CLI: Fix MCU lists for qmk info (#10574)

* Move existing files out the way

* Convert to community layouts

* Add smk65/revf support

* Disable stuff by default

* Update IDs for via

* Align LAYOUT macros for community layouts

* Align LAYOUT macros for community layouts - Fix configurator ordering

* Update via keymap

* remove stub _kb function

* Apply suggestions from code review

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>

docs/cli_commands.md

@@ -167,6 +167,17 @@ Creates a keymap.c from a QMK Configurator export.
 qmk json2c [-o OUTPUT] filename
 ```
 
+## `qmk c2json`
+
+Creates a keymap.json from a keymap.c.  
+**Note:** Parsing C source files is not easy, therefore this subcommand may not work your keymap. In some cases not using the C pre-processor helps.
+
+**Usage**:
+
+```
+qmk c2json [--no-cpp] [-o OUTPUT] filename
+```
+
 ## `qmk list-keyboards`
 
 This command lists all the keyboards currently defined in `qmk_firmware`

docs/faq_build.md

@@ -13,65 +13,93 @@ An example of using `sudo`, when your controller is ATMega32u4:
 
 or just:
 
-    $ sudo make <keyboard>:<keymap>:dfu
+    $ sudo make <keyboard>:<keymap>:flash
 
 Note that running `make` with `sudo` is generally ***not*** a good idea, and you should use one of the former methods, if possible.
 
 ### Linux `udev` Rules
-On Linux, you'll need proper privileges to access the MCU. You can either use
-`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`. Once added run the following:
-```console
+
+On Linux, you'll need proper privileges to communicate with the bootloader device. You can either use `sudo` when flashing firmware, or place this file in `/etc/udev/rules.d/`:
+
+**/etc/udev/rules.d/50-qmk.rules:**
+```
+# Atmel DFU
+### ATmega16U2
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FEF", TAG+="uaccess", RUN{builtin}+="uaccess"
+### ATmega32U2
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF0", TAG+="uaccess", RUN{builtin}+="uaccess"
+### ATmega16U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF3", TAG+="uaccess", RUN{builtin}+="uaccess"
+### ATmega32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF4", TAG+="uaccess", RUN{builtin}+="uaccess"
+### AT90USB64
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF9", TAG+="uaccess", RUN{builtin}+="uaccess"
+### AT90USB128
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FFB", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# Input Club
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1C11", ATTRS{idProduct}=="B007", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# STM32duino
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1EAF", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess"
+# STM32 DFU
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="DF11", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# BootloadHID
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DF", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# USBAspLoader
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DC", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# ModemManager should ignore the following devices
+# Atmel SAM-BA (Massdrop)
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="6124", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+
+# Caterina (Pro Micro)
+## Spark Fun Electronics
+### Pro Micro 3V3/8MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### Pro Micro 5V/16MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### LilyPad 3V3/8MHz (and some Pro Micro clones)
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9207", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## Pololu Electronics
+### A-Star 32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1FFB", ATTRS{idProduct}=="0101", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## Arduino SA
+### Leonardo
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### Micro
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## Adafruit Industries LLC
+### Feather 32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000C", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### ItsyBitsy 32U4 3V3/8MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000D", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### ItsyBitsy 32U4 5V/16MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000E", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## dog hunter AG
+### Leonardo
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### Micro
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+```
+
+Once added, run the following:
+
+```
 sudo udevadm control --reload-rules
 sudo udevadm trigger
 ```
 
-**/etc/udev/rules.d/50-atmel-dfu.rules:**
-```
-# Atmel ATMega32U4
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", TAG+="uaccess", RUN{builtin}+="uaccess"
-# Atmel USBKEY AT90USB1287
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", TAG+="uaccess", RUN{builtin}+="uaccess"
-# Atmel ATMega32U2
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", TAG+="uaccess", RUN{builtin}+="uaccess"
-```
-
-**/etc/udev/rules.d/54-input-club-keyboard.rules:**
+**Note:** With older versions of ModemManager (< 1.12), filtering only works when not in strict mode. The following commands can update that setting:
 
 ```
-# Input Club keyboard bootloader
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", ATTRS{idProduct}=="b007", TAG+="uaccess", RUN{builtin}+="uaccess"
-```
-
-**/etc/udev/rules.d/55-caterina.rules:**
-```
-# ModemManager should ignore the following devices
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-```
-
-**Note:** With older (before 1.12) ModemManager, filtering only works when not in strict mode, the following commands can update that settings:
-```console
 printf '[Service]\nExecStart=\nExecStart=/usr/sbin/ModemManager --filter-policy=default' | sudo tee /etc/systemd/system/ModemManager.service.d/policy.conf
 sudo systemctl daemon-reload
 sudo systemctl restart ModemManager
 ```
 
-**/etc/udev/rules.d/56-dfu-util.rules:**
-```
-# stm32duino
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess"
-# Generic stm32
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", TAG+="uaccess", RUN{builtin}+="uaccess"
-```
-
-**/etc/udev/rules.d/57-bootloadhid.rules:**
-```
-# bootloadHID
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05df", TAG+="uaccess", RUN{builtin}+="uaccess"
-```
-
 ### Serial device is not detected in bootloader mode on Linux
 Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as
 Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices may require `USB_SERIAL` and any of its sub options.
@@ -96,46 +124,6 @@ You can buy a really unique VID:PID here. I don't think you need this for person
 - http://www.obdev.at/products/vusb/license.html
 - http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1
 
-## BOOTLOADER_SIZE for AVR
-Note that Teensy2.0++ bootloader size is 2048byte. Some Makefiles may have wrong comment.
-
-```
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 2048
-#   Atmel DFU loader 4096       (TMK Alt Controller)
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
-```
-
-## `avr-gcc: internal compiler error: Abort trap: 6 (program cc1)` on MacOS
-
-This is an issue with updating on brew, causing symlinks that avr-gcc depend on getting mangled.
-
-The solution is to remove and reinstall all affected modules.
-
-```
-brew rm avr-gcc avr-gcc@8 dfu-programmer dfu-util gcc-arm-none-eabi arm-gcc-bin@8 avrdude qmk
-brew install qmk/qmk/qmk
-brew link --force avr-gcc@8
-brew link --force arm-gcc-bin@8
-```
-
-### `avr-gcc` and LUFA
-
-If you updated your `avr-gcc` and you see errors involving LUFA, for example:
-
-`lib/lufa/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h:380:5: error: 'const' attribute on function returning 'void'`
-
-For now, you need to rollback `avr-gcc` to 8 in Homebrew.
-
-```
-brew uninstall --force avr-gcc
-brew install avr-gcc@8
-brew link --force avr-gcc@8
-```
-
 ### I just flashed my keyboard and it does nothing/keypresses don't register - it's also ARM (rev6 planck, clueboard 60, hs60v2, etc...) (Feb 2019)
 Due to how EEPROM works on ARM based chips, saved settings may no longer be valid.  This affects the default layers, and *may*, under certain circumstances we are still figuring out, make the keyboard unusable.  Resetting the EEPROM will correct this.
 

docs/faq_debug.md

@@ -31,20 +31,6 @@ Check:
 - try using 'print' function instead of debug print. See **common/print.h**.
 - disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97).
 
-## Linux or UNIX Like System Requires Super User Privilege
-Just use 'sudo' to execute *hid_listen* with privilege.
-```
-$ sudo hid_listen
-```
-
-Or add an *udev rule* for TMK devices with placing a file in rules directory. The directory may vary on each system.
-
-File: /etc/udev/rules.d/52-tmk-keyboard.rules(in case of Ubuntu)
-```
-# tmk keyboard products     https://github.com/tmk/tmk_keyboard
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
-```
-
 ***
 
 # Miscellaneous

docs/feature_advanced_keycodes.md

@@ -2,21 +2,24 @@
 
 These allow you to combine a modifier with a keycode. When pressed, the keydown event for the modifier, then `kc` will be sent. On release, the keyup event for `kc`, then the modifier will be sent.
 
-|Key       |Aliases                        |Description                                         |
-|----------|-------------------------------|----------------------------------------------------|
-|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                    |
-|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                      |
-|`LALT(kc)`|`A(kc)`, `LOPT(kc)`            |Hold Left Alt and press `kc`                        |
-|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
-|`RCTL(kc)`|                               |Hold Right Control and press `kc`                   |
-|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                     |
-|`RALT(kc)`|`ROPT(kc)`, `ALGR(kc)`         |Hold Right Alt and press `kc`                       |
-|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                       |
-|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`              |
-|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`            |
-|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`       |
-|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`     |
-|`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`|
+|Key       |Aliases                        |Description                                           |
+|----------|-------------------------------|------------------------------------------------------|
+|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                      |
+|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                        |
+|`LALT(kc)`|`A(kc)`, `LOPT(kc)`            |Hold Left Alt and press `kc`                          |
+|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                          |
+|`RCTL(kc)`|                               |Hold Right Control and press `kc`                     |
+|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                       |
+|`RALT(kc)`|`ROPT(kc)`, `ALGR(kc)`         |Hold Right Alt and press `kc`                         |
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                         |
+|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`                |
+|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`              |
+|`LSA(kc)` |                               |Hold Left Shift and Left Alt and press `kc`           |
+|`RSA(kc)` |`SAGR(kc)`                     |Hold Right Shift and Right Alt (AltGr) and press `kc` |
+|`RCS(kc)` |                               |Hold Right Control and Right Shift and press `kc`     |
+|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`         |
+|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`       |
+|`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`  |
 
 You can also chain them, for example `LCTL(LALT(KC_DEL))` or `C(A(KC_DEL))` makes a key that sends Control+Alt+Delete with a single keypress.
 

docs/hardware_keyboard_guidelines.md

@@ -192,7 +192,7 @@ When developing your keyboard, keep in mind that all warnings will be treated as
 
 ## Copyright Blurb
 
-If you're adapting your keyboard's setup from another project, but not using the same code, but sure to update the copyright header at the top of the files to show your name, in this format:
+If you're adapting your keyboard's setup from another project, but not using the same code, be sure to update the copyright header at the top of the files to show your name, in this format:
 
     Copyright 2017 Your Name <your@email.com>
 

docs/ja/reference_info_json.md

@@ -36,7 +36,7 @@
 * `height`
    * オプション: キー単位でのレイアウトの高さ
 * `key_count`
-   * **必須**: このレイアウトのキーの数
+   * オプション: このレイアウトのキーの数
 * `layout`
    * 物理レイアウトを説明するキー辞書のリスト。詳細は次のセクションを見てください。
 

docs/mod_tap.md

@@ -27,22 +27,25 @@ This key would activate Left Control and Left Shift when held, and send Escape w
 
 For convenience, QMK includes some Mod-Tap shortcuts to make common combinations more compact in your keymap:
 
-|Key         |Aliases                                                          |Description                                            |
-|------------|-----------------------------------------------------------------|-------------------------------------------------------|
-|`LCTL_T(kc)`|`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped               |
-|`LSFT_T(kc)`|`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                 |
-|`LALT_T(kc)`|`LOPT_T(kc)`, `ALT_T(kc)`, `OPT_T(kc)`                           |Left Alt when held, `kc` when tapped                   |
-|`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                   |
-|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
-|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
-|`RALT_T(kc)`|`ROPT_T(kc)`, `ALGR_T(kc)`                                       |Right Alt when held, `kc` when tapped                  |
-|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                  |
-|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped         |
-|`LCA_T(kc)` |                                                                 |Left Control and Alt when held, `kc` when tapped       |
-|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
-|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
-|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
-|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
+|Key         |Aliases                                                          |Description                                                   |
+|------------|-----------------------------------------------------------------|--------------------------------------------------------------|
+|`LCTL_T(kc)`|`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped                      |
+|`LSFT_T(kc)`|`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                        |
+|`LALT_T(kc)`|`LOPT_T(kc)`, `ALT_T(kc)`, `OPT_T(kc)`                           |Left Alt when held, `kc` when tapped                          |
+|`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                          |
+|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped                     |
+|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                       |
+|`RALT_T(kc)`|`ROPT_T(kc)`, `ALGR_T(kc)`                                       |Right Alt when held, `kc` when tapped                         |
+|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                         |
+|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped                |
+|`LCA_T(kc)` |                                                                 |Left Control and Alt when held, `kc` when tapped              |
+|`LSA_T(kc)` |                                                                 |Left Shift and Alt when held, `kc` when tapped                |
+|`RSA_T(kc)` |`SAGR_T(kc)`                                                     |Right Shift and Right Alt (AltGr) when held, `kc` when tapped |
+|`RCS_T(kc)` |                                                                 |Right Control and Right Shift when held, `kc` when tapped     |
+|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped         |
+|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped        |
+|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped            |
+|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped       |
 |`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|
 
 ## Caveats

docs/reference_info_json.md

@@ -31,7 +31,7 @@ Within our `info.json` file the `layouts` portion of the dictionary contains sev
 * `height`
   * Optional: The height of the layout in Key Units
 * `key_count`
-  * **Required**: The number of keys in this layout
+  * Optional: The number of keys in this layout
 * `layout`
   * A list of Key Dictionaries describing the physical layout. See the next section for more details.
 

drivers/issi/is31fl3741.c

@@ -97,14 +97,13 @@ bool IS31FL3741_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
     IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM0);
 
     for (int i = 0; i < 342; i += 18) {
-        g_twi_transfer_buffer[0] = i % 180;
-
         if (i == 180) {
             // unlock the command register and select PG2
             IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
             IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM1);
         }
 
+        g_twi_transfer_buffer[0] = i % 180;
         memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 18);
 
 #if ISSI_PERSISTENCE > 0
@@ -251,4 +250,6 @@ void IS31FL3741_set_scaling_registers(const is31_led *pled, uint8_t red, uint8_t
     g_scaling_registers[pled->driver][pled->r] = red;
     g_scaling_registers[pled->driver][pled->g] = green;
     g_scaling_registers[pled->driver][pled->b] = blue;
+
+    g_scaling_registers_update_required[pled->driver] = true;
 }

drivers/issi/is31fl3741.h

@@ -23,14 +23,13 @@
 #include <stdbool.h>
 
 typedef struct is31_led {
-    uint8_t  driver : 2;
-    uint16_t r;
-    uint16_t g;
-    uint16_t b;
+    uint32_t driver : 2;
+    uint32_t r : 10;
+    uint32_t g : 10;
+    uint32_t b : 10;
 } __attribute__((packed)) is31_led;
 
 extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
-extern const is31_led g_is31_indicator_leds[DRIVER_INDICATOR_LED_TOTAL];
 
 void IS31FL3741_init(uint8_t addr);
 void IS31FL3741_write_register(uint8_t addr, uint8_t reg, uint8_t data);

drivers/oled/oled_driver.c

@@ -75,8 +75,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define CHARGE_PUMP 0x8D
 
 // Misc defines
-#define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8)
-#define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)
+#ifndef OLED_BLOCK_COUNT
+#    define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8)
+#endif
+#ifndef OLED_BLOCK_SIZE
+#    define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)
+#endif
+
+#define OLED_ALL_BLOCKS_MASK (((((OLED_BLOCK_TYPE)1 << (OLED_BLOCK_COUNT - 1)) - 1) << 1) | 1)
 
 // i2c defines
 #define I2C_CMD 0x00
@@ -212,7 +218,7 @@ __attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) {
 void oled_clear(void) {
     memset(oled_buffer, 0, sizeof(oled_buffer));
     oled_cursor = &oled_buffer[0];
-    oled_dirty  = -1;  // -1 will be max value as long as display_dirty is unsigned type
+    oled_dirty  = OLED_ALL_BLOCKS_MASK;
 }
 
 static void calc_bounds(uint8_t update_start, uint8_t *cmd_array) {
@@ -262,13 +268,14 @@ static void rotate_90(const uint8_t *src, uint8_t *dest) {
 
 void oled_render(void) {
     // Do we have work to do?
+    oled_dirty &= OLED_ALL_BLOCKS_MASK;
     if (!oled_dirty || oled_scrolling) {
         return;
     }
 
     // Find first dirty block
     uint8_t update_start = 0;
-    while (!(oled_dirty & (1 << update_start))) {
+    while (!(oled_dirty & ((OLED_BLOCK_TYPE)1 << update_start))) {
         ++update_start;
     }
 
@@ -314,7 +321,7 @@ void oled_render(void) {
     oled_on();
 
