,  0,  0,  3, 15, 63,127,255,239,207,141, 13, 12, 12, 12, 12, 12, 12, 12, 30,127,225,128,  0,  0,255,255,  0,  0,128,225,127, 30, 12, 12, 12, 12, 12, 12, 12, 13,141,207,239,255,127, 63, 15,  3,  0,  0,128,224,248,255, 63, 15,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,  3,  7, 15, 62,124,248,240,224,192,128,  1,  3,  7, 15, 30, 28, 60, 56,120,112,112,224,224,225,231,254,248,255,255,248,254,231,225,224,224,112,112,120, 56, 60, 28, 30, 15,  7,  3,  1,128,192,224,240,248,124, 62, 15,  7,  3,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  3,  7, 15, 14, 30, 28, 60, 56,120,112,112,112,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,112,112,112,120, 56, 60, 28, 30, 14, 15,  7,  3,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0
+    };
+    oled_write_raw_P(kyria_logo, sizeof(kyria_logo));
+}
+
+static void render_qmk_logo(void) {
+  static const char PROGMEM qmk_logo[] = {
+    0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+    0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+    0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
+
+  oled_write_P(qmk_logo, false);
+}
+
+static void render_status(void) {
+    // QMK Logo and version information
+    render_qmk_logo();
+    oled_write_P(PSTR("Kyria rev1.0\n\n"), false);
+
+    // Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+    switch (get_highest_layer(layer_state)) {
+        case _QWERTY:
+            oled_write_P(PSTR("Default\n"), false);
+            break;
+        case _LOWER:
+            oled_write_P(PSTR("Lower\n"), false);
+            break;
+        case _RAISE:
+            oled_write_P(PSTR("Raise\n"), false);
+            break;
+        case _ADJUST:
+            oled_write_P(PSTR("Adjust\n"), false);
+            break;
+        default:
+            oled_write_P(PSTR("Undefined\n"), false);
+    }
+
+    // Host Keyboard LED Status
+    uint8_t led_usb_state = host_keyboard_leds();
+    oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR("       "), false);
+    oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR("       "), false);
+    oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR("       "), false);
+}
+
+void oled_task_user(void) {
+    if (is_keyboard_master()) {
+        render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_kyria_logo();
+    }
+}
+#endif
+
+#ifdef ENCODER_ENABLE
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        // Volume control
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+    }
+    else if (index == 1) {
+        // Page up/Page down
+        if (clockwise) {
+            tap_code(KC_PGDN);
+        } else {
+            tap_code(KC_PGUP);
+        }
+    }
+}
+#endif

keyboards/kyria/keymaps/default/rules.mk

@@ -0,0 +1,3 @@
+OLED_DRIVER_ENABLE = yes   # Enables the use of OLED displays
+ENCODER_ENABLE = yes       # ENables the use of one or more encoders
+RGBLIGHT_ENABLE = yes      # Enable keyboard RGB underglow

keyboards/kyria/keymaps/thomasbaart/config.h

@@ -0,0 +1,47 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#ifdef OLED_DRIVER_ENABLE
+  #define OLED_DISPLAY_128X64
+#endif
+
+#ifdef RGBLIGHT_ENABLE
+  #define RGBLIGHT_ANIMATIONS
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_SLEEP
+#endif
+
+// EC11K encoders have a different resolution than other EC11 encoders.
+// When using the default resolution of 4, if you notice your encoder skipping
+// every other tick, lower the resolution to 2.
+#define ENCODER_RESOLUTION 2
+
+// The Leader key allows to flexibly assign macros to key sequences.
+#define LEADER_PER_KEY_TIMING
+#define LEADER_TIMEOUT 350
+
+#define TAPPING_TERM 200
+
+// Allows to use either side as the master. Look at the documentation for info:
+// https://docs.qmk.fm/#/config_options?id=setting-handedness
+#define EE_HANDS
+
+// Allows media codes to properly register in macros and rotary encoder code
+#define TAP_CODE_DELAY 10

