convert to unix line-endings [skip ci]

* Fix LAYOUT define generation

Prior to this, only the full keyboard path was defined.  Eg `KEYBOARD_planck_rev6`.
But the docs mention `KEYBOAD_planck`, which never actually gets defined.

This addresses this, and creates a define for each level of the keyboard folder, so that stuff like `KEYBOARD_planck` actually exists.

* Clean up changes to make it more readable

build_keyboard.mk

@@ -110,8 +110,28 @@ ifneq ("$(wildcard $(KEYBOARD_C_1))","")
     KEYBOARD_SRC += $(KEYBOARD_C_1)
 endif
 
-OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE)
+# Generate KEYBOARD_name_subname for all levels of the keyboard folder
+KEYBOARD_FILESAFE_1 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_1)))
+KEYBOARD_FILESAFE_2 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_2)))
+KEYBOARD_FILESAFE_3 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_3)))
+KEYBOARD_FILESAFE_4 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_4)))
+KEYBOARD_FILESAFE_5 := $(subst .,,$(subst /,_,$(KEYBOARD_FOLDER_PATH_5)))
 
+ifneq ("$(wildcard $(KEYBOARD_PATH_5)/)","")
+    OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_5)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_4)/)","")
+    OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_4)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_3)/)","")
+    OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_3)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_2)/)","")
+    OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_2)
+endif
+ifneq ("$(wildcard $(KEYBOARD_PATH_1)/)","")
+    OPT_DEFS += -DKEYBOARD_$(KEYBOARD_FILESAFE_1)
+endif
 
 # Setup the define for QMK_KEYBOARD_H. This is used inside of keymaps so
 # that the same keymap may be used on multiple keyboards.

common_features.mk

@@ -234,8 +234,6 @@ ifeq ($(strip $(LEADER_ENABLE)), yes)
   OPT_DEFS += -DLEADER_ENABLE
 endif
 
-include $(DRIVER_PATH)/qwiic/qwiic.mk
-
 QUANTUM_SRC:= \
     $(QUANTUM_DIR)/quantum.c \
     $(QUANTUM_DIR)/keymap_common.c \

docs/_sidebar.md

@@ -3,6 +3,7 @@
   * [Building Your First Firmware](newbs_building_firmware.md)
   * [Flashing Firmware](newbs_flashing.md)
   * [Testing and Debugging](newbs_testing_debugging.md)
+  * [Learning Resources](newbs_learn_more_resources.md)
 
 * [QMK Basics](README.md)
   * [QMK Introduction](getting_started_introduction.md)
@@ -47,6 +48,7 @@
   * [Backlight](feature_backlight.md)
   * [Bluetooth](feature_bluetooth.md)
   * [Bootmagic](feature_bootmagic.md)
+  * [Combos](feature_combo)
   * [Command](feature_command.md)
   * [Dynamic Macros](feature_dynamic_macros.md)
   * [Grave Escape](feature_grave_esc.md)
@@ -74,6 +76,7 @@
 * For Makers and Modders
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)
+  * [ARM Debugging Guide](arm_debugging.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)

docs/_summary.md

@@ -47,6 +47,7 @@
   * [Backlight](feature_backlight.md)
   * [Bluetooth](feature_bluetooth.md)
   * [Bootmagic](feature_bootmagic.md)
+  * [Combos](feature_combo)
   * [Command](feature_command.md)
   * [Dynamic Macros](feature_dynamic_macros.md)
   * [Grave Escape](feature_grave_esc.md)
@@ -74,6 +75,7 @@
 * For Makers and Modders
   * [Hand Wiring Guide](hand_wire.md)
   * [ISP Flashing Guide](isp_flashing_guide.md)
+  * [ARM Debugging Guide](arm_debugging.md)
 
 * For a Deeper Understanding
   * [How Keyboards Work](how_keyboards_work.md)

docs/arm_debugging.md

@@ -0,0 +1,87 @@
+# ARM Debugging usign Eclipse
+
+This page describes how to setup debugging for ARM MCUs using an SWD adapter and open-source/free tools. In this guide we will install GNU MCU Eclipse IDE for C/C++ Developers and OpenOCD together with all the necessary dependencies.
+
+This guide is catered towards advance users and assumes you can compile an ARM compatible keyboard on your machine using the MAKE flow.
+
+## Installing the software
+
+The main objective here is to get the MCU Eclipse IDE correcly installed on our machine. The necesarry instructions are derived from [this](https://gnu-mcu-eclipse.github.io/install/) install guide.
+
+### The xPack Manager
+
+This tool is a software package manager and it is used to help us get the necesarry depencencies.
+
+XPM runs using Node.js so grab that form [here](https://nodejs.org/en/). After installation, open a terminal and type `npm -v`. A reply with the version number means that the instalation was successful.
+
+XPM instalation instructions can be found [here](https://www.npmjs.com/package/xpm) and are OS specific. Entering `xpm --version` to your terminal should return the software version.
+
+### The ARM Toolchain
+
+Using XPM it is very easy to install the ARM toolchain. Enter the command `xpm install --global @gnu-mcu-eclipse/arm-none-eabi-gcc`.
+
+### Windows build tools
+
+If you are using windows you need to install this!
+
+`xpm install --global @gnu-mcu-eclipse/windows-build-tools`
+
+### Programer/Debugger Drivers
+
+Now its the time to install your programer's drivers. This tutorial was made using an ST-Link v2 which you can get from almost anywhere.
+If you have an ST-Link the drivers can be found [here](https://www.st.com/en/development-tools/stsw-link009.html) otherwise consult the manufuturer of your tool.
+
+### OpenOCD
+
+This dependency allows SWD access from GDB and it is essential for debugging. Run `xpm install --global @gnu-mcu-eclipse/openocd`.
+
+### Java
+
+Java is needed by Eclipse so please download it from [here](https://www.oracle.com/technetwork/java/javase/downloads/index.html).
+
+### GNU MCU Eclipse IDE
+
+Now its finally time to install the IDE. Use the Release page [here](https://github.com/gnu-mcu-eclipse/org.eclipse.epp.packages/releases/) to get the latest version.
+
+## Configuring Eclipse
+
+Open up the Eclipse IDE we just downloaded. To import our QMK directory select File -> Import -> C/C++ -> Existing code as Makefile Project. Select next and use Browse to select your QMK folder. In the tool-chain list select ARM Cross GCC and select Finish.
+
+Now you can see the QMK folder on the left hand side. Right click it and select Properties. On the left hand side, expand MCU and select ARM Toolchain Paths. Press xPack and OK. Repeat for OpenOCD Path  and if you are on windows for Build Tool Path. Select Apply and Close.
+
+Now its time to install the necessary MCU packages. Go to Packs perspective by selecting Window -> Open Perspective -> Others -> Packs. Now select the yellow refresh symbol next to the Packs tab. This will take a long time as it is requesting the MCU definitions from various places. If some of the links fail you can probably select Ignore.
+
+When this finishes you must find the MCU which we will be building/debugging for. In this example I will be using the STM32F3 series MCUs. On the left, select STMicroelectonics -> STM32F3 Series. On the middle window we can see the pack. Right click and select Install. Once that is done we can go back to the default perspective, Window -> Open Perspective -> Others -> C/C++.
+
+We need to let eclipse know the device we intent to build QMK on. Right click on the QMK folder -> Properties -> C/C++ Build -> Settings. Select the Devices tab and under devices select the appropriate variant of your MCU. For my example it is STM32F303CC
+
+While we are here let's setup the build command as well. Select C/C++ Build and then the Behavior tab. On the build command, replace `all` with your necessary make command. For example for a rev6 Planck with the default keymap this would be `planck/rev6:default`. Select Apply and Close.
+
+## Building
+
+If you have setup everything correctly pressing the hammer button should build the firmware for you and a .bin file should appear.
+
+## Debugging
+
+### Connecting the Debugger
+
+ARM MCUs use the Single Wire Debug (SWD) protocol which comprises of the clock (SWCLK) signal and the data (SWDIO) signal. Connecting this two wires and ground should be enough to allow full manipulation of the MCU. Here we assume that the keyboard will be powered though USB. The RESET signal is not necessary as we can manually assert it using the reset button. For a more advance setup, the SWO signal can be used which pipes printf and scanf asynchronously to the host but for our setup we will ignore it.
+
+NOTE: Make sure the SWCLK and SWDIO pins are not used in the matrix of your keyboard. If they are you can temporarily switch them for some other pins.
+
+### Configuring the Debugger
+
+Right click on your QMK folder, select Debug As -> Debug Configuration. Here double click on GDB OpenOCD Debugging. Select the debugger tab and enter the configuration necessary for your MCU. This might take some fiddling and googleing to find out. The default script for the STM32F3 is called stm32f3discovery.cfg. To let OpenOCD know, in the Config options enter `-f board/stm32f3discovery.cfg`.
+
+NOTE: In my case this configuration script requires editing to disable the reset assertion. The locations of the scripts can be found in the actual executable field usually under the path `openocd/version/.content/scripts/board`. Here I edited `reset_config srst_only` to `reset_config none`.
+
+Select Apply and Close.
+
+### Running the Debugger.
+
+Reset your keyboard.
+
+Press the bug icon and if all goes well you should soon find yourself in the debug perspective. Here the program counter will pause at the beginning of the main function and way for you to press Play. Most of the features of all debuggers work on ARM MCUs but for exact details google is your friend!
+
+
+Happy debugging!

docs/config_options.md

@@ -155,6 +155,10 @@ If you define these options you will enable the associated feature, which may in
     going to produce the 500 keystrokes a second needed to actually get more than a
     few ms of delay from this. But if you're doing chording on something with 3-4ms
     scan times? You probably want this.
+* `#define COMBO_COUNT 2`
+  * Set this to the number of combos that you're using in the [Combo](feature_combo.md) feature.
+* `#define COMBO_TERM 200`
+  * how long for the Combo keys to be detected. Defaults to `TAPPING_TERM` if not defined.
 
 ## RGB Light Configuration
 
@@ -234,6 +238,8 @@ Use these to enable or disable building certain features. The more you have enab
   * Console for debug(+400)
 * `COMMAND_ENABLE`
   * Commands for debug and configuration
+* `COMBO_ENABLE`
+  * Key combo feature
 * `NKRO_ENABLE`
   * USB N-Key Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 * `AUDIO_ENABLE`
@@ -245,7 +251,9 @@ Use these to enable or disable building certain features. The more you have enab
 * `UNICODE_ENABLE`
   * Unicode
 * `BLUETOOTH_ENABLE`
-  * Enable Bluetooth with the Adafruit EZ-Key HID
+  * Legacy option to Enable Bluetooth with the Adafruit EZ-Key HID. See BLUETOOTH
+* `BLUETOOTH`
+  * Current options are AdafruitEzKey, AdafruitBLE, RN42
 * `SPLIT_KEYBOARD`
   * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
 * `WAIT_FOR_USB`

docs/contributing.md

@@ -57,14 +57,14 @@ Never made an open source contribution before? Wondering how contributions work
 Most of our style is pretty easy to pick up on, but right now it's not entirely consistent. You should match the style of the code surrounding your change, but if that code is inconsistent or unclear use the following guidelines:
 
 * We indent using two spaces (soft tabs)
-* We use One True Brace Style
+* We use a modified One True Brace Style
   * Opening Brace: At the end of the same line as the statement that opens the block
   * Closing Brace: Lined up with the first character of the statement that opens the block
   * Else If: Place the closing brace at the beginning of the line and the next opening brace at the end of the same line.
   * Optional Braces: Always include optional braces.
     * Good: if (condition) { return false; }
     * Bad: if (condition) return false;
-* We use C style comments: `/* */`
+* We encourage use of C style comments: `/* */`
   * Think of them as a story describing the feature
   * Use them liberally to explain why particular decisions were made.
   * Do not write obvious comments
@@ -72,6 +72,25 @@ Most of our style is pretty easy to pick up on, but right now it's not entirely
 * In general we don't wrap lines, they can be as long as needed. If you do choose to wrap lines please do not wrap any wider than 76 columns.
 * We use `#pragma once` at the start of header files rather than old-style include guards (`#ifndef THIS_FILE_H`, `#define THIS_FILE_H`, ..., `#endif`)
 
+Here is an example for easy reference:
+
+```c
+/* Enums for foo */
+enum foo_state {
+  FOO_BAR,
+  FOO_BAZ,
+};
+
+/* Returns a value */
+int foo(void) {
+  if (some_condition) {
+    return FOO_BAR;
+  } else {
+    return -1;
+  }
+}
+```
+
 # General Guidelines
 
 We have a few different types of changes in QMK, each requiring a different level of rigor. We'd like you to keep the following guidelines in mind no matter what type of change you're making.

docs/custom_quantum_functions.md

@@ -117,12 +117,12 @@ void led_set_user(uint8_t usb_led) {
     } else {
         PORTB &= ~(1<<2);
     }
-    if (usb_led & (1<<USB_LED_COMPOSE_LOCK)) {
+    if (usb_led & (1<<USB_LED_COMPOSE)) {
         PORTB |= (1<<3);
     } else {
         PORTB &= ~(1<<3);
     }
-    if (usb_led & (1<<USB_LED_KANA_LOCK)) {
+    if (usb_led & (1<<USB_LED_KANA)) {
         PORTB |= (1<<4);
     } else {
         PORTB &= ~(1<<4);

docs/feature_advanced_keycodes.md

@@ -26,7 +26,8 @@ These functions allow you to activate layers in various ways. Note that layers a
 * `DF(layer)` - switches the default layer. The default layer is the always-active base layer that other layers stack on top of. See below for more about the default layer. This might be used to switch from QWERTY to Dvorak layout. (Note that this is a temporary switch that only persists until the keyboard loses power. To modify the default layer in a persistent way requires deeper customization, such as calling the `set_single_persistent_default_layer` function inside of [process_record_user](custom_quantum_functions.md#programming-the-behavior-of-any-keycode).)
 * `MO(layer)` - momentarily activates *layer*. As soon as you let go of the key, the layer is deactivated. 
 * `LM(layer, mod)` - Momentarily activates *layer* (like `MO`), but with modifier(s) *mod* active. Only supports layers 0-15 and the left modifiers.
-* `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped.
+* `LT(layer, kc)` - momentarily activates *layer* when held, and sends *kc* when tapped. Only supports layers 0-15.
+* `OSL(layer)` - momentarily activates *layer* until the next key is pressed. See [One Shot Keys](#one-shot-keys) for details and additional functionality.
 * `TG(layer)` - toggles *layer*, activating it if it's inactive and vice versa
 * `TO(layer)` - activates *layer* and de-activates all other layers (except your default layer). This function is special, because instead of just adding/removing one layer to your active layer stack, it will completely replace your current active layers, uniquely allowing you to replace higher layers with a lower one. This is activated on keydown (as soon as the key is pressed).
 * `TT(layer)` - Layer Tap-Toggle. If you hold the key down, *layer* is activated, and then is de-activated when you let go (like `MO`). If you repeatedly tap it, the layer will be toggled on or off (like `TG`). It needs 5 taps by default, but you can change this by defining `TAPPING_TOGGLE` -- for example, `#define TAPPING_TOGGLE 2` to toggle on just two taps.

docs/feature_bluetooth.md

@@ -1,10 +1,40 @@
 # Bluetooth
 
-## Bluetooth Functionality
+## Bluetooth Known Supported Hardware
 
+Currently Bluetooth support is limited to AVR based chips. For Bluetooth 2.1 Qmk has support for RN-42 HID Firmware and Bluefruit EZ Key the later of which is not produced anymore. For more recent BLE protocols currently only the Adafruit Bluefruit SPI friend is directly supported. BLE is needed to connect to iOS devices. Note iOS does not support Mouse Input.
+
+|Board                                                           |Bluetooth Protocol          |Connection Type |Rules.mk                   |Bluetooth Chip|
+|----------------------------------------------------------------|----------------------------|----------------|---------------------------|--------------|
+|[Adafruit EzKey HID]("https://www.adafruit.com/product/1535")   |Bluetooth Classic           | UART           | BLUETOOTH = AdafruitEZKey |              |
+|Rover Networks RN-42 (Sparkfun Bluesmirf)                       |Bluetooth Classic           | UART           | BLUETOOTH = RN42          | RN-42        |
+|[Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633)|Bluetooth Low Energy        | SPI            | BLUETOOTH = AdafruitBLE   | nRF5182      |
+
+Not Supported Yet but possible:
+* [Bluefruit LE UART Friend](https://www.adafruit.com/product/2479). [Possible tmk implementation found in](https://github.com/tmk/tmk_keyboard/issues/514)
+* HC-05 boards flashed with RN-42 firmware. They apparently both use the CSR BC417 Chip. Flashing it with RN-42 firmware gives it HID capability.
+* [Sparkfun Bluetooth mate](https://www.sparkfun.com/products/14839)
+* HM-13 based boards
+
+### Adafruit BLE SPI Friend
+Currently The only bluetooth chipset supported by QMK is the Adafruit Bluefruit SPI Friend. It's a Nordic nRF5182 based chip running Adafruit's custom firmware. Data is transmitted via Adafruit's SDEP over Hardware SPI. The [Feather 32u4 Bluefruit LE](https://www.adafruit.com/product/2829) is supported as it's an AVR mcu connected via SPI to the Nordic BLE chip with Adafruit firmware. If Building a custom board with the SPI friend it would be easiest to just use the pin selection that the 32u4 feather uses but you can change the pins in the config.h options with the following defines:
+* #define AdafruitBleResetPin D4
+* #define AdafruitBleCSPin    B4
+* #define AdafruitBleIRQPin   E6
+
+A Bluefruit UART friend can be converted to an SPI friend, however this [requires](https://github.com/qmk/qmk_firmware/issues/2274) some reflashing and soldering directly to the MDBT40 chip.
+
+## Adafruit EZ-Key hid
 This requires [some hardware changes](https://www.reddit.com/r/MechanicalKeyboards/comments/3psx0q/the_planck_keyboard_with_bluetooth_guide_and/?ref=search_posts), but can be enabled via the Makefile. The firmware will still output characters via USB, so be aware of this when charging via a computer. It would make sense to have a switch on the Bluefruit to turn it off at will.
 
+
 <!-- FIXME: Document bluetooth support more completely. -->
+## Bluetooth Rules.mk Options
+Use only one of these
+* BLUETOOTH_ENABLE = yes (Legacy Option)
+* BLUETOOTH = RN42
+* BLUETOOTH = AdafruitEZKey
+* BLUETOOTH = AdafruitBLE
 
 ## Bluetooth Keycodes
 

docs/feature_combo.md

@@ -0,0 +1,88 @@
+# Combos
+
+The Combo feature is a chording type solution for adding custom actions.  It lets you hit multiple keys at once and produce a different effect.  For instance, hitting `A` and `S` within the tapping term would hit `ESC` instead, or have it perform even more complex tasks.
+
+To enable this feature, yu need to add `COMBO_ENABLE = yes` to your `rules.mk`.
+
+Additionally, in your `config.h`, you'll need to specify the number of combos that you'll be using, by adding `#define COMBO_COUNT 1` (replacing 1 with the number that you're using).
+<!-- At this time, this is necessary -->
+
+Also, by default, the tapping term for the Combos is set to the same value as `TAPPING_TERM` (200 by default on most boards). But you can specify a different value by defining it in your `config.h`.  For instance: `#define COMBO_TERM 300` would set the time out period for combos to 300ms.
+
+Then, your `keymap.c` file, you'll need to define a sequence of keys, terminated with `COMBO_END`, and a structure to list the combination of keys, and it's resulting action.
+
+```c
+const uint16_t PROGMEM test_combo[] = {KC_A, KC_B, COMBO_END};
+combo_t key_combos[COMBO_COUNT] = {COMBO(test_combo, KC_ESC)};
+```
+
+This will send "Escape" if you hit the A and B keys.
+
+!> This method only supports [basic keycodes](keycodes_basic.md). See the examples for more control.
+
+## Examples
+
+If you want to add a list, then you'd use something like this:
+
+```c
+enum combos {
+  AB_ESC,
+  JK_TAB
+}
+const uint16_t PROGMEM ab_combo[] = {KC_A, KC_B, COMBO_END};
+const uint16_t PROGMEM jk_combo[] = {KC_J, KC_K, COMBO_END};
+
+combo_t key_combos[COMBO_COUNT] = {
+  [AB_ESC] = COMBO(ab_combo, KC_ESC),
+  [JK_TAB] = COMBO(jk_combo, KC_TAB)
+};
+```
+
+For a more complicated implementation, you can use the `process_combo_event` function to add custom handling.
+
+```c
+enum combo_events {
+  ZC_COPY,
+  ZV_PASTE
+  };
+
+const uint16_t PROGMEM copy_combo[] = {KC_Z, KC_C, COMBO_END};
+const uint16_t PROGMEM paste_combo[] = {KC_Z, KC_V, COMBO_END};
+
+combo_t key_combos[COMBO_COUNT] = {
+  [ZC_COPY] = COMBO_ACTION(copy_combo),
+  [ZV_PASTE] = COMBO_ACTION(paste_combo),
+};
+
+void process_combo_event(uint8_t combo_index, bool pressed) {
+  switch(combo_index) {
+    case ZC_COPY:
+      if (pressed) {
+        register_code(KC_LCTL);
+        register_code(KC_C);
+        unregister_code(KC_C);
+        unregister_code(KC_LCTL);
+      }
+      break;
+
+    case ZV_PASTE:
+      if (pressed) {
+        register_code(KC_LCTL);
+        register_code(KC_V);
+        unregister_code(KC_V);
+        unregister_code(KC_LCTL);
+      }
+      break;
+  }
+}
+```
+
+This will send Ctrl+C if you hit Z and C, and Ctrl+V if you hit Z and V.  But you could change this to do stuff like change layers, play sounds, or change settings.
+
+## Additional Configuration
+
+If you're using long combos, or even longer combos, you may run into issues with this, as the structure may not be large enough to accommodate what you're doing.
+
+In this case, you can add either `#define EXTRA_LONG_COMBOS` or `#define EXTRA_EXTRA_LONG_COMBOS` in your `config.h` file.
+
+You may also be able to enable action keys by defining `COMBO_ALLOW_ACTION_KEYS`.

docs/feature_rgblight.md

@@ -96,9 +96,10 @@ if `RGBLIGHT_EFFECT_xxxx` or `RGBLIGHT_ANIMATIONS` is defined, you also have a n
 |`RGBLIGHT_MODE_RGB_TEST`     | *None*            |RGB Test                               |
 |`RGBLIGHT_MODE_ALTERNATING`  | *None*            |Alternating                            |
 
-
 Check out [this video](https://youtube.com/watch?v=VKrpPAHlisY) for a demonstration.
 
+Note: For versions older than 0.6.117, The mode numbers were written directly. In `quantum/rgblight.h` there is a contrast table between the old mode number and the current symbol.
+
 The following options can be used to tweak the various animations:
 
 |Define                              |Default      |Description                                                                          |

docs/feature_unicode.md

@@ -4,45 +4,108 @@ There are three Unicode keymap definition method available in QMK:
 
 ## UNICODE_ENABLE
 
-Supports Unicode input up to 0xFFFF. The keycode function is `UC(n)` in
-keymap file, where *n* is a 4 digit hexadecimal.
+Supports Unicode input up to 0xFFFF. The keycode function is `UC(n)` in keymap file, where *n* is a 4 digit hexadecimal.
 
 ## UNICODEMAP_ENABLE
 
-Supports Unicode up to 0xFFFFFFFF. You need to maintain a separate mapping
-table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file.
-The keycode function is `X(n)` where *n* is the array index of the mapping
-table.
+Supports Unicode up to 0xFFFFFFFF. You need to maintain a separate mapping table `const uint32_t PROGMEM unicode_map[] = {...}` in your keymap file. The keycode function is `X(n)` where *n* is the array index of the mapping table.
+
+And you may want to have an enum to make reference easier.  So you'd want to add something like this to your keymap:
+
+```c
+enum unicode_name {
+  BANG, // ‽
+  IRONY, // ⸮
+  SNEK // snke 🐍
+};
+
+const uint32_t PROGMEM unicode_map[] = {
+  [BANG]      = 0x0203D, // ‽
+  [IRONY]     = 0x02E2E, // ⸮
+  [SNEK]      = 0x1F40D // snke 🐍
+}:
+```
+
+Make sure that the order for both matches.
 
 ## UCIS_ENABLE
 
-TBD
+Supports Unicode up to 0xFFFFFFFF. As with `UNICODE_MAP`, you may want to main a mapping table in your keymap file.  However, there is no keycodes for this feature, you will have to add a keycode or function to call `qk_ucis_start()`. Once you've run that, you can just type the text for your unicode, and then hit space or enter to complete it, or ESC to cancel it. And if it matches an entry in your table, it will automatically "backspace" the trigger word (from your table) and then will input the unicode sequence.
 
-Unicode input in QMK works by inputing a sequence of characters to the OS,
+For instance, you would need to have a table like this in your keymap:
+
+```c
+const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE
+(
+ UCIS_SYM("poop", 0x1f4a9),
+ UCIS_SYM("rofl", 0x1f923),
+ UCIS_SYM("kiss", 0x1f619)
+);
+```
+
+You run the function, and then type "rofl" and hit enter, it should backspace remove "rofl" and input the `0x1f923` unicode.
+
+### Customization
+
+There are several functions that you can add to your keymap to customize the functionality of this feature.
+
+* `void qk_ucis_start_user(void)` - This runs when you run the "start" function, and can be used to provide feedback. By default, it types out a keyboard emoji.
+* `void qk_ucis_success(uint8_t symbol_index)` - This runs when the unicode input has matched something, and has completed. Default doesn't do anything.
+* `void qk_ucis_symbol_fallback (void)` - This runs if the input text doesn't match anything.  The default function falls back to trying that input as a unicode code.
+
+The default code for these are:
+
+```c
+void qk_ucis_start_user(void) { // outputs keyboard emoji
+  unicode_input_start();
+  register_hex(0x2328);
+  unicode_input_finish();
+}
+
+void qk_ucis_success(uint8_t symbol_index) {
+}
+
+void qk_ucis_symbol_fallback (void) { // falls back to manual unicode entry
+  for (uint8_t i = 0; i < qk_ucis_state.count - 1; i++) {
+    uint8_t code = qk_ucis_state.codes[i];
+    register_code(code);
+    unregister_code(code);
+    wait_ms(UNICODE_TYPE_DELAY);
+  }
+}
+```
+
+## Unicode Input methods
+
+Unicode input in QMK works by inputting a sequence of characters to the OS,
 sort of like macro. Unfortunately, each OS has different ideas on how Unicode is input.
 
 This is the current list of Unicode input method in QMK:
 
-* UC_OSX: MacOS Unicode Hex Input support. Works only up to 0xFFFF. Disabled by default. To enable: go to System Preferences -> Keyboard -> Input Sources, and enable Unicode Hex.
-* UC_OSX_RALT: Same as UC_OSX, but sends the Right Alt key for unicode input
-* UC_LNX: Unicode input method under Linux. Works up to 0xFFFFF. Should work almost anywhere on ibus enabled distros. Without ibus, this works under GTK apps, but rarely anywhere else.
-* UC_WIN: (not recommended) Windows built-in Unicode input. To enable: create registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad`, set its value to 1, and reboot. This method is not recommended because of reliability and compatibility issue, use WinCompose method below instead.
-* UC_WINC: Windows Unicode input using WinCompose. Requires [WinCompose](https://github.com/samhocevar/wincompose). Works reliably under many (all?) variations of Windows.
+* __UC_OSX__: MacOS Unicode Hex Input support. Works only up to 0xFFFF. Disabled by default. To enable: go to System Preferences -> Keyboard -> Input Sources, and enable Unicode Hex.
+* __UC_OSX_RALT__: Same as UC_OSX, but sends the Right Alt key for unicode input
+* __UC_LNX__: Unicode input method under Linux. Works up to 0xFFFFF. Should work almost anywhere on ibus enabled distros. Without ibus, this works under GTK apps, but rarely anywhere else.
+* __UC_WIN__: (not recommended) Windows built-in Unicode input. To enable: create registry key under `HKEY_CURRENT_USER\Control Panel\Input Method\EnableHexNumpad` of type `REG_SZ` called `EnableHexNumpad`, set its value to 1, and reboot. This method is not recommended because of reliability and compatibility issue, use WinCompose method below instead.
+* __UC_WINC__: Windows Unicode input using WinCompose. Requires [WinCompose](https://github.com/samhocevar/wincompose). Works reliably under many (all?) variations of Windows.
 