     // Clear dirty flag
-    oled_dirty &= ~(1 << update_start);
+    oled_dirty &= ~((OLED_BLOCK_TYPE)1 << update_start);
 }
 
 void oled_set_cursor(uint8_t col, uint8_t line) {
@@ -404,9 +411,9 @@ void oled_write_char(const char data, bool invert) {
     // Dirty check
     if (memcmp(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH)) {
         uint16_t index = oled_cursor - &oled_buffer[0];
-        oled_dirty |= (1 << (index / OLED_BLOCK_SIZE));
+        oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE));
         // Edgecase check if the written data spans the 2 chunks
-        oled_dirty |= (1 << ((index + OLED_FONT_WIDTH) / OLED_BLOCK_SIZE));
+        oled_dirty |= ((OLED_BLOCK_TYPE)1 << ((index + OLED_FONT_WIDTH - 1) / OLED_BLOCK_SIZE));
     }
 
     // Finally move to the next char
@@ -441,7 +448,7 @@ void oled_pan(bool left) {
             }
         }
     }
-    oled_dirty = ~((OLED_BLOCK_TYPE)0);
+    oled_dirty = OLED_ALL_BLOCKS_MASK;
 }
 
 oled_buffer_reader_t oled_read_raw(uint16_t start_index) {
@@ -456,7 +463,7 @@ void oled_write_raw_byte(const char data, uint16_t index) {
     if (index > OLED_MATRIX_SIZE) index = OLED_MATRIX_SIZE;
     if (oled_buffer[index] == data) return;
     oled_buffer[index] = data;
-    oled_dirty |= (1 << (index / OLED_BLOCK_SIZE));
+    oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE));
 }
 
 void oled_write_raw(const char *data, uint16_t size) {
@@ -464,21 +471,28 @@ void oled_write_raw(const char *data, uint16_t size) {
     for (uint16_t i = 0; i < size; i++) {
         if (oled_buffer[i] == data[i]) continue;
         oled_buffer[i] = data[i];
-        oled_dirty |= (1 << (i / OLED_BLOCK_SIZE));
+        oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE));
     }
 }
 
 void oled_write_pixel(uint8_t x, uint8_t y, bool on) {
-    if (x >= OLED_DISPLAY_WIDTH || y >= OLED_DISPLAY_HEIGHT) {
+    if (x >= oled_rotation_width) {
         return;
     }
-    uint16_t index = x + (y / 8) * OLED_DISPLAY_WIDTH;
-    if (on) {
-        oled_buffer[index] |= (1 << (y % 8));
-    } else {
-        oled_buffer[index] &= ~(1 << (y % 8));
+    uint16_t index = x + (y / 8) * oled_rotation_width;
+    if (index >= OLED_MATRIX_SIZE) {
+        return;
+    }
+    uint8_t data = oled_buffer[index];
+    if (on) {
+        data |= (1 << (y % 8));
+    } else {
+        data &= ~(1 << (y % 8));
+    }
+    if (oled_buffer[index] != data) {
+        oled_buffer[index] = data;
+        oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE));
     }
-    oled_dirty |= (1 << (index / OLED_BLOCK_SIZE));
 }
 
 #if defined(__AVR__)
@@ -501,7 +515,7 @@ void oled_write_raw_P(const char *data, uint16_t size) {
         uint8_t c = pgm_read_byte(data++);
         if (oled_buffer[i] == c) continue;
         oled_buffer[i] = c;
-        oled_dirty |= (1 << (i / OLED_BLOCK_SIZE));
+        oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE));
     }
 }
 #endif  // defined(__AVR__)
@@ -597,7 +611,7 @@ bool oled_scroll_off(void) {
             return oled_scrolling;
         }
         oled_scrolling = false;
-        oled_dirty     = -1;
+        oled_dirty     = OLED_ALL_BLOCKS_MASK;
     }
     return !oled_scrolling;
 }

keyboards/40percentclub/nein/config.h

@@ -19,8 +19,8 @@
 #include "config_common.h"
 
 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x0A0C
+#define VENDOR_ID       0x3430 // "40"
+#define PRODUCT_ID      0x9999
 #define DEVICE_VER      0x9999
 #define MANUFACTURER    di0ib
 #define PRODUCT         The nein Keyboard

keyboards/40percentclub/nein/info.json

@@ -1,6 +1,6 @@
 {
   "keyboard_name": "nein",
-  "url": "",
+  "url": "http://www.40percent.club/2019/04/nein.html",
   "maintainer": "qmk",
   "width": 3,
   "height": 3,

keyboards/40percentclub/nein/keymaps/via/keymap.c

@@ -0,0 +1,39 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_ortho_3x3(
+        KC_MUTE, KC_HOME, KC_MPLY,
+        MO(1),   KC_UP,   KC_END,
+        KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT_ortho_3x3(
+        RESET,   _______, KC_STOP,
+        _______, _______, RGB_MOD,
+        KC_MPRV, _______, KC_MNXT
+    ),
+    [2] = LAYOUT_ortho_3x3(
+        _______, _______, _______,
+        _______, _______, _______,
+        _______, _______, _______
+    ),
+    [3] = LAYOUT_ortho_3x3(
+        _______, _______, _______,
+        _______, _______, _______,
+        _______, _______, _______
+    ),
+};

keyboards/40percentclub/nein/keymaps/via/rules.mk

@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes

keyboards/ai03/soyuz/keymaps/mrsendyyk/readme.md

@@ -1,19 +0,0 @@
-# Sendy YK's Numpad 5x4 Layout and Keymap
-
-[https://mr.sendyyk.com](https://mr.sendyyk.com)
-
-## Numpad 5x4 Layout
-
-![LAYOUT_numpad_5x4](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/soyuz/assets/layout-numpad-5x4.png)
-
-## Keymap
-
-![_BASE](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/soyuz/assets/layout-numpad-5x4-keymap.png)
-
-## Build The Firmware
-
-You will need to build the firmware. To do so go to your terminal window and run the compile command:
-
-    qmk compile -kb ai03/soyuz -km mrsendyyk
-
-See [The Complete Newbs Guide To QMK](https://docs.qmk.fm/#/newbs).

keyboards/barleycorn/keymaps/via/readme.md

@@ -1,3 +1 @@
 # Compile with this keymap to use VIA
-
-Sadly right now when using VIA, extrakeys is disabled. This means volume control will not work.

keyboards/barleycorn/keymaps/via/rules.mk

@@ -1,3 +1 @@
 VIA_ENABLE = yes
-MOUSEKEY_ENABLE = no
-EXTRAKEY_ENABLE = no

keyboards/basekeys/slice/rev1_rgb/info.json

@@ -1,15 +1,18 @@
 {
-    "keyboard_name": "slice", 
-    "url": "https://www.basekeys.com", 
-    "maintainer": "2Moons", 
-    "width": 17.72, 
-    "height": 5, 
+    "keyboard_name": "slice",
+    "url": "https://www.basekeys.com",
+    "maintainer": "2Moons",
+    "width": 17.72,
+    "height": 5,
     "layouts": {
         "LAYOUT": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.6600000000000001, "y":0}, {"label":"!", "x":2.66, "y":0}, {"label":"@", "x":3.66, "y":0}, {"label":"#", "x":4.66, "y":0}, {"label":"$", "x":5.66, "y":0}, {"label":"%", "x":6.66, "y":0}, {"label":"^", "x":7.66, "y":0}, {"label":"&", "x":9.32, "y":0}, {"label":"*", "x":10.32, "y":0}, {"label":"(", "x":11.32, "y":0}, {"label":")", "x":12.32, "y":0}, {"label":"_", "x":13.32, "y":0}, {"label":"+", "x":14.32, "y":0}, {"label":"Backspace", "x":15.32, "y":0, "w":2}, {"x":0, "y":1}, {"label":"Tab", "x":1.53, "y":1, "w":1.5}, {"label":"Q", "x":3.03, "y":1}, {"label":"W", "x":4.03, "y":1}, {"label":"E", "x":5.03, "y":1}, {"label":"R", "x":6.03, "y":1}, {"label":"T", "x":7.03, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15.05, "y":1}, {"label":"|", "x":16.1, "y":1, "w":1.5}, {"x":0, "y":2}, {"label":"Caps Lock", "x":1.3900000000000001, "y":2, "w":1.75}, {"label":"A", "x":3.14, "y":2}, {"label":"S", "x":4.14, "y":2}, {"label":"D", "x":5.14, "y":2}, {"label":"F", "x":6.14, "y":2}, {"label":"G", "x":7.14, "y":2}, {"label":"H", "x":9.34, "y":2}, {"label":"J", "x":10.34, "y":2}, {"label":"K", "x":11.34, "y":2}, {"label":"L", "x":12.34, "y":2}, {"label":":", "x":13.34, "y":2}, {"label":"\"", "x":14.34, "y":2}, {"label":"Enter", "x":15.34, "y":2, "w":2.25}, {"x":0, "y":3}, {"label":"Shift", "x":1.25, "y":3, "w":2.25}, {"label":"Z", "x":3.5, "y":3}, {"label":"X", "x":4.5, "y":3}, {"label":"C", "x":5.5, "y":3}, {"label":"V", "x":6.5, "y":3}, {"label":"B", "x":7.5, "y":3}, {"label":"B", "x":8.97, "y":3}, {"label":"N", "x":9.97, "y":3}, {"label":"M", "x":10.97, "y":3}, {"label":"<", "x":11.97, "y":3}, {"label":">", "x":12.97, "y":3}, {"label":"?", "x":13.97, "y":3}, {"label":"Shift", "x":14.97, "y":3, "w":1.75}, {"label":"Shift", "x":16.72, "y":3}, {"x":0, "y":4}, {"label":"Ctrl", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.25}, {"label":"\u21d3", "x":4.75, "y":4}, {"x":5.75, "y":4, "w":2.75}, {"x":8.97, "y":4, "w":2.25}, {"label":"\u21d1", "x":11.22, "y":4}, {"label":"Alt", "x":13.98, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.23, "y":4, "w":1.25}, {"label":"Fn", "x":16.48, "y":4}]
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.660, "y":0}, {"label":"!", "x":2.66, "y":0}, {"label":"@", "x":3.66, "y":0}, {"label":"#", "x":4.66, "y":0}, {"label":"$", "x":5.66, "y":0}, {"label":"%", "x":6.66, "y":0}, {"label":"^", "x":7.66, "y":0}, {"label":"&", "x":9.32, "y":0}, {"label":"*", "x":10.32, "y":0}, {"label":"(", "x":11.32, "y":0}, {"label":")", "x":12.32, "y":0}, {"label":"_", "x":13.32, "y":0}, {"label":"+", "x":14.32, "y":0}, {"label":"Backspace", "x":15.32, "y":0, "w":2}, {"x":0, "y":1}, {"label":"Tab", "x":1.53, "y":1, "w":1.5}, {"label":"Q", "x":3.03, "y":1}, {"label":"W", "x":4.03, "y":1}, {"label":"E", "x":5.03, "y":1}, {"label":"R", "x":6.03, "y":1}, {"label":"T", "x":7.03, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15.05, "y":1}, {"label":"|", "x":16.1, "y":1, "w":1.5}, {"x":0, "y":2}, {"label":"Caps Lock", "x":1.390, "y":2, "w":1.75}, {"label":"A", "x":3.14, "y":2}, {"label":"S", "x":4.14, "y":2}, {"label":"D", "x":5.14, "y":2}, {"label":"F", "x":6.14, "y":2}, {"label":"G", "x":7.14, "y":2}, {"label":"H", "x":9.34, "y":2}, {"label":"J", "x":10.34, "y":2}, {"label":"K", "x":11.34, "y":2}, {"label":"L", "x":12.34, "y":2}, {"label":":", "x":13.34, "y":2}, {"label":"\"", "x":14.34, "y":2}, {"label":"Enter", "x":15.34, "y":2, "w":2.25}, {"x":0, "y":3}, {"label":"Shift", "x":1.25, "y":3, "w":2.25}, {"label":"Z", "x":3.5, "y":3}, {"label":"X", "x":4.5, "y":3}, {"label":"C", "x":5.5, "y":3}, {"label":"V", "x":6.5, "y":3}, {"label":"B", "x":7.5, "y":3}, {"label":"B", "x":8.97, "y":3}, {"label":"N", "x":9.97, "y":3}, {"label":"M", "x":10.97, "y":3}, {"label":"<", "x":11.97, "y":3}, {"label":">", "x":12.97, "y":3}, {"label":"?", "x":13.97, "y":3}, {"label":"Shift", "x":14.97, "y":3, "w":1.75}, {"label":"Shift", "x":16.72, "y":3}, {"x":0, "y":4}, {"label":"Ctrl", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.25}, {"label":"\u21d3", "x":4.75, "y":4}, {"x":5.75, "y":4, "w":2.75}, {"x":8.97, "y":4, "w":2.25}, {"label":"\u21d1", "x":11.22, "y":4}, {"label":"Alt", "x":13.98, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.23, "y":4, "w":1.25}, {"label":"Fn", "x":16.48, "y":4}]
         },
-       "LAYOUT_split_left_space": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.6600000000000001, "y":0}, {"label":"!", "x":2.66, "y":0}, {"label":"@", "x":3.66, "y":0}, {"label":"#", "x":4.66, "y":0}, {"label":"$", "x":5.66, "y":0}, {"label":"%", "x":6.66, "y":0}, {"label":"^", "x":7.66, "y":0}, {"label":"&", "x":9.32, "y":0}, {"label":"*", "x":10.32, "y":0}, {"label":"(", "x":11.32, "y":0}, {"label":")", "x":12.32, "y":0}, {"label":"_", "x":13.32, "y":0}, {"label":"+", "x":14.32, "y":0}, {"label":"Backspace", "x":15.32, "y":0, "w":2}, {"x":0, "y":1}, {"label":"Tab", "x":1.53, "y":1, "w":1.5}, {"label":"Q", "x":3.03, "y":1}, {"label":"W", "x":4.03, "y":1}, {"label":"E", "x":5.03, "y":1}, {"label":"R", "x":6.03, "y":1}, {"label":"T", "x":7.03, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15.05, "y":1}, {"label":"|", "x":16.1, "y":1, "w":1.5}, {"x":0, "y":2}, {"label":"Caps Lock", "x":1.3900000000000001, "y":2, "w":1.75}, {"label":"A", "x":3.14, "y":2}, {"label":"S", "x":4.14, "y":2}, {"label":"D", "x":5.14, "y":2}, {"label":"F", "x":6.14, "y":2}, {"label":"G", "x":7.14, "y":2}, {"label":"H", "x":9.34, "y":2}, {"label":"J", "x":10.34, "y":2}, {"label":"K", "x":11.34, "y":2}, {"label":"L", "x":12.34, "y":2}, {"label":":", "x":13.34, "y":2}, {"label":"\"", "x":14.34, "y":2}, {"label":"Enter", "x":15.34, "y":2, "w":2.25}, {"x":0, "y":3}, {"label":"Shift", "x":1.25, "y":3, "w":2.25}, {"label":"Z", "x":3.5, "y":3}, {"label":"X", "x":4.5, "y":3}, {"label":"C", "x":5.5, "y":3}, {"label":"V", "x":6.5, "y":3}, {"label":"B", "x":7.5, "y":3}, {"label":"B", "x":8.97, "y":3}, {"label":"N", "x":9.97, "y":3}, {"label":"M", "x":10.97, "y":3}, {"label":"<", "x":11.97, "y":3}, {"label":">", "x":12.97, "y":3}, {"label":"?", "x":13.97, "y":3}, {"label":"Shift", "x":14.97, "y":3, "w":1.75}, {"label":"Shift", "x":16.72, "y":3}, {"x":0, "y":4}, {"label":"Ctrl", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.25}, {"label":"\u21d3", "x":4.75, "y":4}, {"x":5.75, "y":4, "w":1.75}, {"x":7.5, "y":4}, {"x":8.97, "y":4, "w":2.25}, {"label":"\u21d1", "x":11.22, "y":4}, {"label":"Alt", "x":13.98, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.23, "y":4, "w":1.25}, {"label":"Fn", "x":16.48, "y":4}]
+        "LAYOUT_split_left_space": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.660, "y":0}, {"label":"!", "x":2.66, "y":0}, {"label":"@", "x":3.66, "y":0}, {"label":"#", "x":4.66, "y":0}, {"label":"$", "x":5.66, "y":0}, {"label":"%", "x":6.66, "y":0}, {"label":"^", "x":7.66, "y":0}, {"label":"&", "x":9.32, "y":0}, {"label":"*", "x":10.32, "y":0}, {"label":"(", "x":11.32, "y":0}, {"label":")", "x":12.32, "y":0}, {"label":"_", "x":13.32, "y":0}, {"label":"+", "x":14.32, "y":0}, {"label":"Backspace", "x":15.32, "y":0, "w":2}, {"x":0, "y":1}, {"label":"Tab", "x":1.53, "y":1, "w":1.5}, {"label":"Q", "x":3.03, "y":1}, {"label":"W", "x":4.03, "y":1}, {"label":"E", "x":5.03, "y":1}, {"label":"R", "x":6.03, "y":1}, {"label":"T", "x":7.03, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15.05, "y":1}, {"label":"|", "x":16.1, "y":1, "w":1.5}, {"x":0, "y":2}, {"label":"Caps Lock", "x":1.390, "y":2, "w":1.75}, {"label":"A", "x":3.14, "y":2}, {"label":"S", "x":4.14, "y":2}, {"label":"D", "x":5.14, "y":2}, {"label":"F", "x":6.14, "y":2}, {"label":"G", "x":7.14, "y":2}, {"label":"H", "x":9.34, "y":2}, {"label":"J", "x":10.34, "y":2}, {"label":"K", "x":11.34, "y":2}, {"label":"L", "x":12.34, "y":2}, {"label":":", "x":13.34, "y":2}, {"label":"\"", "x":14.34, "y":2}, {"label":"Enter", "x":15.34, "y":2, "w":2.25}, {"x":0, "y":3}, {"label":"Shift", "x":1.25, "y":3, "w":2.25}, {"label":"Z", "x":3.5, "y":3}, {"label":"X", "x":4.5, "y":3}, {"label":"C", "x":5.5, "y":3}, {"label":"V", "x":6.5, "y":3}, {"label":"B", "x":7.5, "y":3}, {"label":"B", "x":8.97, "y":3}, {"label":"N", "x":9.97, "y":3}, {"label":"M", "x":10.97, "y":3}, {"label":"<", "x":11.97, "y":3}, {"label":">", "x":12.97, "y":3}, {"label":"?", "x":13.97, "y":3}, {"label":"Shift", "x":14.97, "y":3, "w":1.75}, {"label":"Shift", "x":16.72, "y":3}, {"x":0, "y":4}, {"label":"Ctrl", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.25}, {"label":"\u21d3", "x":4.75, "y":4}, {"x":5.75, "y":4, "w":1.75}, {"x":7.5, "y":4}, {"x":8.97, "y":4, "w":2.25}, {"label":"\u21d1", "x":11.22, "y":4}, {"label":"Alt", "x":13.98, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.23, "y":4, "w":1.25}, {"label":"Fn", "x":16.48, "y":4}]
+        },
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.660, "y":0}, {"label":"!", "x":2.66, "y":0}, {"label":"@", "x":3.66, "y":0}, {"label":"#", "x":4.66, "y":0}, {"label":"$", "x":5.66, "y":0}, {"label":"%", "x":6.66, "y":0}, {"label":"^", "x":7.66, "y":0}, {"label":"&", "x":9.32, "y":0}, {"label":"*", "x":10.32, "y":0}, {"label":"(", "x":11.32, "y":0}, {"label":")", "x":12.32, "y":0}, {"label":"_", "x":13.32, "y":0}, {"label":"+", "x":14.32, "y":0}, {"label":"Backspace", "x":15.32, "y":0, "w":2}, {"x":0, "y":1}, {"label":"Tab", "x":1.53, "y":1, "w":1.5}, {"label":"Q", "x":3.03, "y":1}, {"label":"W", "x":4.03, "y":1}, {"label":"E", "x":5.03, "y":1}, {"label":"R", "x":6.03, "y":1}, {"label":"T", "x":7.03, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15.05, "y":1}, {"label":"|", "x":16.1, "y":1, "w":1.5}, {"x":0, "y":2}, {"label":"Caps Lock", "x":1.390, "y":2, "w":1.75}, {"label":"A", "x":3.14, "y":2}, {"label":"S", "x":4.14, "y":2}, {"label":"D", "x":5.14, "y":2}, {"label":"F", "x":6.14, "y":2}, {"label":"G", "x":7.14, "y":2}, {"label":"H", "x":9.34, "y":2}, {"label":"J", "x":10.34, "y":2}, {"label":"K", "x":11.34, "y":2}, {"label":"L", "x":12.34, "y":2}, {"label":":", "x":13.34, "y":2}, {"label":"\"", "x":14.34, "y":2}, {"label":"Enter", "x":15.34, "y":2, "w":2.25}, {"x":0, "y":3}, {"label":"Shift", "x":1.25, "y":3, "w":2.25}, {"label":"Z", "x":3.5, "y":3}, {"label":"X", "x":4.5, "y":3}, {"label":"C", "x":5.5, "y":3}, {"label":"V", "x":6.5, "y":3}, {"label":"B", "x":7.5, "y":3}, {"label":"B", "x":8.97, "y":3}, {"label":"N", "x":9.97, "y":3}, {"label":"M", "x":10.97, "y":3}, {"label":"<", "x":11.97, "y":3}, {"label":">", "x":12.97, "y":3}, {"label":"?", "x":13.97, "y":3}, {"label":"Shift", "x":14.97, "y":3, "w":1.75}, {"label":"Shift", "x":16.72, "y":3}, {"x":0, "y":4}, {"label":"Ctrl", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.25}, {"label":"\u21d3", "x":4.75, "y":4}, {"x":5.75, "y":4, "w":0.917}, {"x":6.667, "y":4, "w":0.916}, {"x":7.583, "y":4, "w":0.917}, {"x":8.97, "y":4, "w":2.25}, {"label":"\u21d1", "x":11.22, "y":4}, {"label":"Alt", "x":13.98, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.23, "y":4, "w":1.25}, {"label":"Fn", "x":16.48, "y":4}]
         }
     }
-}
+}