keyboards/kyria/keymaps/thomasbaart/keymap.c

@@ -0,0 +1,333 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+uint16_t copy_paste_timer;
+
+enum layers {
+    QWERTY = 0,
+    LOWER,
+    RAISE,
+    NAV,
+    ADJUST
+};
+
+enum custom_keycodes {
+    KC_CCCV = SAFE_RANGE
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* 
+ * Base Layer: QWERTY
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * | ESC    |   Q  |   W  |   E  |   R  |   T  |                              |   Y  |   U  |   I  |   O  |   P  |  | \   |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * | LSFT   |   A  |   S  |  D   |   F  |   G  |                              |   H  |   J  |   K  |   L  | ;  : |  ' "   |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * | LCTL   |   Z  |   X  |   C  |   V  |   B  | CCCV |      |  | Del  |Leader|   N  |   M  | ,  < | . >  | /  ? |  - _   |
+ * `----------------------+------+------+------+------+      |  |------+------+------+------+------+----------------------'
+ *                        | GUI  | Alt  |      | Space| Enter|  | Bspc | Space|      | Tab  | AltGr|
+ *                        |      |      | Lower| Shift| Alt  |  |      | Nav  | Raise|      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [QWERTY] = LAYOUT(
+      KC_ESC,  KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,                                         KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_PIPE,
+      KC_LSFT, KC_A,   KC_S,   KC_D,   KC_F,   KC_G,                                         KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+      KC_LCTL, KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_CCCV,   XXXXXXX, KC_DEL, KC_LEAD,  KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_MINS,
+              KC_LGUI, KC_LALT, MO(LOWER), MT(MOD_LSFT, KC_SPC), MT(MOD_LALT, KC_ENT), KC_BSPC, LT(NAV, KC_SPC), MO(RAISE), KC_TAB, KC_RALT
+    ),
+/*
+ * Lower Layer: Numpad, Media
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        |      |      | VolUp|      |      |                              | / ?  | 7 &  | 8 *  | 9 (  | - _  |        |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        |      | Prev | Play | Next |      |                              | *    | 4 $  | 5 %  | 6 ^  | , <  | +      |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        |      |      | VolDn| Mute |      |      |      |  |      |      | 0 )  | 1 !  | 2 @  | 3 #  | = +  |        |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        |      |      | Lower|      |      |  |      | Nav  | Raise|      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [LOWER] = LAYOUT(
+      _______, _______, _______, KC_VOLU, _______, _______,                                     KC_SLSH, KC_7,    KC_8,    KC_9, KC_MINS, _______,
+      _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______,                                     KC_ASTR, KC_4,    KC_5,    KC_6, KC_COMM, KC_PLUS,
+      _______, _______, _______, KC_VOLD, KC_MUTE, _______, _______, _______, _______, _______, KC_0,    KC_1,    KC_2,    KC_3, KC_EQL,  _______,
+                                 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+/*
+ * Raise Layer: Symbols
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        |  !   |  @   |  {   |  }   |  |   |                              |      |  _   |  €   |      |      |  \     |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        |  #   |  $   |  (   |  )   |  `   |                              |   +  |  -   |  /   |  *   |  %   |  ' "   |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        |  %   |  ^   |  [   |  ]   |  ~   |      |      |  |      |      |   &  |  =   |  ,   |  .   |  / ? | - _    |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        |      |      | Lower|      |      |  |      | Nav  | Raise|      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [RAISE] = LAYOUT(
+      _______, KC_EXLM, KC_AT,   KC_LCBR, KC_RCBR, KC_PIPE,                                     _______, KC_UNDS, ALGR(KC_5),_______,_______,KC_BSLS,
+      _______, KC_HASH, KC_DLR,  KC_LPRN, KC_RPRN, KC_GRV,                                      KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_PERC, KC_QUOT,
+      _______, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD, _______, _______, _______, _______, KC_AMPR, KC_EQL,  KC_COMM, KC_DOT,  KC_SLSH, KC_MINS,
+                                 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+/*
+ * Navigation Layer
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        |      |      |      |      |      |                              | PgUp | Home | Up   | End  |      | ScrlLk |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |                              | PgDn | Left | Down | Right|      | CapsLk |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |      |  |      |      |      |      |      |      |      |        |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        |      |      | Lower|      |      |  |      | Nav  | Raise|      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [NAV] = LAYOUT(
+      _______, _______, _______, _______, _______, _______,                                     KC_PGUP, KC_HOME, KC_UP,   KC_END,  _______, KC_SLCK,
+      _______, _______, _______, _______, _______, _______,                                     KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_CAPS,
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+                                 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+/*
+ * Adjust Layer
+ *
+ * ,-------------------------------------------.                              ,-------------------------------------------.
+ * |        |      |      |      |      |      |                              |      | F7   | F8   | F9   | F10  |        |
+ * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+ * |        |      | SAI  | HUI  | VAI  |      |                              |      | F4   | F5   | F6   | F11  |        |
+ * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+ * |        |      | SAD  | HUD  | VAD  |      |      |      |  |      |      |      | F1   | F2   | F3   | F12  |        |
+ * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        |      |      |      |      |      |  |      |      |      |      |      |
+ *                        `----------------------------------'  `----------------------------------'
+ */
+    [ADJUST] = LAYOUT(
+      _______, _______, _______, _______, _______, _______,                                     _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  _______,
+      _______, _______, RGB_SAI, RGB_HUI, RGB_VAI, _______,                                     _______, KC_F4,   KC_F5,   KC_F6,   KC_F11,  _______,
+      _______, _______, RGB_SAD, RGB_HUD, RGB_VAD, _______, _______, _______, _______, _______, _______, KC_F1,   KC_F2,   KC_F3,   KC_F12,  _______,
+                                 _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+// /*
+//  * Layer template
+//  *
+//  * ,-------------------------------------------.                              ,-------------------------------------------.
+//  * |        |      |      |      |      |      |                              |      |      |      |      |      |        |
+//  * |--------+------+------+------+------+------|                              |------+------+------+------+------+--------|
+//  * |        |      |      |      |      |      |                              |      |      |      |      |      |        |
+//  * |--------+------+------+------+------+------+-------------.  ,-------------+------+------+------+------+------+--------|
+//  * |        |      |      |      |      |      |      |      |  |      |      |      |      |      |      |      |        |
+//  * `----------------------+------+------+------+------+------|  |------+------+------+------+------+----------------------'
+//  *                        |      |      |      |      |      |  |      |      |      |      |      |
+//  *                        |      |      |      |      |      |  |      |      |      |      |      |
+//  *                        `----------------------------------'  `----------------------------------'
+//  */
+//     [_LAYERINDEX] = LAYOUT(
+//       _______, _______, _______, _______, _______, _______,                                     _______, _______, _______, _______, _______, _______,