-To type multiple characters for things like (ノಠ痊ಠ)ノ彡┻━┻, you can use `send_unicode_hex_string()` much like `SEND_STRING()` except you would use hex values seperated by spaces.
+At some point, you need to call `set_unicode_input_mode(x)` to set the correct unicode method.  This sets the method that is used to send the unicode, and stores it in EEPROM, so you only need to call this once.
+
+## `send_unicode_hex_string`
+
+To type multiple characters for things like (ノಠ痊ಠ)ノ彡┻━┻, you can use `send_unicode_hex_string()` much like `SEND_STRING()` except you would use hex values separate by spaces.
 For example, the table flip seen above would be `send_unicode_hex_string("0028 30CE 0CA0 75CA 0CA0 0029 30CE 5F61 253B 2501 253B")`
 
 There are many ways to get a hex code, but an easy one is [this site](https://r12a.github.io/app-conversion/). Just make sure to convert to hexadecimal, and that is your string.
 
-# Additional Language Support
+## Additional Language Support
 
 In `quantum/keymap_extras/`, you'll see various language files - these work the same way as the alternative layout ones do. Most are defined by their two letter country/language code followed by an underscore and a 4-letter abbreviation of its name. `FR_UGRV` which will result in a `ù` when using a software-implemented AZERTY layout. It's currently difficult to send such characters in just the firmware.
 
-# International Characters on Windows
+## International Characters on Windows
 
-[AutoHotkey](https://autohotkey.com) allows Windows users to create custom hotkeys among others.
+### AutoHotkey allows Windows users to create custom hotkeys among others.
 
-The method does not require Unicode support in the keyboard itself but depends instead of AutoHotkey running in the background.
+The method does not require Unicode support in the keyboard itself but depends instead of [AutoHotkey](https://autohotkey.com) running in the background.
 
 First you need to select a modifier combination that is not in use by any of your programs.
 CtrlAltWin is not used very widely and should therefore be perfect for this.
@@ -57,3 +120,11 @@ In the default script of AutoHotkey you can define custom hotkeys.
 
 The hotkeys above are for the combination CtrlAltGui and CtrlAltGuiShift plus the letter a.
 AutoHotkey inserts the Text right of `Send, ` when this combination is pressed.
+
+### US International
+
+If you enable the US International layout on the system, it will use punctuation to accent the characters. 
+
+For instance, typing "`a" will result in à.
+
+You can find details on how to enable this [here](https://support.microsoft.com/en-us/help/17424/windows-change-keyboard-layout).

docs/getting_started_github.md

@@ -8,7 +8,7 @@ Start on the [QMK Github page](https://github.com/qmk/qmk_firmware), and you'll
 
 ![Fork on Github](http://i.imgur.com/8Toomz4.jpg)
 
-If you're apart of an organization, you'll need to choose which account to fork it to. In most circumstances, you'll want to fork it to your personal account. Once your fork is completed (sometimes this takes a little while), click the "Clone or Download" button:
+If you're a part of an organization, you'll need to choose which account to fork it to. In most circumstances, you'll want to fork it to your personal account. Once your fork is completed (sometimes this takes a little while), click the "Clone or Download" button:
 
 ![Download from Github](http://i.imgur.com/N1NYcSz.jpg)
 

docs/hardware_avr.md

@@ -8,7 +8,7 @@ If you have not yet you should read the [Keyboard Guidelines](hardware_keyboard_
 
 QMK has a number of features to simplify working with AVR keyboards. For most keyboards you don't have to write a single line of code. To get started run the `util/new_project.sh` script:
 
-```
+```bash
 $ util/new_project.sh my_awesome_keyboard
 ######################################################
 # /keyboards/my_awesome_keyboard project created. To start
@@ -30,7 +30,7 @@ This is where all the custom logic for your keyboard goes. Many keyboards do not
 
 This is the file you define your [Layout Macro(s)](feature_layouts.md) in. At minimum you should have a `#define LAYOUT` for your keyboard that looks something like this:
 
-```
+```c
 #define LAYOUT(          \
       k00, k01, k02,     \
       k10,   k11         \
@@ -57,7 +57,7 @@ At the top of the `config.h` you'll find USB related settings. These control how
 
 Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately reflect your keyboard.
 
-```
+```c
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6060
 #define DEVICE_VER      0x0001
@@ -72,14 +72,14 @@ Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately r
 
 The next section of the `config.h` file deals with your keyboard's matrix. The first thing you should set is the matrix's size. This is usually, but not always, the same number of rows and columns as the physical key arrangement.
 
-```
+```c
 #define MATRIX_ROWS 2
 #define MATRIX_COLS 3
 ```
 
 Once you've defined the size of your matrix you need to define which pins on your MCU are connected to rows and columns. To do so simply specify the names of those pins:
 
-```
+```c
 #define MATRIX_ROW_PINS { D0, D5 }
 #define MATRIX_COL_PINS { F1, F0, B0 }
 #define UNUSED_PINS
@@ -89,7 +89,7 @@ The number of `MATRIX_ROW_PINS` entries must be the same as the number you assig
 
 Finally, you can specify the direction your diodes point. This can be `COL2ROW`, `ROW2COL`, or `CUSTOM_MATRIX`.
 
-```
+```c
 #define DIODE_DIRECTION COL2ROW
 ```
 
@@ -97,16 +97,14 @@ Finally, you can specify the direction your diodes point. This can be `COL2ROW`,
 
 By default QMK supports backlighting on pins `B5`, `B6`, and `B7`. If you are using one of those you can simply enable it here. For more details see the [Backlight Documentation](feature_backlight.md).
 
-```
+```c
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_LEVELS 3
 #define BACKLIGHT_BREATHING
 #define BREATHING_PERIOD 6
 ```
 
-{% hint style='info' %}
-You can use backlighting on any pin you like, but you will have to do more work to support that. See the [Backlight Documentation](feature_backlight.md) for more details.
-{% endhint %}
+?> You can use backlighting on any pin you like, but you will have to do more work to support that. See the [Backlight Documentation](feature_backlight.md) for more details.
 
 ### Other Configuration Options
 
@@ -120,7 +118,7 @@ You use the `rules.mk` file to tell QMK what files to build and what features to
 
 These options tell the build system what CPU to build for. Be very careful if you change any of these settings, you can render your keyboard inoperable.
 
-```
+```make
 MCU = atmega32u4
 F_CPU = 16000000
 ARCH = AVR8
@@ -128,26 +126,26 @@ F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 ```
 
-### Bootloader Size
+### Bootloaders
 
-The bootloader is a special section of your MCU that allows you to upgrade the code stored on the MCU. Think of it like a Rescue Partition for your keyboard. If you are using a teensy 2.0, or a device like the Ergodox EZ that uses the teensy bootloader you should set this to `512`. Most other bootloaders should be set to `4096`, but `1024` and `2048` are other possible values you may encounter.
+The bootloader is a special section of your MCU that allows you to upgrade the code stored on the MCU. Think of it like a Rescue Partition for your keyboard. 
 
-#### Teensy 2.0 Bootloader Example
+#### Teensy Bootloader Example
 
-```
-OPT_DEFS += -DBOOTLOADER_SIZE=512
-```
-
-#### Teensy 2.0++ Bootloader Example
-
-```
-OPT_DEFS += -DBOOTLOADER_SIZE=1024
+```make
+BOOTLOADER = halfkay
 ```
 
 #### Atmel DFU Loader Example
 
+```make
+BOOTLOADER = atmel-dfu
 ```
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+#### Pro Micro Bootloader Example
+
+```make
+BOOTLOADER = caterina
 ```
 
 ### Build Options

docs/newbs.md

@@ -6,7 +6,7 @@ Not sure if your keyboard can run QMK? If it's a mechanical keyboard you built y
 
 ## Overview
 
-There are 4 main sections to this guide:
+There are 5 main sections to this guide:
 
 * [Getting Started](newbs_getting_started.md)
 * [Building Your First Firmware](newbs_building_firmware.md)
@@ -15,4 +15,3 @@ There are 4 main sections to this guide:
 * [Learn More with these Resources](newbs_learn_more_resources.md)
 
 This guide is focused on helping someone who has never compiled software before. It makes choices and recommendations based on that viewpoint. There are alternative methods for many of these procedures, and we support most of those alternatives. If you have any doubt about how to accomplish a task you can [ask us for guidance](getting_started_getting_help.md).
-

docs/newbs_learn_more_resources.md

@@ -2,12 +2,12 @@
 These resources are aimed at giving new members in the qmk community more understanding to the information provided in the newbs docs.
 
 Git resources:
-*
-*[Great General Tutorial](https://www.codecademy.com/learn/learn-git)
-*[Git Game To Learn From Examples](https://learngitbranching.js.org/)
-*[Git Resources to Learn More About Github](getting_started_github.md)
-*[Git Resources Aimed Specificly toward QMK](contributing.md)
+
+* [Great General Tutorial](https://www.codecademy.com/learn/learn-git)
+* [Git Game To Learn From Examples](https://learngitbranching.js.org/)
+* [Git Resources to Learn More About Github](getting_started_github.md)
+* [Git Resources Aimed Specificly toward QMK](contributing.md)
 
 
 Command Line resources:
-*[Good General Tutorial on Command Line](https://www.codecademy.com/learn/learn-the-command-line)
+* [Good General Tutorial on Command Line](https://www.codecademy.com/learn/learn-the-command-line)

drivers/arm/i2c_master.c

@@ -43,12 +43,7 @@ static const I2CConfig i2cconfig = {
 
 void i2c_init(void)
 {
-  //palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT);
-
-  // Try releasing special pins for a short time
-  palSetPadMode(GPIOB, 6, PAL_MODE_INPUT);
-  palSetPadMode(GPIOB, 7, PAL_MODE_INPUT);
-
+  palSetGroupMode(GPIOB, GPIOB_PIN6 | GPIOB_PIN7, 0, PAL_MODE_INPUT); // Try releasing special pins for a short time
   chThdSleepMilliseconds(10);
 
   palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP);
@@ -79,10 +74,6 @@ uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t ti
   return i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout));
 }
 
-uint8_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length) {
-  return i2cMasterTransmitTimeout(&I2C_DRIVER, address/2, tx_body, tx_length, rx_body, rx_length, MS2ST(100));
-}
-
 uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_address = devaddr;

drivers/arm/i2c_master.h

@@ -34,7 +34,6 @@ void i2c_init(void);
 uint8_t i2c_start(uint8_t address);
 uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);
-uint8_t i2c_transmit_receive(uint8_t address, uint8_t * tx_body, uint16_t tx_length, uint8_t * rx_body, uint16_t rx_length);
 uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout);
 uint8_t i2c_stop(uint16_t timeout);

drivers/avr/i2c_master.c

@@ -8,7 +8,9 @@
 #include "i2c_master.h"
 #include "timer.h"
 
+#ifndef F_SCL
 #define F_SCL 400000UL // SCL frequency
+#endif
 #define Prescaler 1
 #define TWBR_val ((((F_CPU / F_SCL) / Prescaler) - 16 ) / 2)
 

drivers/qwiic/joystiic.c

@@ -1,125 +0,0 @@
-/* Copyright 2018 Jack Humbert <jack.humb@gmail.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "joystiic.h"
-#include "print.h"
-#include "action.h"
-
-#define JOYSTIIC_DEFAULT_ADDR       0x20
-#define JOYSTIIC_COMMAND_HORIZONTAL 0x00
-#define JOYSTIIC_COMMAND_VERTICAL   0x02
-#define JOYSTIIC_COMMAND_BUTTON     0x04
-
-#define JOYSTIIC_CENTER 512
-#define JOYSTIIC_DEADZONE 200
-
-uint16_t joystiic_horizontal;
-uint16_t joystiic_vertical;
-bool joystiic_button;
-
-uint8_t joystiic_tx[1];
-uint8_t joystiic_rx_horizontal[2];
-uint8_t joystiic_rx_vertical[2];
-uint8_t joystiic_rx_button[1];
-
-bool joystiic_triggered[5] = {0};
-
-void joystiic_init(void) {
-  i2c_init();
-  i2c_start(JOYSTIIC_DEFAULT_ADDR);
-}
-
-void joystiic_update(uint16_t horizontal, uint16_t vertical, bool button) {
-  joystiic_update_kb(horizontal, vertical, button);
-  joystiic_update_user(horizontal, vertical, button);
-}
-
-__attribute__ ((weak))
-void joystiic_update_kb(uint16_t horizontal, uint16_t vertical, bool button) { }
-
-__attribute__ ((weak))
-void joystiic_update_user(uint16_t horizontal, uint16_t vertical, bool button) { }
-
-void joystiic_trigger(uint8_t trigger, bool active) {
-  joystiic_trigger_kb(trigger, active);
-  joystiic_trigger_user(trigger, active);
-}
-
-__attribute__ ((weak))
-void joystiic_trigger_kb(uint8_t trigger, bool active) { }
-
-__attribute__ ((weak))
-void joystiic_trigger_user(uint8_t trigger, bool active) { }
-
-void joystiic_trigger_if_not(uint8_t trigger, bool active) {
-  if (joystiic_triggered[trigger] != active) {
-    joystiic_triggered[trigger] = active;
-    joystiic_trigger(trigger, active);
-  }
-}
-
-void joystiic_task(void) {
-  // get horizontal axis
-  joystiic_tx[0] = JOYSTIIC_COMMAND_HORIZONTAL;
-
-  if (MSG_OK != i2c_transmit_receive(JOYSTIIC_DEFAULT_ADDR << 1,
-    joystiic_tx, 1,
-    joystiic_rx_horizontal, 2
-  )) {
-    printf("error hori\n");
-  }
-
-  joystiic_horizontal = ((uint16_t)joystiic_rx_horizontal[0] << 8) | joystiic_rx_horizontal[1];
-
-  joystiic_trigger_if_not(JOYSTIIC_LEFT, joystiic_horizontal > (JOYSTIIC_CENTER + JOYSTIIC_DEADZONE));
-  joystiic_trigger_if_not(JOYSTIIC_RIGHT, joystiic_horizontal < (JOYSTIIC_CENTER - JOYSTIIC_DEADZONE));
-
-  // get vertical axis
-  joystiic_tx[0] = JOYSTIIC_COMMAND_VERTICAL;
-  if (MSG_OK != i2c_transmit_receive(JOYSTIIC_DEFAULT_ADDR << 1,
-    joystiic_tx, 1,
-    joystiic_rx_vertical, 2
-  )) {
-    printf("error vert\n");
-  }
-
-  joystiic_vertical = ((uint16_t)joystiic_rx_vertical[0] << 8) | joystiic_rx_vertical[1];
-
-  joystiic_trigger_if_not(JOYSTIIC_UP, joystiic_vertical > (JOYSTIIC_CENTER + JOYSTIIC_DEADZONE));
-  joystiic_trigger_if_not(JOYSTIIC_DOWN, joystiic_vertical < (JOYSTIIC_CENTER - JOYSTIIC_DEADZONE));
-
-  // get button press
-  joystiic_tx[0] = JOYSTIIC_COMMAND_BUTTON;
-  if (MSG_OK != i2c_transmit_receive(JOYSTIIC_DEFAULT_ADDR << 1,
-    joystiic_tx, 1,
-    joystiic_rx_button, 1
-  )) {
-    printf("error vert\n");
-  }
-
-  joystiic_button = !joystiic_rx_button[0];
-
-  joystiic_trigger_if_not(JOYSTIIC_PRESS, joystiic_button);
-
-  joystiic_update(joystiic_horizontal, joystiic_vertical, joystiic_button);
-
-  //printf("%d\n", joystiic[0]);
-
-  // SEND_STRING("H: ");
-  // send_word(joystiic_rx_horizontal[0]);
-  // tap_code(KC_SPACE);
-  // send_word(joystiic_rx_horizontal[1]);
-  // tap_code(KC_SPACE);
-}

drivers/qwiic/micro_oled.c

@@ -1,469 +0,0 @@
-/* Jim Lindblom @ SparkFun Electronics
- * October 26, 2014
- * https://github.com/sparkfun/Micro_OLED_Breakout/tree/master/Firmware/Arduino/libraries/SFE_MicroOLED
- *
- * Modified by:
- * Emil Varughese @ Edwin Robotics Pvt. Ltd.
- * July 27, 2015
- * https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
- *
- * This code was heavily based around the MicroView library, written by GeekAmmo
- * (https://github.com/geekammo/MicroView-Arduino-Library).
- *
- * Adapted for QMK by:
- * Jack Humbert <jack.humb@gmail.com>
- * October 11, 2018
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#include "micro_oled.h"
-#include <stdlib.h>
-#include "util/font5x7.h"
-#include "util/font8x16.h"
-#include "string.h"
-
-#define TOTALFONTS 2
-const unsigned char * fonts_pointer[]= { font5x7, font8x16 };
-
-uint8_t foreColor,drawMode,fontWidth, fontHeight, fontType, fontStartChar, fontTotalChar, cursorX, cursorY;
-uint16_t fontMapWidth;
-
-#define _BV(x) (1 << (x))
-#define swap(a, b) { uint8_t t = a; a = b; b = t; }
-
-uint8_t micro_oled_transfer_buffer[20];
-static uint8_t micro_oled_screen_current[384] = { 0 };
-static uint8_t micro_oled_screen_buffer[] = {
-/* LCD Memory organised in 64 horizontal pixel and 6 rows of byte
-   B  B .............B  -----
-   y  y .............y        \
-   t  t .............t         \
-   e  e .............e          \
-   0  1 .............63          \
-                                  \
-   D0 D0.............D0            \
-   D1 D1.............D1            / ROW 0
-   D2 D2.............D2           /
-   D3 D3.............D3          /
-   D4 D4.............D4         /
-   D5 D5.............D5        /
-   D6 D6.............D6       /
-   D7 D7.............D7  ----
-  */
-
-// QMK Logo - generated at http://www.majer.ch/lcd/adf_bitmap.php
-
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00,
-0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00,
-0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60, 0x60, 0x60,
-0xF8, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF,
-0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF,
-0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, 0xFE,
-0xFE, 0xF8, 0x60, 0x60, 0x60, 0x60, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x8C, 0x8C, 0x8C, 0x8C, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
-0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00,
-0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x8C, 0x8C, 0x8C, 0x8C,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x31, 0x31, 0x31, 0x31, 0xFF, 0xFF,
-0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xF8, 0xF1, 0xE3, 0xE7, 0xCF,
-0xCF, 0xCF, 0xCF, 0x00, 0x00, 0xCF, 0xCF, 0xCF, 0xC7, 0xE7,
-0xE3, 0xF1, 0xF8, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-0x31, 0x31, 0x31, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06,
-0x06, 0x06, 0x1F, 0x7F, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8, 0xF8, 0xFF,
-0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-0xFF, 0x7F, 0x7F, 0x1F, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00,
-0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00,
-0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00
-};
-
-void micro_oled_init(void) {
-
-  i2c_init();
-  i2c_start(I2C_ADDRESS_SA0_1);
-
-  // Display Init sequence for 64x48 OLED module
-  send_command(DISPLAYOFF);      // 0xAE
-
-  send_command(SETDISPLAYCLOCKDIV);  // 0xD5
-  send_command(0x80);          // the suggested ratio 0x80
-
-  send_command(SETMULTIPLEX);      // 0xA8
-  send_command(0x2F);
-
-  send_command(SETDISPLAYOFFSET);    // 0xD3
-  send_command(0x0);         // no offset
-
-  send_command(SETSTARTLINE | 0x0);  // line #0
-
-  send_command(CHARGEPUMP);      // enable charge pump
-  send_command(0x14);
-
-  send_command(NORMALDISPLAY);     // 0xA6
-  send_command(DISPLAYALLONRESUME);  // 0xA4
-
-  send_command(SEGREMAP | 0x1);
-  send_command(COMSCANDEC);
-
-  send_command(SETCOMPINS);      // 0xDA
-  send_command(0x12);
-
-  send_command(SETCONTRAST);     // 0x81
-  send_command(0x8F);
-
-  send_command(SETPRECHARGE);      // 0xd9
-  send_command(0xF1);
-
-  send_command(SETVCOMDESELECT);     // 0xDB
-  send_command(0x40);
-
-  send_command(DISPLAYON);       //--turn on oled panel
-  clear_screen();           // Erase hardware memory inside the OLED controller to avoid random data in memory.
-  send_buffer();
-}
-
-void send_command(uint8_t command) {
-  micro_oled_transfer_buffer[0] = I2C_COMMAND;
-  micro_oled_transfer_buffer[1] = command;
-  i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100);
-}
-
-void send_data(uint8_t data) {
-  micro_oled_transfer_buffer[0] = I2C_DATA;
-  micro_oled_transfer_buffer[1] = data;
-  i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100);
-}
-
-/** \brief Set SSD1306 page address.
-    Send page address command and address to the SSD1306 OLED controller.
-*/
-void set_page_address(uint8_t address) {
-  address = (0xB0 | address);
-  send_command(address);
-}
-
-/** \brief Set SSD1306 column address.
-    Send column address command and address to the SSD1306 OLED controller.
-*/
-void set_column_address(uint8_t address) {
-  send_command( ( 0x10 | (address >> 4) ) + 0x02 );
-  send_command( 0x0f & address );
-}
-
-/** \brief Clear SSD1306's memory.
-    To clear GDRAM inside the LCD controller.
-*/
-void clear_screen(void) {
-  for (int i=0;i<8; i++) {
-    set_page_address(i);
-    set_column_address(0);
-    for (int j=0; j<0x80; j++) {
-      send_data(0);
-    }
-  }
-}
-
-/** \brief Clear SSD1306's memory.
-    To clear GDRAM inside the LCD controller.
-*/
-void clear_buffer(void) {
-  memset(micro_oled_screen_buffer, 0, 384);
-}
-
-/** \brief Invert display.
-    The PIXEL_ON color of the display will turn to PIXEL_OFF and the PIXEL_OFF will turn to PIXEL_ON.
-*/
-void invert_screen(bool invert) {
-  if (invert) {
-    send_command(INVERTDISPLAY);
-  } else {
-    send_command(NORMALDISPLAY);
-  }
-}
-
-/** \brief Set contrast.
-    OLED contract value from 0 to 255. Note: Contrast level is not very obvious.
-*/
-void set_contrast(uint8_t contrast) {
-  send_command(SETCONTRAST);     // 0x81
-  send_command(contrast);
-}
-
-/** \brief Transfer display buffer.
-  Sends the updated buffer to the controller - the current status is checked before to save i2c exectution time
-*/
-void send_buffer(void) {
-  uint8_t i, j;
-
-  uint8_t page_addr = 0xFF;
-  for (i = 0; i < 6; i++) {
-    uint8_t col_addr = 0xFF;
-    for (j = 0; j < 0x40; j++) {
-      if (micro_oled_screen_buffer[i*0x40+j] != micro_oled_screen_current[i*0x40+j]) {
-        if (page_addr != i) {
-          set_page_address(i);
-        }
-        if (col_addr != j) {
-          set_column_address(j);
-        }
-        send_data(micro_oled_screen_buffer[i*0x40+j]);
-        micro_oled_screen_current[i*0x40+j] = micro_oled_screen_buffer[i*0x40+j];
-        col_addr = j + 1;
-      }
-    }
-  }
-}
-
-/** \brief Draw pixel with color and mode.
-  Draw color pixel in the screen buffer's x,y position with NORM or XOR draw mode.
-*/
-void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode) {
-  if ((x<0) ||  (x>=LCDWIDTH) || (y<0) || (y>=LCDHEIGHT))
-    return;
-
-  if (mode == XOR) {
-    if (color == PIXEL_ON)
-      micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] ^= _BV((y%8));
-  } else {
-    if (color == PIXEL_ON)
-      micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] |= _BV((y%8));
-    else
-      micro_oled_screen_buffer[x + (y/8)*LCDWIDTH] &= ~_BV((y%8));
-  }
-}
-
-/** \brief Draw line with color and mode.
-Draw line using color and mode from x0,y0 to x1,y1 of the screen buffer.
-*/
-void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode) {
-  uint8_t steep = abs(y1 - y0) > abs(x1 - x0);
-  if (steep) {
-    swap(x0, y0);
-    swap(x1, y1);
-  }
-
-  if (x0 > x1) {
-    swap(x0, x1);
-    swap(y0, y1);
-  }
-
-  uint8_t dx, dy;
-  dx = x1 - x0;
-  dy = abs(y1 - y0);
-
-  int8_t err = dx / 2;
-  int8_t ystep;
-
-  if (y0 < y1) {
-    ystep = 1;
-  } else {
-    ystep = -1;}
-
-  for (; x0<x1; x0++) {
-    if (steep) {
-      draw_pixel(y0, x0, color, mode);
-    } else {
-      draw_pixel(x0, y0, color, mode);
-    }
-    err -= dy;
-    if (err < 0) {
-      y0 += ystep;
-      err += dx;
-    }
-  }
-}
-
-/** \brief Draw horizontal line with color and mode.
-Draw horizontal line using color and mode from x,y to x+width,y of the screen buffer.
-*/
-void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode) {
-  draw_line(x,y,x+width,y,color,mode);
-}
-
-/** \brief Draw vertical line.
-Draw vertical line using current fore color and current draw mode from x,y to x,y+height of the screen buffer.
-*/
-void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode) {
-  draw_line(x,y,x,y+height,color,mode);
-}
-
-/** \brief Draw rectangle with color and mode.
-Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
-*/
-void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
-  uint8_t tempHeight;
-
-  draw_line_hori(x,y, width, color, mode);
-  draw_line_hori(x,y+height-1, width, color, mode);
-
-  tempHeight=height-2;
-
-  // skip drawing vertical lines to avoid overlapping of pixel that will
-  // affect XOR plot if no pixel in between horizontal lines
-  if (tempHeight<1) return;
-
-  draw_line_vert(x,y+1, tempHeight, color, mode);
-  draw_line_vert(x+width-1, y+1, tempHeight, color, mode);
-}
-
-/** \brief Draw rectangle with color and mode.
-Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
-*/
-void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
-  uint8_t tempHeight;
-
-  draw_line_hori(x+1,y, width-2, color, mode);
-  draw_line_hori(x+1,y+height-1, width-2, color, mode);
-
-  tempHeight=height-2;
-
-  // skip drawing vertical lines to avoid overlapping of pixel that will
-  // affect XOR plot if no pixel in between horizontal lines
-  if (tempHeight<1) return;
-
-  draw_line_vert(x,y+1, tempHeight, color, mode);
-  draw_line_vert(x+width-1, y+1, tempHeight, color, mode);
-}
-
-/** \brief Draw filled rectangle with color and mode.
-Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
-*/
-void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
-  // TODO - need to optimise the memory map draw so that this function will not call pixel one by one
-  for (int i=x; i<x+width;i++) {
-    draw_line_vert(i,y, height, color, mode);
-  }
-}
-
-/** \brief Draw filled rectangle with color and mode.
-Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer.
-*/
-void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) {
-  // TODO - need to optimise the memory map draw so that this function will not call pixel one by one
-  for (int i=x; i<x+width;i++) {
-    if (i == x || i == (x + width - 1))
-      draw_line_vert(i, y+1, height-2, color, mode);
-    else
-      draw_line_vert(i, y, height, color, mode);
-  }
-}
-
-/** \brief Draw character with color and mode.
-  Draw character c using color and draw mode at x,y.
-*/
-void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font) {
-  // TODO - New routine to take font of any height, at the moment limited to font height in multiple of 8 pixels
-
-  uint8_t rowsToDraw,row, tempC;
-  uint8_t i,j,temp;
-  uint16_t charPerBitmapRow,charColPositionOnBitmap,charRowPositionOnBitmap,charBitmapStartPosition;
-
-  if ((font>=TOTALFONTS) || (font<0))
-    return;
-
-  uint8_t fontType = font;
-  uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType]+0);
-  uint8_t fontHeight = pgm_read_byte(fonts_pointer[fontType]+1);
-  uint8_t fontStartChar = pgm_read_byte(fonts_pointer[fontType]+2);
-  uint8_t fontTotalChar = pgm_read_byte(fonts_pointer[fontType]+3);
-  uint16_t fontMapWidth = (pgm_read_byte(fonts_pointer[fontType]+4)*100)+pgm_read_byte(fonts_pointer[fontType]+5); // two bytes values into integer 16
-
-  if ((c<fontStartChar) || (c>(fontStartChar+fontTotalChar-1)))   // no bitmap for the required c
-    return;
-
-  tempC=c-fontStartChar;
-
-  // each row (in datasheet is call page) is 8 bits high, 16 bit high character will have 2 rows to be drawn
-  rowsToDraw=fontHeight/8;  // 8 is LCD's page size, see SSD1306 datasheet
-  if (rowsToDraw<=1) rowsToDraw=1;
-
-  // the following draw function can draw anywhere on the screen, but SLOW pixel by pixel draw
-  if (rowsToDraw==1) {
-    for  (i=0;i<fontWidth+1;i++) {
-      if (i==fontWidth) // this is done in a weird way because for 5x7 font, there is no margin, this code add a margin after col 5
-      temp=0;
-      else
-      temp=pgm_read_byte(fonts_pointer[fontType]+FONTHEADERSIZE+(tempC*fontWidth)+i);
-
-      for (j=0;j<8;j++) {     // 8 is the LCD's page height (see datasheet for explanation)
-        if (temp & 0x1) {
-          draw_pixel(x+i, y+j, color,mode);
-        }
-        else {
-          draw_pixel(x+i, y+j, !color,mode);
-        }
-
-        temp >>=1;
-      }
-    }
-    return;
-  }
-
-  // font height over 8 bit
-  // take character "0" ASCII 48 as example
-  charPerBitmapRow = fontMapWidth/fontWidth;  // 256/8 =32 char per row
-  charColPositionOnBitmap = tempC % charPerBitmapRow;  // =16
-  charRowPositionOnBitmap = (int)(tempC/charPerBitmapRow); // =1
-  charBitmapStartPosition = (charRowPositionOnBitmap * fontMapWidth * (fontHeight/8)) + (charColPositionOnBitmap * fontWidth) ;
-
-  // each row on LCD is 8 bit height (see datasheet for explanation)
-  for(row=0;row<rowsToDraw;row++) {
-    for (i=0; i<fontWidth;i++) {
-      temp=pgm_read_byte(fonts_pointer[fontType]+FONTHEADERSIZE+(charBitmapStartPosition+i+(row*fontMapWidth)));
-      for (j=0;j<8;j++) {     // 8 is the LCD's page height (see datasheet for explanation)
-        if (temp & 0x1) {
-          draw_pixel(x+i,y+j+(row*8), color, mode);
-        }
-        else {
-          draw_pixel(x+i,y+j+(row*8), !color, mode);
-        }
-        temp >>=1;
-      }
-    }
-  }
-
-}
-
-void draw_string(uint8_t x, uint8_t y, char * string, uint8_t color, uint8_t mode, uint8_t font) {
-
-  if ((font>=TOTALFONTS) || (font<0))
-    return;
-
-  uint8_t fontType = font;
-  uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType]+0);
-
-  uint8_t cur_x = x;
-  for (int i = 0; i < strlen(string); i++) {
-    draw_char(cur_x, y, string[i], color, mode, font);
-    cur_x += fontWidth + 1;
-  }
-
-}