keyboards/basekeys/slice/rev1_rgb/keymaps/via/keymap.c

@@ -0,0 +1,127 @@
+/* Copyright 2020 2Moons
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "split_util.h"
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_number {
+  _QWERTY,
+  _FN,
+  _LOWER,
+  _RAISE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT_all(
+  //,------------------------------------------------------------------------|   |---------------------------------------------------------------------------.
+       KC_ESC, KC_GRAVE,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,        KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL,      KC_BSPACE,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+       RGB_MODE_FORWARD,  KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,        KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC,   KC_RBRC,   KC_BSLS,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+      RGB_MODE_GRADIENT, KC_CAPS,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,        KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,        KC_ENT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+          RGB_MODE_XMAS, KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,        KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,   KC_RSFT,   KC_RSFT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+                RGB_TOG, KC_LCTL, KC_LALT, KC_LALT,  KC_SPC,  KC_SPC,  KC_SPC,      KC_SPC,  KC_SPC,                            KC_RALT,   KC_RCTL,   MO(_FN)
+  //`------------------------------------------------------------------------|   |---------------------------------------------------------------------------'
+  ),
+
+  [_FN] = LAYOUT_all(
+  //,-------------------------------------------------------------------------|   |---------------------------------------------------------------------------.
+       KC_ESC,  KC_GRAVE,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,       KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,      KC_BSPACE,
+  //|-------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+      _______,            _______, _______, _______, _______, _______, _______,     _______, KC_PSCR, KC_SLCK, KC_PAUSE,  KC_UP, _______,   _______,   _______,
+  //|-------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+      _______,            _______, _______, _______, _______, _______, _______,     _______, KC_HOME, KC_PGUP, KC_LEFT,KC_RIGHT, _______,       _______,
+  //|-------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+      _______,            _______, _______, _______, _______, _______, _______,     _______,  KC_END, KC_PGDN, KC_DOWN, _______, _______,   _______,   _______,
+  //|-------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+      _______,            _______, _______, _______, _______, _______, _______,     _______, _______,                            _______,   _______,   _______
+  //`-------------------------------------------------------------------------|   |---------------------------------------------------------------------------'
+  ),
+
+  [_LOWER] = LAYOUT_all(
+  //,------------------------------------------------------------------------|   |---------------------------------------------------------------------------.
+       KC_ESC, KC_GRAVE,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,        KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL,      KC_BSPACE,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+       RGB_MODE_FORWARD,  KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,        KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC,   KC_RBRC,   KC_BSLS,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+      RGB_MODE_GRADIENT, KC_CAPS,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,        KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,        KC_ENT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+          RGB_MODE_XMAS, KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,        KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,   KC_RSFT,   KC_RSFT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+                RGB_TOG, KC_LCTL, KC_LALT, KC_LALT,  KC_SPC,  KC_SPC,  KC_SPC,      KC_SPC,  KC_SPC,                            KC_RALT,   KC_RCTL,   MO(_FN)
+  //`------------------------------------------------------------------------|   |---------------------------------------------------------------------------'
+  ),
+
+  [_RAISE] = LAYOUT_all(
+  //,------------------------------------------------------------------------|   |---------------------------------------------------------------------------.
+       KC_ESC, KC_GRAVE,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,        KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL,      KC_BSPACE,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+       RGB_MODE_FORWARD,  KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,        KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC,   KC_RBRC,   KC_BSLS,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+      RGB_MODE_GRADIENT, KC_CAPS,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,        KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,        KC_ENT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+          RGB_MODE_XMAS, KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,        KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,   KC_RSFT,   KC_RSFT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+                RGB_TOG, KC_LCTL, KC_LALT, KC_LALT,  KC_SPC,  KC_SPC,  KC_SPC,       KC_SPC,  KC_SPC,                            KC_RALT,   KC_RCTL,   MO(_FN)
+  //`------------------------------------------------------------------------|   |---------------------------------------------------------------------------'
+  )
+};
+
+#ifdef OLED_DRIVER_ENABLE
+
+static void render_qmk_logo(void) {
+    static const char PROGMEM qmk_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
+        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
+        0};
+    oled_write_P(qmk_logo, false);
+}
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    return isLeftHand ? OLED_ROTATION_180 : OLED_ROTATION_0;
+}
+
+void oled_task_user(void) {
+  if (is_keyboard_master()) {
+    // Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+    switch (get_highest_layer(layer_state)) {
+    case _QWERTY:
+      oled_write_P(PSTR("Default\n"), false);
+      break;
+    case _FN:
+      oled_write_P(PSTR("Function\n"), false);
+      break;
+    default:
+      // Or use the write_ln shortcut over adding '\n' to the end of your string
+      oled_write_ln_P(PSTR("Undefined"), false);
+    }
+
+    // Host Keyboard LED Status
+    led_t led_usb_state = host_keyboard_led_state();
+    oled_write_P(led_usb_state.num_lock ? PSTR("NUMLCK ") : PSTR("       "), false);
+    oled_write_P(led_usb_state.caps_lock ? PSTR("CAPLCK ") : PSTR("       "), false);
+    oled_write_P(led_usb_state.scroll_lock ? PSTR("SCRLCK ") : PSTR("       "), false);
+  } else {
+    render_qmk_logo();
+  }
+}
+#endif

keyboards/basekeys/slice/rev1_rgb/rev1_rgb.h

@@ -76,5 +76,23 @@
     { R40,   R41,   R42,   R43,   R44, KC_NO, KC_NO,   KC_NO,   KC_NO } \
   }
 
-
+#define LAYOUT_all( \
+    L00, L01, L02, L03, L04, L05, L06, L07,      R00, R01, R02, R03, R04, R05, R06, \
+    L10, L11, L12, L13, L14, L15, L16,           R10, R11, R12, R13, R14, R15, R16, R17, \
+    L20, L21, L22, L23, L24, L25, L26,           R20, R21, R22, R23, R24, R25, R26, \
+    L30, L31, L32, L33, L34, L35, L36,           R30, R31, R32, R33, R34, R35, R36, R37,\
+    L40, L41, L42, L43, L44, L45, L46,           R40, R41, R42, R43, R44 \
+  ) \
+  { \
+    { L00,   L01,   L02,   L03,   L04,   L05,   L06,   L07,     KC_NO }, \
+    { L10,   L11,   L12,   L13,   L14,   L15,   L16,   KC_NO,   KC_NO }, \
+    { L20,   L21,   L22,   L23,   L24,   L25,   L26,   KC_NO,   KC_NO }, \
+    { L30,   L31,   L32,   L33,   L34,   L35,   L36,   KC_NO,   KC_NO }, \
+    { L40,   L41,   L42,   L43,   L44,   L45,   L46,   KC_NO,   KC_NO },  \
+    { R00,   R01,   R02,   R03,   R04,   R05,   R06,   KC_NO,   KC_NO },  \
+    { R10,   R11,   R12,   R13,   R14,   R15,   R16,     R17,   KC_NO }, \
+    { R20,   R21,   R22,   R23,   R24,   R25,   R26,   KC_NO,   KC_NO }, \
+    { R30,   R31,   R32,   R33,   R34,   R35,   R36,     R37,   KC_NO }, \
+    { R40,   R41,   R42,   R43,   R44, KC_NO, KC_NO,   KC_NO,   KC_NO } \
+  }
 

keyboards/basekeys/trifecta/keymaps/via/keymap.c

@@ -24,7 +24,7 @@ enum layer_names {
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_BASE] = LAYOUT(
-    KC_ESC,  RGB_TOG,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,  KC_DEL,   KC_DEL,
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,  KC_DEL,   KC_DEL,
     KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,             KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,     KC_END,
     KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,             KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                 KC_HOME,
     KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,        MO(_MEDIA),   KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,        KC_UP,

keyboards/bm60poker/bm60poker.c

@@ -0,0 +1,52 @@
+/* Copyright 2020 ipetepete
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "bm60poker.h"
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+  { 0,      1,      2,      3,      4,      5,      6,      7,      8,      9,      10,     11,     12,     13 },
+  { 14,     15,     16,     17,     18,     19,     20,     21,     22,     23,     24,     25,     26,     27 },
+  { 28,     NO_LED, 29,     30,     31,     32,     33,     34,     35,     36,     37,     38,     39,     40 },
+  { NO_LED, 41,     42,     43,     44,     45,     46,     47,     48,     49,     50,     51, NO_LED,     52 },
+  { 53,     54,     55,     NO_LED, NO_LED, NO_LED, 56,     NO_LED, NO_LED, 57,     58, NO_LED,     59,     60 }
+}, {
+    // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace
+    {   0,   0 }, {  15,   0 }, {  30,   0 }, {  45,   0 }, {  60,   0 }, {  75,   0 }, {  90,   0 }, { 105,   0 }, { 120,   0 }, { 135,   0 }, { 150,   0 }, { 165,   0 }, { 180,   0 }, { 202,   0 },
+    // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ],  ,
+    {   7,  16 }, {  22,  16 }, {  37,  16 }, {  52,  16 }, {  67,  16 }, {  82,  16 }, {  97,  16 }, { 112,  16 }, { 127,  16 }, { 142,  16 }, { 157,  16 }, { 172,  16 }, { 187,  16 }, { 206,  16 },
+    // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter
+    {  11,  32 }, {  26,  32 }, {  41,  32 }, {  56,  32 }, {  71,  32 }, {  86,  32 }, { 101,  32 }, { 116,  32 }, { 131,  32 }, { 146,  32 }, { 161,  32 }, { 176,  32 }, { 198,  32 },
+    // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up,
+    {  18,  48 }, {  30,  48 }, {  45,  48 }, {  60,  48 }, {  75,  48 }, {  90,  48 }, { 105,  48 }, { 120,  48 }, { 135,  48 }, { 150,  48 }, { 165,  48 }, { 191,  48 },
+    // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right
+    {   3,  64 }, {  22,  64 }, {  33,  64 }, { 101,  64 }, { 135,  64 }, { 153,  64 }, { 210,  64 }, { 225,  64 },
+    // UNDERGLOW
+    {   216, 32 }, {  180,  32 }, {  144, 32 }, { 108,  32 }, { 72,  32 }, { 36,  32 }
+}, {
+    // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace
+    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ],  ,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right
+    1, 1, 1, 4, 1, 1, 1, 1,
+    // UNDERGLOW
+    2, 2, 2, 2, 2, 2
+} };
+#endif

keyboards/bm60poker/bm60poker.h

@@ -0,0 +1,32 @@
+/* Copyright 2020 ipetepete
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_60_ansi( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,        \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
+    K20,    K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,          \
+    K31,       K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D,            \
+    K40,  K41,  K42,              K46,                K49,  K4A,  K4C,  K4D      \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D   }, \
+    { K20,   KC_NO, K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D   }, \
+    { KC_NO, K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   KC_NO, K3D   }, \
+    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, K49,   K4A,   KC_NO, K4C,   K4D   }, \
+}

keyboards/bm60poker/config.h

@@ -0,0 +1,70 @@
+/*
+Copyright 2020 ipetepete
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4B50 // "KP"
+#define PRODUCT_ID      0xEF8E
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    KP Republic
+#define PRODUCT         BM60POKER
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, E6 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7 }
+
+#define DIODE_DIRECTION COL2ROW
+
+#define RGB_DI_PIN E2
+#define DRIVER_LED_TOTAL 67
+#ifdef RGB_DI_PIN
+    #define RGBLED_NUM 67
+    #define RGB_MATRIX_KEYPRESSES
+    #define RGBLIGHT_HUE_STEP 8
+    #define RGBLIGHT_SAT_STEP 8
+    #define RGBLIGHT_VAL_STEP 8
+    #define RGBLIGHT_LIMIT_VAL 5 /* The maximum brightness level */
+    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+    #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//     #define RGBLIGHT_EFFECT_BREATHING
+//     #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//     #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//     #define RGBLIGHT_EFFECT_SNAKE
+//     #define RGBLIGHT_EFFECT_KNIGHT
+//     #define RGBLIGHT_EFFECT_CHRISTMAS
+//     #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//     #define RGBLIGHT_EFFECT_RGB_TEST
+//     #define RGBLIGHT_EFFECT_ALTERNATING
+#endif