+//       _______, _______, _______, _______, _______, _______,                                     _______, _______, _______, _______, _______, _______,
+//       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+//                                  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+//     ),
+};
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+    return update_tri_layer_state(state, LOWER, RAISE, ADJUST);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case KC_CCCV:  // One key copy/paste
+            if (record->event.pressed) {
+                copy_paste_timer = timer_read();
+            } else {
+                if (timer_elapsed(copy_paste_timer) > TAPPING_TERM) {  // Hold, copy
+                    tap_code16(LCTL(KC_C));
+                } else { // Tap, paste
+                    tap_code16(LCTL(KC_V));
+                }
+            }
+            break;
+    }
+    return true;
+}
+
+LEADER_EXTERNS();
+
+void matrix_scan_user(void) {
+    LEADER_DICTIONARY() {
+        leading = false;
+        leader_end();
+
+        SEQ_ONE_KEY(KC_C) { // Inline Code
+            SEND_STRING("`` " SS_TAP(X_LEFT) SS_TAP(X_LEFT));
+        }
+        SEQ_ONE_KEY(KC_P) { // Invoke Password Manager
+            SEND_STRING(SS_LCTRL(SS_LALT("\\")));
+        }
+        SEQ_ONE_KEY(KC_S) { // Windows screenshot
+            SEND_STRING(SS_LGUI("\nS"));
+        }
+        SEQ_TWO_KEYS(KC_F, KC_P) { // Fusion Projection prefix
+            SEND_STRING("[Projection] ");
+        }
+        SEQ_TWO_KEYS(KC_E, KC_S) { // Email splitkb
+            SEND_STRING("thomas@splitkb.com");
+        }
+        SEQ_TWO_KEYS(KC_E, KC_P) { // Email personal
+            SEND_STRING("mail@thomasbaart.nl");
+        }
+        SEQ_TWO_KEYS(KC_S, KC_D) { // Splitkb documentation
+            SEND_STRING("https://docs.splitkb.com/");
+        }
+        SEQ_TWO_KEYS(KC_S, KC_V) { // Splitkb VAT number
+            SEND_STRING("NL210593349B01");
+        }
+        SEQ_THREE_KEYS(KC_S, KC_D, KC_K) { // Splitkb Kyria build log
+            SEND_STRING("https://docs.splitkb.com/docs/kyria-build-log/");
+        }
+        SEQ_TWO_KEYS(KC_B, KC_C) { // Discord bongocat
+            SEND_STRING(":bongocat:\n");
+        }
+        SEQ_TWO_KEYS(KC_C, KC_B) { // Discord code block
+            SEND_STRING("```c" SS_LSFT("\n\n") "``` " SS_TAP(X_UP));
+        }
+    }
+}
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+	return OLED_ROTATION_180;
+}
+
+static void render_kyria_logo(void) {
+    static const char PROGMEM kyria_logo[] = {
+        0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,128,128,192,224,240,112,120, 56, 60, 28, 30, 14, 14, 14,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7, 14, 14, 14, 30, 28, 60, 56,120,112,240,224,192,128,128,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,192,224,240,124, 62, 31, 15,  7,  3,  1,128,192,224,240,120, 56, 60, 28, 30, 14, 14,  7,  7,135,231,127, 31,255,255, 31,127,231,135,  7,  7, 14, 14, 30, 28, 60, 56,120,240,224,192,128,  1,  3,  7, 15, 31, 62,124,240,224,192,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,240,252,255, 31,  7,  1,  0,  0,192,240,252,254,255,247,243,177,176, 48, 48, 48, 48, 48, 48, 48,120,254,135,  1,  0,  0,255,255,  0,  0,  1,135,254,120, 48, 48, 48, 48, 48, 48, 48,176,177,243,247,255,254,252,240,192,  0,  0,  1,  7, 31,255,252,240,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,255,255,255,  0,  0,  0,  0,  0,254,255,255,  1,  1,  7, 30,120,225,129,131,131,134,134,140,140,152,152,177,183,254,248,224,255,255,224,248,254,183,177,152,152,140,140,134,134,131,131,129,225,120, 30,  7,  1,  1,255,255,254,  0,  0,  0,  0,  0,255,255,255,  0,  0,  0,  0,255,255,  0,  0,192,192, 48, 48,  0,  0,240,240,  0,  0,  0,  0,  0,  0,240,240,  0,  0,240,240,192,192, 48, 48, 48, 48,192,192,  0,  0, 48, 48,243,243,  0,  0,  0,  0,  0,  0, 48, 48, 48, 48, 48, 48,192,192,  0,  0,  0,  0,  0,
+        0,  0,  0,255,255,255,  0,  0,  0,  0,  0,127,255,255,128,128,224,120, 30,135,129,193,193, 97, 97, 49, 49, 25, 25,141,237,127, 31,  7,255,255,  7, 31,127,237,141, 25, 25, 49, 49, 97, 97,193,193,129,135, 30,120,224,128,128,255,255,127,  0,  0,  0,  0,  0,255,255,255,  0,  0,  0,  0, 63, 63,  3,  3, 12, 12, 48, 48,  0,  0,  0,  0, 51, 51, 51, 51, 51, 51, 15, 15,  0,  0, 63, 63,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 48, 48, 63, 63, 48, 48,  0,  0, 12, 12, 51, 51, 51, 51, 51, 51, 63, 63,  0,  0,  0,  0,  0,
+        0,  0,  0,  0, 15, 63,255,248,224,128,  0,  0,  3, 15, 63,127,255,239,207,141, 13, 12, 12, 12, 12, 12, 12, 12, 30,127,225,128,  0,  0,255,255,  0,  0,128,225,127, 30, 12, 12, 12, 12, 12, 12, 12, 13,141,207,239,255,127, 63, 15,  3,  0,  0,128,224,248,255, 63, 15,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,  3,  7, 15, 62,124,248,240,224,192,128,  1,  3,  7, 15, 30, 28, 60, 56,120,112,112,224,224,225,231,254,248,255,255,248,254,231,225,224,224,112,112,120, 56, 60, 28, 30, 15,  7,  3,  1,128,192,224,240,248,124, 62, 15,  7,  3,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  3,  7, 15, 14, 30, 28, 60, 56,120,112,112,112,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,112,112,112,120, 56, 60, 28, 30, 14, 15,  7,  3,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0
+    };
+    oled_write_raw_P(kyria_logo, sizeof(kyria_logo));
+}
+
+static void render_qmk_logo(void) {
+  static const char PROGMEM qmk_logo[] = {
+    0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+    0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+    0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
+
+  oled_write_P(qmk_logo, false);
+}
+
+static void render_status(void) {
+    // QMK Logo and version information
+    render_qmk_logo();
+    oled_write_P(PSTR("       Kyria rev1.0\n\n"), false);
+
+    // Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+    switch (get_highest_layer(layer_state)) {
+        case QWERTY:
+            oled_write_P(PSTR("Default\n"), false);
+            break;
+        case LOWER:
+            oled_write_P(PSTR("Lower\n"), false);
+            break;
+        case RAISE:
+            oled_write_P(PSTR("Raise\n"), false);
+            break;
+        case NAV:
+            oled_write_P(PSTR("Navigation\n"), false);
+            break;
+        case ADJUST:
+            oled_write_P(PSTR("Adjust\n"), false);
+            break;
+        default:
+            oled_write_P(PSTR("Undefined\n"), false);
+    }
+
+    // Host Keyboard LED Status
+    uint8_t led_usb_state = host_keyboard_leds();
+    oled_write_P(IS_LED_ON(led_usb_state, USB_LED_NUM_LOCK)    ? PSTR("NUMLCK ") : PSTR("       "), false);
+    oled_write_P(IS_LED_ON(led_usb_state, USB_LED_CAPS_LOCK)   ? PSTR("CAPLCK ") : PSTR("       "), false);
+    oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR("       "), false);
+}
+
+void oled_task_user(void) {
+    if (is_keyboard_master()) {
+        render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+        render_kyria_logo();
+    }
+}
+#endif
+
+#ifdef ENCODER_ENABLE
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        switch (biton32(layer_state)) {
+            case QWERTY:
+                // Move whole words. Hold shift to select while moving.
+                if (clockwise) {
+                    tap_code16(C(KC_RGHT));
+                } else {
+                    tap_code16(C(KC_LEFT));
+                }
+                break;
+            default:
+                // History scrubbing. For Adobe products, hold shift while moving
+                // backward to go forward instead.
+                if (clockwise) {
+                    tap_code16(C(KC_Z));
+                } else {
+                    tap_code16(C(KC_Y));
+                }
+                break;
+        }
+    } else if (index == 1) {
+        switch (biton32(layer_state)) {
+            case QWERTY:
+                // Scrolling with PageUp and PgDn.
+                if (clockwise) {
+                    tap_code(KC_PGDN);
+                } else {
+                    tap_code(KC_PGUP);
+                }
+                break;
+            default:
+                // Volume control.
+                if (clockwise) {
+                    tap_code(KC_VOLU);
+                } else {
+                    tap_code(KC_VOLD);
+                }
+                break;
+        }
+    }
+}
+#endif