drivers/qwiic/micro_oled.h

@@ -1,129 +0,0 @@
-/* Jim Lindblom @ SparkFun Electronics
- * October 26, 2014
- * https://github.com/sparkfun/Micro_OLED_Breakout/tree/master/Firmware/Arduino/libraries/SFE_MicroOLED
- *
- * Modified by:
- * Emil Varughese @ Edwin Robotics Pvt. Ltd.
- * July 27, 2015
- * https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
- *
- * This code was heavily based around the MicroView library, written by GeekAmmo
- * (https://github.com/geekammo/MicroView-Arduino-Library).
- *
- * Adapted for QMK by:
- * Jack Humbert <jack.humb@gmail.com>
- * October 11, 2018
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#pragma once
-
-#include "qwiic.h"
-
-void micro_oled_init(void);
-
-void send_command(uint8_t command);
-void send_data(uint8_t data);
-void set_page_address(uint8_t address);
-void set_column_address(uint8_t address);
-void clear_screen(void);
-void clear_buffer(void);
-void send_buffer(void);
-void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode);
-void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode);
-void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode);
-void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode);
-void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
-void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
-void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
-void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode);
-void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font);
-void draw_string(uint8_t x, uint8_t y, char * string, uint8_t color, uint8_t mode, uint8_t font);
-
-#define I2C_ADDRESS_SA0_0 0b0111100
-#define I2C_ADDRESS_SA0_1 0b0111101
-#define I2C_COMMAND 0x00
-#define I2C_DATA 0x40
-
-#define PIXEL_OFF 0
-#define PIXEL_ON  1
-
-#define LCDWIDTH      64
-#define LCDHEIGHT     48
-#define FONTHEADERSIZE    6
-
-#define NORM        0
-#define XOR         1
-
-#define PAGE        0
-#define ALL         1
-
-#define WIDGETSTYLE0      0
-#define WIDGETSTYLE1      1
-#define WIDGETSTYLE2      2
-
-#define SETCONTRAST     0x81
-#define DISPLAYALLONRESUME  0xA4
-#define DISPLAYALLON    0xA5
-#define NORMALDISPLAY     0xA6
-#define INVERTDISPLAY     0xA7
-#define DISPLAYOFF      0xAE
-#define DISPLAYON       0xAF
-#define SETDISPLAYOFFSET  0xD3
-#define SETCOMPINS      0xDA
-#define SETVCOMDESELECT   0xDB
-#define SETDISPLAYCLOCKDIV  0xD5
-#define SETPRECHARGE    0xD9
-#define SETMULTIPLEX    0xA8
-#define SETLOWCOLUMN    0x00
-#define SETHIGHCOLUMN     0x10
-#define SETSTARTLINE    0x40
-#define MEMORYMODE      0x20
-#define COMSCANINC      0xC0
-#define COMSCANDEC      0xC8
-#define SEGREMAP      0xA0
-#define CHARGEPUMP      0x8D
-#define EXTERNALVCC     0x01
-#define SWITCHCAPVCC    0x02
-
-// Scroll
-#define ACTIVATESCROLL          0x2F
-#define DEACTIVATESCROLL        0x2E
-#define SETVERTICALSCROLLAREA       0xA3
-#define RIGHTHORIZONTALSCROLL       0x26
-#define LEFT_HORIZONTALSCROLL       0x27
-#define VERTICALRIGHTHORIZONTALSCROLL 0x29
-#define VERTICALLEFTHORIZONTALSCROLL  0x2A
-
-typedef enum CMD {
-  CMD_CLEAR,      //0
-  CMD_INVERT,     //1
-  CMD_CONTRAST,   //2
-  CMD_DISPLAY,    //3
-  CMD_SETCURSOR,    //4
-  CMD_PIXEL,      //5
-  CMD_LINE,     //6
-  CMD_LINEH,      //7
-  CMD_LINEV,      //8
-  CMD_RECT,     //9
-  CMD_RECTFILL,   //10
-  CMD_CIRCLE,     //11
-  CMD_CIRCLEFILL,   //12
-  CMD_DRAWCHAR,   //13
-  CMD_DRAWBITMAP,   //14
-  CMD_GETLCDWIDTH,  //15
-  CMD_GETLCDHEIGHT, //16
-  CMD_SETCOLOR,   //17
-  CMD_SETDRAWMODE   //18
-} commCommand_t;

drivers/qwiic/qwiic.mk

@@ -1,18 +0,0 @@
-ifneq ($(strip $(QWIIC_ENABLE)),)
-  COMMON_VPATH += $(DRIVER_PATH)/qwiic
-  OPT_DEFS += -DQWIIC_ENABLE
-  SRC += qwiic.c
-  ifeq ($(filter "i2c_master.c", $(SRC)),)
-    SRC += i2c_master.c
-  endif
-endif
-
-ifneq ($(filter JOYSTIIC, $(QWIIC_ENABLE)),)
-  OPT_DEFS += -DQWIIC_JOYSTIIC_ENABLE
-  SRC += joystiic.c
-endif
-
-ifneq ($(filter MICRO_OLED, $(QWIIC_ENABLE)),)
-  OPT_DEFS += -DQWIIC_MICRO_OLED_ENABLE
-  SRC += micro_oled.c
-endif

drivers/qwiic/readme.md

@@ -1,7 +0,0 @@
-# Qwiic Devices
-
-[More info on Sparkfun's Qwiic Connect System](https://www.sparkfun.com/qwiic)
-
-Currently supported devices:
-
-* [Joystiic](https://www.sparkfun.com/products/14656)

drivers/qwiic/util/font5x7.h

@@ -1,288 +0,0 @@
-/******************************************************************************
-font5x7.h
-Definition for small font
-
-This file was imported from the MicroView library, written by GeekAmmo
-(https://github.com/geekammo/MicroView-Arduino-Library), and released under
-the terms of the GNU General Public License as published by the Free Software
-Foundation, either version 3 of the License, or (at your option) any later
-version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-Modified by:
-Emil Varughese @ Edwin Robotics Pvt. Ltd.
-July 27, 2015
-https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
-
-******************************************************************************/
-#pragma once
-
-#include "progmem.h"
-
-// Standard ASCII 5x7 font
-static const unsigned char font5x7[] PROGMEM = {
-    // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256)
-    5,8,0,255,12,75,
-    0x00, 0x00, 0x00, 0x00, 0x00,
-    0x3E, 0x5B, 0x4F, 0x5B, 0x3E,
-    0x3E, 0x6B, 0x4F, 0x6B, 0x3E,
-    0x1C, 0x3E, 0x7C, 0x3E, 0x1C,
-    0x18, 0x3C, 0x7E, 0x3C, 0x18,
-    0x1C, 0x57, 0x7D, 0x57, 0x1C,
-    0x1C, 0x5E, 0x7F, 0x5E, 0x1C,
-    0x00, 0x18, 0x3C, 0x18, 0x00,
-    0xFF, 0xE7, 0xC3, 0xE7, 0xFF,
-    0x00, 0x18, 0x24, 0x18, 0x00,
-    0xFF, 0xE7, 0xDB, 0xE7, 0xFF,
-    0x30, 0x48, 0x3A, 0x06, 0x0E,
-    0x26, 0x29, 0x79, 0x29, 0x26,
-    0x40, 0x7F, 0x05, 0x05, 0x07,
-    0x40, 0x7F, 0x05, 0x25, 0x3F,
-    0x5A, 0x3C, 0xE7, 0x3C, 0x5A,
-    0x7F, 0x3E, 0x1C, 0x1C, 0x08,
-    0x08, 0x1C, 0x1C, 0x3E, 0x7F,
-    0x14, 0x22, 0x7F, 0x22, 0x14,
-    0x5F, 0x5F, 0x00, 0x5F, 0x5F,
-    0x06, 0x09, 0x7F, 0x01, 0x7F,
-    0x00, 0x66, 0x89, 0x95, 0x6A,
-    0x60, 0x60, 0x60, 0x60, 0x60,
-    0x94, 0xA2, 0xFF, 0xA2, 0x94,
-    0x08, 0x04, 0x7E, 0x04, 0x08,
-    0x10, 0x20, 0x7E, 0x20, 0x10,
-    0x08, 0x08, 0x2A, 0x1C, 0x08,
-    0x08, 0x1C, 0x2A, 0x08, 0x08,
-    0x1E, 0x10, 0x10, 0x10, 0x10,
-    0x0C, 0x1E, 0x0C, 0x1E, 0x0C,
-    0x30, 0x38, 0x3E, 0x38, 0x30,
-    0x06, 0x0E, 0x3E, 0x0E, 0x06,
-    0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x5F, 0x00, 0x00,
-    0x00, 0x07, 0x00, 0x07, 0x00,
-    0x14, 0x7F, 0x14, 0x7F, 0x14,
-    0x24, 0x2A, 0x7F, 0x2A, 0x12,
-    0x23, 0x13, 0x08, 0x64, 0x62,
-    0x36, 0x49, 0x56, 0x20, 0x50,
-    0x00, 0x08, 0x07, 0x03, 0x00,
-    0x00, 0x1C, 0x22, 0x41, 0x00,
-    0x00, 0x41, 0x22, 0x1C, 0x00,
-    0x2A, 0x1C, 0x7F, 0x1C, 0x2A,
-    0x08, 0x08, 0x3E, 0x08, 0x08,
-    0x00, 0x80, 0x70, 0x30, 0x00,
-    0x08, 0x08, 0x08, 0x08, 0x08,
-    0x00, 0x00, 0x60, 0x60, 0x00,
-    0x20, 0x10, 0x08, 0x04, 0x02,
-    0x3E, 0x51, 0x49, 0x45, 0x3E,
-    0x00, 0x42, 0x7F, 0x40, 0x00,
-    0x72, 0x49, 0x49, 0x49, 0x46,
-    0x21, 0x41, 0x49, 0x4D, 0x33,
-    0x18, 0x14, 0x12, 0x7F, 0x10,
-    0x27, 0x45, 0x45, 0x45, 0x39,
-    0x3C, 0x4A, 0x49, 0x49, 0x31,
-    0x41, 0x21, 0x11, 0x09, 0x07,
-    0x36, 0x49, 0x49, 0x49, 0x36,
-    0x46, 0x49, 0x49, 0x29, 0x1E,
-    0x00, 0x00, 0x14, 0x00, 0x00,
-    0x00, 0x40, 0x34, 0x00, 0x00,
-    0x00, 0x08, 0x14, 0x22, 0x41,
-    0x14, 0x14, 0x14, 0x14, 0x14,
-    0x00, 0x41, 0x22, 0x14, 0x08,
-    0x02, 0x01, 0x59, 0x09, 0x06,
-    0x3E, 0x41, 0x5D, 0x59, 0x4E,
-    0x7C, 0x12, 0x11, 0x12, 0x7C,
-    0x7F, 0x49, 0x49, 0x49, 0x36,
-    0x3E, 0x41, 0x41, 0x41, 0x22,
-    0x7F, 0x41, 0x41, 0x41, 0x3E,
-    0x7F, 0x49, 0x49, 0x49, 0x41,
-    0x7F, 0x09, 0x09, 0x09, 0x01,
-    0x3E, 0x41, 0x41, 0x51, 0x73,
-    0x7F, 0x08, 0x08, 0x08, 0x7F,
-    0x00, 0x41, 0x7F, 0x41, 0x00,
-    0x20, 0x40, 0x41, 0x3F, 0x01,
-    0x7F, 0x08, 0x14, 0x22, 0x41,
-    0x7F, 0x40, 0x40, 0x40, 0x40,
-    0x7F, 0x02, 0x1C, 0x02, 0x7F,
-    0x7F, 0x04, 0x08, 0x10, 0x7F,
-    0x3E, 0x41, 0x41, 0x41, 0x3E,
-    0x7F, 0x09, 0x09, 0x09, 0x06,
-    0x3E, 0x41, 0x51, 0x21, 0x5E,
-    0x7F, 0x09, 0x19, 0x29, 0x46,
-    0x26, 0x49, 0x49, 0x49, 0x32,
-    0x03, 0x01, 0x7F, 0x01, 0x03,
-    0x3F, 0x40, 0x40, 0x40, 0x3F,
-    0x1F, 0x20, 0x40, 0x20, 0x1F,
-    0x3F, 0x40, 0x38, 0x40, 0x3F,
-    0x63, 0x14, 0x08, 0x14, 0x63,
-    0x03, 0x04, 0x78, 0x04, 0x03,
-    0x61, 0x59, 0x49, 0x4D, 0x43,
-    0x00, 0x7F, 0x41, 0x41, 0x41,
-    0x02, 0x04, 0x08, 0x10, 0x20,
-    0x00, 0x41, 0x41, 0x41, 0x7F,
-    0x04, 0x02, 0x01, 0x02, 0x04,
-    0x40, 0x40, 0x40, 0x40, 0x40,
-    0x00, 0x03, 0x07, 0x08, 0x00,
-    0x20, 0x54, 0x54, 0x78, 0x40,
-    0x7F, 0x28, 0x44, 0x44, 0x38,
-    0x38, 0x44, 0x44, 0x44, 0x28,
-    0x38, 0x44, 0x44, 0x28, 0x7F,
-    0x38, 0x54, 0x54, 0x54, 0x18,
-    0x00, 0x08, 0x7E, 0x09, 0x02,
-    0x18, 0xA4, 0xA4, 0x9C, 0x78,
-    0x7F, 0x08, 0x04, 0x04, 0x78,
-    0x00, 0x44, 0x7D, 0x40, 0x00,
-    0x20, 0x40, 0x40, 0x3D, 0x00,
-    0x7F, 0x10, 0x28, 0x44, 0x00,
-    0x00, 0x41, 0x7F, 0x40, 0x00,
-    0x7C, 0x04, 0x78, 0x04, 0x78,
-    0x7C, 0x08, 0x04, 0x04, 0x78,
-    0x38, 0x44, 0x44, 0x44, 0x38,
-    0xFC, 0x18, 0x24, 0x24, 0x18,
-    0x18, 0x24, 0x24, 0x18, 0xFC,
-    0x7C, 0x08, 0x04, 0x04, 0x08,
-    0x48, 0x54, 0x54, 0x54, 0x24,
-    0x04, 0x04, 0x3F, 0x44, 0x24,
-    0x3C, 0x40, 0x40, 0x20, 0x7C,
-    0x1C, 0x20, 0x40, 0x20, 0x1C,
-    0x3C, 0x40, 0x30, 0x40, 0x3C,
-    0x44, 0x28, 0x10, 0x28, 0x44,
-    0x4C, 0x90, 0x90, 0x90, 0x7C,
-    0x44, 0x64, 0x54, 0x4C, 0x44,
-    0x00, 0x08, 0x36, 0x41, 0x00,
-    0x00, 0x00, 0x77, 0x00, 0x00,
-    0x00, 0x41, 0x36, 0x08, 0x00,
-    0x02, 0x01, 0x02, 0x04, 0x02,
-    0x3C, 0x26, 0x23, 0x26, 0x3C,
-    0x1E, 0xA1, 0xA1, 0x61, 0x12,
-    0x3A, 0x40, 0x40, 0x20, 0x7A,
-    0x38, 0x54, 0x54, 0x55, 0x59,
-    0x21, 0x55, 0x55, 0x79, 0x41,
-    0x21, 0x54, 0x54, 0x78, 0x41,
-    0x21, 0x55, 0x54, 0x78, 0x40,
-    0x20, 0x54, 0x55, 0x79, 0x40,
-    0x0C, 0x1E, 0x52, 0x72, 0x12,
-    0x39, 0x55, 0x55, 0x55, 0x59,
-    0x39, 0x54, 0x54, 0x54, 0x59,
-    0x39, 0x55, 0x54, 0x54, 0x58,
-    0x00, 0x00, 0x45, 0x7C, 0x41,
-    0x00, 0x02, 0x45, 0x7D, 0x42,
-    0x00, 0x01, 0x45, 0x7C, 0x40,
-    0xF0, 0x29, 0x24, 0x29, 0xF0,
-    0xF0, 0x28, 0x25, 0x28, 0xF0,
-    0x7C, 0x54, 0x55, 0x45, 0x00,
-    0x20, 0x54, 0x54, 0x7C, 0x54,
-    0x7C, 0x0A, 0x09, 0x7F, 0x49,
-    0x32, 0x49, 0x49, 0x49, 0x32,
-    0x32, 0x48, 0x48, 0x48, 0x32,
-    0x32, 0x4A, 0x48, 0x48, 0x30,
-    0x3A, 0x41, 0x41, 0x21, 0x7A,
-    0x3A, 0x42, 0x40, 0x20, 0x78,
-    0x00, 0x9D, 0xA0, 0xA0, 0x7D,
-    0x39, 0x44, 0x44, 0x44, 0x39,
-    0x3D, 0x40, 0x40, 0x40, 0x3D,
-    0x3C, 0x24, 0xFF, 0x24, 0x24,
-    0x48, 0x7E, 0x49, 0x43, 0x66,
-    0x2B, 0x2F, 0xFC, 0x2F, 0x2B,
-    0xFF, 0x09, 0x29, 0xF6, 0x20,
-    0xC0, 0x88, 0x7E, 0x09, 0x03,
-    0x20, 0x54, 0x54, 0x79, 0x41,
-    0x00, 0x00, 0x44, 0x7D, 0x41,
-    0x30, 0x48, 0x48, 0x4A, 0x32,
-    0x38, 0x40, 0x40, 0x22, 0x7A,
-    0x00, 0x7A, 0x0A, 0x0A, 0x72,
-    0x7D, 0x0D, 0x19, 0x31, 0x7D,
-    0x26, 0x29, 0x29, 0x2F, 0x28,
-    0x26, 0x29, 0x29, 0x29, 0x26,
-    0x30, 0x48, 0x4D, 0x40, 0x20,
-    0x38, 0x08, 0x08, 0x08, 0x08,
-    0x08, 0x08, 0x08, 0x08, 0x38,
-    0x2F, 0x10, 0xC8, 0xAC, 0xBA,
-    0x2F, 0x10, 0x28, 0x34, 0xFA,
-    0x00, 0x00, 0x7B, 0x00, 0x00,
-    0x08, 0x14, 0x2A, 0x14, 0x22,
-    0x22, 0x14, 0x2A, 0x14, 0x08,
-    0xAA, 0x00, 0x55, 0x00, 0xAA,
-    0xAA, 0x55, 0xAA, 0x55, 0xAA,
-    0x00, 0x00, 0x00, 0xFF, 0x00,
-    0x10, 0x10, 0x10, 0xFF, 0x00,
-    0x14, 0x14, 0x14, 0xFF, 0x00,
-    0x10, 0x10, 0xFF, 0x00, 0xFF,
-    0x10, 0x10, 0xF0, 0x10, 0xF0,
-    0x14, 0x14, 0x14, 0xFC, 0x00,
-    0x14, 0x14, 0xF7, 0x00, 0xFF,
-    0x00, 0x00, 0xFF, 0x00, 0xFF,
-    0x14, 0x14, 0xF4, 0x04, 0xFC,
-    0x14, 0x14, 0x17, 0x10, 0x1F,
-    0x10, 0x10, 0x1F, 0x10, 0x1F,
-    0x14, 0x14, 0x14, 0x1F, 0x00,
-    0x10, 0x10, 0x10, 0xF0, 0x00,
-    0x00, 0x00, 0x00, 0x1F, 0x10,
-    0x10, 0x10, 0x10, 0x1F, 0x10,
-    0x10, 0x10, 0x10, 0xF0, 0x10,
-    0x00, 0x00, 0x00, 0xFF, 0x10,
-    0x10, 0x10, 0x10, 0x10, 0x10,
-    0x10, 0x10, 0x10, 0xFF, 0x10,
-    0x00, 0x00, 0x00, 0xFF, 0x14,
-    0x00, 0x00, 0xFF, 0x00, 0xFF,
-    0x00, 0x00, 0x1F, 0x10, 0x17,
-    0x00, 0x00, 0xFC, 0x04, 0xF4,
-    0x14, 0x14, 0x17, 0x10, 0x17,
-    0x14, 0x14, 0xF4, 0x04, 0xF4,
-    0x00, 0x00, 0xFF, 0x00, 0xF7,
-    0x14, 0x14, 0x14, 0x14, 0x14,
-    0x14, 0x14, 0xF7, 0x00, 0xF7,
-    0x14, 0x14, 0x14, 0x17, 0x14,
-    0x10, 0x10, 0x1F, 0x10, 0x1F,
-    0x14, 0x14, 0x14, 0xF4, 0x14,
-    0x10, 0x10, 0xF0, 0x10, 0xF0,
-    0x00, 0x00, 0x1F, 0x10, 0x1F,
-    0x00, 0x00, 0x00, 0x1F, 0x14,
-    0x00, 0x00, 0x00, 0xFC, 0x14,
-    0x00, 0x00, 0xF0, 0x10, 0xF0,
-    0x10, 0x10, 0xFF, 0x10, 0xFF,
-    0x14, 0x14, 0x14, 0xFF, 0x14,
-    0x10, 0x10, 0x10, 0x1F, 0x00,
-    0x00, 0x00, 0x00, 0xF0, 0x10,
-    0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-    0xF0, 0xF0, 0xF0, 0xF0, 0xF0,
-    0xFF, 0xFF, 0xFF, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0xFF, 0xFF,
-    0x0F, 0x0F, 0x0F, 0x0F, 0x0F,
-    0x38, 0x44, 0x44, 0x38, 0x44,
-    0x7C, 0x2A, 0x2A, 0x3E, 0x14,
-    0x7E, 0x02, 0x02, 0x06, 0x06,
-    0x02, 0x7E, 0x02, 0x7E, 0x02,
-    0x63, 0x55, 0x49, 0x41, 0x63,
-    0x38, 0x44, 0x44, 0x3C, 0x04,
-    0x40, 0x7E, 0x20, 0x1E, 0x20,
-    0x06, 0x02, 0x7E, 0x02, 0x02,
-    0x99, 0xA5, 0xE7, 0xA5, 0x99,
-    0x1C, 0x2A, 0x49, 0x2A, 0x1C,
-    0x4C, 0x72, 0x01, 0x72, 0x4C,
-    0x30, 0x4A, 0x4D, 0x4D, 0x30,
-    0x30, 0x48, 0x78, 0x48, 0x30,
-    0xBC, 0x62, 0x5A, 0x46, 0x3D,
-    0x3E, 0x49, 0x49, 0x49, 0x00,
-    0x7E, 0x01, 0x01, 0x01, 0x7E,
-    0x2A, 0x2A, 0x2A, 0x2A, 0x2A,
-    0x44, 0x44, 0x5F, 0x44, 0x44,
-    0x40, 0x51, 0x4A, 0x44, 0x40,
-    0x40, 0x44, 0x4A, 0x51, 0x40,
-    0x00, 0x00, 0xFF, 0x01, 0x03,
-    0xE0, 0x80, 0xFF, 0x00, 0x00,
-    0x08, 0x08, 0x6B, 0x6B, 0x08,
-    0x36, 0x12, 0x36, 0x24, 0x36,
-    0x06, 0x0F, 0x09, 0x0F, 0x06,
-    0x00, 0x00, 0x18, 0x18, 0x00,
-    0x00, 0x00, 0x10, 0x10, 0x00,
-    0x30, 0x40, 0xFF, 0x01, 0x01,
-    0x00, 0x1F, 0x01, 0x01, 0x1E,
-    0x00, 0x19, 0x1D, 0x17, 0x12,
-    0x00, 0x3C, 0x3C, 0x3C, 0x3C,
-    0x00, 0x00, 0x00, 0x00, 0x00
-};