keyboards/bm60poker/info.json

@@ -0,0 +1,74 @@
+{
+    "keyboard_name": "BM60POKER",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_60_ansi": {
+            "layout": [
+                {"label":"K00 (B0,D0)", "x":0, "y":0},
+                {"label":"K01 (B0,D1)", "x":1, "y":0},
+                {"label":"K02 (B0,D2)", "x":2, "y":0},
+                {"label":"K03 (B0,D3)", "x":3, "y":0},
+                {"label":"K04 (B0,D5)", "x":4, "y":0},
+                {"label":"K05 (B0,D4)", "x":5, "y":0},
+                {"label":"K06 (B0,D6)", "x":6, "y":0},
+                {"label":"K07 (B0,D7)", "x":7, "y":0},
+                {"label":"K08 (B0,B4)", "x":8, "y":0},
+                {"label":"K09 (B0,B5)", "x":9, "y":0},
+                {"label":"K0A (B0,B6)", "x":10, "y":0},
+                {"label":"K0B (B0,C6)", "x":11, "y":0},
+                {"label":"K0C (B0,C7)", "x":12, "y":0},
+                {"label":"K0D (B0,F7)", "x":13, "y":0, "w":2},
+                {"label":"K10 (B1,D0)", "x":0, "y":1, "w":1.5},
+                {"label":"K11 (B1,D1)", "x":1.5, "y":1},
+                {"label":"K12 (B1,D2)", "x":2.5, "y":1},
+                {"label":"K13 (B1,D3)", "x":3.5, "y":1},
+                {"label":"K14 (B1,D5)", "x":4.5, "y":1},
+                {"label":"K15 (B1,D4)", "x":5.5, "y":1},
+                {"label":"K16 (B1,D6)", "x":6.5, "y":1},
+                {"label":"K17 (B1,D7)", "x":7.5, "y":1},
+                {"label":"K18 (B1,B4)", "x":8.5, "y":1},
+                {"label":"K19 (B1,B5)", "x":9.5, "y":1},
+                {"label":"K1A (B1,B6)", "x":10.5, "y":1},
+                {"label":"K1B (B1,C6)", "x":11.5, "y":1},
+                {"label":"K1C (B1,C7)", "x":12.5, "y":1},
+                {"label":"K1D (B1,F7)", "x":13.5, "y":1, "w":1.5},
+                {"label":"K20 (B2,D0)", "x":0, "y":2, "w":1.75},
+                {"label":"K22 (B2,D2)", "x":1.75, "y":2},
+                {"label":"K23 (B2,D3)", "x":2.75, "y":2},
+                {"label":"K24 (B2,D5)", "x":3.75, "y":2},
+                {"label":"K25 (B2,D4)", "x":4.75, "y":2},
+                {"label":"K26 (B2,D6)", "x":5.75, "y":2},
+                {"label":"K27 (B2,D7)", "x":6.75, "y":2},
+                {"label":"K28 (B2,B4)", "x":7.75, "y":2},
+                {"label":"K29 (B2,B5)", "x":8.75, "y":2},
+                {"label":"K2A (B2,B6)", "x":9.75, "y":2},
+                {"label":"K2B (B2,C6)", "x":10.75, "y":2},
+                {"label":"K2C (B2,C7)", "x":11.75, "y":2},
+                {"label":"K2D (B2,F7)", "x":12.75, "y":2, "w":2.25},
+                {"label":"K31 (B3,D1)", "x":0, "y":3, "w":2.25},
+                {"label":"K32 (B3,D2)", "x":2.25, "y":3},
+                {"label":"K33 (B3,D3)", "x":3.25, "y":3},
+                {"label":"K34 (B3,D5)", "x":4.25, "y":3},
+                {"label":"K35 (B3,D4)", "x":5.25, "y":3},
+                {"label":"K36 (B3,D6)", "x":6.25, "y":3},
+                {"label":"K37 (B3,D7)", "x":7.25, "y":3},
+                {"label":"K38 (B3,B4)", "x":8.25, "y":3},
+                {"label":"K39 (B3,B5)", "x":9.25, "y":3},
+                {"label":"K3A (B3,B6)", "x":10.25, "y":3},
+                {"label":"K3B (B3,C6)", "x":11.25, "y":3},
+                {"label":"K3D (B3,F7)", "x":12.25, "y":3, "w":2.75},
+                {"label":"K40 (E6,D0)", "x":0, "y":4, "w":1.25},
+                {"label":"K41 (E6,D1)", "x":1.25, "y":4, "w":1.25},
+                {"label":"K42 (E6,D2)", "x":2.5, "y":4, "w":1.25},
+                {"label":"K46 (E6,D6)", "x":3.75, "y":4, "w":6.25},
+                {"label":"K49 (E6,B5)", "x":10, "y":4, "w":1.25},
+                {"label":"K4A (E6,B6)", "x":11.25, "y":4, "w":1.25},
+                {"label":"K4C (E6,C7)", "x":12.5, "y":4, "w":1.25},
+                {"label":"K4D (E6,F7)", "x":13.75, "y":4, "w":1.25}
+            ]
+        }
+    }
+}

keyboards/bm60poker/keymaps/default/keymap.c

@@ -0,0 +1,34 @@
+/* Copyright 2020 ipetepete
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_60_ansi(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT,            KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+        KC_LCTL,   KC_LGUI,   KC_LALT,                       KC_SPC,                              KC_RALT,   KC_RGUI,   MO(1),     KC_RCTL
+    ),
+    [1] = LAYOUT_60_ansi(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______,     RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
+        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,   _______,   _______,                      _______,                              _______,   _______,   _______,   _______
+    ),
+
+};

keyboards/bm60poker/keymaps/ipetepete/keymap.c

@@ -0,0 +1,144 @@
+/* Copyright 2020 ipetepete
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+#include QMK_KEYBOARD_H
+
+enum layers {
+_qwerty,
+_gamer,
+_colemak,
+_fn,
+_rgb,
+_spcfn
+};
+
+
+enum keycodes {
+gamer = SAFE_RANGE,
+qwerty,
+colemak
+};
+
+#define KC_SPFN LT(_spcfn, KC_SPC) // press for space, hold for function layer (aka spacefn)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_qwerty] = LAYOUT_60_ansi(
+        KC_GRV,        KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+        KC_TAB,         KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        CTL_T(KC_ESC), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT,                 KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,
+        KC_LCTL,        KC_LGUI, KC_LALT,                            KC_SPFN,                             KC_RALT, KC_RCTL, MO(_fn),   MO(_rgb)
+    ),
+    // Gamer standard qwerty layout but with normal space for jumping etc
+    [_gamer] = LAYOUT_60_ansi(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______,                            KC_SPACE,                            _______, _______, _______, _______
+    ),
+    [_colemak] = LAYOUT_60_ansi(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,
+        _______, KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN,  _______, _______, _______,
+        _______, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,     KC_QUOT,          _______,
+        _______,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    _______, _______, _______,           _______,
+        _______, _______, _______,                            KC_SPFN,                            _______, _______, _______,  _______
+    ),
+    [_fn] = LAYOUT_60_ansi(
+        KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, _______, KC_UP,   _______, _______, _______, KC_CALC, _______, KC_INS,  _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP,          _______,
+        KC_MPLY,          KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, NK_TOGG, _______, _______, KC_END,  KC_PGDN,          KC_MNXT,
+        qwerty, colemak, gamer,                            _______,                            _______, _______, _______, _______
+    ),
+    [_rgb] = LAYOUT_60_ansi(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, RGB_TOG, _______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, _______, _______, _______, RESET,
+        _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPI, RGB_SPD, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______
+    ),
+    [_spcfn] = LAYOUT_60_ansi(
+        _______, SGUI(1), SGUI(2), SGUI(3), SGUI(4), SGUI(5), SGUI(6), SGUI(7),  SGUI(8), SGUI(9), SGUI(0), _______,  _______, KC_DEL,
+        _______, _______, _______, KC_PGUP, _______, KC_LBRC, KC_RBRC,  _______, KC_UP,   _______, _______, _______,  _______, _______,
+        KC_CAPS, _______, _______, KC_PGDN, _______, KC_LCBR, KC_RCBR,  KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, KC_LPRN, KC_RPRN,  _______, _______, _______, _______,           _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______
+    )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+      case qwerty:
+        if (record->event.pressed) {
+            layer_clear();
+            layer_on(_qwerty);
+            set_single_persistent_default_layer(_qwerty);
+        }
+        return false;
+        break;
+      case colemak:
+        if (record->event.pressed) {
+            layer_clear();
+            layer_on(_colemak);
+        }
+        return false;
+        break;
+      case gamer:
+        if (record->event.pressed) {
+            layer_clear();
+            layer_on(_gamer);
+        }
+        return false;
+        break;
+
+  }
+  return true;
+}
+
+void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue) {
+  for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+    if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) {
+        rgb_matrix_set_color( i, red, green, blue );
+    }
+  }
+}
+
+
+void rgb_matrix_indicators_kb(void)
+{
+	if (!g_suspend_state && rgb_matrix_config.enable) {
+        switch (get_highest_layer(layer_state)) {
+            //case _qwerty:
+            //    rgb_matrix_set_color(26, 0xFF, 0x00, 0x00);
+            //    break;
+            case _colemak:
+                rgb_matrix_set_color(55, 0xFF, 0xFF, 0xFF);
+                break;
+            case _spcfn:
+                rgb_matrix_set_color(22, 0xFF, 0x00, 0x00);
+                rgb_matrix_set_color(35, 0xFF, 0x00, 0x00);
+                rgb_matrix_set_color(36, 0xFF, 0x00, 0x00);
+                rgb_matrix_set_color(37, 0xFF, 0x00, 0x00);
+                break;
+            case _gamer:
+                rgb_matrix_set_color(16, 0xFF, 0x00, 0xFF);
+                rgb_matrix_set_color(29, 0xFF, 0x00, 0xFF);
+                rgb_matrix_set_color(30, 0xFF, 0x00, 0xFF);
+                rgb_matrix_set_color(31, 0xFF, 0x00, 0xFF);
+                break;
+        }
+    }
+}

keyboards/bm60poker/keymaps/ipetepete/readme.md

@@ -0,0 +1 @@
+# Simple 60% for coding

keyboards/bm60poker/keymaps/ipetepete/rules.mk

@@ -0,0 +1 @@
+NKRO_ENABLE = yes # USB Nkey Rollover

keyboards/bm60poker/readme.md

@@ -0,0 +1,15 @@
+# BM60 Poker 60% Mechanical Keyboard RGB PCB
+
+A 60% hotswap inswitch RGB (north facing) keyboard from KP Republic. 
+
+* Keyboard Maintainer: [ipetepete](https://github.com/ipetepete)
+* Hardware Supported: BM60 POKER RGB
+* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60-rgb-poker-60-gh60-hot-swap-custom-mechanical-keyboard-pcb-program-qmk-underglow-type-c)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bm60poker:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+Video tutorials for customizing the layout: [QMK Tutorials](https://www.youtube.com/playlist?list=PLZlceRZZjRugJFL-vnenYnDrbMc6wu_e_) - By MechMerlin

keyboards/bm60poker/rules.mk

@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+RGB_MATRIX_ENABLE = WS2812
+LAYOUTS = 60_ansi

keyboards/bm60rgb_iso/bm60rgb_iso.h

@@ -17,7 +17,7 @@
 
 #include "quantum.h"
 
-#define LAYOUT( \
+#define LAYOUT_60_iso_arrow( \
     K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,        \
     K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,           \
     K20,    K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,   K1D,   \
@@ -30,3 +30,5 @@
     { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D   }, \
     { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, K49,   K4A,   K4B,   K4C,   K4D   }, \
 }
+
+#define LAYOUT LAYOUT_60_iso_arrow

keyboards/bm60rgb_iso/keymaps/default/keymap.c

@@ -16,19 +16,18 @@
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT(
-        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
-        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
-        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS,    KC_ENT,
-        KC_LSFT,   KC_BSLS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_RSFT,        KC_UP,   KC_SLSH,
-        KC_LCTL,   KC_LGUI,   KC_LALT,                       KC_SPC,                              KC_RALT, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
+    [0] = LAYOUT_60_iso_arrow(
+        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+        KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_RSFT, KC_UP,   KC_SLSH,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
     ),
-    [1] = LAYOUT(
-        RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______,     RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______,
-        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______,
-        _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______,
-        _______,   _______,   _______,                      _______,                              _______, _______, _______, _______, _______
+    [1] = LAYOUT_60_iso_arrow(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______,
+        _______, _______, _______,                            _______,                   _______, _______, KC_HOME, KC_PGDN, KC_END
     ),
-
 };

keyboards/boardsource/5x12/keymaps/via/keymap.c

@@ -35,12 +35,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   RESET,   _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
   ),
+
   [3] = LAYOUT_ortho_5x12(
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
   )
 
 };

keyboards/boardwalk/keymaps/default_2x2u/keymap.c

@@ -0,0 +1,90 @@
+/*
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+// Layer shorthand
+enum layer_names {
+    _BASE,
+    _FN,
+    _RAISE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Base Layer
+     * .-----------------------------------------------------------------------------------------------------------------------------.
+     * | ESC    | 1      | 2      | 3      | 4      | 5      | -      | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+     * | TAB    | Q      | W      | E      | R      | T      | [      | ]      | Y      | U      | I      | O      | P      | '      |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+     * | CAP LK | A      | S      | D      | F      | G      | HOME   | PG UP  | H      | J      | K      | L      | ;      | ENTER  |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+     * | LSHIFT | Z      | X      | C      | V      | B      | END    | PG DN  | N      | M      | ,      | .      | /      | RSHIFT |
+     * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+     * | LCTRL  | LGUI   | FN     | LALT   | RAISE  |      SPACE      |      SPACE      | LEFT   | DOWN   | UP     | RIGHT  | RCTRL  |
+     * '-----------------------------------------------------------------------------------------------------------------------------'
+     */
+    [_BASE] = LAYOUT_ortho_2x2u(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_MINS, KC_EQL,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_LBRC, KC_RBRC, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_QUOT,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_HOME, KC_PGUP, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_END,  KC_PGDN, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+        KC_LCTL, KC_LGUI, MO(_FN), KC_LALT, MO(_RAISE),  KC_SPC,             KC_SPC,     KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_RCTL
+    ),
+
+    /* Function Layer
+     * .-----------------------------------------------------------------------------------------------------------------------------.
+     * | `      | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | F11    | F12    | DEL    |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+     * |        |        | MENU   |        |        |        |        |        |        |        |        |        | PRT SC |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+     * |        |        |        |        |        |        |        |        |        |        |        |        |        | RESET  |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+     * |        |        |        |        |        |        |        |        |        | MUTE   | VOL DN | VOL UP | \      |        |
+     * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+     * |        |        |        |        |        |                 |                 |        |        |        |        |        |
+     * '-----------------------------------------------------------------------------------------------------------------------------'
+     */
+    [_FN] = LAYOUT_ortho_2x2u(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, _______, KC_APP,  _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_BSLS, _______,
+        _______, _______, _______, _______, _______,     _______,          _______,      _______, _______, _______, _______, _______
+    ),
+
+    /* Raise Layer
+     * .-----------------------------------------------------------------------------------------------------------------------------.
+     * | `      | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | F11    | F12    | DEL    |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+     * |        |        | MENU   |        |        |        |        |        |        |        |        |        | PRT SC |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+     * |        |        |        |        |        |        |        |        |        |        |        |        |        | RESET  |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+     * |        |        |        |        |        |        |        |        |        | MUTE   | VOL DN | VOL UP | \      |        |
+     * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+     * |        |        |        |        |        |                 |                 |        |        |        |        |        |
+     * '-----------------------------------------------------------------------------------------------------------------------------'
+     */
+    [_RAISE] = LAYOUT_ortho_2x2u(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, _______, KC_APP,  _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_BSLS, _______,
+        _______, _______, _______, _______, _______,     _______,          _______,      _______, _______, _______, _______, _______
+    )
+
+};

keyboards/boardwalk/keymaps/default_2x2u/readme.md

@@ -0,0 +1 @@
+# The default_2x2u keymap for Boardwalk

keyboards/boardwalk/keymaps/niclake/config.h

@@ -0,0 +1,18 @@
+/*
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define TAPPING_TOGGLE 2