keyboards/kyria/keymaps/thomasbaart/rules.mk

@@ -0,0 +1,5 @@
+OLED_DRIVER_ENABLE = yes   # Enables the use of OLED displays
+ENCODER_ENABLE = yes       # Enables the use of one or more encoders
+RGBLIGHT_ENABLE = yes      # Enable keyboard RGB underglow
+LEADER_ENABLE = yes        # Enable the Leader Key feature
+MOUSEKEY_ENABLE = no

keyboards/kyria/kyria.c

@@ -0,0 +1,16 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "kyria.h"

keyboards/kyria/kyria.h

@@ -0,0 +1,43 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    L00, L01, L02, L03, L04, L05,                     R06, R07, R08, R09, R10, R11, \
+    L12, L13, L14, L15, L16, L17,                     R18, R19, R20, R21, R22, R23, \
+    L24, L25, L26, L27, L28, L29, L30, L31, R32, R33, R34, R35, R36, R37, R38, R39, \
+                   L40, L41, L42, L43, L44, R45, R46, R47, R48, R49 \
+) \
+{ \
+    { KC_NO, KC_NO, L05,   L04,   L03,   L02,   L01,   L00   }, \
+    { KC_NO, KC_NO, L17,   L16,   L15,   L14,   L13,   L12   }, \
+    { L31,   L30,   L29,   L28,   L27,   L26,   L25,   L24   }, \
+    { L44,   L43,   L42,   L41,   L40,   KC_NO, KC_NO, KC_NO }, \
+    { KC_NO, KC_NO, R06,   R07,   R08,   R09,   R10,   R11   }, \
+    { KC_NO, KC_NO, R18,   R19,   R20,   R21,   R22,   R23   }, \
+    { R32,   R33,   R34,   R35,   R36,   R37,   R38,   R39   }, \
+    { R45,   R46,   R47,   R48,   R49,   KC_NO, KC_NO, KC_NO }, \
+}

keyboards/kyria/readme.md

@@ -0,0 +1,21 @@
+# Kyria
+
+![Kyria](https://cdn.shopify.com/s/files/1/0227/9171/6941/products/PlateCase_f1870016-98b8-43a9-8aed-3eaf073b367b_900x.jpg?v=1568934600)
+
+An ergonomical 40% split keyboard
+
+Keyboard Maintainer: [splitkb.com](https://github.com/splitkb)  
+Hardware Supported: Pro Micro 5V/16MHz and compatible.  
+Hardware Availability: [splitkb.com](https://splitkb.com) and partners.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make kyria:default
+
+Example of flashing this keyboard:
+
+    make kyria/rev1:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+A build guide for the Kyria can be found at [docs.splitkb.com](https://docs.splitkb.com/docs/kyria-build-log/).

keyboards/kyria/rev1/config.h

@@ -0,0 +1,65 @@
+/*
+Copyright 2019 Thomas Baart <thomas@splitkb.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x0000
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    splitkb
+#define PRODUCT         Kyria Keyboard
+#define DESCRIPTION     Split 40 percent ergonomic keyboard
+
+/* key matrix size */
+/* Rows are doubled up */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 8
+
+// wiring
+#define MATRIX_ROW_PINS { B4, E6, D7, D4 }
+#define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 }
+#define UNUSED_PINS
+
+#define ENCODERS_PAD_A { C6 }
+#define ENCODERS_PAD_B { B5 }
+#define ENCODERS_PAD_A_RIGHT { B5 }
+#define ENCODERS_PAD_B_RIGHT { C6 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D2
+
+#define RGB_DI_PIN D3
+#define RGBLED_SPLIT { 10, 10 }
+#define RGBLED_NUM 20
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/kyria/rev1/rev1.c

@@ -0,0 +1 @@
+#include "rev1.h"

keyboards/kyria/rev1/rev1.h

@@ -0,0 +1,43 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "kyria.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    L00, L01, L02, L03, L04, L05,                     R06, R07, R08, R09, R10, R11, \
+    L12, L13, L14, L15, L16, L17,                     R18, R19, R20, R21, R22, R23, \
+    L24, L25, L26, L27, L28, L29, L30, L31, R32, R33, R34, R35, R36, R37, R38, R39, \
+                   L40, L41, L42, L43, L44, R45, R46, R47, R48, R49 \
+) \
+{ \
+    { KC_NO, KC_NO, L05,   L04,   L03,   L02,   L01,   L00   }, \
+    { KC_NO, KC_NO, L17,   L16,   L15,   L14,   L13,   L12   }, \
+    { L31,   L30,   L29,   L28,   L27,   L26,   L25,   L24   }, \
+    { L44,   L43,   L42,   L41,   L40,   KC_NO, KC_NO, KC_NO }, \
+    { KC_NO, KC_NO, R06,   R07,   R08,   R09,   R10,   R11   }, \
+    { KC_NO, KC_NO, R18,   R19,   R20,   R21,   R22,   R23   }, \
+    { R32,   R33,   R34,   R35,   R36,   R37,   R38,   R39   }, \
+    { R45,   R46,   R47,   R48,   R49,   KC_NO, KC_NO, KC_NO }, \
+}

keyboards/kyria/rev1/rules.mk

@@ -0,0 +1,3 @@
+OLED_DRIVER_ENABLE = yes   # Enables the use of OLED displays
+ENCODER_ENABLE = yes       # ENables the use of one or more encoders
+RGBLIGHT_ENABLE = yes      # Enable keyboard RGB underglow

keyboards/kyria/rules.mk

@@ -0,0 +1,36 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes      # Mouse keys
+EXTRAKEY_ENABLE = yes      # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no      # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no           # MIDI support
+UNICODE_ENABLE = no        # Unicode
+BLUETOOTH_ENABLE = no      # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no          # Audio output on port C6
+FAUXCLICKY_ENABLE = no     # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no        # Enable support for HD44780 based LCDs
+SPLIT_KEYBOARD = yes       # Split common
+LINK_TIME_OPTIMIZATION_ENABLE =yes 
+
+DEFAULT_FOLDER = kyria/rev1

keyboards/mechmini/v1/i2c.c

@@ -1,104 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}

keyboards/mechmini/v1/i2c.h

@@ -1,22 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif

keyboards/mechmini/v1/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,10 +19,10 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c
+SRC = matrix.c

keyboards/mechmini/v1/v1.c

@@ -16,61 +16,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "v1.h"
-#include <avr/pgmspace.h>
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
-#include "rgblight.h"
 