drivers/qwiic/util/font8x16.h

@@ -1,127 +0,0 @@
-/******************************************************************************
-font8x16.h
-Definition for medium font
-
-This file was imported from the MicroView library, written by GeekAmmo
-(https://github.com/geekammo/MicroView-Arduino-Library), and released under
-the terms of the GNU General Public License as published by the Free Software
-Foundation, either version 3 of the License, or (at your option) any later
-version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-Modified by:
-Emil Varughese @ Edwin Robotics Pvt. Ltd.
-July 27, 2015
-https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/
-******************************************************************************/
-#pragma once
-
-#include "progmem.h"
-
-static const unsigned char font8x16[] PROGMEM = {
-    // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256)
-    8,16,32,96,2,56,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x0E, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x00, 0xD0, 0xBE, 0x90, 0xD0, 0xBE, 0x90, 0x00,
-    0x00, 0x1C, 0x62, 0xFF, 0xC2, 0x80, 0x00, 0x00, 0x0C, 0x12, 0x92, 0x4C, 0xB0, 0x88, 0x06, 0x00,
-    0x80, 0x7C, 0x62, 0xB2, 0x1C, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x0E, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0xE0, 0x18, 0x04, 0x02, 0x02, 0x00, 0x00, 0x00, 0x02, 0x02, 0x04, 0x18, 0xE0, 0x00, 0x00,
-    0x00, 0x24, 0x18, 0x7E, 0x18, 0x24, 0x00, 0x00, 0x80, 0x80, 0x80, 0xF0, 0x80, 0x80, 0x80, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x60, 0x18, 0x06, 0x00, 0x00,
-    0xF8, 0x04, 0xC2, 0x32, 0x0C, 0xF8, 0x00, 0x00, 0x00, 0x04, 0x04, 0xFE, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00, 0x00, 0x02, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00,
-    0xC0, 0xA0, 0x98, 0x84, 0xFE, 0x80, 0x80, 0x00, 0x00, 0x1E, 0x12, 0x12, 0x22, 0xC2, 0x00, 0x00,
-    0xF8, 0x44, 0x22, 0x22, 0x22, 0xC0, 0x00, 0x00, 0x00, 0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00,
-    0x00, 0x8C, 0x52, 0x22, 0x52, 0x8C, 0x00, 0x00, 0x3C, 0x42, 0x42, 0x42, 0x26, 0xF8, 0x00, 0x00,
-    0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00,
-    0x80, 0x80, 0x40, 0x40, 0x20, 0x20, 0x10, 0x00, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x00,
-    0x10, 0x20, 0x20, 0x40, 0x40, 0x80, 0x80, 0x00, 0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00,
-    0x00, 0x04, 0x04, 0x0F, 0x04, 0x03, 0x00, 0x00, 0x04, 0x02, 0x01, 0x03, 0x04, 0x04, 0x03, 0x00,
-    0x03, 0x04, 0x04, 0x04, 0x05, 0x03, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x03, 0x06, 0x08, 0x10, 0x10, 0x00, 0x00, 0x00, 0x10, 0x10, 0x08, 0x06, 0x03, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x01, 0x03, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00,
-    0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
-    0x01, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00,
-    0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x01, 0x01, 0x02, 0x02, 0x04, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00,
-    0x04, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0xF8, 0x04, 0x72, 0x8A, 0xFA, 0x84, 0x78, 0x00, 0x00, 0xC0, 0x38, 0x06, 0x38, 0xC0, 0x00, 0x00,
-    0x00, 0xFE, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00,
-    0xFE, 0x02, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, 0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00,
-    0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x22, 0xE2, 0x00, 0x00,
-    0xFE, 0x20, 0x20, 0x20, 0x20, 0xFE, 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0xFE, 0x40, 0xB0, 0x08, 0x04, 0x02, 0x00, 0x00,
-    0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x0C, 0x70, 0x80, 0x70, 0x0C, 0xFE, 0x00,
-    0xFE, 0x0C, 0x30, 0xC0, 0x00, 0xFE, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00,
-    0xFE, 0x42, 0x42, 0x42, 0x22, 0x1C, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00,
-    0x00, 0xFE, 0x42, 0x42, 0xA2, 0x1C, 0x00, 0x00, 0x00, 0x1C, 0x22, 0x42, 0x42, 0x80, 0x00, 0x00,
-    0x02, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x02, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00,
-    0x06, 0x38, 0xC0, 0x00, 0xC0, 0x38, 0x06, 0x00, 0x3E, 0xC0, 0xF0, 0x0E, 0xF0, 0xC0, 0x3E, 0x00,
-    0x00, 0x06, 0x98, 0x60, 0x98, 0x06, 0x00, 0x00, 0x00, 0x06, 0x18, 0xE0, 0x18, 0x06, 0x00, 0x00,
-    0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x02, 0x02, 0x02, 0x02, 0x00,
-    0x00, 0x06, 0x18, 0x60, 0x80, 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00,
-    0x40, 0x30, 0x0C, 0x0C, 0x30, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x01, 0x02, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x06, 0x01, 0x01, 0x01, 0x01, 0x01, 0x06, 0x00,
-    0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
-    0x07, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
-    0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x07, 0x00, 0x00,
-    0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00,
-    0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00,
-    0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x00, 0x00, 0x07, 0x00,
-    0x07, 0x00, 0x00, 0x00, 0x03, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00,
-    0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x0C, 0x12, 0x11, 0x10, 0x00,
-    0x00, 0x07, 0x00, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
-    0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00,
-    0x00, 0x06, 0x01, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
-    0x06, 0x05, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x10, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x10, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00,
-    0x00, 0x00, 0x02, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00,
-    0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00,
-    0x00, 0xE0, 0x10, 0x10, 0x10, 0xFE, 0x00, 0x00, 0x00, 0xE0, 0x90, 0x90, 0x90, 0xE0, 0x00, 0x00,
-    0x00, 0x20, 0xFC, 0x22, 0x22, 0x22, 0x02, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00,
-    0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x10, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x80, 0x40, 0x20, 0x10, 0x00, 0x00,
-    0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x20, 0x10, 0xF0, 0x20, 0x10, 0xF0, 0x00,
-    0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xE0, 0x00, 0x00,
-    0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00,
-    0x00, 0xF0, 0x20, 0x10, 0x10, 0x70, 0x00, 0x00, 0x00, 0x60, 0x90, 0x90, 0x90, 0x20, 0x00, 0x00,
-    0x00, 0x20, 0x20, 0xFC, 0x20, 0x20, 0x20, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00,
-    0x00, 0x70, 0x80, 0x00, 0x80, 0x70, 0x00, 0x00, 0xF0, 0x00, 0xC0, 0x30, 0xC0, 0x00, 0xF0, 0x00,
-    0x00, 0x30, 0xC0, 0xC0, 0x30, 0x00, 0x00, 0x00, 0x00, 0x30, 0xC0, 0x00, 0x80, 0x70, 0x00, 0x00,
-    0x00, 0x10, 0x10, 0x90, 0x50, 0x30, 0x00, 0x00, 0x00, 0x80, 0x80, 0x7E, 0x02, 0x02, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x7E, 0x80, 0x80, 0x00, 0x00,
-    0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00,
-    0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
-    0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
-    0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x24, 0x24, 0x22, 0x1F, 0x00, 0x00,
-    0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x00,
-    0x20, 0x20, 0x20, 0x20, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00,
-    0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
-    0x00, 0x3F, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x3F, 0x00, 0x00,
-    0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00,
-    0x00, 0x00, 0x03, 0x04, 0x03, 0x00, 0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x01, 0x06, 0x01, 0x00,
-    0x00, 0x06, 0x01, 0x01, 0x06, 0x00, 0x00, 0x00, 0x20, 0x20, 0x31, 0x0E, 0x03, 0x00, 0x00, 0x00,
-    0x00, 0x06, 0x05, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00,
-    0x01, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-};

keyboards/68keys/68keys.c

@@ -0,0 +1,6 @@
+#include "68keys.h"
+
+void matrix_init_kb(void)
+{
+	matrix_init_user();
+}

keyboards/68keys/68keys.h

@@ -0,0 +1,20 @@
+#include "quantum.h"
+
+#define LAYOUT_68_ansi(                                                             \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14, K15, K16, \
+    K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32, K33, K34, \
+    K35, K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47, K48,                \
+    K50, K51, K52, K53, K54, K55, K56, K57, K58, K60, K61, K62, K63,                \
+    K64, K65, K66, K67, K68, K70, K71, K72, K73, K74)                               \
+    {                                                                               \
+        {K00, K01, K02, K03, K04, K05, K06, K07, K08},                              \
+            {K10, K11, K12, K13, K14, K15, K16, K17, K18},                          \
+            {K20, K21, K22, K23, K24, K25, K26, K27, K28},                          \
+            {K30, K31, K32, K33, K34, K35, K36, K37, K38},                          \
+            {K40, K41, K42, K43, K44, K45, K46, K47, K48},                          \
+            {K50, K51, K52, K53, K54, K55, K56, K57, K58},                          \
+            {K60, K61, K62, K63, K64, K65, K66, K67, K68},                          \
+        {                                                                           \
+            K70, K71, K72, K73, K74                                                 \
+        }                                                                           \
+    }

keyboards/68keys/README.md

@@ -0,0 +1,23 @@
+# 68Keys.io
+
+Custom [68Keys.io](https://68keys.io) DIY keyboard.
+
+Keyboard Maintainer: [sbstjn](https://sbstjn.com)  
+Hardware Supported: Pro Micro  
+Hardware Availability: [DIY Guide](https://68keys.io)
+
+Make example for this keyboard (after setting up your build environment):
+
+```bash
+$ > cd qmk_firmware/
+$ > make 68keys:default
+```
+
+Example of flashing this keyboard:
+
+```bash
+$ > cd qmk_firmware/
+$ > make 68keys:default:avrdude
+```
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/68keys/config.h

@@ -0,0 +1,42 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0A0C
+#define DEVICE_VER 0x0068
+#define MANUFACTURER 68Keys.io
+#define PRODUCT The 68Keys.io Keyboard
+#define DESCRIPTION A 68 keys mechanical keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 9
+
+#define MATRIX_ROW_PINS                \
+    {                                  \
+        B6, B2, B3, B1, F7, F6, F5, F4 \
+    }
+#define MATRIX_COL_PINS                    \
+    {                                      \
+        D3, D2, D1, D0, D4, C6, D7, E6, B4 \
+    }
+#define UNUSED_PINS
+
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B5
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

keyboards/68keys/info.json

@@ -0,0 +1,81 @@
+{
+  "keyboard_name": "68Keys.io",
+  "url": "https://68keys.io",
+  "maintainer": "qmk",
+  "width": 17.25,
+  "height": 5,
+  "layouts": {
+    "LAYOUT_68_ansi": {
+      "layout": [
+        { "label": "~", "x": 0, "y": 0 },
+        { "label": "!", "x": 1, "y": 0 },
+        { "label": "@", "x": 2, "y": 0 },
+        { "label": "#", "x": 3, "y": 0 },
+        { "label": "$", "x": 4, "y": 0 },
+        { "label": "%", "x": 5, "y": 0 },
+        { "label": "^", "x": 6, "y": 0 },
+        { "label": "&", "x": 7, "y": 0 },
+        { "label": "*", "x": 8, "y": 0 },
+        { "label": "(", "x": 9, "y": 0 },
+        { "label": ")", "x": 10, "y": 0 },
+        { "label": "_", "x": 11, "y": 0 },
+        { "label": "+", "x": 12, "y": 0 },
+        { "label": "Backspace", "x": 13, "y": 0, "w": 2 },
+        { "label": "ESC", "x": 15.25, "y": 0 },
+        { "label": "PGUP", "x": 16.25, "y": 0 },
+        { "label": "Tab", "x": 0, "y": 1, "w": 1.5 },
+        { "label": "Q", "x": 1.5, "y": 1 },
+        { "label": "W", "x": 2.5, "y": 1 },
+        { "label": "E", "x": 3.5, "y": 1 },
+        { "label": "R", "x": 4.5, "y": 1 },
+        { "label": "T", "x": 5.5, "y": 1 },
+        { "label": "Y", "x": 6.5, "y": 1 },
+        { "label": "U", "x": 7.5, "y": 1 },
+        { "label": "I", "x": 8.5, "y": 1 },
+        { "label": "O", "x": 9.5, "y": 1 },
+        { "label": "P", "x": 10.5, "y": 1 },
+        { "label": "{", "x": 11.5, "y": 1 },
+        { "label": "}", "x": 12.5, "y": 1 },
+        { "label": "|", "x": 13.5, "y": 1, "w": 1.5 },
+        { "label": "DEL", "x": 15.25, "y": 1 },
+        { "label": "PGDN", "x": 16.25, "y": 1 },
+        { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 },
+        { "label": "A", "x": 1.75, "y": 2 },
+        { "label": "S", "x": 2.75, "y": 2 },
+        { "label": "D", "x": 3.75, "y": 2 },
+        { "label": "F", "x": 4.75, "y": 2 },
+        { "label": "G", "x": 5.75, "y": 2 },
+        { "label": "H", "x": 6.75, "y": 2 },
+        { "label": "J", "x": 7.75, "y": 2 },
+        { "label": "K", "x": 8.75, "y": 2 },
+        { "label": "L", "x": 9.75, "y": 2 },
+        { "label": ":", "x": 10.75, "y": 2 },
+        { "label": "\"", "x": 11.75, "y": 2 },
+        { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 },
+        { "label": "Shift", "x": 0, "y": 3, "w": 2.25 },
+        { "label": "Z", "x": 2.25, "y": 3 },
+        { "label": "X", "x": 3.25, "y": 3 },
+        { "label": "C", "x": 4.25, "y": 3 },
+        { "label": "V", "x": 5.25, "y": 3 },
+        { "label": "B", "x": 6.25, "y": 3 },
+        { "label": "N", "x": 7.25, "y": 3 },
+        { "label": "M", "x": 8.25, "y": 3 },
+        { "label": "<", "x": 9.25, "y": 3 },
+        { "label": ">", "x": 10.25, "y": 3 },
+        { "label": "?", "x": 11.25, "y": 3 },
+        { "label": "Shift", "x": 12.25, "y": 3, "w": 2.75 },
+        { "x": 15.25, "y": 3 },
+        { "label": "CTRL", "x": 0, "y": 4, "w": 1.25 },
+        { "label": "ALT", "x": 1.25, "y": 4, "w": 1.25 },
+        { "label": "GUI", "x": 2.5, "y": 4, "w": 1.25 },
+        { "x": 3.75, "y": 4, "w": 6.25 },
+        { "label": "GUI", "x": 10, "y": 4, "w": 1.25 },
+        { "label": "ALT", "x": 11.25, "y": 4, "w": 1.25 },
+        { "label": "CTRL", "x": 12.5, "y": 4, "w": 1.25 },
+        { "x": 14.25, "y": 4 },
+        { "x": 15.25, "y": 4 },
+        { "x": 16.25, "y": 4 }
+      ]
+    }
+  }
+}

keyboards/68keys/keymaps/default/keymap.c

@@ -0,0 +1,10 @@
+#include QMK_KEYBOARD_H
+#include "68keys.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_68_ansi(
+        KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_ESC, KC_PGUP,
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN,
+        KC_CAPSLOCK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
+        KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT)};

keyboards/68keys/rules.mk

@@ -0,0 +1,22 @@
+LAYOUTS = 68_ansi
+
+MCU = atmega32u4
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+BOOTLOADER = atmel-dfu
+
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration (+1000)
+MOUSEKEY_ENABLE = no        # Mouse keys (+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control (+450)
+CONSOLE_ENABLE = no         # Console for debug (+400)
+COMMAND_ENABLE = no         # Commands for debug and configuration
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+

keyboards/baguette/baguette.c

@@ -0,0 +1,71 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "baguette.h"
+
+void bootmagic_lite(void)
+{
+	// The lite version of TMK's bootmagic made by Wilba.
+	// 100% less potential for accidentally making the
+	// keyboard do stupid things.
+
+	// We need multiple scans because debouncing can't be turned off.
+	matrix_scan();
+	wait_ms(DEBOUNCING_DELAY);
+	matrix_scan();
+
+	// If the Esc and space bar are held down on power up,
+	// reset the EEPROM valid state and jump to bootloader.
+	// Assumes Esc is at [0,0] and spacebar is at [4,7].
+	// This isn't very generalized, but we need something that doesn't
+	// rely on user's keymaps in firmware or EEPROM.
+	if ( ( matrix_get_row(0) & (1<<0) ) &&
+		( matrix_get_row(4) & (1<<7) ) )
+	{
+		// Set the TMK/QMK EEPROM state as invalid.
+		eeconfig_disable();
+		//eeprom_set_valid(false);
+		// Jump to bootloader.
+		bootloader_jump();
+	}
+}
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	bootmagic_lite();
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}

keyboards/baguette/baguette.h

@@ -0,0 +1,59 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef BAGUETTE_H
+#define BAGUETTE_H
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_ansi( \
+        K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F, \
+        K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D,          K1F, \
+        K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,          K2D,               \
+        K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E,        \
+                      K42,   K43,                        K47,                        K4B,   K4C,   K4D,   K4E,   K4F  \
+) \
+{ \
+    {   K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F }, \
+    {   K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D, KC_NO,   K1F }, \
+    {   K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B, KC_NO,   K2D, KC_NO, KC_NO }, \
+    {   K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E, KC_NO }, \
+    { KC_NO, KC_NO,   K42,   K43, KC_NO, KC_NO, KC_NO,   K47, KC_NO, KC_NO, KC_NO,   K4B,   K4C,   K4D,   K4E,   K4F }  \
+}
+
+#define LAYOUT_iso( \
+        K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F, \
+        K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,                 K1F, \
+        K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K1D,   K2D,               \
+        K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E,        \
+                      K42,   K43,                        K47,                        K4B,   K4C,   K4D,   K4E,   K4F  \
+) \
+{ \
+    {   K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D,   K0E,   K0F }, \
+    {   K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C, KC_NO, KC_NO,   K1F }, \
+    {   K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K1D,   K2D, KC_NO, KC_NO }, \
+    {   K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D,   K3E, KC_NO }, \
+    { KC_NO, KC_NO,   K42,   K43, KC_NO, KC_NO, KC_NO,   K47, KC_NO, KC_NO, KC_NO,   K4B,   K4C,   K4D,   K4E,   K4F }  \
+}
+
+#endif

keyboards/baguette/config.h

@@ -0,0 +1,224 @@
+/*
+Copyright 2018 Yiancar
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x5050
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Yiancar
+#define PRODUCT         Baguette
+#define DESCRIPTION     A French Custom
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B3, B2, B1, E6, D6 }
+#define MATRIX_COL_PINS { B6, C6, C7, F7, F6, F5, F4, F1, F0, B0, D0, D1, D2, D3, D5, D4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 5
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+// #define RGBLIGHT_ANIMATIONS
+// #define RGBLED_NUM 16
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+

keyboards/baguette/info.json

@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "Baguette", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "bootloader": "atmel-dfu", 
+    "width": 19.75, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_ansi": {
+            "layout": [{"label":"~", "x":3.25, "y":1.5}, {"label":"!", "x":4.25, "y":1.5}, {"label":"@", "x":5.25, "y":1.5}, {"label":"#", "x":6.25, "y":1.5}, {"label":"$", "x":7.25, "y":1.5}, {"label":"%", "x":8.25, "y":1.5}, {"label":"^", "x":9.25, "y":1.5}, {"label":"&", "x":10.25, "y":1.5}, {"label":"*", "x":11.25, "y":1.5}, {"label":"(", "x":12.25, "y":1.5}, {"label":")", "x":13.25, "y":1.5}, {"label":"_", "x":14.25, "y":1.5}, {"label":"+", "x":15.25, "y":1.5}, {"label":"|", "x":16.25, "y":1.5}, {"label":"Del", "x":17.25, "y":1.5}, {"label":"Insert", "x":18.75, "y":1.5}, {"label":"Tab", "x":3.25, "y":2.5, "w":1.5}, {"label":"Q", "x":4.75, "y":2.5}, {"label":"W", "x":5.75, "y":2.5}, {"label":"E", "x":6.75, "y":2.5}, {"label":"R", "x":7.75, "y":2.5}, {"label":"T", "x":8.75, "y":2.5}, {"label":"Y", "x":9.75, "y":2.5}, {"label":"U", "x":10.75, "y":2.5}, {"label":"I", "x":11.75, "y":2.5}, {"label":"O", "x":12.75, "y":2.5}, {"label":"P", "x":13.75, "y":2.5}, {"label":"{", "x":14.75, "y":2.5}, {"label":"}", "x":15.75, "y":2.5}, {"label":"|", "x":16.75, "y":2.5, "w":1.5}, {"label":"Delete", "x":18.75, "y":2.5}, {"label":"Control", "x":3.25, "y":3.5, "w":1.75}, {"label":"A", "x":5, "y":3.5}, {"label":"S", "x":6, "y":3.5}, {"label":"D", "x":7, "y":3.5}, {"label":"F", "x":8, "y":3.5}, {"label":"G", "x":9, "y":3.5}, {"label":"H", "x":10, "y":3.5}, {"label":"J", "x":11, "y":3.5}, {"label":"K", "x":12, "y":3.5}, {"label":"L", "x":13, "y":3.5}, {"label":":", "x":14, "y":3.5}, {"label":"\"", "x":15, "y":3.5}, {"label":"Enter", "x":16, "y":3.5, "w":2.25}, {"x":3.25, "y":4.5, "w":1.25}, {"x":4.5, "y":4.5}, {"label":"Z", "x":5.5, "y":4.5}, {"label":"X", "x":6.5, "y":4.5}, {"label":"C", "x":7.5, "y":4.5}, {"label":"V", "x":8.5, "y":4.5}, {"label":"B", "x":9.5, "y":4.5}, {"label":"N", "x":10.5, "y":4.5}, {"label":"M", "x":11.5, "y":4.5}, {"label":"<", "x":12.5, "y":4.5}, {"label":">", "x":13.5, "y":4.5}, {"label":"?", "x":14.5, "y":4.5}, {"x":15.5, "y":4.5}, {"label":"Shift", "x":16.5, "y":4.5, "w":1.25}, {"label":"\u2191", "x":17.75, "y":4.5}, {"label":"Win", "x":4.5, "y":5.5}, {"label":"Alt", "x":5.5, "y":5.5, "w":1.25}, {"x":6.75, "y":5.5, "w":6.25}, {"label":"Ctrl", "x":13, "y":5.5, "w":1.25}, {"label":"Fn", "x":14.25, "y":5.5}, {"label":"\u2190", "x":16.75, "y":5.5}, {"label":"\u2193", "x":17.75, "y":5.5}, {"label":"\u2192", "x":18.75, "y":5.5}]
+        },
+        "LAYOUT_iso": {
+            "layout": [{"label":"~", "x":3.25, "y":1.5}, {"label":"!", "x":4.25, "y":1.5}, {"label":"@", "x":5.25, "y":1.5}, {"label":"#", "x":6.25, "y":1.5}, {"label":"$", "x":7.25, "y":1.5}, {"label":"%", "x":8.25, "y":1.5}, {"label":"^", "x":9.25, "y":1.5}, {"label":"&", "x":10.25, "y":1.5}, {"label":"*", "x":11.25, "y":1.5}, {"label":"(", "x":12.25, "y":1.5}, {"label":")", "x":13.25, "y":1.5}, {"label":"_", "x":14.25, "y":1.5}, {"label":"+", "x":15.25, "y":1.5}, {"label":"|", "x":16.25, "y":1.5}, {"label":"Del", "x":17.25, "y":1.5}, {"label":"Insert", "x":18.75, "y":1.5}, {"label":"Tab", "x":3.25, "y":2.5, "w":1.5}, {"label":"Q", "x":4.75, "y":2.5}, {"label":"W", "x":5.75, "y":2.5}, {"label":"E", "x":6.75, "y":2.5}, {"label":"R", "x":7.75, "y":2.5}, {"label":"T", "x":8.75, "y":2.5}, {"label":"Y", "x":9.75, "y":2.5}, {"label":"U", "x":10.75, "y":2.5}, {"label":"I", "x":11.75, "y":2.5}, {"label":"O", "x":12.75, "y":2.5}, {"label":"P", "x":13.75, "y":2.5}, {"label":"{", "x":14.75, "y":2.5}, {"label":"}", "x":15.75, "y":2.5}, {"label":"Enter", "x":17, "y":2.5, "w":1.25, "h":2}, {"label":"Delete", "x":18.75, "y":2.5}, {"label":"Control", "x":3.25, "y":3.5, "w":1.75}, {"label":"A", "x":5, "y":3.5}, {"label":"S", "x":6, "y":3.5}, {"label":"D", "x":7, "y":3.5}, {"label":"F", "x":8, "y":3.5}, {"label":"G", "x":9, "y":3.5}, {"label":"H", "x":10, "y":3.5}, {"label":"J", "x":11, "y":3.5}, {"label":"K", "x":12, "y":3.5}, {"label":"L", "x":13, "y":3.5}, {"label":":", "x":14, "y":3.5}, {"label":"\"", "x":15, "y":3.5}, {"x":16, "y":3.5}, {"x":3.25, "y":4.5, "w":1.25}, {"x":4.5, "y":4.5}, {"label":"Z", "x":5.5, "y":4.5}, {"label":"X", "x":6.5, "y":4.5}, {"label":"C", "x":7.5, "y":4.5}, {"label":"V", "x":8.5, "y":4.5}, {"label":"B", "x":9.5, "y":4.5}, {"label":"N", "x":10.5, "y":4.5}, {"label":"M", "x":11.5, "y":4.5}, {"label":"<", "x":12.5, "y":4.5}, {"label":">", "x":13.5, "y":4.5}, {"label":"?", "x":14.5, "y":4.5}, {"x":15.5, "y":4.5}, {"label":"Shift", "x":16.5, "y":4.5, "w":1.25}, {"label":"\u2191", "x":17.75, "y":4.5}, {"label":"Win", "x":4.5, "y":5.5}, {"label":"Alt", "x":5.5, "y":5.5, "w":1.25}, {"x":6.75, "y":5.5, "w":6.25}, {"label":"Ctrl", "x":13, "y":5.5, "w":1.25}, {"label":"Fn", "x":14.25, "y":5.5}, {"label":"\u2190", "x":16.75, "y":5.5}, {"label":"\u2193", "x":17.75, "y":5.5}, {"label":"\u2192", "x":18.75, "y":5.5}]
+        }
+    }
+}

keyboards/baguette/keymaps/default/keymap.c

@@ -0,0 +1,50 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_ansi( /* Base */
+    KC_GESC,  KC_1,     KC_2,     KC_3,  KC_4,  KC_5,  KC_6,    KC_7,  KC_8,  KC_9,     KC_0,     KC_MINS,  KC_EQL,  KC_BSPC,  KC_TRNS,  KC_INS,\
+    KC_TAB,   KC_Q,     KC_W,     KC_E,  KC_R,  KC_T,  KC_Y,    KC_U,  KC_I,  KC_O,     KC_P,     KC_LBRC,  KC_RBRC, KC_BSLS,            KC_DEL,\
+    KC_CAPS,  KC_A,     KC_S,     KC_D,  KC_F,  KC_G,  KC_H,    KC_J,  KC_K,  KC_L,     KC_SCLN,  KC_QUOT,           KC_ENT,                    \
+    KC_LSFT,  KC_TRNS,  KC_Z,     KC_X,  KC_C,  KC_V,  KC_B,    KC_N,  KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  KC_TRNS, KC_RSFT,  KC_UP,           \
+                     KC_LGUI,  KC_LALT,                       KC_SPC,                             KC_RCTL,  MO(1),   KC_LEFT, KC_DOWN,  KC_RGHT),
+
+[1] = LAYOUT_ansi( /* FN */
+    KC_TRNS,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,  KC_TRNS,  KC_TRNS,  KC_TRNS,\
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  RESET,   KC_TRNS,            KC_TRNS,\
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,           KC_TRNS,                    \
+    KC_TRNS,  KC_TRNS,  BL_TOGG,  BL_STEP,  BL_BRTG,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,          \
+                        KC_TRNS,  KC_TRNS,                                KC_TRNS,                                KC_RCTL,  KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS),
+};
+
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/baguette/keymaps/default/readme.md

@@ -0,0 +1,9 @@
+# The default ANSI keymap for baguette
+
+Typical ANSI keymap. Please note:
+- Left key from split backspace is connected to 2u key.
+- Left key from split left Shift is connected to 2u key.
+- Right key from split right Shift is connected to 2u key.
+- Backlight control is on the Z, X and C keys of the FN layer.
+- Reset key combination is FN + ].
+- Holding ESC and Space while plugging in the USB erases the EEPROM.

keyboards/baguette/keymaps/iso/keymap.c

@@ -0,0 +1,50 @@
+/* Copyright 2018 Yiancar
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT_iso( /* Base */
+    KC_GESC,  KC_1,     KC_2,     KC_3,  KC_4,  KC_5,  KC_6,    KC_7,  KC_8,  KC_9,     KC_0,     KC_MINS,  KC_EQL,  KC_BSPC,  KC_TRNS,  KC_INS,\
+    KC_TAB,   KC_Q,     KC_W,     KC_E,  KC_R,  KC_T,  KC_Y,    KC_U,  KC_I,  KC_O,     KC_P,     KC_LBRC,  KC_RBRC,                     KC_DEL,\
+    KC_CAPS,  KC_A,     KC_S,     KC_D,  KC_F,  KC_G,  KC_H,    KC_J,  KC_K,  KC_L,     KC_SCLN,  KC_QUOT,  KC_QUOT, KC_ENT,                    \
+    KC_LSFT,  KC_TRNS,  KC_Z,     KC_X,  KC_C,  KC_V,  KC_B,    KC_N,  KC_M,  KC_COMM,  KC_DOT,   KC_SLSH,  KC_TRNS, KC_RSFT,  KC_UP,           \
+              KC_LGUI,  KC_LALT,                       KC_SPC,                          KC_RCTL,  MO(1),    KC_LEFT, KC_DOWN,  KC_RGHT),
+
+[0] = LAYOUT_iso( /* FN */
+    KC_TRNS,  KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,  KC_TRNS,  KC_TRNS,  KC_TRNS,\
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  RESET,   KC_TRNS,            KC_TRNS,\
+    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,           KC_TRNS,                    \
+    KC_TRNS,  KC_TRNS,  BL_TOGG,  BL_STEP,  BL_BRTG,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS,          \
+              KC_TRNS,  KC_TRNS,                                KC_TRNS,                                KC_RCTL,  KC_TRNS,  KC_TRNS, KC_TRNS,  KC_TRNS),
+};
+
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}

keyboards/baguette/keymaps/iso/readme.md

@@ -0,0 +1,10 @@
+# The default ISO keymap for baguette
+
+Typical ISO keymap. Please note:
+- Left key from split backspace is connected to 2u key.
+- Left key from split left Shift is connected to 2u key.
+- Right key from split right Shift is connected to 2u key.
+- Backlight control is on the Z, X and C keys of the FN layer.
+- Reset key combination is FN + ].
+- Holding ESC and Space while plugging in the USB erases the EEPROM.
+

keyboards/baguette/readme.md

@@ -0,0 +1,16 @@
+Baguette
+========
+
+![Baguette](https://cdn.discordapp.com/attachments/426880953143525384/479788409263489035/scecre2.png)
+
+This is a custom keyboard with backlight inspired by France.
+
+Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [github](https://github.com/yiancar)  
+Hardware Supported: ATMEGA 32u4 MCU with backlight support.
+Hardware Availability: Closed group-buy please contact the runners (Tesletron and Enjoy)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make baguette:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/baguette/rules.mk