keyboards/boardwalk/keymaps/niclake/keymap.c

@@ -0,0 +1,150 @@
+/*
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _BASE,
+    _QWERTY,
+    _FN,
+    _NUM,
+    _ADJ,
+};
+
+enum custom_keycodes {
+    QWERTY = SAFE_RANGE,
+    COLEMAK,
+    FN,
+    NUM,
+    ADJ,
+    MACWIN
+};
+
+#define QWERTY DF(_QWERTY)
+#define COLEMAK DF(_BASE)
+#define FN MO(_FN)
+#define NUM TT(_NUM)
+#define ADJ MO(_ADJ)
+#define MACWIN AG_TOGG
+#define RGB_ON RGB_MODE_PLAIN
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Base Layer (Colemak)
+     * .-----------------------------------------------------------------------------------------------------------------------------.
+     * | `      | 1      | 2      | 3      | 4      | 5      | -      | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+     * | TAB    | Q      | W      | F      | P      | G      | [      | ]      | J      | L      | U      | Y      | ;      | \      |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+     * | _FN    | A      | R      | S      | T      | D      | HOME   | PG UP  | H      | N      | E      | I      | O      | '      |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+     * | LSHIFT | Z      | X      | C      | V      | B      | END    | PG DN  | K      | M      | ,      | .      | /      | RSHIFT |
+     * '--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------'
+     *          | LCTRL  | LALT   | LGUI   | TG_NUM |      ENTER      |      SPACE      | LEFT   | DOWN   | UP     | RIGHT  |
+     *          '-----------------------------------------------------------------------------------------------------------'
+     */
+    [_BASE] = LAYOUT_ortho_hhkb(
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5, KC_MINS, KC_EQL,  KC_6, KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G, KC_LBRC, KC_RBRC, KC_J, KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSLS,
+        FN,      KC_A,    KC_R,    KC_S,    KC_T,    KC_D, KC_HOME, KC_PGUP, KC_H, KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+        KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B, KC_END,  KC_PGDN, KC_K, KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC,
+                 KC_LCTL, KC_LALT, KC_LGUI, NUM,           KC_ENT,  KC_SPC,        KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+    ),
+
+    /* QWERTY
+     * .-----------------------------------------------------------------------------------------------------------------------------.
+     * | `      | 1      | 2      | 3      | 4      | 5      | -      | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+     * | TAB    | Q      | W      | E      | R      | T      | [      | ]      | Y      | U      | I      | O      | P      | \      |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+     * | _FN    | A      | S      | D      | F      | G      | HOME   | PG UP  | H      | J      | K      | L      | ;      | '      |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+     * | LSHIFT | Z      | X      | C      | V      | B      | END    | PG DN  | N      | M      | ,      | .      | /      | RSHIFT |
+     * '--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------'
+     *          | LCTRL  | LALT   | LGUI   | TG_NUM |      ENTER      |      SPACE      | LEFT   | DOWN   | UP     | RIGHT  |
+     *          '-----------------------------------------------------------------------------------------------------------'
+     */
+    [_QWERTY] = LAYOUT_ortho_hhkb(
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5, KC_MINS, KC_EQL,  KC_6, KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS,
+        FN,      KC_A,    KC_S,    KC_D,    KC_F,    KC_G, KC_HOME, KC_PGUP, KC_H, KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+        KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B, KC_END,  KC_PGDN, KC_N, KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC,
+                 KC_LCTL, KC_LALT, KC_LGUI, NUM,           KC_ENT,  KC_SPC,        KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+    ),
+
+    /* FN
+     * .-----------------------------------------------------------------------------------------------------------------------------.
+     * | ESC    | F1     | F2     | F3     | F4     | F5     | F11    | F12    | F6     | F7     | F8     | F9     | F10    | DEL    |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+     * |        | Prev   | Play   | Next   |        |        |        |        |        | Pg Up  | Up     | Pg Dn  | PRT SC |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+     * | XXXXXX |        | Mute   | Vol Dn | Vol Up |        |        |        |        | Left   | Down   | Right  |        |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+     * |        |        |        |        |        |        |        |        |        | Home   |        | End    |        | CapsLk |
+     * '--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------'
+     *          |        |        |        | _ADJ   |                 |                 |        |        |        |        |
+     *          '-----------------------------------------------------------------------------------------------------------'
+     */
+    [_FN] = LAYOUT_ortho_hhkb(
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,    KC_F5,   KC_F11,  KC_F12,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_DEL,
+        _______, KC_MPRV, KC_MPLY, KC_MNXT, _______,  _______, _______, _______, _______, KC_PGUP, KC_UP,   KC_PGDN, KC_PSCR, _______,
+        _______, _______, KC_MUTE, KC_VOLD, KC_VOLU,  _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
+        _______, _______, _______, _______, _______,  _______, _______, _______, _______, KC_HOME, _______, KC_END,  _______, KC_CAPS,
+                 _______, _______, _______, ADJ,               _______, _______,          _______, _______, _______, _______
+    ),
+
+    /* Num Pad (NUM)
+     * .-----------------------------------------------------------------------------------------------------------------------------.
+     * |        |        |        |        |        |        |        |        | Num Lk | KP /   | KP *   | KP -   | Scr Lk | Pause  |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+     * |        |        |        |        |        |        |        |        | KP 7   | KP 8   | KP 9   | KP +   |        |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+     * | _ADJ   |        |        |        |        |        |        |        | KP 4   | KP 5   | KP 6   | KP +   |        |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+     * |        |        |        |        |        |        |        |        | KP 1   | KP 2   | KP 3   | KP Ent |        |        |
+     * '--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------'
+     *          |        |        |        | XXXXXX |                 |      KP 0       | KP 0   | KP .   | KP Ent |        |
+     *          '-----------------------------------------------------------------------------------------------------------'
+     */
+    [_NUM] = LAYOUT_ortho_hhkb(
+        _______, _______, _______, _______, _______, _______, _______, _______, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_SLCK, KC_PAUS,
+        _______, _______, _______, _______, _______, _______, _______, _______, KC_KP_7, KC_KP_8, KC_KP_9, KC_PPLS, _______, _______,
+        ADJ,     _______, _______, _______, _______, _______, _______, _______, KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT, _______, _______,
+                 _______, _______, _______, _______,          _______, KC_KP_0,          KC_KP_0, KC_PDOT, KC_PENT, _______
+    ),
+
+    /* ADJUST + RGB Control
+     * .-----------------------------------------------------------------------------------------------------------------------------.
+     * |        | Static | Breath | Rainbw | Swirl  | Gradnt | Test   |        |        |        |        |        |        |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+     * |        | On/Off | ModeUp | Hue Up | Sat Up | Val Up |        |        |        |        |        |        | RESET  |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+     * | XXXXXX | MACWIN |        | Hue Dn | Sat Dn | Val Dn |        |        |        |        |        |        |        |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+     * |        | Colemak| QWERTY |        |        |        |        |        |        |        |        |        |        |        |
+     * '--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------'
+     *          |        |        |        | XXXXXX |                 |                 |        |        |        |        |
+     *          '-----------------------------------------------------------------------------------------------------------'
+     */
+    [_ADJ] = LAYOUT_ortho_hhkb(
+        _______, RGB_ON,  RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_G, RGB_M_T, _______, _______, _______, _______, _______, _______, _______,
+        _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI,  RGB_VAI, _______, _______, _______, _______, _______, _______, RESET,   _______,
+        _______, MACWIN,  _______, RGB_HUD, RGB_SAD,  RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, COLEMAK, QWERTY,  _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______,
+                 _______, _______, _______, _______,           _______, _______,          _______, _______, _______, _______
+    )
+
+};

keyboards/boardwalk/keymaps/niclake/readme.md

@@ -0,0 +1,8 @@
+# Nic Lake's Boardwalk Layout
+
+This is Nic's Boardwalk layout, which is based off of the default Pok3r layout.
+
+- Colemak base layer w/ QWERTY support
+- Bottom row set up for Mac usage (use `MACWIN`/`AG_TOGG` to toggle)
+- Latching Numpad layer for data entry
+- Uses [Space Cadet shift keys](https://docs.qmk.fm/#/feature_space_cadet?id=usage)

keyboards/boardwalk/keymaps/niclake/rules.mk

@@ -0,0 +1,3 @@
+COMMAND_ENABLE   = no
+RGBLIGHT_ENABLE  = yes
+BOOTMAGIC_ENABLE = full

keyboards/clawsome/fightpad/config.h

@@ -0,0 +1,45 @@
+/*
+Copyright 2020 AAClawson (AlisGraveNil)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x7767
+#define PRODUCT_ID      0x481C
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    AlisGraveNil
+#define PRODUCT         FightPad
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 7
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B5, B6 }
+#define MATRIX_COL_PINS { D7, E6, B4, B2, B3, B1, F7 }
+
+#define DIODE_DIRECTION COL2ROW

keyboards/clawsome/fightpad/fightpad.c

@@ -0,0 +1,16 @@
+/* Copyright 2020 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "fightpad.h"

keyboards/clawsome/fightpad/fightpad.h

@@ -0,0 +1,26 @@
+/* Copyright 2020 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+         K01,           K03, K04, K05, K06,   \
+    K10, K11, K12,      K13, K14, K15, K16    \
+) { \
+    { KC_NO, K01,   KC_NO, K03,   K04,   K05,   K06   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16   }, \
+}

keyboards/clawsome/fightpad/info.json

@@ -0,0 +1,25 @@
+{
+    "keyboard_name": "FightPad",
+    "url": "www.clawboards.xyz",
+    "maintainer": "AAClawson (AlisGraveNil)",
+    "width": 8,
+    "height": 2,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"K01 (B5,E6)", "x":1, "y":0},
+                {"label":"K03 (B5,B2)", "x":4, "y":0},
+                {"label":"K04 (B5,B3)", "x":5, "y":0},
+                {"label":"K05 (B5,B1)", "x":6, "y":0},
+                {"label":"K06 (B5,F7)", "x":7, "y":0},
+                {"label":"K10 (B6,D7)", "x":0, "y":1},
+                {"label":"K11 (B6,E6)", "x":1, "y":1},
+                {"label":"K12 (B6,B4)", "x":2, "y":1},
+                {"label":"K13 (B6,B2)", "x":4, "y":1},
+                {"label":"K14 (B6,B3)", "x":5, "y":1},
+                {"label":"K15 (B6,B1)", "x":6, "y":1},
+                {"label":"K16 (B6,F7)", "x":7, "y":1}
+            ]
+        }
+    }
+}

keyboards/clawsome/fightpad/keymaps/default/keymap.c

@@ -1,28 +1,25 @@
-/* Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
- * Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+/* Copyright 2020 REPLACE_WITH_YOUR_NAME
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 2 of the License, or
  * (at your option) any later version.
  *
- *This program is distributed in the hope that it will be useful,
+ * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
+ */
+#include QMK_KEYBOARD_H
 
-#include "config_common.h"
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+                 KC_W,                      KC_U,    KC_I,    KC_O,    KC_P,
+        KC_A,    KC_S,    KC_D,             KC_H,    KC_J,    KC_K,    KC_L
+    ),
 
-#ifndef CONFIG_H
-#define CONFIG_H
+};
 
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0xCA40
-#define MANUFACTURER    MECHKEYS
-#define PRODUCT         Mechmini
-#define DESCRIPTION     40% modular keyboard
-
-#endif

keyboards/clawsome/fightpad/readme.md

@@ -0,0 +1,13 @@
+# FightPad
+
+This is a 2x7 macropad.
+
+* Keyboard Maintainer: [AAClawson](https://github.com/AlisGraveNil)
+* Hardware Supported: FightPad; Pro Micro or Elite-C
+* Hardware Availability: [Clawsome Boards](https://www.clawboards.xyz/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make clawsome/fightpad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/clawsome/fightpad/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/crkbd/rev1/legacy/matrix.c

@@ -155,6 +155,7 @@ void matrix_init(void)
 
 uint8_t _matrix_scan(void)
 {
+    bool changed = false;
     // Right hand is stored after the left in the matirx so, we need to offset it
     int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
 
@@ -163,6 +164,7 @@ uint8_t _matrix_scan(void)
         _delay_us(30);  // without this wait read unstable value.
         matrix_row_t cols = read_cols();
         if (matrix_debouncing[i+offset] != cols) {
+            changed = true;
             matrix_debouncing[i+offset] = cols;
             debouncing = DEBOUNCE;
         }
@@ -179,7 +181,7 @@ uint8_t _matrix_scan(void)
         }
     }
 
-    return 1;
+    return changed;
 }
 
 #ifdef USE_MATRIX_I2C
@@ -237,16 +239,17 @@ int serial_transaction(int master_changed) {
 
 uint8_t matrix_scan(void)
 {
+    bool changed = false;
     if (is_master) {
-        matrix_master_scan();
+        changed |= matrix_master_scan();
     }else{
-        matrix_slave_scan();
+        changed |= matrix_slave_scan();
         int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
         memcpy(&matrix[offset],
                (void *)serial_master_buffer, SERIAL_MASTER_BUFFER_LENGTH);
         matrix_scan_quantum();
     }
-    return 1;
+    return (uint8_t) changed;
 }
 
 
@@ -297,8 +300,8 @@ uint8_t matrix_master_scan(void) {
     return ret;
 }
 
-void matrix_slave_scan(void) {
-    _matrix_scan();
+uint8_t matrix_slave_scan(void) {
+    int ret = _matrix_scan();
 
     int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
 
@@ -314,7 +317,7 @@ void matrix_slave_scan(void) {
     for (int i = 0; i < ROWS_PER_HAND; ++i) {
   #ifdef SERIAL_USE_MULTI_TRANSACTION
         if( serial_slave_buffer[i] != matrix[offset+i] )
-	    change = 1;
+        change = 1;
   #endif
         serial_slave_buffer[i] = matrix[offset+i];
     }
@@ -322,6 +325,7 @@ void matrix_slave_scan(void) {
     slave_buffer_change_count += change;
   #endif
 #endif
+    return ret;
 }
 
 bool matrix_is_modified(void)

keyboards/crkbd/rev1/legacy/split_util.h

@@ -27,7 +27,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 extern volatile bool isLeftHand;
 