-// for keyboard subdirectory level init functions
-// @Override
-void matrix_init_kb(void) {
-  // call user level keymaps, if any
-  matrix_init_user();
-}
+void matrix_init_kb(void) { matrix_init_user(); }
 
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
+__attribute__ ((weak))
+void matrix_init_user(void) {}
 
-// custom RGB driver
-void rgblight_set(void) {
-  if (!rgblight_config.enable) {
-    for (uint8_t i=0; i<RGBLED_NUM; i++) {
-      led[i].r = 0;
-      led[i].g = 0;
-      led[i].b = 0;
-    }
-  }
+void matrix_scan_kb(void) { matrix_scan_user(); }
 
-  i2c_init();
-  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-  // if LEDs were previously on before poweroff, turn them back on
-  if (rgb_init == false && rgblight_config.enable) {
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-    rgb_init = true;
-  }
-
-  rgblight_task();
-#else
-void matrix_scan_kb(void) {
-#endif
-  matrix_scan_user();
-  /* Nothing else for now. */
-}
-
-__attribute__((weak)) // overridable
-void matrix_init_user(void) {
-
-}
-
-
-__attribute__((weak)) // overridable
-void matrix_scan_user(void) {
-
-}
+__attribute__ ((weak))
+void matrix_scan_user(void) {}

keyboards/mehkee96/i2c.c

@@ -1,106 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file 
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}

keyboards/mehkee96/i2c.h

@@ -1,27 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif

keyboards/mehkee96/mehkee96.c

@@ -16,66 +16,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "mehkee96.h"
-#include "rgblight.h"
 
-#include <avr/pgmspace.h>
+void matrix_init_kb(void) { matrix_init_user(); }
 
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
+__attribute__ ((weak))
+void matrix_init_user(void) {}
 
-// for keyboard subdirectory level init functions
-// @Override
-void matrix_init_kb(void) {
-  // call user level keymaps, if any
-  matrix_init_user();
-}
+void matrix_scan_kb(void) { matrix_scan_user(); }
 
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-// custom RGB driver
-void rgblight_set(void) {
-  if (!rgblight_config.enable) {
-    for (uint8_t i=0; i<RGBLED_NUM; i++) {
-      led[i].r = 0;
-      led[i].g = 0;
-      led[i].b = 0;
-    }
-  }
-
-  i2c_init();
-  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-  // if LEDs were previously on before poweroff, turn them back on
-  if (rgb_init == false && rgblight_config.enable) {
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-    rgb_init = true;
-  }
-
-#ifdef RGBLIGHT_ANIMATION
-  rgblight_task();
-#endif
-
-#else
-void matrix_scan_kb(void) {
-#endif
-  matrix_scan_user();
-  /* Nothing else for now. */
-}
-
-__attribute__((weak)) // overridable
-void matrix_init_user(void) {
-
-}
-
-
-__attribute__((weak)) // overridable
-void matrix_scan_user(void) {
-
-}
+__attribute__ ((weak))
+void matrix_scan_user(void) {}

keyboards/mehkee96/rules.mk

@@ -21,10 +21,10 @@ CONSOLE_ENABLE = yes	# Console for debug(+400)
 COMMAND_ENABLE = yes    # Commands for debug and configuration
 BACKLIGHT_ENABLE = no  # Enable keyboard backlight functionality
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c
+SRC = matrix.c

keyboards/model01/keymaps/dshields/keymap.c

@@ -17,8 +17,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [FUN] = LAYOUT(
     EEP_RST, KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  ,                      KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 ,
     KC_TAB , _______, KC_MS_U, _______, KC_BTN3, _______, RGB_MOD,    DM_STRT, _______, KC_LCBR, KC_RCBR, KC_LBRC, KC_RBRC, KC_F12 ,
-    KC_HOME, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN1, _______, _______,    _______, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT, _______, _______,
-    KC_END , KC_PSCR, KC_INS , _______, KC_BTN2, _______, _______,    DM_STOP, _______, _______, _______, _______, KC_BSLS, KC_PIPE,
+    KC_HOME, KC_MS_L, KC_MS_D, KC_MS_R, KC_BTN1, _______, RGB_HUI,    _______, KC_LEFT, KC_DOWN, KC_UP  , KC_RGHT, _______, _______,
+    KC_END , KC_PSCR, KC_INS , _______, KC_BTN2, _______, RGB_HUD,    DM_STOP, _______, _______, _______, _______, KC_BSLS, KC_PIPE,
                                            _______,                                 _______,
                                               KC_DEL ,                           KC_ENT ,
                                                  _______,                     _______,

keyboards/mt40/i2c.c

@@ -1,104 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}

keyboards/mt40/i2c.h

@@ -1,25 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif

keyboards/mt40/mt40.c

@@ -13,32 +13,5 @@
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
+
 #include "mt40.h"
-#include "rgblight.h"
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
-
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
-    rgblight_task();
-    matrix_init_user();
-}

keyboards/mt40/rules.mk

@@ -24,14 +24,14 @@ AUDIO_ENABLE ?= no      # Audio output on port C6
 UNICODE_ENABLE ?= no    # Unicode
 BLUETOOTH_ENABLE ?= no  # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE ?= yes  # Enable WS2812 RGB underlight. 
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 TAP_DANCE_ENABLE = no
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c
+SRC = matrix.c
 
 LAYOUTS = planck_mit
 LAYOUTS_HAS_RGB = no

keyboards/percent/canoe/canoe.c

@@ -16,81 +16,43 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "canoe.h"
-#ifdef BACKLIGHT_ENABLE
-#include "backlight.h"
-#endif
-#ifdef RGBLIGHT_ENABLE
-#include "i2c.h"
-#include "rgblight.h"
-#endif
+
+void matrix_init_kb(void) { matrix_init_user(); }
+
+__attribute__ ((weak))
+void matrix_init_user(void) {}
+
+void matrix_scan_kb(void) { matrix_scan_user(); }
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {}
 
 #ifdef BACKLIGHT_ENABLE
 void backlight_set(uint8_t level) {
 	if (level == 0) {
 		// Turn out the lights
-		PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
+		writePinLow(D0);
+		writePinLow(D1);
+		writePinLow(D4);
+		writePinLow(D6);
 	} else {
 		// Turn on the lights
-		PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
+		writePinHigh(D0);
+		writePinHigh(D1);
+		writePinHigh(D4);
+		writePinHigh(D6);
 	}
 }
 
 void backlight_init_ports(void) {
-	DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
-	PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
-}
+	setPinOutput(D0);
+	setPinOutput(D1);
+	setPinOutput(D4);
+	setPinOutput(D6);
 