@@ -0,0 +1,81 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no        # Console for debug(+400)
+COMMAND_ENABLE = no        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes       # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no 		# Enable support for HD44780 based LCDs (+400)

keyboards/bmini/bmini.h

@@ -38,6 +38,24 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   { K07, K17,   K27, K37,   K47,   K57,   K67,   K77,   KC_NO, KC_NO, KA7,   KB7, KC7,   KD7,   KE7   } \
 }
 
+#define LAYOUT_splitbs( \
+  K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \
+  K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, KD4, KD0, \
+  K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3,      K67, \
+  K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2,           KE0, \
+  K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1,           K86, K77, \
+  K00, K10, K20,           K56,                     K57, KB0, KC0, K66, K76, K96  \
+){ \
+  { K00, K10,   K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB0, KC0,   KD0,   KE0   }, \
+  { K01, K11,   K21, K31,   K41,   K51,   KC_NO, KC_NO, KC_NO, KC_NO, KA1,   KB1, KC_NO, KD1,   KE1   }, \
+  { K02, K12,   K22, K32,   K42,   K52,   KC_NO, KC_NO, KC_NO, KC_NO, KA2,   KB2, KC_NO, KD2,   KE2   }, \
+  { K03, K13,   K23, K33,   K43,   K53,   KC_NO, KC_NO, KC_NO, KC_NO, KA3,   KB3, KC3,   KD3,   KC_NO }, \
+  { K04, K14,   K24, K34,   K44,   K54,   KC_NO, KC_NO, KC_NO, KC_NO, KA4,   KB4, KC4,   KD4,   KE4   }, \
+  { K05, KC_NO, K25, K35,   K45,   K55,   KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB5, KC5,   KD5,   KE5   }, \
+  { K06, K16,   K26, K36,   K46,   K56,   K66,   K76,   K86,   K96,   KA6,   KB6, KC6,   KD6,   KE6   }, \
+  { K07, K17,   K27, K37,   K47,   K57,   K67,   K77,   KC_NO, KC_NO, KA7,   KB7, KC7,   KD7,   KE7   } \
+}
+
 #define LAYOUT_kc( \
     K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \
     K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4,      KD0, \

keyboards/bmini/info.json

@@ -8,6 +8,10 @@
     "LAYOUT": {
       "key_count": 84,
       "layout": [{"label":"K05", "x":0, "y":0}, {"label":"K25", "x":1, "y":0}, {"label":"K35", "x":2, "y":0}, {"label":"K45", "x":3, "y":0}, {"label":"K55", "x":4, "y":0}, {"label":"K06", "x":5, "y":0}, {"label":"KA6", "x":6, "y":0}, {"label":"KA7", "x":7, "y":0}, {"label":"K07", "x":8, "y":0}, {"label":"KB5", "x":9, "y":0}, {"label":"KC5", "x":10, "y":0}, {"label":"KD5", "x":11, "y":0}, {"label":"KE5", "x":12, "y":0}, {"label":"KD1", "x":13, "y":0}, {"label":"KE1", "x":14, "y":0}, {"label":"KE2", "x":15, "y":0}, {"label":"K04", "x":0, "y":1}, {"label":"K14", "x":1, "y":1}, {"label":"K24", "x":2, "y":1}, {"label":"K34", "x":3, "y":1}, {"label":"K44", "x":4, "y":1}, {"label":"K54", "x":5, "y":1}, {"label":"K16", "x":6, "y":1}, {"label":"KB6", "x":7, "y":1}, {"label":"KB7", "x":8, "y":1}, {"label":"K17", "x":9, "y":1}, {"label":"KA4", "x":10, "y":1}, {"label":"KB4", "x":11, "y":1}, {"label":"KC4", "x":12, "y":1}, {"label":"KE4", "x":13, "y":1, "w":2}, {"label":"KD0", "x":15, "y":1}, {"label":"K03", "x":0, "y":2, "w":1.5}, {"label":"K13", "x":1.5, "y":2}, {"label":"K23", "x":2.5, "y":2}, {"label":"K33", "x":3.5, "y":2}, {"label":"K43", "x":4.5, "y":2}, {"label":"K53", "x":5.5, "y":2}, {"label":"K26", "x":6.5, "y":2}, {"label":"KC6", "x":7.5, "y":2}, {"label":"KC7", "x":8.5, "y":2}, {"label":"K27", "x":9.5, "y":2}, {"label":"KA3", "x":10.5, "y":2}, {"label":"KB3", "x":11.5, "y":2}, {"label":"KC3", "x":12.5, "y":2}, {"label":"KD3", "x":13.5, "y":2, "w":1.5}, {"label":"K67", "x":15, "y":2}, {"label":"K02", "x":0, "y":3, "w":1.75}, {"label":"K12", "x":1.75, "y":3}, {"label":"K22", "x":2.75, "y":3}, {"label":"K32", "x":3.75, "y":3}, {"label":"K42", "x":4.75, "y":3}, {"label":"K52", "x":5.75, "y":3}, {"label":"K36", "x":6.75, "y":3}, {"label":"KD6", "x":7.75, "y":3}, {"label":"KD7", "x":8.75, "y":3}, {"label":"K37", "x":9.75, "y":3}, {"label":"KA2", "x":10.75, "y":3}, {"label":"KB2", "x":11.75, "y":3}, {"label":"KD2", "x":12.75, "y":3, "w":2.25}, {"label":"KE0", "x":15, "y":3}, {"label":"K01", "x":0, "y":4, "w":2.25}, {"label":"K11", "x":2.25, "y":4}, {"label":"K21", "x":3.25, "y":4}, {"label":"K31", "x":4.25, "y":4}, {"label":"K41", "x":5.25, "y":4}, {"label":"K51", "x":6.25, "y":4}, {"label":"K46", "x":7.25, "y":4}, {"label":"KE6", "x":8.25, "y":4}, {"label":"KE7", "x":9.25, "y":4}, {"label":"K47", "x":10.25, "y":4}, {"label":"KA1", "x":11.25, "y":4}, {"label":"KB1", "x":12.25, "y":4, "w":1.75}, {"label":"K86", "x":14, "y":4}, {"label":"K77", "x":15, "y":4}, {"label":"K00", "x":0, "y":5, "w":1.25}, {"label":"K10", "x":1.25, "y":5, "w":1.25}, {"label":"K20", "x":2.5, "y":5, "w":1.25}, {"label":"K56", "x":3.75, "y":5, "w":6.25}, {"label":"K57", "x":10, "y":5}, {"label":"KB0", "x":11, "y":5}, {"label":"KC0", "x":12, "y":5}, {"label":"K66", "x":13, "y":5}, {"label":"K76", "x":14, "y":5}, {"label":"K96", "x":15, "y":5}]
+    },
+    "LAYOUT_splitbs": {
+      "key_count": 85,
+      "layout": [{"label":"K05", "x":0, "y":0}, {"label":"K25", "x":1, "y":0}, {"label":"K35", "x":2, "y":0}, {"label":"K45", "x":3, "y":0}, {"label":"K55", "x":4, "y":0}, {"label":"K06", "x":5, "y":0}, {"label":"KA6", "x":6, "y":0}, {"label":"KA7", "x":7, "y":0}, {"label":"K07", "x":8, "y":0}, {"label":"KB5", "x":9, "y":0}, {"label":"KC5", "x":10, "y":0}, {"label":"KD5", "x":11, "y":0}, {"label":"KE5", "x":12, "y":0}, {"label":"KD1", "x":13, "y":0}, {"label":"KE1", "x":14, "y":0}, {"label":"KE2", "x":15, "y":0}, {"label":"K04", "x":0, "y":1}, {"label":"K14", "x":1, "y":1}, {"label":"K24", "x":2, "y":1}, {"label":"K34", "x":3, "y":1}, {"label":"K44", "x":4, "y":1}, {"label":"K54", "x":5, "y":1}, {"label":"K16", "x":6, "y":1}, {"label":"KB6", "x":7, "y":1}, {"label":"KB7", "x":8, "y":1}, {"label":"K17", "x":9, "y":1}, {"label":"KA4", "x":10, "y":1}, {"label":"KB4", "x":11, "y":1}, {"label":"KC4", "x":12, "y":1}, {"label":"KE4", "x":13, "y":1}, {"label":"KD4", "x":14, "y":1}, {"label":"KD0", "x":15, "y":1}, {"label":"K03", "x":0, "y":2, "w":1.5}, {"label":"K13", "x":1.5, "y":2}, {"label":"K23", "x":2.5, "y":2}, {"label":"K33", "x":3.5, "y":2}, {"label":"K43", "x":4.5, "y":2}, {"label":"K53", "x":5.5, "y":2}, {"label":"K26", "x":6.5, "y":2}, {"label":"KC6", "x":7.5, "y":2}, {"label":"KC7", "x":8.5, "y":2}, {"label":"K27", "x":9.5, "y":2}, {"label":"KA3", "x":10.5, "y":2}, {"label":"KB3", "x":11.5, "y":2}, {"label":"KC3", "x":12.5, "y":2}, {"label":"KD3", "x":13.5, "y":2, "w":1.5}, {"label":"K67", "x":15, "y":2}, {"label":"K02", "x":0, "y":3, "w":1.75}, {"label":"K12", "x":1.75, "y":3}, {"label":"K22", "x":2.75, "y":3}, {"label":"K32", "x":3.75, "y":3}, {"label":"K42", "x":4.75, "y":3}, {"label":"K52", "x":5.75, "y":3}, {"label":"K36", "x":6.75, "y":3}, {"label":"KD6", "x":7.75, "y":3}, {"label":"KD7", "x":8.75, "y":3}, {"label":"K37", "x":9.75, "y":3}, {"label":"KA2", "x":10.75, "y":3}, {"label":"KB2", "x":11.75, "y":3}, {"label":"KD2", "x":12.75, "y":3, "w":2.25}, {"label":"KE0", "x":15, "y":3}, {"label":"K01", "x":0, "y":4, "w":2.25}, {"label":"K11", "x":2.25, "y":4}, {"label":"K21", "x":3.25, "y":4}, {"label":"K31", "x":4.25, "y":4}, {"label":"K41", "x":5.25, "y":4}, {"label":"K51", "x":6.25, "y":4}, {"label":"K46", "x":7.25, "y":4}, {"label":"KE6", "x":8.25, "y":4}, {"label":"KE7", "x":9.25, "y":4}, {"label":"K47", "x":10.25, "y":4}, {"label":"KA1", "x":11.25, "y":4}, {"label":"KB1", "x":12.25, "y":4, "w":1.75}, {"label":"K86", "x":14, "y":4}, {"label":"K77", "x":15, "y":4}, {"label":"K00", "x":0, "y":5, "w":1.25}, {"label":"K10", "x":1.25, "y":5, "w":1.25}, {"label":"K20", "x":2.5, "y":5, "w":1.25}, {"label":"K56", "x":3.75, "y":5, "w":6.25}, {"label":"K57", "x":10, "y":5}, {"label":"KB0", "x":11, "y":5}, {"label":"KC0", "x":12, "y":5}, {"label":"K66", "x":13, "y":5}, {"label":"K76", "x":14, "y":5}, {"label":"K96", "x":15, "y":5}]
     }
   }
 }

keyboards/contra/keymaps/maxr1998/keymap.c

@@ -20,13 +20,17 @@
 enum contra_layers {
   _QWERTZ,
   _FUNC,
-  _NUMROW
+  _NUMROW,
+  _NUMROW_L3,
+  _GAMING
 };
 
 #define KC_I3 LM(_NUMROW, MOD_LALT)
 #define KC_NR MO(_NUMROW)
 #define NR_L3 SAFE_RANGE
 #define FUN MO(_FUNC)
+#define G_1 TO(_GAMING)
+#define G_0 TG(_GAMING)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
@@ -52,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,-----------------------------------------------------------------------------------.
  * |      |      |      |      |      |      |      |   Ü  |      |   Ö  |      | Del  |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Lock |   Ä  |   ß  |      |      |      |      | RGBS | RGBB | RGBS |      |      |
+ * | Lock |   Ä  |   ß  |      |      | GAME |      | RGBS | RGBB | RGBS |      |      |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * |      |      |      |      |      |      |      | RGBH-| RGBT | RGBH+| PgUp |      |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
@@ -61,14 +65,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [_FUNC] = {
   {_______, _______, _______, _______, _______, _______, _______, DE_UE,   _______, DE_OE,   _______, KC_DEL },
-  {KC_LOCK, DE_AE,   DE_SS,   _______, _______, _______, _______, RGB_M_P, RGB_M_B, RGB_M_SW,_______, _______},
+  {KC_LOCK, DE_AE,   DE_SS,   _______, _______, G_1,     _______, RGB_M_P, RGB_M_B, RGB_M_SW,_______, _______},
   {_______, _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_TOG, RGB_HUI, KC_PGUP, _______},
   {_______, _______, _______, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, KC_HOME, KC_PGDN, KC_END }
 },
 
 /* Numrow layer (special characters with Shift and ISO_L3_Shift)
  * ,-----------------------------------------------------------------------------------.
- * |      |  1   |  2   |  3   |  4   |  5   |  6   |  7   |  8   |  9   |  0   |  ß   |
+ * |      |  1   |  2   |  3   |  4   |  5   |  6   |  7   |  8   |  9   |  0   |      |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
  * |      |      |      |      |      |      |      |      |      |      |  #'  |      |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
@@ -78,25 +82,61 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * `-----------------------------------------------------------------------------------'
  */
 [_NUMROW] = {
-  {_______, DE_1,    DE_2,    DE_3,    DE_4,    DE_5,    DE_6,    DE_7,    DE_8,    DE_9,    DE_0,    DE_SS  },
+  {_______, DE_1,    DE_2,    DE_3,    DE_4,    DE_5,    DE_6,    DE_7,    DE_8,    DE_9,    DE_0,    _______},
   {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, DE_HASH, _______},
   {_______, DE_LESS, _______, _______, _______, _______, _______, _______, _______, _______, DE_MINS, _______},
   {_______, _______, _______, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, _______, _______, _______}
+},
+[_NUMROW_L3] = {
+  {_______, DE_1,    DE_2,    DE_3,    DE_4,    DE_5,    DE_6,    DE_7,    DE_8,    DE_9,    DE_0,    _______},
+  {_______, DE_Q,    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, DE_LESS, _______, _______, _______, _______, _______, _______, _______, _______, DE_MINS, _______},
+  {_______, _______, _______, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, _______, _______, _______}
+},
+
+/* Gaming
+ * ,-----------------------------------------------------------------------------------.
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Space|      |      |      |      |      |      |      | Reset|      |      |      |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_GAMING] = {
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______},
+  {KC_SPC,  _______, _______, _______, _______, _______, _______, _______, G_0,     _______, _______, _______}
 }
 };
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  if (keycode == NR_L3) {
-    if (record->event.pressed) {
-      register_code(DE_ALGR);
-      layer_on(_NUMROW);
-    } else {
-      layer_off(_NUMROW);
-      unregister_code(DE_ALGR);
-    }
-    return false;
+  switch(keycode) {
+    case KC_BSPC:
+      if (record->event.pressed) {
+        if (get_mods() & (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT))) {
+          register_code(DE_SS);
+          return false;
+        }
+      } else {
+        unregister_code(DE_SS);
+      }
+      return true;
+    case NR_L3:
+      if (record->event.pressed) {
+        register_code(DE_ALGR);
+        layer_on(_NUMROW_L3);
+      } else {
+        layer_off(_NUMROW_L3);
+        unregister_code(DE_ALGR);
+      }
+      return false;
+    default:
+      return true;
   }
-  return true;
 }
 
 void led_set_user(uint8_t usb_led) {

keyboards/converter/sun_usb/command_extra.c

@@ -0,0 +1,64 @@
+#include QMK_KEYBOARD_H
+#include "protocol/serial.h"
+
+bool sun_bell = false;
+bool sun_click = false;
+
+
+bool command_extra(uint8_t code)
+{
+    switch (code) {
+        case KC_H:
+        case KC_SLASH: /* ? */
+            print("\n\n----- Sun converter Help -----\n");
+            print("Home:        Toggle Bell\n");
+            print("End:         Toggle Click\n");
+            print("PgUp:        LED all On\n");
+            print("PgDown:      LED all Off\n");
+            print("Insert:      Layout\n");
+            print("Delete:      Reset\n");
+            return false;
+        case KC_DEL:
+            print("Reset\n");
+            serial_send(0x01);
+            break;
+        case KC_HOME:
+	    sun_bell = !sun_bell;
+	    if (sun_bell) {
+                print("Bell On\n");
+	        serial_send(0x02);
+	    } else {
+	        print("Bell Off\n");
+	        serial_send(0x03);
+	    }
+            break;
+        case KC_END:
+	    sun_click = !sun_click;
+	    if (sun_click) {
+	        print("Click On\n");
+		serial_send(0x0A);
+	    } else {
+	        print("Click Off\n");
+                serial_send(0x0B);
+	    }
+	    break;
+        case KC_PGUP:
+            print("LED all on\n");
+            serial_send(0x0E);
+            serial_send(0xFF);
+            break;
+        case KC_PGDOWN:
+            print("LED all off\n");
+            serial_send(0x0E);
+            serial_send(0x00);
+            break;
+        case KC_INSERT:
+            print("layout\n");
+            serial_send(0x0F);
+            break;
+        default:
+            xprintf("Unknown extra command: %02X\n", code);
+            return false;
+    }
+    return true;
+}

keyboards/converter/sun_usb/config.h

@@ -0,0 +1,88 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define CUSTOM_MATRIX 2
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x3333
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    QMK
+#define PRODUCT         Sun keyboard converter
+#define DESCRIPTION     USB converter for Sun type 5 keyboard
+
+/* matrix size */
+#define MATRIX_ROWS 16
+#define MATRIX_COLS 8
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
+    keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+
+/* Serial(USART) configuration
+ *     asynchronous, negative logic, 1200baud, no flow control
+ *     1-start bit, 8-data bit, non parity, 1-stop bit
+ */
+#define SERIAL_SOFT_BAUD            1200
+#define SERIAL_SOFT_PARITY_NONE
+#define SERIAL_SOFT_BIT_ORDER_LSB
+#define SERIAL_SOFT_LOGIC_NEGATIVE
+/* RXD Port */
+#define SERIAL_SOFT_RXD_ENABLE
+#define SERIAL_SOFT_RXD_DDR         DDRD
+#define SERIAL_SOFT_RXD_PORT        PORTD
+#define SERIAL_SOFT_RXD_PIN         PIND
+#define SERIAL_SOFT_RXD_BIT         2
+#define SERIAL_SOFT_RXD_VECT        INT2_vect
+/* RXD Interupt */
+#define SERIAL_SOFT_RXD_INIT()      do { \
+    /* pin configuration: input with pull-up */ \
+    SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
+    SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
+    /* enable interrupt: INT2(rising edge) */ \
+    EICRA |= ((1<<ISC21)|(1<<ISC20)); \
+    EIMSK |= (1<<INT2); \
+    sei(); \
+} while (0)
+#define SERIAL_SOFT_RXD_INT_ENTER()
+#define SERIAL_SOFT_RXD_INT_EXIT()  do { \
+    /* clear interrupt  flag */ \
+    EIFR = (1<<INTF2); \
+} while (0)
+#define SERIAL_SOFT_RXD_READ()      (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT))
+/* TXD Port */
+#define SERIAL_SOFT_TXD_ENABLE
+#define SERIAL_SOFT_TXD_DDR         DDRD
+#define SERIAL_SOFT_TXD_PORT        PORTD
+#define SERIAL_SOFT_TXD_PIN         PIND
+#define SERIAL_SOFT_TXD_BIT         3
+#define SERIAL_SOFT_TXD_HI()        do { SERIAL_SOFT_TXD_PORT |=  (1<<SERIAL_SOFT_TXD_BIT); } while (0)
+#define SERIAL_SOFT_TXD_LO()        do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0)
+#define SERIAL_SOFT_TXD_INIT()      do { \
+    /* pin configuration: output */ \
+    SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \
+    /* idle */ \
+    SERIAL_SOFT_TXD_ON(); \
+} while (0)
+
+#endif

keyboards/converter/sun_usb/led.c

@@ -0,0 +1,32 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+#include "protocol/serial.h"
+
+void led_set(uint8_t usb_led)
+{
+    uint8_t sun_led = 0;
+    if (usb_led & (1<<USB_LED_NUM_LOCK))    sun_led |= (1<<0);
+    if (usb_led & (1<<USB_LED_COMPOSE))     sun_led |= (1<<1);
+    if (usb_led & (1<<USB_LED_SCROLL_LOCK)) sun_led |= (1<<2);
+    if (usb_led & (1<<USB_LED_CAPS_LOCK))   sun_led |= (1<<3);
+    xprintf("LED: %02X\n", usb_led);
+
+    serial_send(0x0E);
+    serial_send(sun_led);
+}

keyboards/converter/sun_usb/matrix.c

@@ -0,0 +1,197 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+#include "protocol/serial.h"
+
+/*
+ * Matrix Array usage:
+ *
+ * ROW: 16(4bits)
+ * COL:  8(3bits)
+ *
+ *    8bit wide
+ *   +---------+
+ *  0|00 ... 07|
+ *  1|08 ... 0F|
+ *  :|   ...   |
+ *  :|   ...   |
+ *  E|70 ... 77|
+ *  F|78 ... 7F|
+ *   +---------+
+ */
+static uint8_t matrix[MATRIX_ROWS];
+#define ROW(code)      ((code>>3)&0xF)
+#define COL(code)      (code&0x07)
+
+static bool is_modified = false;
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+    return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+    /* DDRD |= (1<<6); */
+    /* PORTD |= (1<<6); */
+    debug_enable = true;
+
+    serial_init();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+
+    /* // wait for keyboard coming up */
+    /* // otherwise LED status update fails */
+    /* print("Reseting "); */
+    /* while (1) { */
+    /*     print("."); */
+    /*     while (serial_recv()); */
+    /*     serial_send(0x01); */
+    /*     _delay_ms(500); */
+    /*     if (serial_recv() == 0xFF) { */
+    /*         _delay_ms(500); */
+    /*         if (serial_recv() == 0x04) */
+    /*             break; */
+    /*     } */
+    /* } */
+    /* print(" Done\n"); */
+
+    /* PORTD &= ~(1<<6); */
+
+    matrix_init_quantum();
+    return;
+}
+
+uint8_t matrix_scan(void)
+{
+    uint8_t code;
+    code = serial_recv();
+    if (!code) return 0;
+
+    debug_hex(code); debug(" ");
+
+    switch (code) {
+        case 0xFF:  // reset success: FF 04
+            print("reset: ");
+            _delay_ms(500);
+            code = serial_recv();
+            xprintf("%02X\n", code);
+            if (code == 0x04) {
+                // LED status
+                led_set(host_keyboard_leds());
+            }
+            return 0;
+        case 0xFE:  // layout: FE <layout>
+            print("layout: ");
+            _delay_ms(500);
+            xprintf("%02X\n", serial_recv());
+            return 0;
+        case 0x7E:  // reset fail: 7E 01
+            print("reset fail: ");
+            _delay_ms(500);
+            xprintf("%02X\n", serial_recv());
+            return 0;
+        case 0x7F:
+            // all keys up
+            for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+            return 0;
+    }
+
+    if (code&0x80) {
+        // break code
+        if (matrix_is_on(ROW(code), COL(code))) {
+            matrix[ROW(code)] &= ~(1<<COL(code));
+        }
+    } else {
+        // make code
+        if (!matrix_is_on(ROW(code), COL(code))) {
+            matrix[ROW(code)] |=  (1<<COL(code));
+        }
+    }
+
+    matrix_scan_quantum();
+    return code;
+}
+
+bool matrix_is_modified(void)
+{
+    return is_modified;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+    return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & (1<<col));
+}
+
+inline
+uint8_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 01234567\n");
+    for (uint8_t row = 0; row < matrix_rows(); row++) {
+        phex(row); print(": ");
+        pbin_reverse(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop(matrix[i]);
+    }
+    return count;
+}

keyboards/converter/sun_usb/readme.md

@@ -0,0 +1,89 @@
+# Sun to USB keyboard protocol converter
+
+A converter for using non-USB Sun keyboards.
+
+Original code from the [TMK firmware](https://github.com/tmk/tmk_keyboard/tree/master/converter/sun_usb). Ported to QMK by [Yann Hodique](https://github.com/sigma).
+
+Keyboard Maintainer: [Yann Hodique](https://github.com/sigma)  
+Hardware Supported: See hardware section below  
+Hardware Availability: self-built
+
+Make example for this keyboard (after setting up your build environment):
+
+    make converter/sun_usb/type5:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+
+## Hardware
+
+Target MCU is ATMega32u4 but other USB capable AVR will also work. The maintainer mostly uses Teensy 2.0 boards.
+Supported keyboards: Sun Type 3 and 5 Keyboards,
+
+### Connector
+
+8Pin mini DIN
+
+       ___ ___
+      /  |_|  \
+     / 8  7  6 \
+    | 5    4  3 |
+     \_ 2   1 _/
+       \_____/
+    (receptacle)
+
+
+Wiring:
+
+    Pin mini DIN        MCU
+    ----------------------------------
+    1   GND             GND
+    2   GND             GND
+    3   5V
+    4   RX/TX(Mouse)
+    5   RX              PD3
+    6   TX              PD2
+    7   GND             GND
+    8   5V              VCC
+
+
+### Protocol
+
+    Signal: Asynchronous, Negative logic, 1200baud, No Flow control
+    Frame format: 1-Start bit, 8-Data bits, No-Parity, 1-Stop bit
+
+    AVR USART engine expects positive logic while Sun keyboard signal is negative.
+    To use AVR UART engine you need external inverter in front of RX and TX pin.
+    Otherwise you can software serial routine to communicate the keyboard.
+
+This converter uses software method, you doesn't need any inverter part.
+
+
+Commands From System To Keyboard
+
+    0x01 Reset
+            Keyboard responds with following byte sequence:
+            Success: 0xFF 0x04 0x7F
+            Fail:    0x7E 0x01 0x7F
+    0x02 Bell On
+    0x03 Bell Off
+    0x0A Click On
+    0x0B Click Off
+    0x0E LED
+            followed by LED status byte:
+            bit: 3       2       1       0
+            LED: CapsLk  ScrLk   Compose NumLk
+    0x0F Layout
+            Keyboard responds with 'Layout Response' 0xFE 0xXX
+
+Commands From Keyboard To System
+
+    0x7F Idle
+            means no keys pressed.
+    0xFE Layout Response
+    0xFF Reset Response(followed by 0x04)
+     
+References
+
+* http://kentie.net/article/sunkbd/page2.htm
+* http://kentie.net/article/sunkbd/KBD.pdf

keyboards/converter/sun_usb/rules.mk

@@ -0,0 +1,44 @@
+MCU = atmega32u4       # Teensy 2.0
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+BOOTLOADER = lufa-dfu
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes        # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = yes         # Console for debug(+400)
+COMMAND_ENABLE = yes         # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+UNICODEMAP_ENABLE = yes
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+CUSTOM_MATRIX = yes
+
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+#HARDWARE_SERIAL = yes
+
+SRC += matrix.c led.c
+
+ifdef HARDWARE_SERIAL
+        SRC += protocol/serial_uart.c
+        OPT_DEFS += -DHARDWARE_SERIAL
+else
+        SRC += protocol/serial_soft.c
+endif
+
+DEFAULT_FOLDER = converter/sun_usb/type5