 // slave version of matix scan, defined in matrix.c
-void matrix_slave_scan(void);
+uint8_t matrix_slave_scan(void);
 
 void split_keyboard_setup(void);
 bool has_usb(void);

keyboards/dz60/keymaps/mrsendyyk/keymap.c

@@ -1,98 +0,0 @@
-/* Copyright (C) 2020 Sendy YK (https://mr.sendyyk.com).
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- */
- 
-#include QMK_KEYBOARD_H
-
-enum layer_names {
-    _BASE, // Default Layer
-    _FN, // Fn Layer 1
-    _SETTINGS // Fn Layer 2
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {  
-    // Default Layer
-    [_BASE] = LAYOUT_60_ansi_arrow(
-        KC_GESC, KC_1,    KC_2, KC_3,    KC_4, KC_5, KC_6,   KC_7, KC_8, KC_9,    KC_0,           KC_MINS,        KC_EQL,           KC_BSPC,
-        KC_TAB,           KC_Q, KC_W,    KC_E, KC_R, KC_T,   KC_Y, KC_U, KC_I,    KC_O,           KC_P,           KC_LBRC, KC_RBRC, KC_BSLS,
-        KC_CAPS,          KC_A, KC_S,    KC_D, KC_F, KC_G,   KC_H, KC_J, KC_K,    KC_L,           KC_SCLN,        KC_QUOT, KC_ENT,
-        KC_LSFT,          KC_Z, KC_X,    KC_C, KC_V, KC_B,   KC_N, KC_M, KC_COMM, KC_DOT,                         KC_RSFT, KC_UP,   KC_SLSH,
-        KC_LCTL, KC_LGUI,       KC_LALT,             KC_SPC,                      LT(2, KC_RALT), LT(1, KC_RCTL), KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-    // Fn Layer 1
-    [_FN] = LAYOUT_60_ansi_arrow(
-        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_DEL,
-        KC_BRIU,          KC_TRNS, KC_TRNS, KC_END,  RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_EJCT,
-        KC_BRID,          KC_TRNS, KC_SLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE,
-        KC_VOLU,          KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_NLCK, KC_MAIL, KC_TRNS, KC_TRNS,          KC_PAUS, KC_PGUP, KC_TRNS,
-        KC_VOLD, KC_MRWD,          KC_MFFD,                   KC_MPLY,                            KC_MSTP, KC_TRNS, KC_MPRV, KC_PGDN, KC_MNXT
-    ),
-    // Fn Layer 2
-    [_SETTINGS] = LAYOUT_60_ansi_arrow(
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-        KC_TRNS,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC,  BL_TOGG, BL_INC,  BL_STEP, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS, KC_TRNS,          KC_TRNS,                   KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
-    )
-};
-
-void keyboard_post_init_user(void) {
-    rgblight_enable_noeeprom();
-    rgblight_sethsv_noeeprom(0, 0, 0);
-}
-
-// RGB Lighting/LED/Underglow as Caps Lock, Num Lock, Scroll Lock, and Layer Indicator
-void update_led(void) {
-    // Num Lock Indicator
-    if (host_keyboard_led_state().num_lock) {
-        rgblight_setrgb(225, 8, 0);
-    }
-    // Scroll Lock Indicator
-    if (host_keyboard_led_state().scroll_lock) {
-        rgblight_setrgb(255, 110, 0);
-    }
-}
-
-void led_set_user(uint8_t usb_led) {
-    // Caps Lock Indicator
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        writePinLow(B2);
-        rgblight_setrgb(100, 255, 100);
-    }
-    // Layer Indicator
-    else {          
-        switch (get_highest_layer(layer_state)) {
-            // Fn Layer 1 Indicator
-            case _FN:
-                rgblight_setrgb(100, 255, 100);
-                break;
-            // Fn Layer 2 Indicator
-            case _SETTINGS:
-                rgblight_setrgb(100, 255, 100);
-                break;
-            // Default Layer Indicator
-            case _BASE:
-                rgblight_setrgb(0, 0, 0);
-                break;
-        }
-        update_led();
-    }
-}
-
-layer_state_t layer_state_set_user(layer_state_t state) {
-    update_led();
-    return state;
-}

keyboards/dz60/keymaps/mrsendyyk/readme.md

@@ -1,85 +0,0 @@
-# Sendy YK's 60% ANSI Arrow Layout and Keymap
-
-[https://mr.sendyyk.com](https://mr.sendyyk.com)
-
-## 60% ANSI Arrow Layout
-
-![LAYOUT_60_ansi_arrow](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow.png)
-
-## Keymap
-
-### Default Layer
-
-![_BASE](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-0.png)
-
-### Fn Layer 1
-
-Press and hold *right* **Ctrl** key.
-
-![_FN](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-1.png)
-
-### Fn Layer 2
-
-Press and hold *right* **Alt** key.
-
-![_SETTINGS](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-2.png)
-
-### RGB Lighting/LED/Underglow as Caps Lock, Num Lock, Scroll Lock, and Layer Indicator
-
-#### Caps Lock Indicator
-
-```c
-    // Caps Lock Indicator
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        writePinLow(B2);
-        rgblight_setrgb(100, 255, 100);
-    }
-```
-
-#### Num Lock Indicator
-
-```c
-    // Num Lock Indicator
-    if (host_keyboard_led_state().num_lock) {
-        rgblight_setrgb(225, 8, 0);
-    }
-```
-
-#### Scroll Lock Indicator
-```c
-    // Scroll Lock Indicator
-    if (host_keyboard_led_state().scroll_lock) {
-        rgblight_setrgb(255, 110, 0);
-    }
-```
-
-#### Layer Indicator
-
-```c
-    // Layer Indicator
-    else {          
-        switch (get_highest_layer(layer_state)) {
-            // Fn Layer 1 Indicator
-            case _FN:
-                rgblight_setrgb(100, 255, 100);
-                break;
-            // Fn Layer 2 Indicator
-            case _SETTINGS:
-                rgblight_setrgb(100, 255, 100);
-                break;
-            // Default Layer Indicator
-            case _BASE:
-                rgblight_setrgb(0, 0, 0);
-                break;
-        }
-        update_led();
-    }
-```
-
-## Build The Firmware
-
-You will need to build the firmware. To do so go to your terminal window and run the compile command:
-
-    qmk compile -kb dz60 -km mrsendyyk
-
-See [The Complete Newbs Guide To QMK](https://docs.qmk.fm/#/newbs).

keyboards/dz60/keymaps/pevecyan/keymap.c

@@ -8,11 +8,11 @@
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [0] = LAYOUT( \
-    KC_GESC,SI_1,   SI_2,   SI_3,   SI_4,   SI_5,   SI_6,   SI_7,   SI_8,   SI_9,   SI_0,   SI_QOT, SI_PLUS,XXXXXXX,KC_BSPC, \
-    KC_TAB,         SI_Q,   SI_W,   SI_E,   SI_R,   SI_T,   SI_Z,   SI_U,   SI_I,   SI_O,   SI_P,   SI_GRV, SI_TILD,CARON,   \
-    MO(2),          SI_A,   SI_S,   SI_D,   SI_F,   SI_G,   SI_H,   SI_J,   SI_K,   SI_L,   KC_SCLN,KC_QUOT,KC_ENT,          \
+    KC_GESC,SI_1,   SI_2,   SI_3,   SI_4,   SI_5,   SI_6,   SI_7,   SI_8,   SI_9,   SI_0,   SI_QUOT, SI_PLUS,XXXXXXX,KC_BSPC, \
+    KC_TAB,         SI_Q,   SI_W,   SI_E,   SI_R,   SI_T,   SI_Z,   SI_U,   SI_I,   SI_O,   SI_P,    SI_GRV, SI_TILD,CARON,   \
+    MO(2),          SI_A,   SI_S,   SI_D,   SI_F,   SI_G,   SI_H,   SI_J,   SI_K,   SI_L,   KC_SCLN, KC_QUOT,KC_ENT,          \
     KC_LSFT,XXXXXXX,SI_Y,   SI_X,   SI_C,   SI_V,   SI_B,   SI_N,   SI_M,   SI_COMM,SI_DOT, SI_MINS,        KC_RSFT,XXXXXXX, \
-    KC_LCTL,KC_LGUI,        KC_LALT,KC_SPC,         KC_SPC,         KC_SPC,         KC_RALT,MO(3),  XXXXXXX,MO(1),  KC_F5    \
+    KC_LCTL,KC_LGUI,        KC_LALT,KC_SPC,         KC_SPC,         KC_SPC,         KC_RALT,MO(3),   XXXXXXX,MO(1),  KC_F5    \
   ),
 
   [1] = LAYOUT( \
@@ -33,9 +33,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [3] = LAYOUT( \
     _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
-    _______,        _______,_______,_______,_______,_______,SI_ZV,  _______,_______,_______,_______,_______,_______,_______, \
-    _______,        _______,SI_SV,  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,         \
-    _______,_______,_______,_______,SI_CV,  _______,_______,_______,_______,_______,_______,_______,        _______,_______, \
+    _______,        _______,_______,_______,_______,_______,SI_ZCAR,_______,_______,_______,_______,_______,_______,_______, \
+    _______,        _______,SI_SCAR,  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,         \
+    _______,_______,_______,_______,SI_CCAR,  _______,_______,_______,_______,_______,_______,_______,        _______,_______, \
     _______,_______,        _______,_______,        _______,        _______,        _______,_______,_______,_______,_______  \
   ),
 };

keyboards/emajesty/eiri/config.h

@@ -0,0 +1,96 @@
+/*
+Copyright 2020 EMajesty
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x9372
+#define DEVICE_VER   0x0001
+#define MANUFACTURER EMajesty
+#define PRODUCT      eiri
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B4, B5, B2, B6 }
+#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6, B3, B1, F7, F6, F5, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0

keyboards/emajesty/eiri/eiri.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 EMajesty
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "eiri.h"

keyboards/emajesty/eiri/eiri.h

@@ -0,0 +1,40 @@
+/* Copyright 2020 EMajesty
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05,               K06, K07, K08, K09, K10, K11, \
+    K12, K13, K14, K15, K16, K17,               K18, K19, K20, K21, K22, K23, \
+    K24, K25, K26, K27, K28, K29,               K30, K31, K32, K33, K34, K35, \
+              K36, K37, K38, K39, K40,     K41, K42, K43, K44, K45 \
+) { \
+    { K00,   K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11   }, \
+    { K12,   K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23   }, \
+    { K24,   K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35   }, \
+    { KC_NO, K36, K37, K38, K39, K40, K41, K42, K43, K44, K45, KC_NO } \
+}
+

keyboards/emajesty/eiri/info.json

@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "eiri",
+    "url": "https://github.com/EMajesty/eiri",
+    "maintainer": "EMajesty",
+    "width": 15,
+    "height": 4.5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"x":3, "y":0}, {"x":11, "y":0}, {"x":2, "y":0.25}, {"x":4, "y":0.25}, {"x":10, "y":0.25}, {"x":12, "y":0.25}, {"x":1, "y":0.5}, {"x":5, "y":0.5}, {"x":9, "y":0.5}, {"x":13, "y":0.5}, {"x":0, "y":0.75}, {"x":14, "y":0.75}, {"x":3, "y":1}, {"x":11, "y":1}, {"x":2, "y":1.25}, {"x":4, "y":1.25}, {"x":10, "y":1.25}, {"x":12, "y":1.25}, {"x":1, "y":1.5}, {"x":5, "y":1.5}, {"x":9, "y":1.5}, {"x":13, "y":1.5}, {"x":0, "y":1.75}, {"x":14, "y":1.75}, {"x":3, "y":2}, {"x":11, "y":2}, {"x":2, "y":2.25}, {"x":4, "y":2.25}, {"x":10, "y":2.25}, {"x":12, "y":2.25}, {"x":1, "y":2.5}, {"x":5, "y":2.5}, {"x":9, "y":2.5}, {"x":13, "y":2.5}, {"x":0, "y":2.75}, {"x":14, "y":2.75}, {"x":3, "y":3}, {"x":11, "y":3}, {"x":2, "y":3.25}, {"x":4, "y":3.25}, {"x":10, "y":3.25}, {"x":12, "y":3.25}, {"x":5, "y":3.5}, {"x":6, "y":3.5}, {"x":8, "y":3.5}, {"x":9, "y":3.5}]
+        }
+    }
+}

keyboards/emajesty/eiri/keymaps/default/keymap.c

@@ -0,0 +1,34 @@
+/* Copyright 2020 EMajesty
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                           KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS,
+        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                           KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                           KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+                          KC_LGUI, KC_LALT, KC_SPC,  KC_DEL,  MO(1),        MO(2),   KC_ENT, KC_BSPC, KC_RALT, KC_RGUI),
+    [1] = LAYOUT(
+        KC_ESC,  _______, KC_UP,   _______, KC_HOME, KC_PGUP,                        _______, _______, _______, KC_LPRN, KC_RPRN, KC_GRV,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_PGDN,                        _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______,
+        _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______,                        _______, _______, _______, KC_LCBR, KC_RCBR, _______,
+                          _______, _______, _______, _______, _______,      _______, _______, _______, _______, _______),
+    [2] = LAYOUT(
+        RESET,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                           KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
+        _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                        KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                          KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+                          _______, _______, _______, _______, _______,      _______, _______, _______, _______, _______)
+};

keyboards/emajesty/eiri/keymaps/default/readme.md

@@ -0,0 +1,3 @@
+![default keymap](https://imgur.com/F3L3z8w.png)
+
+# The default keymap for eiri

keyboards/emajesty/eiri/readme.md

@@ -0,0 +1,19 @@
+# eiri
+
+![eiri](https://imgur.com/ZiLTj3Pl.png)
+
+An Atreus-inspired 40% keyboard with 6 columns
+
+* Keyboard Maintainer: [EMajesty](https://github.com/EMajesty)
+* Hardware Supported: eiri pcb
+* Hardware Availability: [Project is open source](https://github.com/EMajesty/eiri)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make emajesty/eiri:default
+
+Flashing example for this keyboard:
+
+    make emajesty/eiri:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/emajesty/eiri/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/ergodash/rev1/keymaps/333fred/config.h

@@ -1,3 +1,25 @@
+/*
+  Copyright (c) 2020 Fred Silberberg
+
+  Permission is hereby granted, free of charge, to any person obtaining a copy
+  of this software and associated documentation files (the "Software"), to deal
+  in the Software without restriction, including without limitation the rights
+  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+  copies of the Software, and to permit persons to whom the Software is
+  furnished to do so, subject to the following conditions:
+
+  The above copyright notice and this permission notice shall be included in all
+  copies or substantial portions of the Software.
+
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+  THE SOFTWARE.
+*/
+
 #pragma once
 
 #include QMK_KEYBOARD_CONFIG_H

keyboards/ergodash/rev1/keymaps/333fred/keymap.c

@@ -1,3 +1,25 @@
+/*
+  Copyright (c) 2020 Fred Silberberg
+
+  Permission is hereby granted, free of charge, to any person obtaining a copy
+  of this software and associated documentation files (the "Software"), to deal
+  in the Software without restriction, including without limitation the rights
+  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+  copies of the Software, and to permit persons to whom the Software is
+  furnished to do so, subject to the following conditions:
+
+  The above copyright notice and this permission notice shall be included in all
+  copies or substantial portions of the Software.
+
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+  THE SOFTWARE.
+*/
+
 #include QMK_KEYBOARD_H
 #include "333fred.h"
 

keyboards/ergodox_ez/config.h

@@ -32,6 +32,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2)
 #define MATRIX_COLS 6
 
+#define COL_EXPANDED { true, true, true, true, true, true, true, false, false, false, false, false, false, false }
+#define MATRIX_ONBOARD_ROW_PINS { 0, 0, 0, 0, 0, 0, 0, B0,  B1,  B2,  B3,  D2,  D3,  C6 }
+#define MATRIX_ONBOARD_COL_PINS { F0,  F1,  F4,  F5,  F6,  F7 }
+#define DIODE_DIRECTION COL2ROW
+#define EXPANDER_COL_REGISTER GPIOB
+#define EXPANDER_ROW_REGISTER GPIOA
+#define MATRIX_EXPANDER_COL_PINS { 5, 4, 3, 2, 1, 0 }
+#define MATRIX_EXPANDER_ROW_PINS { 0, 1, 2, 3, 4, 5, 6 }
+
+
 #define MOUSEKEY_INTERVAL       20
 #define MOUSEKEY_DELAY          0
 #define MOUSEKEY_TIME_TO_MAX    60

keyboards/ergodox_ez/ergodox_ez.c

@@ -1,4 +1,4 @@
-#include QMK_KEYBOARD_H
+#include "ergodox_ez.h"
 
 extern inline void ergodox_board_led_on(void);
 extern inline void ergodox_right_led_1_on(void);

keyboards/ergodox_ez/ergodox_ez.h

@@ -4,10 +4,6 @@
 #include <stdint.h>
 #include <stdbool.h>
 #include "i2c_master.h"
-#include <util/delay.h>
-
-#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
-#define CPU_16MHz       0x00
 
 // I2C aliases and register addresses (see "mcp23018.md")
 #define I2C_ADDR        0b0100000

keyboards/ergodox_ez/matrix.c

@@ -30,7 +30,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "util.h"
 #include "matrix.h"
 #include "debounce.h"
-#include QMK_KEYBOARD_H
+#include "ergodox_ez.h"
+
 
 /*
  * This constant define not debouncing time in msecs, assuming eager_pr.
@@ -45,8 +46,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 /* matrix state(1:on, 0:off) */
-static matrix_row_t raw_matrix[MATRIX_ROWS];  // raw values
-static matrix_row_t matrix[MATRIX_ROWS];      // debounced values
+extern matrix_row_t matrix[MATRIX_ROWS];      // debounced values
+extern matrix_row_t raw_matrix[MATRIX_ROWS];  // raw values
 
 static matrix_row_t read_cols(uint8_t row);
 static void         init_cols(void);
@@ -54,132 +55,62 @@ static void         unselect_rows(void);
 static void         select_row(uint8_t row);
 
 static uint8_t mcp23018_reset_loop;
-// static uint16_t mcp23018_reset_loop;
 
-__attribute__((weak)) void matrix_init_user(void) {}
+void matrix_init_custom(void) {
+    // initialize row and col
 
-__attribute__((weak)) void matrix_scan_user(void) {}
+    mcp23018_status = init_mcp23018();
 
-__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
-
-__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
-
-inline uint8_t matrix_rows(void) { return MATRIX_ROWS; }
-
-inline uint8_t matrix_cols(void) { return MATRIX_COLS; }
-
-void matrix_init(void) {
-  // initialize row and col
-
-  mcp23018_status = init_mcp23018();
-
-  unselect_rows();
-  init_cols();
-
-  // initialize matrix state: all keys off
-  for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-    matrix[i]     = 0;
-    raw_matrix[i] = 0;
-  }
-
-  debounce_init(MATRIX_ROWS);
-  matrix_init_quantum();
-}
-
-void matrix_power_up(void) {
-  mcp23018_status = init_mcp23018();
-
-  unselect_rows();
-  init_cols();
-
-  // initialize matrix state: all keys off
-  for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-    matrix[i] = 0;
-  }
+    unselect_rows();
+    init_cols();
 }
 