+	writePinLow(D0);
+	writePinLow(D1);
+	writePinLow(D4);
+	writePinLow(D6);
+}
 #endif
-
-// for keyboard subdirectory level init functions
-// @Override
-void matrix_init_kb(void) {
-  // call user level keymaps, if any
-  matrix_init_user();
-}
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-// custom RGB driver
-void rgblight_set(void) {
-  if (!rgblight_config.enable) {
-    for (uint8_t i=0; i<RGBLED_NUM; i++) {
-      led[i].r = 0;
-      led[i].g = 0;
-      led[i].b = 0;
-    }
-  }
-
-  i2c_init();
-  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-  // if LEDs were previously on before poweroff, turn them back on
-  if (rgb_init == false && rgblight_config.enable) {
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-    rgb_init = true;
-  }
-
-  rgblight_task();
-#else
-void matrix_scan_kb(void) {
-#endif
-  matrix_scan_user();
-  /* Nothing else for now. */
-}
-
-__attribute__((weak)) // overridable
-void matrix_init_user(void) {
-
-}
-
-
-__attribute__((weak)) // overridable
-void matrix_scan_user(void) {
-
-}

keyboards/percent/canoe/i2c.c

@@ -1,106 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file 
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}

keyboards/percent/canoe/i2c.h

@@ -1,27 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file 
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif

keyboards/percent/canoe/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,12 +19,12 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c
+SRC = matrix.c
 
-LAYOUTS = 65_ansi_blocker
+LAYOUTS = 65_ansi_blocker

keyboards/percent/skog/i2c.c

@@ -1,106 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file 
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}

keyboards/percent/skog/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2018 Jumail Mundekkat / MxBlue
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,9 +19,9 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
+WS2812_DRIVER = i2c
 
 BACKLIGHT_CUSTOM_DRIVER = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
@@ -45,4 +30,4 @@ SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c backlight.c
+SRC = matrix.c backlight.c

keyboards/percent/skog/skog.c

@@ -19,23 +19,18 @@ ps2avrGB support code by Kenneth A. (bminiex/.[ch])
 
 #include "skog.h"
 
-#include "rgblight.h"
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
-
 #include "backlight.h"
 #include "backlight_custom.h"
 
-// for keyboard subdirectory level init functions
-// @Override
-void matrix_init_kb(void) {
-  // call user level keymaps, if any
-  matrix_init_user();
-}
+void matrix_init_kb(void) { matrix_init_user(); }
+
+__attribute__ ((weak))
+void matrix_init_user(void) {}
+
+void matrix_scan_kb(void) { matrix_scan_user(); }
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {}
 
 #ifdef BACKLIGHT_ENABLE
 /// Overrides functions in `quantum.c`
@@ -51,48 +46,3 @@ void backlight_set(uint8_t level) {
   b_led_set(level);
 }
 #endif
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-// custom RGB driver
-void rgblight_set(void) {
-  if (!rgblight_config.enable) {
-    for (uint8_t i=0; i<RGBLED_NUM; i++) {
-      led[i].r = 0;
-      led[i].g = 0;
-      led[i].b = 0;
-    }
-  }
-
-  i2c_init();
-  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-  // if LEDs were previously on before poweroff, turn them back on
-  if (rgb_init == false && rgblight_config.enable) {
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-    rgb_init = true;
-  }
-
-  rgblight_task();
-#else
-void matrix_scan_kb(void) {
-#endif
-  matrix_scan_user();
-  /* Nothing else for now. */
-}
-
-__attribute__((weak)) // overridable
-void matrix_init_user(void) {
-
-}
-
-__attribute__((weak)) // overridable
-void matrix_scan_user(void) {
-
-}

keyboards/planck/keymaps/dshields/keymap.c

@@ -24,7 +24,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     [FUN] = LAYOUT_planck_grid(
         KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   RESET,   EEP_RST, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10 ,
         KC_F11,  KC_F12,  KC_F13,  KC_F14,  KC_F15,  _______, _______, _______, KC_WH_L, KC_WH_D, KC_WH_U, KC_WH_R,
-        LGT_TOG, LGT_MOD, LGT_BRT, _______, _______, DM_STRT, DM_STOP, _______, _______, KC_BTN1, KC_BTN2, KC_BTN3,
+        LGT_TOG, LGT_MOD, LGT_BRT, LGT_INC, LGT_DEC, DM_STRT, DM_STOP, _______, _______, KC_BTN1, KC_BTN2, KC_BTN3,
         _______, _______, _______, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R
     )
 };

keyboards/v60_type_r/config.h

@@ -53,14 +53,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_LEVELS 3
 #define BACKLIGHT_ON_STATE 0
 
-#define RGBLIGHT_CUSTOM_DRIVER
-#define RGBLIGHT_ANIMATIONS
+//#define RGB_DI_PIN 0
 #define RGBLED_NUM 1
+#define RGBLIGHT_ANIMATIONS
+#define RGB_STEP 16
+
 #define RGB_RED_PIN PF6
 #define RGB_GREEN_PIN PF5
 #define RGB_BLUE_PIN PF4
-#define RGB_DI_PIN 0
-#define RGB_STEP 16
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5

keyboards/v60_type_r/rules.mk

@@ -17,18 +17,21 @@ BOOTLOADER = atmel-dfu
 BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = yes        # Console for debug(+400)
+CONSOLE_ENABLE = no         # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 NKRO_ENABLE = no            # USB Nkey Rollover
-BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
-RGBLIGHT_ENABLE = yes        # Enable the RGB Underglow
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes       # Enable the RGB Underglow
+RGBLIGHT_CUSTOM_DRIVER = yes
 MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 
+LINK_TIME_OPTIMIZATION_ENABLE = yes
+
 LAYOUTS = 60_ansi 60_iso

keyboards/v60_type_r/v60_type_r.c

@@ -18,13 +18,7 @@
 #include "quantum.h"
 
 // if we've got an RGB underglow!
-#ifdef V60_POLESTAR
-
-#include "rgblight.h"
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
+#ifdef RGBLIGHT_ENABLE
 
 #define SOFTPWM_LED_TIMER_TOP F_CPU/(256*64)
 