keyboards/converter/sun_usb/type3/keymaps/default/keymap.c

@@ -0,0 +1,29 @@
+/*
+  Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  LAYOUT(
+      KC_F10,KC_F11,  KC_F1, KC_F2, KC_F3,   KC_F4,     KC_F5,    KC_F6,     KC_F7,    KC_F8, KC_F9, KC_BSPC,  KC_VOLD, KC_MUTE, KC_VOLU,
+      KC_F12,KC_F13,  KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSLS,KC_GRV,  KC_MPRV, KC_MPLY, KC_MNXT,
+      KC_F14,KC_F15,  KC_TAB,  KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P, KC_LBRC,KC_RBRC,   KC_DEL,   KC_HOME, KC_UP,   KC_PGUP,
+      KC_F16,KC_F17,  KC_LCTL,   KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,        KC_ENT,  KC_LEFT,KC_INSERT,KC_RIGHT,
+      KC_F18,KC_F19,  KC_LSFT,     KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,KC_RCTL,  KC_END,  KC_DOWN,KC_PGDOWN,
+                      KC_LGUI,KC_LALT,                      KC_SPC,                        KC_RALT,KC_RGUI
+         ),
+};

keyboards/converter/sun_usb/type3/type3.h

@@ -0,0 +1,66 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef TYPE3_H
+#define TYPE3_H
+
+#include "quantum.h"
+
+/* Sun type 3 keyboard
+,-------.  ,-----------------------------------------------------------.  ,-----------.
+| 01| 03|  | 05| 06|     08|     0A|     0C|     0E|     10| 11| 12| 2B|  | 15| 16| 17|
+|-------|  |-----------------------------------------------------------|  |-----------|
+| 19| 1A|  | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A|  | 2D| 2E| 2F|
+|-------|  |-----------------------------------------------------------|  |-----------|
+| 31| 33|  |  35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 42  |  | 44| 45| 46|
+|-------|  |-----------------------------------------------------------|  |-----------|
+| 48| 49|  |  4C  | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57|   59   |  | 5B| 5C| 5D|
+|-------|  |-----------------------------------------------------------|  |-----------|
+| 5F| 61|  |   63   | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D|    6E| 6F|  | 70| 71| 72|
+`-------'  |-----------------------------------------------------------|  `-----------'
+           | 77 | 78  |               79                  | 7A  |   13 |
+           `-----------------------------------------------------------'
+*/
+
+
+#define LAYOUT(                                                         \
+    K01,K03,  K05,K06,    K08,    K0A,    K0C,    K0E,    K10,K11,K12,K2B,  K15,K16,K17, \
+    K19,K1A,  K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A,  K2D,K2E,K2F, \
+    K31,K33,  K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,   K42,  K44,K45,K46, \
+    K48,K49,  K4C,  K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57,      K59,  K5B,K5C,K5D, \
+    K5F,K61,  K63,   K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D,     K6E,K6F,  K70,K71,K72, \
+              K77,K78,                    K79,                    K7A,K13                \
+) { \
+    { KC_NO,  K01 , KC_NO,  K03 , KC_NO,  K05 ,  K06 , KC_NO }, \
+    {  K08 , KC_NO,  K0A , KC_NO,  K0C , KC_NO,  K0E , KC_NO }, \
+    {  K10 ,  K11 ,  K12 ,  K13 , KC_NO,  K15 ,  K16 ,  K17  }, \
+    { KC_NO,  K19 ,  K1A , KC_NO, KC_NO,  K1D ,  K1E ,  K1F  }, \
+    {  K20 ,  K21 ,  K22 ,  K23 ,  K24 ,  K25 ,  K26 ,  K27  }, \
+    {  K28 ,  K29 ,  K2A ,  K2B , KC_NO,  K2D ,  K2E ,  K2F  }, \
+    { KC_NO,  K31 , KC_NO,  K33 , KC_NO,  K35 ,  K36 ,  K37  }, \
+    {  K38 ,  K39 ,  K3A ,  K3B ,  K3C ,  K3D ,  K3E ,  K3F  }, \
+    {  K40 ,  K41 ,  K42 , KC_NO,  K44 ,  K45 ,  K46 , KC_NO }, \
+    {  K48 ,  K49 , KC_NO, KC_NO,  K4C ,  K4D ,  K4E ,  K4F  }, \
+    {  K50 ,  K51 ,  K52 ,  K53 ,  K54 ,  K55 ,  K56 ,  K57  }, \
+    {  K58 ,  K59 , KC_NO,  K5B ,  K5C ,  K5D , KC_NO,  K5F  }, \
+    { KC_NO,  K61 , KC_NO,  K63 ,  K64 ,  K65 ,  K66 ,  K67  }, \
+    {  K68 ,  K69 ,  K6A ,  K6B ,  K6C ,  K6D ,  K6E ,  K6F  }, \
+    {  K70 ,  K71 ,  K72 , KC_NO, KC_NO, KC_NO, KC_NO,  K77  }, \
+    {  K78 ,  K79 ,  K7A , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }  \
+}
+
+#endif

keyboards/converter/sun_usb/type5/keymaps/default/keymap.c

@@ -0,0 +1,30 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* LAYOUT_jp_unix is a superset of the other layouts, hence the default */
+  LAYOUT_jp_unix(
+      KC_HELP,              KC_NO,   KC_F1,KC_F2,KC_F3,KC_F4, KC_F5,KC_F6,KC_F7,KC_F8, KC_F9,KC_F10,KC_F11,KC_F12,   KC_PSCR,KC_SLCK,KC_PAUS,  KC_MUTE,KC_VOLD,KC_VOLU,KC_PWR,
+      KC_STOP,   KC_AGAIN,  KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSLS,KC_GRV,  KC_INS, KC_HOME,KC_PGUP,  KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS,
+      KC_MENU,   KC_UNDO,   KC_TAB,  KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,  KC_BSPC,    KC_DEL, KC_END, KC_PGDN,  KC_P7,  KC_P8, KC_P9,  KC_PPLS,
+      KC_SELECT, KC_COPY,   KC_LCTL,   KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,     KC_ENT,                               KC_P4,  KC_P5, KC_P6,
+      KC_EXECUTE,KC_PASTE,  KC_LSFT,     KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,      KC_RSFT,            KC_UP,            KC_P1,  KC_P2, KC_P3,  KC_PENT,
+      KC_FIND,   KC_CUT,    KC_CAPS,KC_LALT,KC_LGUI,KC_HENK,    KC_SPC,     KC_MHEN,KC_KANA,KC_RGUI,KC_APP,KC_RALT,  KC_LEFT,KC_DOWN,KC_RGHT,      KC_P0,     KC_PDOT
+                 ),
+};

keyboards/converter/sun_usb/type5/keymaps/sigma/keymap.c

@@ -0,0 +1,31 @@
+/*
+Copyright 2018 Yann Hodique <yann.hodique@gmail.com> @sigma
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include QMK_KEYBOARD_H
+#include "sigma.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] =
+  {
+   [_QWERTY] = LAYOUT_us_unix(
+      KC_LEAD,                 KC_SCRT, KC_F1,KC_F2,KC_F3,KC_F4, KC_F5,KC_F6,KC_F7,KC_F8, KC_F9,KC_F10,KC_F11,KC_F12,   KC_PSCR,KC_SLCK,KC_PAUS,  KC_MUTE,KC_VOLD,KC_VOLU,KC_OS_LOCK,
+      KC_STOP,   KC_OS_REDO,   KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSLS,KC_GRV,  KC_INS, KC_HOME,KC_PGUP,  KC_NLCK,KC_PSLS,KC_PAST,KC_PMNS,
+      VRSN,      KC_OS_UNDO,   KC_TAB,  KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,  KC_BSPC,    KC_DEL, KC_END, KC_PGDN,  KC_P7,  KC_P8, KC_P9,  KC_PPLS,
+      KC_MAKE,   KC_OS_COPY,   KC_LCTL,   KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,     KC_ENT,                               KC_P4,  KC_P5, KC_P6,
+      KC_EXECUTE,KC_OS_PASTE,  KC_LSFT,     KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,      KC_RSFT,           KC_UP,             KC_P1,  KC_P2, KC_P3,  KC_PENT,
+      KC_FIND,   KC_OS_CUT,    KC_CAPS,KC_LGUI,KC_LALT,              KC_SPC,                   KC_RGUI,KC_APP,KC_RALT,  KC_LEFT,KC_DOWN,KC_RGHT,  KC_P0,         KC_PDOT
+                              ),
+  };

keyboards/converter/sun_usb/type5/keymaps/sigma/readme.md

@@ -0,0 +1,12 @@
+Overview
+========
+
+This is my personal Sun Type 5 configuration.
+
+How to build
+------------
+
+    make converter/sun_usb/type5:sigma:teensy
+
+Layers
+------

keyboards/converter/sun_usb/type5/keymaps/sigma/rules.mk

@@ -0,0 +1 @@
+BOOTLOADER = halfkay

keyboards/converter/sun_usb/type5/type5.h

@@ -0,0 +1,148 @@
+/*
+  Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef TYPE5_H
+#define TYPE5_H
+
+#include "quantum.h"
+
+/* sun type 5 keyboard, JP Unix-style
+,-------.  ,---,  ,---------------. ,---------------. ,---------------.   ,-----------. ,---------------.
+|   76  |  | 0F|  | 05| 06| 08| 0A| | 0C| 0E| 10| 11| | 12| 07| 09| 0B|   | 16| 17| 15| | 2D| 02| 04| 30|
+`-------'  `---'  `---------------' `---------------' `---------------'   `-----------' `---------------'
+,-------.  ,-----------------------------------------------------------.  ,-----------. ,---------------.
+| 01| 03|  | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A|  | 2C| 34| 60| | 62| 2E| 2F| 47|
+|-------|  |-----------------------------------------------------------|  |------------ |---------------|
+| 19| 1A|  |  35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 2B  |  | 42| 4A| 7B| | 44| 45| 46|   |
+|-------|  |-----------------------------------------------------------|  `-----------' |-----------| 7D|
+| 31| 33|  |  4C  | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57|   59   |                | 5B| 5C| 5D|   |
+|-------|  |-----------------------------------------------------------|      ,---.     |-----------|---|
+| 48| 49|  |   63   | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D|    6E    |      | 14|     | 70| 71| 72|   |
+|-------|  |-----------------------------------------------------------|  .-----------. |-----------| 5A|
+| 5F| 61|  | 77 | 13| 78 |*73 |       79         |*74 |*75| 7A | 43| 0D|  | 18| 1B| 1C| |   5E  | 32|   |
+`-------'  `-----------------------------------------------------------'  `-----------' `---------------'
+*/
+#define LAYOUT_jp_unix(                                                 \
+      K76,    K0F,  K05,K06,K08,K0A,   K0C,K0E,K10,K11,   K12,K07,K09,K0B,  K16,K17,K15,  K2D,K02,K04,K30, \
+    K01,K03,  K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A,  K2C,K34,K60,  K62,K2E,K2F,K47, \
+    K19,K1A,  K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,   K2B,  K42,K4A,K7B,  K44,K45,K46,K7D, \
+    K31,K33,  K4C,  K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57,      K59,                K5B,K5C,K5D,     \
+    K48,K49,  K63,   K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D,         K6E,      K14,      K70,K71,K72,K5A, \
+    K5F,K61,  K77,K13, K78, K73,        K79,      K74, K75, K7A, K43, K0D,  K18,K1B,K1C,  K5E,    K32      \
+) { \
+    { KC_NO,  K01 ,  K02 ,  K03 ,  K04 ,  K05 ,  K06 ,  K07  }, \
+    {  K08 ,  K09 ,  K0A ,  K0B ,  K0C ,  K0D ,  K0E ,  K0F ,}, \
+    {  K10 ,  K11 ,  K12 ,  K13 ,  K14 ,  K15 ,  K16 ,  K17  }, \
+    {  K18 ,  K19 ,  K1A ,  K1B ,  K1C ,  K1D ,  K1E ,  K1F  }, \
+    {  K20 ,  K21 ,  K22 ,  K23 ,  K24 ,  K25 ,  K26 ,  K27  }, \
+    {  K28 ,  K29 ,  K2A ,  K2B ,  K2C ,  K2D ,  K2E ,  K2F  }, \
+    {  K30 ,  K31 ,  K32 ,  K33 ,  K34 ,  K35 ,  K36 ,  K37  }, \
+    {  K38 ,  K39 ,  K3A ,  K3B ,  K3C ,  K3D ,  K3E ,  K3F  }, \
+    {  K40 ,  K41 ,  K42 ,  K43 ,  K44 ,  K45 ,  K46 ,  K47  }, \
+    {  K48 ,  K49 ,  K4A , KC_NO,  K4C ,  K4D ,  K4E ,  K4F  }, \
+    {  K50 ,  K51 ,  K52 ,  K53 ,  K54 ,  K55 ,  K56 ,  K57  }, \
+    {  K58 ,  K59 ,  K5A ,  K5B ,  K5C ,  K5D ,  K5E ,  K5F  }, \
+    {  K60 ,  K61 ,  K62 ,  K63 ,  K64 ,  K65 ,  K66 ,  K67  }, \
+    {  K68 ,  K69 ,  K6A ,  K6B ,  K6C ,  K6D ,  K6E , KC_NO }, \
+    {  K70 ,  K71 ,  K72 ,  K73 ,  K74 ,  K75 ,  K76 ,  K77  }, \
+    {  K78 ,  K79 ,  K7A ,  K7B , KC_NO,  K7D , KC_NO, KC_NO }  \
+}
+
+/* Sun type 5 keyboard, US Unix-style
+,-------.  ,---,  ,---------------. ,---------------. ,---------------.   ,-----------. ,---------------.
+|   76  |  | 0F|  | 05| 06| 08| 0A| | 0C| 0E| 10| 11| | 12| 07| 09| 0B|   | 16| 17| 15| | 2D| 02| 04| 30|
+`-------'  `---'  `---------------' `---------------' `---------------'   `-----------' `---------------'
+,-------.  ,-----------------------------------------------------------.  ,-----------. ,---------------.
+| 01| 03|  | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A|  | 2C| 34| 60| | 62| 2E| 2F| 47|
+|-------|  |-----------------------------------------------------------|  |------------ |---------------|
+| 19| 1A|  |  35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 2B  |  | 42| 4A| 7B| | 44| 45| 46|   |
+|-------|  |-----------------------------------------------------------|  `-----------' |-----------| 7D|
+| 31| 33|  |  4C  | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57|   59   |                | 5B| 5C| 5D|   |
+|-------|  |-----------------------------------------------------------|      ,---.     |-----------|---|
+| 48| 49|  |   63   | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D|    6E    |      | 14|     | 70| 71| 72|   |
+|-------|  |-----------------------------------------------------------|  .-----------. |-----------| 5A|
+| 5F| 61|  | 77 | 13| 78 |            79                 |  7A | 43| 0D|  | 18| 1B| 1C| |   5E  | 32|   |
+`-------'  `-----------------------------------------------------------'  `-----------' `---------------'
+*/
+#define LAYOUT_us_unix(                                                 \
+      K76,    K0F,  K05,K06,K08,K0A,   K0C,K0E,K10,K11,   K12,K07,K09,K0B,  K16,K17,K15,  K2D,K02,K04,K30, \
+    K01,K03,  K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A,  K2C,K34,K60,  K62,K2E,K2F,K47, \
+    K19,K1A,  K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,   K2B,  K42,K4A,K7B,  K44,K45,K46,K7D, \
+    K31,K33,  K4C,  K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57,      K59,                K5B,K5C,K5D,     \
+    K48,K49,  K63,   K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D,         K6E,      K14,      K70,K71,K72,K5A, \
+    K5F,K61,  K77,K13, K78,             K79,                K7A, K43, K0D,  K18,K1B,K1C,  K5E,    K32      \
+) { \
+    { KC_NO,  K01 ,  K02 ,  K03 ,  K04 ,  K05 ,  K06 ,  K07  }, \
+    {  K08 ,  K09 ,  K0A ,  K0B ,  K0C ,  K0D ,  K0E ,  K0F ,}, \
+    {  K10 ,  K11 ,  K12 ,  K13 ,  K14 ,  K15 ,  K16 ,  K17  }, \
+    {  K18 ,  K19 ,  K1A ,  K1B ,  K1C ,  K1D ,  K1E ,  K1F  }, \
+    {  K20 ,  K21 ,  K22 ,  K23 ,  K24 ,  K25 ,  K26 ,  K27  }, \
+    {  K28 ,  K29 ,  K2A ,  K2B ,  K2C ,  K2D ,  K2E ,  K2F  }, \
+    {  K30 ,  K31 ,  K32 ,  K33 ,  K34 ,  K35 ,  K36 ,  K37  }, \
+    {  K38 ,  K39 ,  K3A ,  K3B ,  K3C ,  K3D ,  K3E ,  K3F  }, \
+    {  K40 ,  K41 ,  K42 ,  K43 ,  K44 ,  K45 ,  K46 ,  K47  }, \
+    {  K48 ,  K49 ,  K4A , KC_NO,  K4C ,  K4D ,  K4E ,  K4F  }, \
+    {  K50 ,  K51 ,  K52 ,  K53 ,  K54 ,  K55 ,  K56 ,  K57  }, \
+    {  K58 ,  K59 ,  K5A ,  K5B ,  K5C ,  K5D ,  K5E ,  K5F  }, \
+    {  K60 ,  K61 ,  K62 ,  K63 ,  K64 ,  K65 ,  K66 ,  K67  }, \
+    {  K68 ,  K69 ,  K6A ,  K6B ,  K6C ,  K6D ,  K6E , KC_NO }, \
+    {  K70 ,  K71 ,  K72 , KC_NO, KC_NO, KC_NO,  K76 ,  K77  }, \
+    {  K78 ,  K79 ,  K7A ,  K7B , KC_NO,  K7D , KC_NO, KC_NO }  \
+}
+
+/* Sun type 5 keyboard, US ANSI-style
+   ,-------.  ,---,  ,---------------. ,---------------. ,---------------.   ,-----------. ,---------------.
+   |   76  |  | 1D|  | 05| 06| 08| 0A| | 0C| 0E| 10| 11| | 12| 07| 09| 0B|   | 16| 17| 15| | 2D| 02| 04| 30|
+   `-------'  `---'  `---------------' `---------------' `---------------'   `-----------' `---------------'
+   ,-------.  ,-----------------------------------------------------------.  ,-----------. ,---------------.
+   | 01| 03|  | 2A| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29|   2B  |  | 2C| 34| 60| | 62| 2E| 2F| 47|
+   |-------|  |-----------------------------------------------------------|  |------------ |---------------|
+   | 19| 1A|  |  35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 58  |  | 42| 4A| 7B| | 44| 45| 46|   |
+   |-------|  |-----------------------------------------------------------|  `-----------' |-----------| 7D|
+   | 31| 33|  |  77  | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57|   59   |                | 5B| 5C| 5D|   |
+   |-------|  |-----------------------------------------------------------|      ,---.     |-----------|---|
+   | 48| 49|  |   63   | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D|    6E    |      | 14|     | 70| 71| 72|   |
+   |-------|  |-----------------------------------------------------------|  .-----------. |-----------| 5A|
+   | 5F| 61|  |  4C  | 13| 78 |              79              | 7A | 43| 0D|  | 18| 1B| 1C| |   5E  | 32|   |
+   `-------'  `-----------------------------------------------------------'  `-----------' `---------------'
+*/
+#define LAYOUT_ansi(                                                    \
+      K76,    K1D,  K05,K06,K08,K0A,   K0C,K0E,K10,K11,   K12,K07,K09,K0B,  K16,K17,K15,  K2D,K02,K04,K30, \
+    K01,K03,  K2A,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,    K2B,  K2C,K34,K60,  K62,K2E,K2F,K47, \
+    K19,K1A,  K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41,   K58,  K42,K4A,K7B,  K44,K45,K46,K7D, \
+    K31,K33,  K77,  K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57,      K59,                K5B,K5C,K5D,     \
+    K48,K49,  K63,   K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D,         K6E,      K14,      K70,K71,K72,K5A, \
+    K5F,K61,  K4C,K13, K78,              K79,               K7A, K43, K0D,  K18,K1B,K1C,  K5E,    K32      \
+) { \
+    { KC_NO,  K01 ,  K02 ,  K03 ,  K04 ,  K05 ,  K06 ,  K07  }, \
+    {  K08 ,  K09 ,  K0A ,  K0B ,  K0C ,  K0D ,  K0E , KC_NO,}, \
+    {  K10 ,  K11 ,  K12 ,  K13 ,  K14 ,  K15 ,  K16 ,  K17  }, \
+    {  K18 ,  K19 ,  K1A ,  K1B ,  K1C ,  K1D ,  K1E ,  K1F  }, \
+    {  K20 ,  K21 ,  K22 ,  K23 ,  K24 ,  K25 ,  K26 ,  K27  }, \
+    {  K28 ,  K29 ,  K2A ,  K2B ,  K2C ,  K2D ,  K2E ,  K2F  }, \
+    {  K30 ,  K31 ,  K32 ,  K33 ,  K34 ,  K35 ,  K36 ,  K37  }, \
+    {  K38 ,  K39 ,  K3A ,  K3B ,  K3C ,  K3D ,  K3E ,  K3F  }, \
+    {  K40 ,  K41 ,  K42 ,  K43 ,  K44 ,  K45 ,  K46 ,  K47  }, \
+    {  K48 ,  K49 ,  K4A , KC_NO,  K4C ,  K4D ,  K4E ,  K4F  }, \
+    {  K50 ,  K51 ,  K52 ,  K53 ,  K54 ,  K55 ,  K56 ,  K57  }, \
+    {  K58 ,  K59 ,  K5A ,  K5B ,  K5C ,  K5D ,  K5E ,  K5F  }, \
+    {  K60 ,  K61 ,  K62 ,  K63 ,  K64 ,  K65 ,  K66 ,  K67  }, \
+    {  K68 ,  K69 ,  K6A ,  K6B ,  K6C ,  K6D ,  K6E , KC_NO }, \
+    {  K70 ,  K71 ,  K72 , KC_NO, KC_NO, KC_NO,  K76 ,  K77  }, \
+    {  K78 ,  K79 ,  K7A ,  K7B , KC_NO,  K7D , KC_NO, KC_NO }  \
+}
+#endif

keyboards/crkbd/keymaps/drashna/config.h

@@ -34,10 +34,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define TAPPING_FORCE_HOLD
 // #define TAPPING_TERM 100
 
+#ifdef RGBLIGHT_ENABLE
 #undef RGBLED_NUM
-#define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 27
+
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
 #define RGBLIGHT_LIMIT_VAL 120
-#define RGBLIGHT_HUE_STEP 10
-#define RGBLIGHT_SAT_STEP 17
-#define RGBLIGHT_VAL_STEP 17
+#endif

keyboards/crkbd/keymaps/drashna/keymap.c

@@ -20,37 +20,48 @@ enum crkbd_keycodes {
   RGBRST = NEW_SAFE_RANGE
 };
 
+#define LAYOUT_crkbd_base( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
+  ) \
+  LAYOUT_wrapper( \
+    KC_ESC,  K01,    K02,     K03,      K04,     K05,                        K06,     K07,     K08,     K09,     K0A,     KC_BSPC, \
+    KC_TAB,  K11,    K12,     K13,      K14,     K15,                        K16,     K17,     K18,     K19,     K1A,     KC_QUOT, \
+    KC_MLSF, CTL_T(K21), K22, K23,      K24,     K25,                        K26,     K27,     K28,     K29,  CTL_T(K2A), KC_MRSF, \
+                           LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,         KC_DEL,  KC_ENT,  RAISE                                    \
+  )
+#define LAYOUT_crkbd_base_wrapper(...)       LAYOUT_crkbd_base(__VA_ARGS__)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-  [_QWERTY] = LAYOUT_wrapper(
-    KC_ESC,  _________________QWERTY_L1_________________,                    _________________QWERTY_R1_________________, KC_BSPC,
-    KC_TAB,  _________________QWERTY_L2_________________,                    _________________QWERTY_R2_________________, KC_QUOT,
-    KC_MLSF, _________________QWERTY_L3_________________,                    _________________QWERTY_R3_________________, KC_MRSF,
-                           LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,         KC_DEL,  KC_ENT,  RAISE
+  [_QWERTY] = LAYOUT_crkbd_base_wrapper(
+    _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
+    _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
+    _________________QWERTY_L3_________________, _________________QWERTY_R3_________________
   ),
-  [_COLEMAK] = LAYOUT_wrapper(
-    KC_ESC,  _________________QWERTY_L1_________________,                    _________________QWERTY_R1_________________, KC_BSPC,
-    KC_TAB,  _________________QWERTY_L2_________________,                    _________________QWERTY_R2_________________, KC_QUOT,
-    KC_MLSF, _________________QWERTY_L3_________________,                    _________________QWERTY_R3_________________, KC_MRSF,
-                           LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,         KC_DEL,  KC_ENT,  RAISE
+
+  [_COLEMAK] = LAYOUT_crkbd_base_wrapper(
+    _________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
+    _________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
+    _________________COLEMAK_L3________________, _________________COLEMAK_R3________________
   ),
-  [_DVORAK] = LAYOUT_wrapper(
-    KC_ESC,  _________________QWERTY_L1_________________,                    _________________QWERTY_R1_________________, KC_BSPC,
-    KC_TAB,  _________________QWERTY_L2_________________,                    _________________QWERTY_R2_________________, KC_QUOT,
-    KC_MLSF, _________________QWERTY_L3_________________,                    _________________QWERTY_R3_________________, KC_MRSF,
-                           LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,         KC_DEL,  KC_ENT,  RAISE
+
+  [_DVORAK] = LAYOUT_crkbd_base_wrapper(
+    _________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
+    _________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
+    _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
   ),
-  [_WORKMAN] = LAYOUT_wrapper(
-    KC_ESC,  _________________QWERTY_L1_________________,                    _________________QWERTY_R1_________________, KC_BSPC,
-    KC_TAB,  _________________QWERTY_L2_________________,                    _________________QWERTY_R2_________________, KC_QUOT,
-    KC_MLSF, _________________QWERTY_L3_________________,                    _________________QWERTY_R3_________________, KC_MRSF,
-                           LT(_LOWER,KC_GRV), KC_SPC,  KC_BSPC,         KC_DEL,  KC_ENT,  RAISE
+
+  [_WORKMAN] = LAYOUT_crkbd_base_wrapper(
+    _________________WORKMAN_L1________________, _________________WORKMAN_R1________________,
+    _________________WORKMAN_L2________________, _________________WORKMAN_R2________________,
+    _________________WORKMAN_L3________________, _________________WORKMAN_R3________________
   ),
 
   [_MODS] = LAYOUT_wrapper(
-      _______, _______, _______, _______, _______, _______,                  _______, _______, _______, _______, _______, _______,
-      _______, _______, _______, _______, _______, _______,                  _______, _______, _______, _______, _______, _______,
-      KC_LSFT, _______, _______, _______, _______, _______,                  _______, _______, _______, _______, _______, KC_RSFT,
+      _______, ___________________BLANK___________________,                  ___________________BLANK___________________, _______,
+      _______, ___________________BLANK___________________,                  ___________________BLANK___________________, _______,
+      KC_LSFT, ___________________BLANK___________________,                  ___________________BLANK___________________, KC_RSFT,
                                      _______, _______, _______,        _______, _______, _______
   ),
 
@@ -65,7 +76,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_GRV,  _________________RAISE_L1__________________,                    _________________RAISE_R1__________________, KC_BSPC,
     _______, _________________RAISE_L2__________________,                    _________________RAISE_R2__________________, KC_BSLS,
     _______, _________________RAISE_L3__________________,                    _________________RAISE_R3__________________, _______,
-                                     _______, _______, _______,        _______, _______, _______                              //`--------------------'  `--------------------'
+                                     _______, _______, _______,        _______, _______, _______
   ),
 
   [_ADJUST] = LAYOUT_wrapper( \

keyboards/dc01/left/config.h

@@ -46,6 +46,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F4, F1, F0, F7, F6, F5 }
 #define UNUSED_PINS
 
+#define F_SCL 300000UL
+
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 

keyboards/dc01/left/matrix.c

@@ -43,7 +43,7 @@ static uint8_t error_count_arrow = 0;
 /* Set 0 if debouncing isn't needed */
 
 #ifndef DEBOUNCING_DELAY
-#   define DEBOUNCING_DELAY 5
+#    define DEBOUNCING_DELAY 5
 #endif
 
 #if (DEBOUNCING_DELAY > 0)
@@ -135,10 +135,7 @@ uint8_t matrix_cols(void) {
     return MATRIX_COLS;
 }
 
-
 i2c_status_t i2c_transaction(uint8_t address, uint32_t mask, uint8_t col_offset);
-//uint8_t i2c_transaction_numpad(void);
-//uint8_t i2c_transaction_arrow(void);
 