 // Reads and stores a row, returning
 // whether a change occurred.
 static inline bool store_raw_matrix_row(uint8_t index) {
-  matrix_row_t temp = read_cols(index);
-  if (raw_matrix[index] != temp) {
-    raw_matrix[index] = temp;
-    return true;
-  }
-  return false;
+    matrix_row_t temp = read_cols(index);
+    if (raw_matrix[index] != temp) {
+        raw_matrix[index] = temp;
+        return true;
+    }
+    return false;
 }
 
-uint8_t matrix_scan(void) {
-  if (mcp23018_status) {  // if there was an error
-    if (++mcp23018_reset_loop == 0) {
-      // if (++mcp23018_reset_loop >= 1300) {
-      // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
-      // this will be approx bit more frequent than once per second
-      print("trying to reset mcp23018\n");
-      mcp23018_status = init_mcp23018();
-      if (mcp23018_status) {
-        print("left side not responding\n");
-      } else {
-        print("left side attached\n");
-        ergodox_blink_all_leds();
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+    if (mcp23018_status) {  // if there was an error
+        if (++mcp23018_reset_loop == 0) {
+            print("trying to reset mcp23018\n");
+            mcp23018_status = init_mcp23018();
+            if (mcp23018_status) {
+                print("left side not responding\n");
+            } else {
+                print("left side attached\n");
+                ergodox_blink_all_leds();
 #ifdef RGB_MATRIX_ENABLE
-        rgb_matrix_init(); // re-init driver on reconnect
+                rgb_matrix_init();  // re-init driver on reconnect
 #endif
-      }
+            }
+        }
     }
-  }
 
 #ifdef LEFT_LEDS
-  mcp23018_status = ergodox_left_leds_update();
+    mcp23018_status = ergodox_left_leds_update();
 #endif  // LEFT_LEDS
-  bool changed = false;
-  for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
-    // select rows from left and right hands
-    uint8_t left_index = i;
-    uint8_t right_index = i + MATRIX_ROWS_PER_SIDE;
-    select_row(left_index);
-    select_row(right_index);
+    bool changed = false;
+    for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
+        // select rows from left and right hands
+        uint8_t left_index  = i;
+        uint8_t right_index = i + MATRIX_ROWS_PER_SIDE;
+        select_row(left_index);
+        select_row(right_index);
 
-    // we don't need a 30us delay anymore, because selecting a
-    // left-hand row requires more than 30us for i2c.
+        changed |= store_raw_matrix_row(left_index);
+        changed |= store_raw_matrix_row(right_index);
 
-    changed |= store_raw_matrix_row(left_index);
-    changed |= store_raw_matrix_row(right_index);
+        unselect_rows();
+    }
 
-    unselect_rows();
-  }
-
-  debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
-  matrix_scan_quantum();
-
-  return 1;
-}
-
-bool matrix_is_modified(void)  // deprecated and evidently not called.
-{
-  return true;
-}
-
-inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); }
-
-inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; }
-
-void matrix_print(void) {
-  print("\nr/c 0123456789ABCDEF\n");
-  for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-    phex(row);
-    print(": ");
-    pbin_reverse16(matrix_get_row(row));
-    print("\n");
-  }
-}
-
-uint8_t matrix_key_count(void) {
-  uint8_t count = 0;
-  for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-    count += bitpop16(matrix[i]);
-  }
-  return count;
+    return changed;
 }
 
 /* Column pin configuration
@@ -193,42 +124,43 @@ uint8_t matrix_key_count(void) {
  * pin: B5  B4  B3  B2  B1  B0
  */
 static void init_cols(void) {
-  // init on mcp23018
-  // not needed, already done as part of init_mcp23018()
+    // init on mcp23018
+    // not needed, already done as part of init_mcp23018()
 
-  // init on teensy
-  // Input with pull-up(DDR:0, PORT:1)
-  DDRF &= ~(1 << 7 | 1 << 6 | 1 << 5 | 1 << 4 | 1 << 1 | 1 << 0);
-  PORTF |= (1 << 7 | 1 << 6 | 1 << 5 | 1 << 4 | 1 << 1 | 1 << 0);
+    // init on teensy
+    setPinInputHigh(F0);
+    setPinInputHigh(F1);
+    setPinInputHigh(F4);
+    setPinInputHigh(F5);
+    setPinInputHigh(F6);
+    setPinInputHigh(F7);
 }
 
 static matrix_row_t read_cols(uint8_t row) {
-  if (row < 7) {
-    if (mcp23018_status) {  // if there was an error
-      return 0;
+    if (row < 7) {
+        if (mcp23018_status) {  // if there was an error
+            return 0;
+        } else {
+            uint8_t data = 0;
+            // reading GPIOB (column port) since in mcp23018's sequential mode
+            // it is addressed directly after writing to GPIOA in select_row()
+            mcp23018_status = i2c_start(I2C_ADDR_READ, ERGODOX_EZ_I2C_TIMEOUT);    if (mcp23018_status) goto out;
+            mcp23018_status = i2c_read_nack(ERGODOX_EZ_I2C_TIMEOUT);               if (mcp23018_status < 0) goto out;
+            data            = ~((uint8_t)mcp23018_status);
+            mcp23018_status = I2C_STATUS_SUCCESS;
+        out:
+            i2c_stop();
+            return data;
+        }
     } else {
-      uint8_t data    = 0;
-      // reading GPIOB (column port) since in mcp23018's sequential mode
-      // it is addressed directly after writing to GPIOA in select_row()
-      mcp23018_status = i2c_start(I2C_ADDR_READ, ERGODOX_EZ_I2C_TIMEOUT);
-      if (mcp23018_status) goto out;
-      mcp23018_status = i2c_read_nack(ERGODOX_EZ_I2C_TIMEOUT);
-      if (mcp23018_status < 0) goto out;
-      data            = ~((uint8_t)mcp23018_status);
-      mcp23018_status = I2C_STATUS_SUCCESS;
-    out:
-      i2c_stop();
-      return data;
-    }
-  } else {
-    /* read from teensy
-     * bitmask is 0b11110011, but we want those all
-     * in the lower six bits.
-     * we'll return 1s for the top two, but that's harmless.
-     */
+        /* read from teensy
+         * bitmask is 0b11110011, but we want those all
+         * in the lower six bits.
+         * we'll return 1s for the top two, but that's harmless.
+         */
 
-    return ~((PINF & 0x03) | ((PINF & 0xF0) >> 2));
-  }
+        return ~((PINF & 0x03) | ((PINF & 0xF0) >> 2));
+    }
 }
 
 /* Row pin configuration
@@ -242,69 +174,64 @@ static matrix_row_t read_cols(uint8_t row) {
  * pin: A0  A1  A2  A3  A4  A5  A6
  */
 static void unselect_rows(void) {
-  // no need to unselect on mcp23018, because the select step sets all
-  // the other row bits high, and it's not changing to a different
-  // direction
+    // no need to unselect on mcp23018, because the select step sets all
+    // the other row bits high, and it's not changing to a different
+    // direction
 
-  // unselect on teensy
-  // Hi-Z(DDR:0, PORT:0) to unselect
-  DDRB &= ~(1 << 0 | 1 << 1 | 1 << 2 | 1 << 3);
-  PORTB &= ~(1 << 0 | 1 << 1 | 1 << 2 | 1 << 3);
-  DDRD &= ~(1 << 2 | 1 << 3);
-  PORTD &= ~(1 << 2 | 1 << 3);
-  DDRC &= ~(1 << 6);
-  PORTC &= ~(1 << 6);
+    // unselect on teensy
+    setPinInput(B0);
+    setPinInput(B1);
+    setPinInput(B2);
+    setPinInput(B3);
+    setPinInput(D2);
+    setPinInput(D3);
+    setPinInput(C6);
 }
 
 static void select_row(uint8_t row) {
-  if (row < 7) {
-    // select on mcp23018
-    if (mcp23018_status) {  // if there was an error
-                            // do nothing
+    if (row < 7) {
+        // select on mcp23018
+        if (!mcp23018_status) {
+            // set active row low  : 0
+            // set other rows hi-Z : 1
+            mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
+            mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT);                 if (mcp23018_status) goto out;
+            mcp23018_status = i2c_write(0xFF & ~(1 << row), ERGODOX_EZ_I2C_TIMEOUT);    if (mcp23018_status) goto out;
+        out:
+            i2c_stop();
+        }
     } else {
-      // set active row low  : 0
-      // set other rows hi-Z : 1
-      mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);
-      if (mcp23018_status) goto out;
-      mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT);
-      if (mcp23018_status) goto out;
-      mcp23018_status = i2c_write(0xFF & ~(1 << row), ERGODOX_EZ_I2C_TIMEOUT);
-      if (mcp23018_status) goto out;
-    out:
-      i2c_stop();
+        // select on teensy
+        // Output low(DDR:1, PORT:0) to select
+        switch (row) {
+            case 7:
+                setPinOutput(B0);
+                writePinLow(B0);
+                break;
+            case 8:
+                setPinOutput(B1);
+                writePinLow(B1);
+                break;
+            case 9:
+                setPinOutput(B2);
+                writePinLow(B2);
+                break;
+            case 10:
+                setPinOutput(B3);
+                writePinLow(B3);
+                break;
+            case 11:
+                setPinOutput(D2);
+                writePinLow(D2);
+                break;
+            case 12:
+                setPinOutput(D3);
+                writePinLow(D3);
+                break;
+            case 13:
+                setPinOutput(C6);
+                writePinLow(C6);
+                break;
+        }
     }
-  } else {
-    // select on teensy
-    // Output low(DDR:1, PORT:0) to select
-    switch (row) {
-      case 7:
-        DDRB |= (1 << 0);
-        PORTB &= ~(1 << 0);
-        break;
-      case 8:
-        DDRB |= (1 << 1);
-        PORTB &= ~(1 << 1);
-        break;
-      case 9:
-        DDRB |= (1 << 2);
-        PORTB &= ~(1 << 2);
-        break;
-      case 10:
-        DDRB |= (1 << 3);
-        PORTB &= ~(1 << 3);
-        break;
-      case 11:
-        DDRD |= (1 << 2);
-        PORTD &= ~(1 << 2);
-        break;
-      case 12:
-        DDRD |= (1 << 3);
-        PORTD &= ~(1 << 3);
-        break;
-      case 13:
-        DDRC |= (1 << 6);
-        PORTC &= ~(1 << 6);
-        break;
-    }
-  }
 }

keyboards/ergodox_ez/rules.mk

@@ -19,20 +19,20 @@ BOOTLOADER = halfkay
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration
-MOUSEKEY_ENABLE  = yes # Mouse keys
-EXTRAKEY_ENABLE  = yes # Audio control and System control
-CONSOLE_ENABLE   = no  # Console for debug
-COMMAND_ENABLE   = yes # Commands for debug and configuration
-CUSTOM_MATRIX    = yes # Custom matrix file for the ErgoDox EZ
-NKRO_ENABLE      = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-UNICODE_ENABLE   = yes # Unicode
-SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
+BOOTMAGIC_ENABLE = no   # Virtual DIP switch configuration
+MOUSEKEY_ENABLE  = yes  # Mouse keys
+EXTRAKEY_ENABLE  = yes  # Audio control and System control
+CONSOLE_ENABLE   = no   # Console for debug
+COMMAND_ENABLE   = yes  # Commands for debug and configuration
+CUSTOM_MATRIX    = lite # Custom matrix file for the ErgoDox EZ
+NKRO_ENABLE      = yes  # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+UNICODE_ENABLE   = yes  # Unicode
+SWAP_HANDS_ENABLE= yes  # Allow swapping hands of keyboard
 SLEEP_LED_ENABLE = no
 API_SYSEX_ENABLE = no
 RGBLIGHT_ENABLE = yes
 
-RGB_MATRIX_ENABLE = no # enable later
+RGB_MATRIX_ENABLE = no  # enable later
 DEBOUNCE_TYPE = eager_pr
 
 # project specific files

keyboards/flehrad/bigswitch/keymaps/333fred/config.h

@@ -1,19 +1,25 @@
 /*
-Copyright 2018 Fredric Silberberg (333fred)
+  Copyright (c) 2020 Fred Silberberg
 
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
+  Permission is hereby granted, free of charge, to any person obtaining a copy
+  of this software and associated documentation files (the "Software"), to deal
+  in the Software without restriction, including without limitation the rights
+  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+  copies of the Software, and to permit persons to whom the Software is
+  furnished to do so, subject to the following conditions:
 
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
+  The above copyright notice and this permission notice shall be included in all
+  copies or substantial portions of the Software.
 
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+  THE SOFTWARE.
 */
+
 #pragma once
 
 // Long tapping term on the big switch, because it takes so long to press

keyboards/flehrad/bigswitch/keymaps/333fred/keymap.c

@@ -1,3 +1,25 @@
+/*
+  Copyright (c) 2020 Fred Silberberg
+
+  Permission is hereby granted, free of charge, to any person obtaining a copy
+  of this software and associated documentation files (the "Software"), to deal
+  in the Software without restriction, including without limitation the rights
+  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+  copies of the Software, and to permit persons to whom the Software is
+  furnished to do so, subject to the following conditions:
+
+  The above copyright notice and this permission notice shall be included in all
+  copies or substantial portions of the Software.
+
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+  THE SOFTWARE.
+*/
+
 #include QMK_KEYBOARD_H
 
 typedef enum {

keyboards/gingham/keymaps/via/keymap.c

@@ -30,7 +30,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     KC_TRNS,  KC_TRNS,  KC_UP,    KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  RESET  ,
     KC_TRNS,  KC_LEFT,  KC_DOWN,  KC_RGHT,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
     KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,
-    KC_TRNS,  KC_TRNS,  KC_TRNS,                                KC_TRNS,                                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS),
+    KC_VOLU,  KC_VOLD,  KC_MUTE,                                KC_TRNS,                                KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS),
 
 [2] = LAYOUT_60_iso_split_bs_rshift( /* Empty for dynamic keymaps */
     KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS,

keyboards/gingham/keymaps/via/readme.md

@@ -1,3 +1 @@
 # Compile with this keymap to use VIA
-
-Sadly right now when using VIA, extrakeys is disabled. This means volume control will not work.

keyboards/gingham/keymaps/via/rules.mk

@@ -1,3 +1 @@
 VIA_ENABLE = yes
-MOUSEKEY_ENABLE = no
-EXTRAKEY_ENABLE = no

keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/config.h

@@ -1,3 +1,25 @@
+/*
+  Copyright (c) 2020 Fred Silberberg
+
+  Permission is hereby granted, free of charge, to any person obtaining a copy
+  of this software and associated documentation files (the "Software"), to deal
+  in the Software without restriction, including without limitation the rights
+  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+  copies of the Software, and to permit persons to whom the Software is
+  furnished to do so, subject to the following conditions:
+
+  The above copyright notice and this permission notice shall be included in all
+  copies or substantial portions of the Software.
+
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+  THE SOFTWARE.
+*/
+
 #pragma once
 