@@ -191,4 +185,4 @@ ISR(TIMER3_COMPA_vect)
     	softpwm_buff[2] = led[0].b;
   	}
 }
-#endif // V60_POLESTAR
+#endif // RGBLIGHT_ENABLE

keyboards/v60_type_r/v60_type_r.h

@@ -17,7 +17,7 @@
 
 #include "quantum.h"
 
-#ifdef V60_POLESTAR
+#ifdef RGBLIGHT_ENABLE
 
 #include "rgblight.h"
 

keyboards/winkeyless/bmini/bmini.c

@@ -16,30 +16,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "bmini.h"
-#include "rgblight.h"
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
-
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
 
 __attribute__ ((weak))
-void matrix_scan_user(void) {
-    rgblight_task();
-}
+void matrix_scan_user(void) {}

keyboards/winkeyless/bmini/i2c.c

@@ -1,106 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file 
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}

keyboards/winkeyless/bmini/i2c.h

@@ -1,27 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file 
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif

keyboards/winkeyless/bmini/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -34,10 +19,10 @@ CONSOLE_ENABLE = yes
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c
+SRC = matrix.c

keyboards/winkeyless/bminiex/bminiex.c

@@ -16,24 +16,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "bminiex.h"
-#include "rgblight.h"
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
 
 #include "backlight.h"
 #include "backlight_custom.h"
 
-// for keyboard subdirectory level init functions
-// @Override
-void matrix_init_kb(void) {
-  // call user level keymaps, if any
-  matrix_init_user();
-}
-
 #ifdef BACKLIGHT_ENABLE
 /// Overrides functions in `quantum.c`
 void backlight_init_ports(void) {
@@ -48,50 +34,3 @@ void backlight_set(uint8_t level) {
   b_led_set(level);
 }
 #endif
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-// custom RGB driver
-void rgblight_set(void) {
-  if (!rgblight_config.enable) {
-    for (uint8_t i=0; i<RGBLED_NUM; i++) {
-      led[i].r = 0;
-      led[i].g = 0;
-      led[i].b = 0;
-    }
-  }
-
-  i2c_init();
-  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-  // if LEDs were previously on before poweroff, turn them back on
-  if (rgb_init == false && rgblight_config.enable) {
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-    rgb_init = true;
-  }
-
-  rgblight_task();
-#else
-void matrix_scan_kb(void) {
-#endif
-  matrix_scan_user();
-  /* Nothing else for now. */
-}
-
-__attribute__((weak)) // overridable
-void matrix_init_user(void) {
-
-}
-
-__attribute__((weak)) // overridable
-void matrix_scan_user(void) {
-
-}
-
-

keyboards/winkeyless/bminiex/i2c.c

@@ -1,106 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-// Please do not modify this file 
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}

keyboards/winkeyless/bminiex/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -36,7 +21,7 @@ COMMAND_ENABLE = no
 BACKLIGHT_ENABLE = yes
 BACKLIGHT_CUSTOM_DRIVER = yes
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 TAP_DANCE_ENABLE = no
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -46,4 +31,4 @@ OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c backlight.c
+SRC = matrix.c backlight.c

keyboards/ymd75/i2c.c

@@ -1,104 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}

keyboards/ymd75/i2c.h

@@ -1,25 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif

keyboards/ymd75/rules.mk

@@ -1,19 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-# Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com>
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -35,7 +19,7 @@ CONSOLE_ENABLE = no
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = yes
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 NKRO_ENABLE = no
 # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 
@@ -51,4 +35,4 @@ SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c backlight.c
+SRC = matrix.c backlight.c

keyboards/ymd75/ymd75.c

@@ -16,23 +16,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "ymd75.h"
-//#include "rgblight.h"
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
 
 #include "backlight.h"
 #include "backlight_custom.h"
 
-// for keyboard subdirectory level init functions
-// @Override
-void matrix_init_kb(void) {
-    // call user level keymaps, if any
-    matrix_init_user();
-}
+void matrix_init_kb(void) { matrix_init_user(); }
+
+__attribute__ ((weak))
+void matrix_init_user(void) {}
+
+void matrix_scan_kb(void) { matrix_scan_user(); }
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {}
 
 #ifdef BACKLIGHT_ENABLE
 /// Overrides functions in `quantum.c`
@@ -48,48 +44,3 @@ void backlight_set(uint8_t level) {
     b_led_set(level);
 }
 #endif
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-// custom RGB driver
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i=0; i<RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-    
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-    // if LEDs were previously on before poweroff, turn them back on
-    if (rgb_init == false && rgblight_config.enable) {
-        i2c_init();
-        i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-        rgb_init = true;
-    }
-    
-    rgblight_task();
-#else
-    void matrix_scan_kb(void) {
-#endif
-        matrix_scan_user();
-        /* Nothing else for now. */
-    }
-    
-    __attribute__((weak)) // overridable
-    void matrix_init_user(void) {
-        
-    }
-    
-    __attribute__((weak)) // overridable
-    void matrix_scan_user(void) {
-        
-    }

keyboards/ymd96/i2c.c

@@ -1,104 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}

keyboards/ymd96/i2c.h

@@ -1,25 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif

keyboards/ymd96/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -37,7 +22,7 @@ BACKLIGHT_ENABLE = yes
 BACKLIGHT_CUSTOM_DRIVER = yes
 
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
+WS2812_DRIVER = i2c
 
 KEY_LOCK_ENABLE = yes
 
@@ -48,4 +33,4 @@ OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c backlight.c
+SRC = matrix.c backlight.c

keyboards/ymd96/ymd96.c

@@ -18,22 +18,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "ymd96.h"
 
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "quantum.h"
-
-#include "i2c.h"
-
 #include "backlight.h"
 #include "backlight_custom.h"
 
-// for keyboard subdirectory level init functions
-// @Override
-void matrix_init_kb(void) {
-  // call user level keymaps, if any
-  matrix_init_user();
-}
+void matrix_init_kb(void) { matrix_init_user(); }
+
+__attribute__ ((weak))
+void matrix_init_user(void) {}
+
+void matrix_scan_kb(void) { matrix_scan_user(); }
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {}
 