 //this replases tmk code
 void matrix_setup(void){
@@ -220,7 +217,7 @@ uint8_t matrix_scan(void)
                 matrix[i] &= 0x3F; //mask bits to keep
             }
         }
-    }else{ //no error
+   }else{ //no error
         error_count_right = 0;
     }
     
@@ -440,40 +437,28 @@ static void unselect_cols(void)
 // Complete rows from other modules over i2c
 i2c_status_t i2c_transaction(uint8_t address, uint32_t mask, uint8_t col_offset) {
     i2c_status_t err = i2c_start((address << 1) | I2C_WRITE, 10);
-    if (err) return err;
-    i2c_write(0x01, 10);
-    if (err) return err;
+    i2c_write(0x01, 10); //request data in address 1
 
-    i2c_start((address << 1) | I2C_READ, 10);
-    if (err) return err;
+    i2c_start((address << 1) | I2C_READ, 5);
 
     err = i2c_read_ack(10);
     if (err == 0x55) { //synchronization byte
 
-    for (uint8_t i = 0; i < MATRIX_ROWS-1 ; i++) { //assemble slave matrix in main matrix
-        matrix[i] &= mask; //mask bits to keep
-        err = i2c_read_ack(10);
-        if (err >= 0) {
-            matrix[i] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
-        } else {
-             return err;
-        }
-      }
-    //last read request must be followed by a NACK
-    matrix[MATRIX_ROWS - 1] &= mask; //mask bits to keep
-    err = i2c_read_nack(10);
-    if (err >= 0) {
+        for (uint8_t i = 0; i < MATRIX_ROWS-1 ; i++) { //assemble slave matrix in main matrix
+            matrix[i] &= mask; //mask bits to keep
+            err = i2c_read_ack(10);
+                matrix[i] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
+            }
+        //last read request must be followed by a NACK
+        matrix[MATRIX_ROWS - 1] &= mask; //mask bits to keep
+        err = i2c_read_nack(10);
         matrix[MATRIX_ROWS - 1] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
-        } else {
-            return err;
-        }
+
     } else {
         i2c_stop(10);
         return 1;
     }
 
     i2c_stop(10);
-    if (err) return err;
-
     return 0;
 }

keyboards/dz60/dz60.h

@@ -70,7 +70,7 @@
  * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
  * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
  * │30      │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d    │3e │
- * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴──────┬┴───┴┬───┬─┴───┤
+ * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┤
  * │▓▓▓▓▓│41 │43   │46 (7u)                    │4b   │4d │▓▓▓▓▓│
  * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘
 */
@@ -224,4 +224,58 @@
     { k40,  k41,   KC_NO, k43,  KC_NO, KC_NO, k46,  KC_NO, KC_NO, KC_NO, k4a,  k4b,  k4c,   k4d,   k4e   }  \
 }
 
+/* LAYOUT_60_b_ansi (maximized DZ60 Plate B layout for ANSI)
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤
+ * │30      │32 │33 │34 │35 │36 │37 │38 │39 │3a │3c    │3d │3e │
+ * ├────┬───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴──┬┴──┬───┼───┼───┤
+ * │40  │41  │43  │44      │46  │48        │4a │4b │4c │4d │4e │
+ * └────┴────┴────┴────────┴────┴──────────┴───┴───┴───┴───┴───┘
+*/
+#define LAYOUT_60_b_ansi( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d,      \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3a,      k3c, k3d, k3e, \
+    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b, k4c, k4d, k4e  \
+) { \
+    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,   k0c,  k0d,  k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,   k1c,  k1d,  k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,   k2c,  k2d,  KC_NO }, \
+    { k30,  KC_NO, k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  KC_NO, k3c,  k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   k4c,  k4d,  k4e   }  \
+}
+
+/* LAYOUT_60_b_iso (maximized DZ60 Plate B layout for ISO)
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │0e │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐2d  │
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │1e │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬──┴────┤
+ * │30  │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3c    │3d │3e │
+ * ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴──┬┴──┬───┼───┼───┤
+ * │40  │41  │43  │44      │46  │48        │4a │4b │4c │4d │4e │
+ * └────┴────┴────┴────────┴────┴──────────┴───┴───┴───┴───┴───┘
+*/
+#define LAYOUT_60_b_iso( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d,      \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a,      k3c, k3d, k3e, \
+    k40, k41,      k43, k44,      k46,      k48,      k4a, k4b, k4c, k4d, k4e  \
+) { \
+    { k00,  k01,   k02,   k03,  k04,  k05,   k06,  k07,   k08,  k09,   k0a,  k0b,   k0c,  k0d,  k0e   }, \
+    { k10,  KC_NO, k12,   k13,  k14,  k15,   k16,  k17,   k18,  k19,   k1a,  k1b,   k1c,  k1d,  k1e   }, \
+    { k20,  KC_NO, k22,   k23,  k24,  k25,   k26,  k27,   k28,  k29,   k2a,  k2b,   k2c,  k2d,  KC_NO }, \
+    { k30,  k31,   k32,   k33,  k34,  k35,   k36,  k37,   k38,  k39,   k3a,  KC_NO, k3c,  k3d,  k3e   }, \
+    { k40,  k41,   KC_NO, k43,  k44,  KC_NO, k46,  KC_NO, k48,  KC_NO, k4a,  k4b,   k4c,  k4d,  k4e   }  \
+}
+
 #endif

keyboards/dz60/info.json

@@ -36,6 +36,14 @@
     "LAYOUT_60_iso_5x1u": {
       "key_count": 63,
       "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"CapsLock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"|", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"~", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"/", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Fn", "x":10, "y":4}, {"label":"←", "x":11, "y":4}, {"label":"↓", "x":12, "y":4}, {"label":"↑", "x":13, "y":4}, {"label":"→", "x":14, "y":4}]
+    },
+    "LAYOUT_60_b_ansi": {
+      "key_count": 66,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"x":13, "y":0}, {"label":"Back Space", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"\\", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"Shift", "x":11.25, "y":3, "w":1.75}, {"label":"Up", "x":13, "y":3}, {"label":"Del", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"label":"Space", "x":3.75, "y":4, "w":2.25}, {"label":"Space", "x":6, "y":4, "w":1.25}, {"label":"Space", "x":7.25, "y":4, "w":2.75}, {"label":"Alt", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Left", "x":12, "y":4}, {"label":"Down", "x":13, "y":4}, {"label":"Right", "x":14, "y":4}]
+    },
+    "LAYOUT_60_b_iso": {
+      "key_count": 67,
+      "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"x":13, "y":0}, {"label":"Back Space", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"#", "x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"\\", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"Shift", "x":11.25, "y":3, "w":1.75}, {"label":"Up", "x":13, "y":3}, {"label":"Del", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"GUI", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"label":"Space", "x":3.75, "y":4, "w":2.25}, {"label":"Space", "x":6, "y":4, "w":1.25}, {"label":"Space", "x":7.25, "y":4, "w":2.75}, {"label":"AltGr", "x":10, "y":4}, {"label":"Fn", "x":11, "y":4}, {"label":"Left", "x":12, "y":4}, {"label":"Down", "x":13, "y":4}, {"label":"Right", "x":14, "y":4}]
     }
   }
 }

keyboards/dz60/keymaps/60_ansi/keymap.c

@@ -0,0 +1,18 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT_60_ansi(
+		KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,           KC_BSPC,
+		KC_TAB,           KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+		KC_CAPS,          KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+		KC_LSFT,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,
+		KC_LCTL, KC_LGUI,          KC_LALT,                   KC_SPC,                             KC_RALT, KC_RGUI,          MO(1),   KC_RCTL),
+
+	LAYOUT_60_ansi(
+		KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_DEL,
+		KC_TRNS,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET,
+		KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  KC_HOME, KC_PGUP, KC_TRNS,
+		KC_TRNS,          KC_TRNS, KC_TRNS, BL_DEC,  BL_TOGG, BL_INC,  BL_STEP, KC_TRNS, KC_DEL,  KC_END,  KC_PGDN,          KC_TRNS,
+		KC_TRNS, KC_TRNS,          KC_TRNS,                   KC_TRNS,                            KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS)
+};

keyboards/dz60/keymaps/60_ansi/readme.md

@@ -0,0 +1,9 @@
+![60_ansi DZ60 base layer](https://i.imgur.com/MqBLh3D.png)
+
+![60_ansi DZ60 fn layer](https://i.imgur.com/ml1djHi.png)
+
+# 60_ansi DZ60 Layout
+
+This is a basic keymap for the 60_ansi layout of the DZ60.
+The default layer is normal ANSI and the Fn layer is used for RGB
+and backlighting functions.

keyboards/dz60/keymaps/boris_burger/README.md

@@ -0,0 +1,52 @@
+### boris_burger's DZ60 layout
+
+This layout is for a DZ60 with a 2U left shift, 1U right shift and an arrow cluster in
+the bottom right.
+
+It is based off stephengrier's layout adding support for Home/End/PgUp/PgDn using Fn+arrows
+as used on macOS and Microsoft Surface. It has Insert instead of Fn near the arrow cluster
+and other smaller tweaks:
+- CapsLock is the only Fn key (CapsLock by itself is not available)
+- Del is available as Fn+Backspace
+- Ctrl+Del is available as Ctrl+Backspace (e.g. deleting word to the right of the cursor)
+- Shift+Del is available as Shift+Backspace (e.g. permanently deleting file or e-mail)
+- PgUp = Fn+Up
+- PgDn = Fn+Down
+- Home = Fn+Left
+- End = Fn+Right
+- Tilde = Shift+Esc 
+- Backtick = Fn+Esc
+- Underglow toggle and mode selection are available as Fn+Q and Fn+W
+- Reset (bootloader mode) = Fn+B
+
+### 0 Qwerty
+```
+,-----------------------------------------------------------------------------------------.
+| Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |
+|-----------------------------------------------------------------------------------------+
+| Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+|-----------------------------------------------------------------------------------------+
+|   Fn    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+|-----------------------------------------------------------------------------------------+
+| Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RSh |  U  | Ins |
+|-----------------------------------------------------------------------------------------+
+| Ctrl |  Win  |  Alt  |              Space                | Alt | Menu |  L  |  D  |  R  |
+`-----------------------------------------------------------------------------------------'
+```
+
+### 1 Fn Layer
+```
+FN Layer
+,-----------------------------------------------------------------------------------------.
+|  `  |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |    DEL    |
+|-----------------------------------------------------------------------------------------+
+|        |RBB T|RGB M| Hue+| Hue-| Sat+| Sat-| Val+| Val-|     |     |      |     |       |
+|-----------------------------------------------------------------------------------------+
+|         | BL T| BL M| BL+ | BL- |     |     |     |     |     |     |     |             |
+|-----------------------------------------------------------------------------------------+
+|           |     |     |     |     |RESET|     |     |     |     |     |     | PgUp|     |
+|-----------------------------------------------------------------------------------------+
+|      |       |       |                                   |     |      | Home| PgDn| End |
+`-----------------------------------------------------------------------------------------'
+```
+

keyboards/dz60/keymaps/boris_burger/config.h

@@ -0,0 +1 @@
+#define GRAVE_ESC_GUI_OVERRIDE    # Always send Escape if GUI is pressed

keyboards/dz60/keymaps/boris_burger/keymap.c

@@ -0,0 +1,87 @@
+#include QMK_KEYBOARD_H
+
+/* Holds state of modifiers when Backspace was pressed.
+ * Used to ensure that the correct keycode is unregistered when Backspace is released.
+ */
+static uint8_t bspc_mods = 0;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Qwerty
+    * ,-----------------------------------------------------------------------------------------.
+    * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |
+    * |-----------------------------------------------------------------------------------------+
+    * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+    * |-----------------------------------------------------------------------------------------+
+    * |   Fn    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+    * |-----------------------------------------------------------------------------------------+
+    * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RSh |  U  | Ins |
+    * |-----------------------------------------------------------------------------------------+
+    * | Ctrl |  Win  |  Alt  |              Space                | Alt | Menu |  L  |  D  |  R  |
+    * `-----------------------------------------------------------------------------------------'
+    */
+    LAYOUT_directional(
+        KC_GESC, KC_1   , KC_2   , KC_3   , KC_4   , KC_5   , KC_6   , KC_7   , KC_8   , KC_9   , KC_0   , KC_MINS, KC_EQL , _______, KC_BSPC,
+        KC_TAB ,          KC_Q   , KC_W   , KC_E   , KC_R   , KC_T   , KC_Y   , KC_U   , KC_I   , KC_O   , KC_P   , KC_LBRC, KC_RBRC, KC_BSLS,
+        MO(1)  ,          KC_A   , KC_S   , KC_D   , KC_F   , KC_G   , KC_H   , KC_J   , KC_K   , KC_L   , KC_SCLN, KC_QUOT, KC_ENT ,
+        KC_LSFT,          KC_Z   , KC_X   , KC_C   , KC_V   , KC_B   , KC_N   , KC_M   , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, KC_UP  , KC_INS ,
+        KC_LCTL, KC_LGUI,          KC_LALT, KC_SPC ,          KC_SPC ,          KC_SPC ,          KC_RALT, KC_RGUI, KC_LEFT, KC_DOWN, KC_RIGHT
+    ),
+
+    /* FN Layer
+    * ,-----------------------------------------------------------------------------------------.
+    * |  `  |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |    DEL    |
+    * |-----------------------------------------------------------------------------------------+
+    * |        |RBB T|RGB M| Hue+| Hue-| Sat+| Sat-| Val+| Val-|     |     |      |     |       |
+    * |-----------------------------------------------------------------------------------------+
+    * |         | BL T| BL M| BL+ | BL- |     |     |     |     |     |     |     |             |
+    * |-----------------------------------------------------------------------------------------+
+    * |           |     |     |     |     |RESET|     |     |     |     |     |     | PgUp|     |
+    * |-----------------------------------------------------------------------------------------+
+    * |      |       |       |                                   |     |      | Home| PgDn| End |
+    * `-----------------------------------------------------------------------------------------'
+    */
+    LAYOUT_directional(
+        KC_GRV , KC_F1  , KC_F2  , KC_F3  , KC_F4  , KC_F5  , KC_F6  , KC_F7  , KC_F8  , KC_F9  , KC_F10 , KC_F11 , KC_F12 , _______, KC_DEL ,
+        _______,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
+        _______,          BL_TOGG, BL_STEP, BL_INC , BL_DEC , _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,          _______, _______, _______, _______, RESET  , _______, _______, _______, _______, _______, _______, KC_PGUP, _______,
+        _______, _______,          _______, _______,          _______,          _______,          _______, _______, KC_HOME, KC_PGDN, KC_END
+        ),
+};
+
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch(keycode) {
+        case KC_BSPC: {
+            if (record->event.pressed) {
+                const uint8_t current_mods = get_mods();
+                const uint8_t shift = current_mods & (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT));
+                const uint8_t ctrl = current_mods & (MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTL));
+                bspc_mods = current_mods;
+                if(shift || ctrl) {
+                    add_key(KC_DEL);
+                    add_mods(current_mods);
+                    send_keyboard_report();
+                } else {
+                    return true;
+                }
+            }
+            else {
+                if(bspc_mods & (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTL))) {
+                    // if Shift or Ctrl was pressed with Backspace, than that was intepreted as Del, so we need
+                    // to unregister the Del key 
+                    del_key(KC_DEL);
+                } else {
+                    // Either Backspace was pressed without mods, or with a modifier other than Shift or Ctrl
+                    // so it is simply taken as Backspace
+                    del_key(KC_BSPC);
+                }
+                send_keyboard_report();
+            }
+            return false;
+        }
+        default:
+            return true;
+    }
+}

keyboards/dz60/keymaps/crd/keymap.c

@@ -0,0 +1,70 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  /* Qwerty
+   * ,-----------------------------------------------------------------------------------------.
+   * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |   Bkspc   |
+   * |-----------------------------------------------------------------------------------------+
+   * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |    \   |
+   * |-----------------------------------------------------------------------------------------+
+   * | Ctrl/Esc|  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+   * |-----------------------------------------------------------------------------------------+
+   * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RSh |  U  | DEL |
+   * |-----------------------------------------------------------------------------------------+
+   * | FN2  |  Alt  |  Cmd  |              Space                | Cmd  | FN1 |  L  |  D  |  R  |
+   * `-----------------------------------------------------------------------------------------'
+   */
+
+  LAYOUT_directional(
+      KC_GESC,       KC_1,    KC_2,    KC_3,   KC_4,   KC_5,   KC_6,    KC_7,  KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  _______, KC_BSPC,
+      KC_TAB,        KC_Q,    KC_W,    KC_E,   KC_R,   KC_T,   KC_Y,    KC_U,  KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+      CTL_T(KC_ESC), KC_A,    KC_S,    KC_D,   KC_F,   KC_G,   KC_H,    KC_J,  KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+      KC_LSFT,       KC_Z,    KC_X,    KC_C,   KC_V,   KC_B,   KC_N,    KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_DEL,
+      MO(2),         KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT
+      ),
+
+  /* FN1 Layer
+   * ,-----------------------------------------------------------------------------------------.
+   * | ` ~ |  F1 |  F2 |  F3 |  F4 |  F5 |  F6 |  F7 |  F8 |  F9 | F10 | F11 | F12 |           |
+   * |-----------------------------------------------------------------------------------------+
+   * |        |     |     |     |     |     |     |     |     |     |     |      |      |      |
+   * |-----------------------------------------------------------------------------------------+
+   * |         |     |     |     |     |     |     |     |     |     |     |     |             |
+   * |-----------------------------------------------------------------------------------------+
+   * |           |     |     |     |     |     |     |     |     |     |     |     |PgUp |     |
+   * |-----------------------------------------------------------------------------------------+
+   * |      |       |       |                                   |     |      |Home |PgDn | End |
+   * `-----------------------------------------------------------------------------------------'
+   */
+
+  LAYOUT_directional(
+      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______,
+      _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDOWN, KC_END
+      ),
+
+  /* FN2 Layer (Media)
+   * ,-----------------------------------------------------------------------------------------.
+   * |     |     |     |     |     |     |     |     |     |     |     |     |     |   RESET   |
+   * |-----------------------------------------------------------------------------------------+
+   * |        |RBB T|RGB M| Hue+| Hue-| Sat+| Sat-| Val+| Val-|     |     |      |      |      |
+   * |-----------------------------------------------------------------------------------------+
+   * |         |     |     |     |     |     |     |     |     |     |     |     |             |
+   * |-----------------------------------------------------------------------------------------+
+   * |           |     |     |     |     |     |     |     |     |     |     |Pl/Ps|Vol+ |Mute |
+   * |-----------------------------------------------------------------------------------------+
+   * |      |       |       |                                   |     |      |Prev |Vol- |Next |
+   * `-----------------------------------------------------------------------------------------'
+   */
+
+  LAYOUT_directional(
+      KC_SLEP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
+      _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_VOLU, KC_MUTE,
+      _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT
+      ),
+};

keyboards/dz60/keymaps/thomasviaud/README.md

@@ -0,0 +1,4 @@
+## French ISO Layout
+
+Here is a very simple version of a French ISO Layout (handled by OS).
+Feel free to take this as base for your own layout.

keyboards/dz60/keymaps/thomasviaud/keymap.c

@@ -0,0 +1,18 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT_60_iso(
+		KC_ESC,		KC_1, 		KC_2, 		KC_3, 		KC_4, 		KC_5, 		KC_6, 		KC_7, 		KC_8, 		KC_9, 		KC_0, 		KC_MINS, 	KC_EQL, 	     			KC_BSPC,
+		KC_TAB,					 		KC_Q,			KC_W, 		KC_E, 		KC_R, 		KC_T, 		KC_Y, 		KC_U, 		KC_I, 		KC_O, 		KC_P, 		KC_LBRC, 	KC_RBRC,	
+		KC_CAPS, 						KC_A, 		KC_S, 		KC_D,			KC_F,			KC_G,			KC_H,			KC_J,			KC_K, 		KC_L,			KC_SCLN,	KC_QUOT,  KC_NUHS	,	KC_ENT,
+		KC_LSFT, 	KC_NUBS,	KC_Z, 		KC_X,			KC_C, 		KC_V, 		KC_B, 		KC_N, 		KC_M, 		KC_COMM, 	KC_DOT, 	KC_SLSH, 						KC_RSFT,
+		KC_LCTL, 	KC_LGUI,						KC_LALT, 											KC_SPC, 																KC_RALT, 	KC_RGUI, 					 	MO(1), 		KC_RCTL),
+
+	LAYOUT_60_iso(
+		KC_GRV,		KC_F1, 		KC_F2, 		KC_F3, 		KC_F4, 		KC_F5, 		KC_F6, 		KC_F7, 		KC_F8, 		KC_F9, 		KC_F10, 	KC_F11, 	KC_F12,	      			KC_DEL,
+		_______,					 	_______, 	KC_UP, 		_______, 	_______, 	_______, 	_______, 	_______, 	_______, 	_______, 	_______,  _______, _______,	
+		_______, 						KC_LEFT, 	KC_DOWN, 	KC_RIGHT,	_______,	_______,	_______,	_______,	_______, 	_______,	_______,	_______, _______,		_______,
+		_______, 	_______,	RGB_TOG, 	RGB_MOD, 	RGB_HUI, 	RGB_HUD, 	RGB_SAI, 	RGB_SAD, 	RGB_VAI, 	RGB_VAD, 	_______, 	_______, 					 _______,
+		_______, 	_______,						_______, 											RESET, 																  _______, 	_______, 					 _______, 	_______),
+};

keyboards/e6v2/le/info.json

@@ -8,9 +8,12 @@
         "LAYOUT": {
             "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"x":0, "y":3}, {"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.75}, {"label":"Ctrl", "x":1.75, "y":4, "w":1.25}, {"label":"Win", "x":3, "y":4, "w":1.25}, {"label":"Alt", "x":4.25, "y":4, "w":1.25}, {"x":5.5, "y":4, "w":2.75}, {"x":8.25, "y":4, "w":1.75}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}]
         },
-
         "LAYOUT_60_ansi": {
             "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}]
+        },
+        "LAYOUT_60_hhkb": {
+            "key_count": 60,
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"label":"\\", "x":13, "y":0}, {"label":"`", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"/", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}]
         }
     }
-}
+}

keyboards/e6v2/le/keymaps/johu/keymap.c

@@ -0,0 +1,98 @@
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FL 1
+#define _SL 2
+#define _CL 3
+
+// Tap dance defines
+#define CTL_ESC     CTL_T(KC_ESC)               // Tap for Esc, hold for Ctrl
+#define HPR_TAB     ALL_T(KC_TAB)               // Tap for Tab, hold for Hyper (Super+Ctrl+Shift+Alt)
+#define SFT_ENT     SFT_T(KC_ENT)               // Tap for Enter, hold for Shift
+#define KC_SPFN     LT(_SL, KC_SPC)             // Tap for space, hold for function layer (aka SpaceFN)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Layer 0: Base layer (Default layer)
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  \  |  `  |
+ * |-----------------------------------------------------------------------------------------+
+ * |Tab/Hyper|  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |  Bksp |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl/Esc  |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter  |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | Shift/Ent | FN  |
+ * |-----------------------------------------------------------------------------------------+
+ *           |LGUI | LAlt  |               Space                   | RAlt   |RGUI |
+ *           `--------------------------------------------------------------------'
+ */
+  [_BL] = LAYOUT_60_hhkb(
+      KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+      HPR_TAB, KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC,
+      CTL_ESC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+      KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          SFT_ENT, MO(_FL),
+               KC_LGUI, KC_LALT,                       KC_SPFN,                        KC_RALT, KC_RGUI
+      ),
+
+/* Layer 1: FN Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * |  CL | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
+ * |-----------------------------------------------------------------------------------------+
+ * |        |     |     |     |     |     |     |     | Psc | Slck| Paus| Up  |     | Del    |
+ * |-----------------------------------------------------------------------------------------+
+ * |         | Vol-| Vol+| Mute|     |     | *   | /   | Home| PgUp| Left|Right|             |
+ * |-----------------------------------------------------------------------------------------+
+ * |           | Prev| Play| Next|     |     | +   | -   | End  |PgDn| Down|           |     |
+ * |-----------------------------------------------------------------------------------------+
+ *           |       |       |                                    | Stop  |  CL   |
+ *           `--------------------------------------------------------------------'
+ */
+  [_FL] = LAYOUT_60_hhkb(
+      TG(_CL),  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
+       _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   _______, KC_DEL,
+       _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______,
+       _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN, KC_DOWN,          _______, _______,
+                _______, _______,                       _______,                        KC_MSTP, MO(_CL)
+      ),
+
+/* Layer 2: Space FN Layer
+* ,-----------------------------------------------------------------------------------------.
+* |  CL | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
+* |-----------------------------------------------------------------------------------------+
+* |        |     |     |     |     |     |     | PgUp|     | PgDn|     |     |     | Del    |
+* |-----------------------------------------------------------------------------------------+
+* |         | Vol-| Vol+| Mute|     |     | Left| Down| Up  |Right|     |     |             |
+* |-----------------------------------------------------------------------------------------+
+* |           | Prev| Play| Next|     |     | Home| End |     |     |     |           |     |
+* |-----------------------------------------------------------------------------------------+
+*            |       |       |                                    |       |  CL   |
+*            `--------------------------------------------------------------------'
+*/
+  [_SL] = LAYOUT_60_hhkb(
+      TG(_CL), KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_INS,  KC_DEL,
+      _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, KC_PGDN, _______, _______, _______, KC_DEL,
+      _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______, _______,
+      _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_END,  _______, _______, _______,          _______, _______,
+               _______, _______,                        _______,                       _______, MO(_CL)
+      ),
+
+/* Layer 3: Control Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * |     |     |     |     |     |     |     |     |     |     |     |     |     |     |     |
+ * |-----------------------------------------------------------------------------------------+
+ * |        | BL- | BL+ | BL  |     |     |     |     |     |     |     |     |     | RESET  |
+ * |-----------------------------------------------------------------------------------------+
+ * |         | RGBT| RGBM|     |     |     |     |     |     |     |     |     |             |
+ * |-----------------------------------------------------------------------------------------+
+ * |  CAPS     | Hue+| Hue-| Sat+| Sat-| Val+| Val-|     |      |    |     |           |     |
+ * |-----------------------------------------------------------------------------------------+
+ *           |       |       |                                     |       |      |
+ *           `--------------------------------------------------------------------'
+ */
+  [_CL] = LAYOUT_60_hhkb(
+      _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______, _______, _______,
+      _______, BL_TOGG, BL_STEP, BL_DEC,  BL_INC,  _______, _______, _______, _______, _______,  _______, _______, _______, RESET,
+      _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______,  _______, _______, _______,
+      KC_CAPS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______,  _______,          _______, _______,
+               _______, _______,                        _______,                       _______,  _______
+      )
+};

keyboards/e6v2/le/keymaps/johu/readme.md

@@ -0,0 +1,40 @@
+# johu's E6-V2 Last Edition (LE) HHKB
+Make example for this keyboard (after setting up your build environment):
+```bash
+$ make e6v2/le:johu
+```
+
+Or to make and flash:
+```bash
+$ make e6v2/le:johu:dfu
+```
+
+See the [build environment setup] and the [make instructions] for more
+information. Brand new to QMK? Start with our [Complete Newbs Guide].
+
+## Layer 0: Base Layer
+* HHKB Qwerty layout plus some specials:
+  * The Space key sends `Space` when tapped, toggles to *Space FN Layer* when held
+  * [Grave Escape]
+  * The Ctrl key sends `Esc` when tapped, `Ctrl` when held
+  * The Tab key sends `Tab` when tapped, [Hyper] (`Super+Ctrl+Alt+Shift`) when held
+  * The right Shift key sends `Enter` when tapped, `Shift` when held
+
+## Layer 1: Function Layer
+* Default HHKB function layer includig the iconic diamond arrow cluster
+* Multimedia controls
+
+## Layer 2: Space FN Layer
+* VIM style arrow cluster
+* Multimedia controls
+
+## Layer 3: Control Layer
+* Reset button
+* RGB controls
+* Caps Lock
+
+[build environment setup]: https://docs.qmk.fm/#/getting_started_build_tools
+[make instructions]: https://docs.qmk.fm/#/getting_started_make_guide
+[Complete Newbs Guide]: https://docs.qmk.fm/#/newbs
+[Grave Escape]: https://beta.docs.qmk.fm/features/feature_grave_esc
+[Hyper]: http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key

keyboards/e6v2/le/le.h

@@ -33,4 +33,32 @@
   { K40, KC_NO, K42, K43, KC_NO, KC_NO, KC_NO, K47, KC_NO, KC_NO, K4A, K4B, KC_NO, K4D, K4E   }, \
 }
 
+/* LAYOUT_60_hhkb
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
+ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0e │0d │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤
+ * │10   │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e   │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤
+ * │20    │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d      │
+ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤
+ * │30      │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c    │3e │
+ * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴──────┬┴───┴┬───┬─┴───┤
+ * │▓▓▓▓▓│42 │43   │47 (7u)                    │4b   │4d │▓▓▓▓▓│
+ * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘
+*/
+#define LAYOUT_60_hhkb( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K0D, \
+    K10,      K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
+    K20,      K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C,      K3E, \
+              K42, K43,                K47,                K4B,      K4D       \
+)\
+{\
+  { K00,   K01,   K02, K03, K04,   K05,   K06,   K07, K08,   K09,   K0A,   K0B, K0C,   K0D,   K0E   }, \
+  { K10,   KC_NO, K12, K13, K14,   K15,   K16,   K17, K18,   K19,   K1A,   K1B, K1C,   K1D,   K1E   }, \
+  { K20,   KC_NO, K22, K23, K24,   K25,   K26,   K27, K28,   K29,   K2A,   K2B, K2C,   K2D,   KC_NO }, \
+  { K30,   KC_NO, K32, K33, K34,   K35,   K36,   K37, K38,   K39,   K3A,   K3B, K3C,   KC_NO, K3E   }, \
+  { KC_NO, KC_NO, K42, K43, KC_NO, KC_NO, KC_NO, K47, KC_NO, KC_NO, KC_NO, K4B, KC_NO, K4D,   KC_NO }, \
+}
+
 #endif

keyboards/e6v2/readme.md

@@ -17,4 +17,4 @@ The E6V2 has been available with either a bootmapper client or QMK powered PCB.
 