 #ifdef BACKLIGHT_ENABLE
 /// Overrides functions in `quantum.c`
@@ -49,49 +45,3 @@ void backlight_set(uint8_t level) {
   b_led_set(level);
 }
 #endif
-
-#ifdef RGBLIGHT_ENABLE
-extern rgblight_config_t rgblight_config;
-
-// custom RGB driver
-void rgblight_set(void) {
-  if (!rgblight_config.enable) {
-    for (uint8_t i=0; i<RGBLED_NUM; i++) {
-      led[i].r = 0;
-      led[i].g = 0;
-      led[i].b = 0;
-    }
-  }
-
-  i2c_init();
-  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-bool rgb_init = false;
-
-void matrix_scan_kb(void) {
-  // if LEDs were previously on before poweroff, turn them back on
-  if (rgb_init == false && rgblight_config.enable) {
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-    rgb_init = true;
-  }
-
-  rgblight_task();
-#else
-void matrix_scan_kb(void) {
-#endif
-  matrix_scan_user();
-  /* Nothing else for now. */
-}
-
-__attribute__((weak)) // overridable
-void matrix_init_user(void) {
-
-}
-
-
-__attribute__((weak)) // overridable
-void matrix_scan_user(void) {
-
-}

keyboards/ymdk_np21/i2c.c

@@ -1,104 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <avr/io.h>
-#include <util/twi.h>
-
-#include "i2c.h"
-
-void i2c_set_bitrate(uint16_t bitrate_khz) {
-    uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
-    if (bitrate_div >= 16) {
-        bitrate_div = (bitrate_div - 16) / 2;
-    }
-    TWBR = bitrate_div;
-}
-
-void i2c_init(void) {
-    // set pull-up resistors on I2C bus pins
-    PORTC |= 0b11;
-
-    i2c_set_bitrate(400);
-
-    // enable TWI (two-wire interface)
-    TWCR |= (1 << TWEN);
-
-    // enable TWI interrupt and slave address ACK
-    TWCR |= (1 << TWIE);
-    TWCR |= (1 << TWEA);
-}
-
-uint8_t i2c_start(uint8_t address) {
-    // reset TWI control register
-    TWCR = 0;
-
-    // begin transmission and wait for it to end
-    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the start condition was successfully transmitted
-    if ((TWSR & 0xF8) != TW_START) {
-        return 1;
-    }
-
-    // transmit address and wait
-    TWDR = address;
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    // check if the device has acknowledged the READ / WRITE mode
-    uint8_t twst = TW_STATUS & 0xF8;
-    if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
-        return 1;
-    }
-
-    return 0;
-}
-
-void i2c_stop(void) {
-    TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-}
-
-uint8_t i2c_write(uint8_t data) {
-    TWDR = data;
-
-    // transmit data and wait
-    TWCR = (1<<TWINT) | (1<<TWEN);
-    while (!(TWCR & (1<<TWINT)));
-
-    if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
-        return 1;
-    }
-
-    return 0;
-}
-
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
-    if (i2c_start(address)) {
-        return 1;
-    }
-
-    for (uint16_t i = 0; i < length; i++) {
-        if (i2c_write(data[i])) {
-            return 1;
-        }
-    }
-
-    i2c_stop();
-
-    return 0;
-}

keyboards/ymdk_np21/i2c.h

@@ -1,25 +0,0 @@
-/*
-Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef __I2C_H__
-#define __I2C_H__
-
-void i2c_init(void);
-void i2c_set_bitrate(uint16_t bitrate_khz);
-uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
-
-#endif

keyboards/ymdk_np21/rules.mk

@@ -1,18 +1,3 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
 # MCU name
 MCU = atmega32a
 
@@ -37,8 +22,7 @@ BACKLIGHT_ENABLE = yes
 BACKLIGHT_CUSTOM_DRIVER = yes
 
 RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
-# DISABLE_WS2812 = no
+WS2812_DRIVER = i2c
 
 KEY_LOCK_ENABLE = yes
 
@@ -49,4 +33,4 @@ OPT_DEFS = -DDEBUG_LEVEL=0
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c backlight.c
+SRC = matrix.c backlight.c

keyboards/ymdk_np21/ymdk_np21.c

@@ -18,25 +18,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "ymdk_np21.h"
 
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "quantum.h"
-
-#include "i2c.h"
-
 #include "backlight.h"
 #include "backlight_custom.h"
 
-extern rgblight_config_t rgblight_config;
-
-// for keyboard subdirectory level init functions
-// @Override
-void matrix_init_kb(void) {
-  // call user level keymaps, if any
-  matrix_init_user();
-}
-
 #ifdef BACKLIGHT_ENABLE
 /// Overrides functions in `quantum.c`
 void backlight_init_ports(void) {
@@ -51,32 +35,3 @@ void backlight_set(uint8_t level) {
   b_led_set(level);
 }
 #endif
-
-// custom RGB driver
-void rgblight_set(void) {
-  if (!rgblight_config.enable) {
-    for (uint8_t i=0; i<RGBLED_NUM; i++) {
-      led[i].r = 0;
-      led[i].g = 0;
-      led[i].b = 0;
-    }
-  }
-
-  i2c_init();
-  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-bool rgb_init = false;
-void matrix_scan_kb(void) {
-  // if LEDs were previously on before poweroff, turn them back on
-  if (rgb_init == false && rgblight_config.enable) {
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-    rgb_init = true;
-  }
-
-  rgblight_task();
-  /* Nothing else for now. */
-
-  matrix_scan_user();
-}

tmk_core/common.mk

@@ -203,6 +203,9 @@ ifeq ($(strip $(SHARED_EP_ENABLE)), yes)
     TMK_COMMON_DEFS += -DSHARED_EP_ENABLE
 endif
 
+ifeq ($(strip $(LTO_ENABLE)), yes)
+    LINK_TIME_OPTIMIZATION_ENABLE = yes
+endif
 
 ifeq ($(strip $(LINK_TIME_OPTIMIZATION_ENABLE)), yes)
     EXTRAFLAGS += -flto

users/dshields/dshields.h

@@ -21,20 +21,27 @@
 // mod-tap keys
 #define MT_SPC  SFT_T(KC_SPC)
 
+// LED/RGB controls
 #ifdef KEYBOARD_planck_light
     #define LGT_TOG RGB_TOG
     #define LGT_MOD RGB_MOD
     #define LGT_BRT _______
+    #define LGT_INC RGB_HUI
+    #define LGT_DEC RGB_HUD
 #endif
 #ifdef KEYBOARD_planck_rev3
     #define LGT_TOG BL_TOGG
     #define LGT_MOD BL_STEP
     #define LGT_BRT BL_BRTG
+    #define LGT_INC BL_INC
+    #define LGT_DEC BL_DEC
 #endif
 #ifdef KEYBOARD_planck_rev6
     #define LGT_TOG _______
     #define LGT_MOD _______
     #define LGT_BRT _______
+    #define LGT_INC _______
+    #define LGT_DEC _______
 #endif
 
 enum layers   { DEF, LWR, RSE, FUN };