 Please use the appropriate version when making your firmware. Flashing one in place of the other, can brick your PCB. Please be certain whether you have a OE or LE  PCB. 
 
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/ergodox_ez/keymaps/skug/config.h

@@ -1,5 +1,7 @@
 #pragma once
 
+#define FORCE_NKRO
+
 #undef LSPO_KEY
 #undef RSPC_KEY
 #define LSPO_KEY KC_8 // Nordic Left SpaceCadet

keyboards/ergodox_ez/keymaps/skug/keymap.c

@@ -22,8 +22,6 @@
 #include "version.h"
 #include "keymap_swedish.h"
 
-#define _______ KC_TRNS
-
 #define BASE 0 // default layer
 #define SYMB 1 // symbols
 #define MDIA 2 // media keys
@@ -47,8 +45,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
  * |--------+------+------+------+------+------|      |           |      |------+------+------+------+------+--------|
  * |   L4   |   A  |   S  |   D  |   F  |   G  |------|           |------|   H  |   J  |   K  |   L  |Ö / L3|   Ä/L2 |
- * |        |      |      |      |      |      | Hypr/|           | Meh/ |      |      |      |      |      |        |
- * |--------+------+------+------+------+------| Esc  |           | Ent  |------+------+------+------+------+--------|
+ * |        |      |      |      |      |      |      |           |      |      |      |      |      |      |        |
+ * |--------+------+------+------+------+------| Back |           |Forwd |------+------+------+------+------+--------|
  * | LShift/|  Z   |   X  |   C  |   V  |   B  |      |           |      |   N  |   M  |   ;  |   :  |  _   | RShift/|
  * |    (   |      |      |      |      |      |      |           |      |      |      |   ,  |   .  |  -   |   )    |
  * `--------+------+------+------+------+-------------'           `-------------+------+------+------+------+--------'
@@ -71,8 +69,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     NO_HALF,          KC_1,           KC_2,          KC_3,    KC_4,    KC_5,   KC_INS,
     KC_TAB,           KC_Q,           KC_W,          KC_E,    KC_R,    KC_T,   TG(SYMB),
     MO(ARRW),         KC_A,           KC_S,          KC_D,    KC_F,    KC_G,
-    KC_LSPO,          CTL_T(KC_Z),    KC_X,          KC_C,    KC_V,    KC_B,   ALL_T(KC_ESC),
-    CTL_T(NO_APOS),   NO_ACUT,        KC_LALT, KC_BSPC, KC_SPC,
+    KC_LSPO,          CTL_T(KC_Z),    KC_X,          KC_C,    KC_V,    KC_B,   KC_WBAK,
+    CTL_T(NO_APOS),   NO_ACUT,        KC_LALT,       KC_BSPC, KC_SPC,
                                                                              NO_LESS,   KC_END,
                                                               KC_LEFT,      KC_RIGHT,  KC_PGDN,
                                                         CTL_T(KC_ENT), ALT_T(KC_ESC),  KC_LGUI,
@@ -81,7 +79,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
          TO(ARRW),       KC_6,   KC_7,   KC_8,    KC_9,    KC_0,              NO_PLUS,
          TG(SYMB),       KC_Y,   KC_U,   KC_I,    KC_O,    KC_P,              NO_AA,
                          KC_H,   KC_J,   KC_K,    KC_L,    LT(MDIA, NO_OSLH), LT(SYMB, NO_AE),
-         MEH_T(KC_ENT),  KC_N,   KC_M,   KC_COMM, KC_DOT,  NO_MINS,           KC_RSPC,
+         KC_WFWD,        KC_N,   KC_M,   KC_COMM, KC_DOT,  NO_MINS,           KC_RSPC,
                                  KC_SPC, KC_BSPC, NO_ALGR, NO_ASTR,           CTL_T(NO_TILD),
         KC_HOME,  NO_CIRC,
         KC_PGUP,  KC_UP,         KC_DOWN,
@@ -101,11 +99,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *   |      |      |      |      |      |                                       |      |    . |   0  |   =  |      |
  *   `----------------------------------'                                       `----------------------------------'
  *                                        ,-------------.       ,-------------.
- *                                        |Animat|      |       |Toggle|Solid |
+ *                                        |      |      |       |      |      |
  *                                 ,------|------|------|       |------+------+------.
  *                                 |      |      |      |       |      |      |      |
  *                                 |------|------|------|       |------|------|------|
- *                                 |BNess-|Bness+|      |       |      |Hue-  |Hue+  |
+ *                                 |      |      |      |       |      |      |      |
  *                                 `--------------------'       `--------------------'
  */
 // SYMBOLS
@@ -116,18 +114,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        _______,KC_HASH,NO_DLR, NO_LPRN,NO_RPRN,NO_GRV,
        _______,KC_PERC,NO_CIRC,NO_LBRC,NO_RBRC,NO_TILD,_______,
           EPRM,_______,_______,_______,_______,
-                                       RGB_MOD,_______,
+                                       _______,_______,
+                               _______,_______,_______,
                                _______,_______,_______,
-                               RGB_VAD,RGB_VAI,_______,
        // right hand
        _______, KC_F6,   KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,
        _______, KC_UP,   KC_7,   KC_8,    KC_9,    NO_ASTR, KC_F12,
                 KC_DOWN, KC_4,   KC_5,    KC_6,    NO_PLUS, _______,
        _______, NO_AMPR, KC_1,   KC_2,    KC_3,    NO_MINS, _______,
                          _______,KC_DOT,  KC_0,    NO_EQL,  _______,
-       RGB_TOG, RGB_SLD,
+       _______, _______,
        _______, _______, _______,
-       _______, RGB_HUD, RGB_HUI
+       _______, _______, _______
 ),
 
 /* Keymap: Media and mouse keys
@@ -183,10 +181,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                    _______, _______, _______,
      // right hand
         TO(BASE),  _______, _______, _______, _______, _______, _______,
-        _______,   _______, KC_BTN4, KC_MS_U, KC_BTN5, _______, _______,
-                   _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______,
         _______,   _______, _______, _______, _______, _______, _______,
-                            KC_BTN1, KC_BTN3, KC_BTN2, _______, _______,
+                   _______, _______, _______, _______, _______, _______,
+        _______,   _______, _______, _______, _______, _______, _______,
+                            _______, _______, _______, _______, _______,
         _______, _______,
         _______, _______, _______,
         _______, _______, _______

keyboards/ergodox_infinity/keymaps/input_club/keymap.c

@@ -93,7 +93,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *                                  |     |     |     |
  *                                  +-----+-----+-----+
  */
-       KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_TRNS,
+       KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F11,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
@@ -120,7 +120,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  *    |     |     |     |
  *    +-----+-----+-----+
  */
-       KC_TRNS, KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_TRNS,
+       KC_F12,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,

keyboards/ergotravel/config.h

@@ -15,76 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef REV1_CONFIG_H
-#define REV1_CONFIG_H
+#pragma once
 
-#include QMK_KEYBOARD_CONFIG_H
+#include "config_common.h"
 
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xCEEB
-#define PRODUCT_ID      0x1256
-#define DEVICE_VER      0x0100
-#define MANUFACTURER    JPConstantineau.com
-#define PRODUCT         ErgoTravel Keyboard
-#define DESCRIPTION     Split 45 percent ergonomic keyboard
-
-/* key matrix size */
-// Rows are doubled-up
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 7
-
-// wiring of each half
-#define MATRIX_ROW_PINS { C6, D7, E6, B4 }
-#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-// #define BACKLIGHT_LEVELS 3
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-#define BACKLIGHT_PIN B5
-#define BACKLIGHT_LEVELS 5
-
-/* ws2812 RGB LED */
-#define RGB_DI_PIN D3
-#define RGBLIGHT_TIMER
-#define RGBLED_NUM 12    // Number of LEDs
-#define ws2812_PORTREG  PORTD
-#define ws2812_DDRREG   DDRD
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-// #define NO_DEBUG
-
-/* disable print */
-// #define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif

keyboards/ergotravel/ergotravel.h

@@ -1,5 +1,4 @@
-#ifndef ERGOTRAVEL_H
-#define ERGOTRAVEL_H
+#pragma once
 
 #ifdef KEYBOARD_ergotravel_rev1
     #include "rev1.h"
@@ -21,4 +20,3 @@
         KC_##L30, KC_##L31, KC_##L32, KC_##L33,           KC_##L34, KC_##L35,       KC_##R30, KC_##R31,           KC_##R32, KC_##R33, KC_##R34, KC_##R35  \
     )
 
-#endif

keyboards/ergotravel/i2c.c

@@ -1,162 +0,0 @@
-#include <util/twi.h>
-#include <avr/io.h>
-#include <stdlib.h>
-#include <avr/interrupt.h>
-#include <util/twi.h>
-#include <stdbool.h>
-#include "i2c.h"
-
-#ifdef USE_I2C
-
-// Limits the amount of we wait for any one i2c transaction.
-// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
-// 9 bits, a single transaction will take around 90μs to complete.
-//
-// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
-// poll loop takes at least 8 clock cycles to execute
-#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
-
-#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
-
-volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-static volatile uint8_t slave_buffer_pos;
-static volatile bool slave_has_register_set = false;
-
-// Wait for an i2c operation to finish
-inline static
-void i2c_delay(void) {
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-
-  // easier way, but will wait slightly longer
-  // _delay_us(100);
-}
-
-// Setup twi to run at 100kHz
-void i2c_master_init(void) {
-  // no prescaler
-  TWSR = 0;
-  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
-  // Check datasheets for more info.
-  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
-}
-
-// Start a transaction with the given i2c slave address. The direction of the
-// transfer is set with I2C_READ and I2C_WRITE.
-// returns: 0 => success
-//          1 => error
-uint8_t i2c_master_start(uint8_t address) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
-
-  i2c_delay();
-
-  // check that we started successfully
-  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
-    return 1;
-
-  TWDR = address;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
-    return 1; // slave did not acknowledge
-  else
-    return 0; // success
-}
-
-
-// Finish the i2c transaction.
-void i2c_master_stop(void) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-
-  uint16_t lim = 0;
-  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
-    lim++;
-}
-
-// Write one byte to the i2c slave.
-// returns 0 => slave ACK
-//         1 => slave NACK
-uint8_t i2c_master_write(uint8_t data) {
-  TWDR = data;
-  TWCR = (1<<TWINT) | (1<<TWEN);
-
-  i2c_delay();
-
-  // check if the slave acknowledged us
-  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
-}
-
-// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
-// if ack=0 the acknowledge bit is not set.
-// returns: byte read from i2c device
-uint8_t i2c_master_read(int ack) {
-  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
-
-  i2c_delay();
-  return TWDR;
-}
-
-void i2c_reset_state(void) {
-  TWCR = 0;
-}
-
-void i2c_slave_init(uint8_t address) {
-  TWAR = address << 0; // slave i2c address
-  // TWEN  - twi enable
-  // TWEA  - enable address acknowledgement
-  // TWINT - twi interrupt flag
-  // TWIE  - enable the twi interrupt
-  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
-}
-
-ISR(TWI_vect);
-
-ISR(TWI_vect) {
-  uint8_t ack = 1;
-  switch(TW_STATUS) {
-    case TW_SR_SLA_ACK:
-      // this device has been addressed as a slave receiver
-      slave_has_register_set = false;
-      break;
-
-    case TW_SR_DATA_ACK:
-      // this device has received data as a slave receiver
-      // The first byte that we receive in this transaction sets the location
-      // of the read/write location of the slaves memory that it exposes over
-      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
-      // slave_buffer_pos after each write.
-      if(!slave_has_register_set) {
-        slave_buffer_pos = TWDR;
-        // don't acknowledge the master if this memory loctaion is out of bounds
-        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
-          ack = 0;
-          slave_buffer_pos = 0;
-        }
-        slave_has_register_set = true;
-      } else {
-        i2c_slave_buffer[slave_buffer_pos] = TWDR;
-        BUFFER_POS_INC();
-      }
-      break;
-
-    case TW_ST_SLA_ACK:
-    case TW_ST_DATA_ACK:
-      // master has addressed this device as a slave transmitter and is
-      // requesting data.
-      TWDR = i2c_slave_buffer[slave_buffer_pos];
-      BUFFER_POS_INC();
-      break;
-
-    case TW_BUS_ERROR: // something went wrong, reset twi state
-      TWCR = 0;
-    default:
-      break;
-  }
-  // Reset everything, so we are ready for the next TWI interrupt
-  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
-}
-#endif

keyboards/ergotravel/i2c.h

@@ -1,49 +0,0 @@
-#ifndef I2C_H
-#define I2C_H
-
-#include <stdint.h>
-
-#ifndef F_CPU
-#define F_CPU 16000000UL
-#endif
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-#define I2C_ACK 1
-#define I2C_NACK 0
-
-#define SLAVE_BUFFER_SIZE 0x10
-
-// i2c SCL clock frequency
-#define SCL_CLOCK  100000L
-
-extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-void i2c_master_init(void);
-uint8_t i2c_master_start(uint8_t address);
-void i2c_master_stop(void);
-uint8_t i2c_master_write(uint8_t data);
-uint8_t i2c_master_read(int);
-void i2c_reset_state(void);
-void i2c_slave_init(uint8_t address);
-
-
-static inline unsigned char i2c_start_read(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_READ);
-}
-
-static inline unsigned char i2c_start_write(unsigned char addr) {
-  return i2c_master_start((addr << 1) | I2C_WRITE);
-}
-
-// from SSD1306 scrips
-extern unsigned char i2c_rep_start(unsigned char addr);
-extern void i2c_start_wait(unsigned char addr);
-extern unsigned char i2c_readAck(void);
-extern unsigned char i2c_readNak(void);
-extern unsigned char i2c_read(unsigned char ack);
-
-#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
-
-#endif

keyboards/ergotravel/keymaps/ckofy/config.h

@@ -15,10 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
+#pragma once
 
 /* Use I2C or Serial, not both */
 
@@ -40,4 +37,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
 
-#endif

keyboards/ergotravel/keymaps/ckofy/keymap.c

@@ -1,4 +1,4 @@
-#include QMK_KEYBOARD_H
+#include QMK_KEYBOARD_H
 
 extern keymap_config_t keymap_config;
 
@@ -100,7 +100,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
            ,    ,    ,    ,    ,    ,    ,          ,COMM, P1 , P2 , P3 ,PLUS,    ,
     //|----+----+----+----+----+----+----.     .----+----+----+----+----+----+----|
-           ,    ,    ,    ,    ,    ,                    , P0 ,NLCK,    ,    ,    
+           ,    ,    ,    ,    ,    ,                    , P0 ,NLCK,    ,    ,
     //`----+----+----+--+-+----/----/               \----\----+----+----+----+----'
   ),
 
@@ -112,7 +112,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
          ,UDO ,CUT ,CPY ,PST ,XXXX,    ,          ,XXXX,XXXX,COMM,DOT ,SLSH,    ,
   //|----+----+----+----+----+----+----.     .----+----+----+----+----+----+----|
-         ,    ,    ,    ,    ,    ,                    ,    ,    ,    ,    ,    
+         ,    ,    ,    ,    ,    ,                    ,    ,    ,    ,    ,
   //`----+----+----+--+-+----/----/               \----\----+----+----+----+----'
   ),
 
@@ -124,7 +124,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     //|----+----+----+----+----+----+----|     |----+----+----+----+----+----+----|
            , GRV,TILD,XXXX,EQL ,PLUS,    ,          ,UNDS,MINS,COMM,DOT ,SLSH,ENT ,
     //|----+----+----+----+----+----+----.     .----+----+----+----+----+----+----|
-           ,    ,    ,    ,    ,    ,                    ,    ,    ,    ,    ,    
+           ,    ,    ,    ,    ,    ,                    ,    ,    ,    ,    ,
     //`----+----+----+--+-+----/----/               \----\----+----+----+----+----'
   ),
 
@@ -139,7 +139,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     //|----+----+----+----+----+----+----.     .----+----+----+----+----+----+----|
            ,    ,    ,    ,    ,    ,                    ,    ,    ,VOLD,VOLU,MUTE
     //`----+----+----+--+-+----/----/               \----\----+----+----+----+----'
-  ) 
+  )
 
 };
 
@@ -148,9 +148,9 @@ const uint16_t PROGMEM fn_actions[] = {
   ,[F_ALT]  = ACTION_MODS_ONESHOT (MOD_LALT)
   ,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL)
   ,[F_NUMPAD] = ACTION_LAYER_TAP_TOGGLE(_NUMPAD)
-// ,[F_LOWER] = ACTION_LAYER_TAP_TOGGLE(LOWER)                // FN1 - Momentary Layer 1 (Lower)    
+// ,[F_LOWER] = ACTION_LAYER_TAP_TOGGLE(LOWER)                // FN1 - Momentary Layer 1 (Lower)
 // ,[F_RAISE] = ACTION_LAYER_TAP_TOGGLE(RAISE)                // FN2 - Momentary Layer 2 (Raise)
-};   
+};
 
 
 

keyboards/ergotravel/keymaps/ckofy/rules.mk

@@ -1,3 +0,0 @@
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/ergotravel/keymaps/default/config.h

@@ -15,10 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
+#pragma once
 
 /* Use I2C or Serial, not both */
 
@@ -38,4 +35,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
 
-#endif
+

keyboards/ergotravel/keymaps/default/rules.mk

@@ -1,3 +0,0 @@
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/ergotravel/keymaps/ian/config.h

@@ -15,10 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
+#pragma once
 
 /* Use I2C or Serial, not both */
 
@@ -38,4 +35,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
 
-#endif
+

keyboards/ergotravel/keymaps/ian/rules.mk

@@ -1,3 +0,0 @@
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/ergotravel/keymaps/jpconstantineau/config.h

@@ -15,10 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
+#pragma once
 
 /* Use I2C or Serial, not both */
 
@@ -38,4 +35,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
 
-#endif
+

keyboards/ergotravel/keymaps/jpconstantineau/rules.mk

@@ -1,3 +0,0 @@
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/ergotravel/keymaps/viet/config.h

@@ -15,10 +15,7 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "config_common.h"
+#pragma once
 
 /* Use I2C or Serial, not both */
 
@@ -39,4 +36,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_VAL_STEP 20
 #define RGBLIGHT_LIMIT_VAL 220
 
-#endif

keyboards/ergotravel/keymaps/viet/rules.mk

@@ -2,6 +2,3 @@ RGBLIGHT_ENABLE = yes
 BACKLIGHT_ENABLE = no
 UNICODE_ENABLE = yes
 
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/ergotravel/matrix.c

@@ -1,482 +0,0 @@
-/*
-Copyright 2018 Pierre Constantineau
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "pro_micro.h"
-#include "config.h"
-#include "timer.h"
-#include "backlight.h"
-
-#ifdef USE_I2C
-#  include "i2c.h"
-#else // USE_SERIAL
-#  include "serial.h"
-#endif
-
-#ifndef DEBOUNCING_DELAY
-#   define DEBOUNCING_DELAY 5
-#endif
-
-#if (DEBOUNCING_DELAY > 0)
-    static uint16_t debouncing_time;
-    static bool debouncing = false;
-#endif
-
-#if (MATRIX_COLS <= 8)
-#    define print_matrix_header()  print("\nr/c 01234567\n")
-#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
-#    define matrix_bitpop(i)       bitpop(matrix[i])
-#    define ROW_SHIFTER ((uint8_t)1)
-#else
-#    error "Currently only supports 8 COLS"
-#endif
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-#define ERROR_DISCONNECT_COUNT 5
-
-#define SERIAL_LED_ADDR 0x00
-
-#define ROWS_PER_HAND (MATRIX_ROWS/2)
-
-static uint8_t error_count = 0;
-
-static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-#if (DIODE_DIRECTION == COL2ROW)
-    static void init_cols(void);
-    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
-    static void unselect_rows(void);
-    static void select_row(uint8_t row);
-    static void unselect_row(uint8_t row);
-#elif (DIODE_DIRECTION == ROW2COL)
-    static void init_rows(void);
-    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
-    static void unselect_cols(void);
-    static void unselect_col(uint8_t col);
-    static void select_col(uint8_t col);
-#endif
-
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
-    matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-    debug_enable = true;
-    debug_matrix = true;
-    debug_mouse = true;
-    // initialize row and col
-    unselect_rows();
-    init_cols();
-
-    TX_RX_LED_INIT;
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-
-    matrix_init_quantum();
-
-}
-
-uint8_t _matrix_scan(void)
-{
-    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-#if (DIODE_DIRECTION == COL2ROW)
-    // Set row, read cols
-    for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
-#       if (DEBOUNCING_DELAY > 0)
-            bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
-
-            if (matrix_changed) {
-                debouncing = true;
-                debouncing_time = timer_read();
-                PORTD ^= (1 << 2);
-            }
-
-#       else
-            read_cols_on_row(matrix+offset, current_row);
-#       endif
-
-    }
-
-#elif (DIODE_DIRECTION == ROW2COL)
-    // Set col, read rows
-    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
-#       if (DEBOUNCING_DELAY > 0)
-            bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
-            if (matrix_changed) {
-                debouncing = true;
-                debouncing_time = timer_read();
-            }
-#       else
-             read_rows_on_col(matrix+offset, current_col);
-#       endif
-
-    }
-#endif
-
-#   if (DEBOUNCING_DELAY > 0)
-        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
-            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
-                matrix[i+offset] = matrix_debouncing[i+offset];
-            }
-            debouncing = false;
-        }
-#   endif
-
-    return 1;
-}
-
-#ifdef USE_I2C
-
-// Get rows from other half over i2c
-int i2c_transaction(void) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
-    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
-    if (err) goto i2c_error;
-
-    // start of matrix stored at 0x00
-    err = i2c_master_write(0x00);
-    if (err) goto i2c_error;
-
-#ifdef BACKLIGHT_ENABLE
-    // Write backlight level for slave to read
-    err = i2c_master_write(get_backlight_level());
-#else
-    // Write zero, so our byte index is the same
-    err = i2c_master_write(0x00);
-#endif
-    if (err) goto i2c_error;
-
-    // Start read
-    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
-    if (err) goto i2c_error;
-
-    if (!err) {
-        int i;
-        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
-            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
-        }
-        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
-        i2c_master_stop();
-    } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
-        i2c_reset_state();
-        return err;
-    }
-
-    return 0;
-}
-
-#else // USE_SERIAL
-
-int serial_transaction(void) {
-    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
-    if (serial_update_buffers()) {
-        return 1;
-    }
-
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        matrix[slaveOffset+i] = serial_slave_buffer[i];
-    }
-
-#ifdef BACKLIGHT_ENABLE
-    // Write backlight level for slave to read
-    serial_master_buffer[SERIAL_LED_ADDR] = get_backlight_level();
-#endif
-    return 0;
-}
-#endif
-
-uint8_t matrix_scan(void)
-{
-    uint8_t ret = _matrix_scan();
-
-#ifdef USE_I2C
-    if( i2c_transaction() ) {
-#else // USE_SERIAL
-    if( serial_transaction() ) {
-#endif
-        // turn on the indicator led when halves are disconnected
-        TXLED1;
-
-        error_count++;
-
-        if (error_count > ERROR_DISCONNECT_COUNT) {
-            // reset other half if disconnected
-            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-            for (int i = 0; i < ROWS_PER_HAND; ++i) {
-                matrix[slaveOffset+i] = 0;
-            }
-        }
-    } else {
-        // turn off the indicator led on no error
-        TXLED0;
-        error_count = 0;
-    }
-    matrix_scan_quantum();
-    return ret;
-}
-
-void matrix_slave_scan(void) {
-    _matrix_scan();
-
-    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
-#ifdef USE_I2C
-#ifdef BACKLIGHT_ENABLE
-    // Read backlight level sent from master and update level on slave
-    backlight_set(i2c_slave_buffer[0]);
-#endif
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        i2c_slave_buffer[i+1] = matrix[offset+i];
-    }
-#else // USE_SERIAL
-    for (int i = 0; i < ROWS_PER_HAND; ++i) {
-        serial_slave_buffer[i] = matrix[offset+i];
-    }
-
-#ifdef BACKLIGHT_ENABLE
-    // Read backlight level sent from master and update level on slave
-    backlight_set(serial_master_buffer[SERIAL_LED_ADDR]);
-#endif
-#endif
-}
-
-bool matrix_is_modified(void)
-{
-    if (debouncing) return false;
-    return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop16(matrix[i]);
-    }
-    return count;
-}
-
-#if (DIODE_DIRECTION == COL2ROW)
-
-static void init_cols(void)
-{
-    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
-        uint8_t pin = col_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
-{
-    // Store last value of row prior to reading
-    matrix_row_t last_row_value = current_matrix[current_row];
-
-    // Clear data in matrix row
-    current_matrix[current_row] = 0;
-
-    // Select row and wait for row selecton to stabilize
-    select_row(current_row);
-    wait_us(30);
-
-    // For each col...
-    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
-
-        // Select the col pin to read (active low)
-        uint8_t pin = col_pins[col_index];
-        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
-
-        // Populate the matrix row with the state of the col pin
-        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
-    }
-
-    // Unselect row
-    unselect_row(current_row);
-
-    return (last_row_value != current_matrix[current_row]);
-}
-
-static void select_row(uint8_t row)
-{
-    uint8_t pin = row_pins[row];
-    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
-    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
-}
-
-static void unselect_row(uint8_t row)
-{
-    uint8_t pin = row_pins[row];
-    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-}
-
-static void unselect_rows(void)
-{
-    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
-        uint8_t pin = row_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-#elif (DIODE_DIRECTION == ROW2COL)
-
-static void init_rows(void)
-{
-    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
-        uint8_t pin = row_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
-{
-    bool matrix_changed = false;
-
-    // Select col and wait for col selecton to stabilize
-    select_col(current_col);
-    wait_us(30);
-
-    // For each row...
-    for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
-    {
-
-        // Store last value of row prior to reading
-        matrix_row_t last_row_value = current_matrix[row_index];
-
-        // Check row pin state
-        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
-        {
-            // Pin LO, set col bit
-            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
-        }
-        else
-        {
-            // Pin HI, clear col bit
-            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
-        }
-
-        // Determine if the matrix changed state
-        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
-        {
-            matrix_changed = true;
-        }
-    }
-
-    // Unselect col
-    unselect_col(current_col);
-
-    return matrix_changed;
-}
-
-static void select_col(uint8_t col)
-{
-    uint8_t pin = col_pins[col];
-    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
-    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
-}
-
-static void unselect_col(uint8_t col)
-{
-    uint8_t pin = col_pins[col];
-    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-}
-
-static void unselect_cols(void)
-{
-    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
-        uint8_t pin = col_pins[x];
-        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
-        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
-    }
-}
-
-#endif