 #define USE_SERIAL

keyboards/handwired/dactyl_manuform/5x6/keymaps/333fred/keymap.c

@@ -1,3 +1,25 @@
+/*
+  Copyright (c) 2020 Fred Silberberg
+
+  Permission is hereby granted, free of charge, to any person obtaining a copy
+  of this software and associated documentation files (the "Software"), to deal
+  in the Software without restriction, including without limitation the rights
+  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+  copies of the Software, and to permit persons to whom the Software is
+  furnished to do so, subject to the following conditions:
+
+  The above copyright notice and this permission notice shall be included in all
+  copies or substantial portions of the Software.
+
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+  THE SOFTWARE.
+*/
+
 #include QMK_KEYBOARD_H
 #include "333fred.h"
 

keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/config.h

@@ -0,0 +1,40 @@
+/*
+  Copyright (c) 2020 Fred Silberberg
+
+  Permission is hereby granted, free of charge, to any person obtaining a copy
+  of this software and associated documentation files (the "Software"), to deal
+  in the Software without restriction, including without limitation the rights
+  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+  copies of the Software, and to permit persons to whom the Software is
+  furnished to do so, subject to the following conditions:
+
+  The above copyright notice and this permission notice shall be included in all
+  copies or substantial portions of the Software.
+
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+  THE SOFTWARE.
+*/
+
+#pragma once
+
+#define USE_SERIAL
+#define EE_HANDS
+
+#undef TAPPING_TERM
+#define TAPPING_TERM 200
+
+#define OLED_DISPLAY_128X64
+
+#define ENCODERS_PAD_A { F4 }
+#define ENCODERS_PAD_B { F5 }
+
+#undef SOFT_SERIAL_PIN
+#define SOFT_SERIAL_PIN D2
+
+#undef OLED_TIMEOUT
+#define OLED_TIMEOUT 240000

keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/keymap.c

@@ -0,0 +1,579 @@
+/*
+  Copyright (c) 2020 Fred Silberberg
+
+  Permission is hereby granted, free of charge, to any person obtaining a copy
+  of this software and associated documentation files (the "Software"), to deal
+  in the Software without restriction, including without limitation the rights
+  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+  copies of the Software, and to permit persons to whom the Software is
+  furnished to do so, subject to the following conditions:
+
+  The above copyright notice and this permission notice shall be included in all
+  copies or substantial portions of the Software.
+
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+  THE SOFTWARE.
+*/
+
+#include QMK_KEYBOARD_H
+#include "333fred.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [BASE] = LAYOUT_5x6_5(
+     KC_GRV,        KC_1,        KC_2,  KC_3,  KC_4,    KC_5,                                                           KC_6,   KC_7,     KC_8,         KC_9,   KC_0,           KC_MINS,
+     KC_TAB,        KC_Q,        KC_W,  KC_E,  KC_R,    KC_T,                                                           KC_Y,   KC_U,     KC_I,         KC_O,   KC_P,           KC_BSLS,
+     KC_ESC,        KC_A,        KC_S,  KC_D,  KC_F,    KC_G,                                                           KC_H,   KC_J,     KC_K,         KC_L,   KC_SCLN,        KC_QUOT,
+     OSM(MOD_LSFT), CTL_T(KC_Z), KC_X,  KC_C,  KC_V,    KC_B,                                                           KC_N,   KC_M,     KC_COMM,      KC_DOT, CTL_T(KC_SLSH), OSM(MOD_RSFT),
+                                 KC_F4,        KC_LALT, KC_BSPC, TD(TD_SYM_VIM), KC_DEL,               KC_UP,   KC_ENT, KC_SPC, OSL(VIM),               KC_EQL,
+                                                                 KC_LGUI,        TD(TD_COPY_PASTE),    KC_DOWN, OSM(MOD_RCTL)
+  ),
+
+  [SYMB] = LAYOUT_5x6_5(
+     _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,                                          KC_F6,   KC_F7,   KC_F8,    KC_F9,  KC_F10,  KC_F11,
+     _______, KC_EXLM, KC_AT,   KC_LPRN, KC_RPRN, KC_PIPE,                                        _______, KC_7,    KC_8,     KC_9,   _______, KC_F12,
+     _______, KC_HASH, KC_DLR,  KC_LCBR, KC_RCBR, KC_GRV,                                         _______, KC_4,    KC_5,     KC_6,   _______, _______,
+     _______, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TILD,                                        _______, KC_1,    KC_2,     KC_3,   _______, _______,
+                       KC_F7,            _______, _______, _______, _______,    KC_VOLU, KC_MPRV, KC_MPLY, KC_MNXT,  KC_ENT,
+                                                           _______, _______,    KC_VOLD, _______
+  ),
+
+  [VIM] = LAYOUT_5x6_5(
+     _______, RESET,   _______, _______, _______, _______,                                         _______, _______, _______, _______, RESET,   _______,
+     _______, _______, _______, _______, KC_LSFT, _______,                                         _______, _______, _______, _______, _______, _______,
+     _______, DLEFT,   DRIGHT,  KC_LCTL, KC_LGUI, _______,                                         KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______,
+     _______, _______, _______, _______, _______, _______,                                         _______, _______, _______, _______, _______, _______,
+                       _______,          _______, _______,_______, _______,     TG(GAME), _______, _______, _______,          _______,
+                                                          _______, _______,     _______,  _______
+  ),
+
+  [GAME] = LAYOUT_5x6_5(
+     KC_ESC, KC_1,    KC_2,    KC_3,  KC_4,    KC_5,                                          KC_6,    KC_7,     KC_8,         KC_9,   KC_0,    KC_MINS,
+     KC_T,   KC_TAB,  KC_Q,    KC_W,  KC_E,    KC_R,                                          KC_Y,    KC_U,     KC_I,         KC_O,   KC_P,    KC_BSLS,
+     KC_G,   KC_LCTL, KC_A,    KC_S,  KC_D,    KC_F,                                          KC_H,    KC_J,     KC_K,         KC_L,   KC_SCLN, KC_QUOT,
+     KC_B,   KC_LSFT, KC_Z,    KC_X,  KC_C,    KC_V,                                          KC_N,    KC_M,     KC_COMM,      KC_DOT, KC_SLSH, KC_RSFT,
+                      KC_LOCK,        KC_LALT, KC_SPC, KC_ENT,  KC_GRV,    TG(GAME), _______, _______, _______,                KC_EQL,
+                                                       KC_BSPC, KC_F5,     KC_F6,    _______
+  ),
+};
+
+uint32_t quote_timer;
+
+void keyboard_post_init_user(void) { quote_timer = 0; }
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    tap_dance_process_keycode(keycode);
+    return !try_handle_macro(keycode, record);
+}
+
+static void render_logo(void) {
+    static const char PROGMEM qmk_logo[] = {0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00};
+
+    oled_write_P(qmk_logo, false);
+}
+
+void render_led_status(void) {
+    led_t led_state = host_keyboard_led_state();
+    if (led_state.num_lock || led_state.caps_lock || led_state.scroll_lock) {
+        oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR("    "), false);
+        oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR("    "), false);
+        oled_write_ln_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR("    "), false);
+    }
+}
+
+void render_mods_status(void) {
+    uint8_t mods = get_mods() | get_oneshot_mods();
+    bool    ctrl = mods & MOD_MASK_CTRL;
+    bool    shft = mods & MOD_MASK_SHIFT;
+    bool    alt  = mods & MOD_MASK_ALT;
+    bool    gui  = mods & MOD_MASK_GUI;
+
+    oled_write_P(ctrl ? PSTR("CTRL ") : PSTR("     "), false);
+    oled_write_P(shft ? PSTR("SHIFT ") : PSTR("      "), false);
+    oled_write_P(alt ? PSTR("ALT ") : PSTR("    "), false);
+    oled_write_ln_P(gui ? PSTR("GUI ") : PSTR("    "), false);
+}
+
+#define MAX_LINES 8
+
+void write_quote(const char* data, const uint8_t num_lines) {
+    uint8_t current_line = 0;
+    for (; current_line < (MAX_LINES - num_lines) / 2; current_line++) {
+        oled_advance_page(true);
+    }
+
+    oled_write_ln_P(data, false);
+
+    for (current_line += num_lines; current_line < MAX_LINES; current_line++)
+    {
+        oled_advance_page(true);
+    }
+}
+
+void oled_task_user(void) {
+    if (is_keyboard_master()) {
+        render_logo();
+        oled_advance_page(/* clearPageRemainder */ true);
+        oled_write_P(PSTR("Layer: "), false);
+        switch (get_highest_layer(layer_state)) {
+            case BASE:
+                oled_write_ln_P(PSTR("Base"), false);
+                break;
+            case SYMB:
+                oled_write_ln_P(PSTR("Symbols"), false);
+                break;
+            case VIM:
+                oled_write_ln_P(PSTR("Vim"), false);
+                break;
+            case GAME:
+                oled_write_ln_P(PSTR("Gaming"), false);
+                break;
+        }
+
+        render_mods_status();
+        render_led_status();
+    } else {
+        if ((quote_timer != 0 && timer_elapsed32(quote_timer) < 300000 /* 5 minutes */) || !is_oled_on()) {
+            return;
+        }
+
+        srand(timer_read32());
+        int currentQuote = rand() % 63;
+        quote_timer  = timer_read32();
+
+        // Max character count on my screen is 20 characters per line.
+        // Quotes are from various fantasy books, mostly either from
+        // The Stormlight Archive or from The Wheel of Time.
+        switch (currentQuote) {
+            case 0:
+                write_quote(PSTR("  Life before Death \n"
+                                 "  Strength before   \n"
+                                 "      Weakness      \n"
+                                 "   Journey before   \n"
+                                 "    Destination"),
+                            5);
+                break;
+            case 1:
+                write_quote(PSTR(" Honor is dead, but \n"
+                                 "I'll see what I can \n"
+                                 "        do."),
+                            3);
+                break;
+            case 2:
+                write_quote(PSTR(" You cannot have my \n"
+                                 "       pain!"),
+                            2);
+                break;
+            case 3:
+                write_quote(PSTR(" Pride doesn't win  \n"
+                                 "     battles"),
+                            2);
+                break;
+            case 4:
+                write_quote(PSTR("  I have practice   \n"
+                                 " following fools in \n"
+                                 "   their reckless   \n"
+                                 "      pursuits."),
+                            4);
+                break;
+            case 5:
+                write_quote(PSTR("  What is the most  \n"
+                                 "  important step a  \n"
+                                 "    man can take?"),
+                            3);
+                break;
+            case 6:
+                write_quote(PSTR(" It's the next one. \n"
+                                 "  Always the next   \n"
+                                 "   step, Dalinar."),
+                            3);
+                break;
+            case 7:
+                write_quote(PSTR("    NO MATING."), 1);
+                break;
+            case 8:
+                write_quote(PSTR("   Inappropriate?   \n"
+                                 "Such as... dividing \n"
+                                 "     by zero?"),
+                            3);
+                break;
+            case 9:
+                write_quote(PSTR("   I am a stick!"), 1);
+                break;
+            case 10:
+                write_quote(PSTR("  But you could be  \n"
+                                 "       fire!"),
+                            1);
+                break;
+            case 11:
+                write_quote(PSTR("    Sometimes a     \n"
+                                 "   hyprocrite is    \n"
+                                 " nothing more than  \n"
+                                 " than a man in the  \n"
+                                 "process of changing"),
+                            5);
+                break;
+            case 12:
+                write_quote(PSTR(" You surrender when \n"
+                                 " you are dead. Many \n"
+                                 "a man has been given\n"
+                                 "       less."),
+                            4);
+                break;
+            case 13:
+                write_quote(PSTR(" Kneel and swear to \n"
+                                 " the Lord Dragon,...\n"
+                                 "   or you will be   \n"
+                                 "      knelt."),
+                            4);
+                break;
+            case 14:
+                write_quote(PSTR("I'm right, anyway. I\n"
+                                 "wish I wasn't, but I\n"
+                                 "  am. I bloody am."),
+                            3);
+                break;
+            case 15:
+                write_quote(PSTR(" Death rides on my  \n"
+                                 "  shoulder,. Death  \n"
+                                 "    walks in my     \n"
+                                 "  footsteps. I am   \n"
+                                 "       death."),
+                            5);
+                break;
+            case 16:
+                write_quote(PSTR("  The Golden Crane  \n"
+                                 "  flies for Tarmon  \n"
+                                 "      Gai'don"),
+                            3);
+                break;
+            case 17:
+                write_quote(PSTR("You humans are very \n"
+                                 "     excitable"),
+                            2);
+                break;
+            case 18:
+                write_quote(PSTR("       Phaw!"), 1);
+                break;
+            case 19:
+                write_quote(PSTR("I may be a fool, but\n"
+                                 "  I intend to be a  \n"
+                                 "     live fool."),
+                            3);
+                break;
+            case 20:
+                write_quote(PSTR(" Anyone who claimed \n"
+                                 "  that old age had  \n"
+                                 "    brought them    \n"
+                                 "patience was either \n"
+                                 "  lying or senile."),
+                            5);
+                break;
+            case 21:
+                write_quote(PSTR("Death is light as a \n"
+                                 "feather; duty, heavy\n"
+                                 "   as a mountain"),
+                            3);
+                break;
+            case 22:
+                write_quote(PSTR("Dovie'andi se tovya \n"
+                                 "      sagain."),
+                            2);
+                break;
+            case 23:
+                write_quote(PSTR(" Carai an Caldazar! \n"
+                                 "Carai an Ellisande! \n"
+                                 "   Al Ellisande!"),
+                            3);
+                break;
+            case 24:
+                write_quote(PSTR("    Mia dovienya    \n"
+                                 "  nesodhin soende."),
+                            2);
+                break;
+            case 25:
+                write_quote(PSTR(" The Wheel of Time  \n"
+                                 "turns, and Ages come\n"
+                                 " and pass, leaving  \n"
+                                 "memories that become\n"
+                                 "      legend."),
+                            5);
+                break;
+            case 26:
+                write_quote(PSTR("  Legend fades to   \n"
+                                 "myth, and even myth \n"
+                                 " is long forgotten  \n"
+                                 " when the Age that  \n"
+                                 "gave it birth comes \n"
+                                 "       again."),
+                            6);
+                break;
+            case 27:
+                write_quote(PSTR(" What is too absurd \n"
+                                 "   to believe is    \n"
+                                 "believed because it \n"
+                                 "is too absurd to be \n"
+                                 "       a lie."),
+                            5);
+                break;
+            case 28:
+                write_quote(PSTR("And you gave me the \n"
+                                 "  way out! Chew on  \n"
+                                 "that bitterness for \n"
+                                 "lunch, you flaming, \n"
+                                 "burning, misbegotten\n"
+                                 "       liars!"),
+                            6);
+                break;
+            case 29:
+                write_quote(PSTR("  He was going to   \n"
+                                 "start having, 'I am \n"
+                                 "not a bloody Lord', \n"
+                                 " embroidered on his \n"
+                                 "       coats."),
+                            5);
+                break;
+            case 30:
+                write_quote(PSTR("All was not lost, of\n"
+                                 "  course. All was   \n"
+                                 " never lost as long \n"
+                                 " as you were alive."),
+                            4);
+                break;
+            case 31:
+                write_quote(PSTR(" Everything is just \n"
+                                 "    bloody fine!"),
+                            2);
+                break;
+            case 32:
+                write_quote(PSTR("The wheel weaves as \n"
+                                 "  the wheel wills"),
+                            2);
+                break;
+            case 33:
+                write_quote(PSTR("  Time to toss the  \n"
+                                 "        dice"),
+                            2);
+                break;
+            case 34:
+                write_quote(PSTR("Always plan for the \n"
+                                 " worst, child, that \n"
+                                 "    way all your    \n"
+                                 "   surprises are    \n"
+                                 "   pleasant ones."),
+                            5);
+                break;
+            case 35:
+                write_quote(PSTR("'Pessimism, she is a\n"
+                                 "   fond friend of   \n"
+                                 "yours, yes?' 'That's\n"
+                                 "  uncalled for. I   \n"
+                                 "  barely know her.  \n"
+                                 "Mere acquaintances, \n"
+                                 "     at best.'"),
+                            7);
+                break;
+            case 36:
+                write_quote(PSTR("   Do not trouble   \n"
+                                 "trouble till trouble\n"
+                                 "   troubles you."),
+                            3);
+                break;
+            case 37:
+                write_quote(PSTR("If your enemy offers\n"
+                                 "  you two targets,  \n"
+                                 " strike at a third."),
+                            3);
+                break;
+            case 38:
+                write_quote(PSTR("The wind was not the\n"
+                                 "beginning. There are\n"
+                                 " neither beginnings \n"
+                                 " nor endings to the \n"
+                                 "   turning of the   \n"
+                                 " Wheel of Time. But \n"
+                                 "     it was _a_     \n"
+                                 "     beginning."),
+                            8);
+                break;
+            case 39:
+                write_quote(PSTR("Bloody flaming ashes"), 1);
+                break;
+            case 40:
+                write_quote(PSTR("Then follow Lord Mat\n"
+                                 " whenever he calls  \n"
+                                 "To dance with Jak O'\n"
+                                 "    the Shadows."),
+                            4);
+                break;
+            case 41:
+                write_quote(PSTR("    There are no    \n"
+                                 " endings, and never \n"
+                                 "will be endings, to \n"
+                                 " the turning of the \n"
+                                 " Wheel of Time. But \n"
+                                 " it was an ending."),
+                            6);
+                break;
+            case 42:
+                write_quote(PSTR(" TAI'SHAR MALKIER!"), 1);
+                break;
+            case 43:
+                write_quote(PSTR("I would not mind you\n"
+                                 " in my head, if you \n"
+                                 "were not so clearly \n"
+                                 "        mad."),
+                            4);
+                break;
+            case 44:
+                write_quote(PSTR("  ILYENA, MY LOVE,  \n"
+                                 "    FORGIVE ME!"),
+                            2);
+                break;
+            case 45:
+                write_quote(PSTR(" Oh, Light. That's  \n"
+                                 "impossible! We can't\n"
+                                 "  use it! Cast it   \n"
+                                 "away! That is death \n"
+                                 " we hold, death and \n"
+                                 "betrayal. It is HIM."),
+                            6);
+                break;
+            case 46:
+                write_quote(PSTR("Nothing ever goes as\n"
+                                 " you expect. Expect \n"
+                                 "  nothing, and you  \n"
+                                 "    will not be     \n"
+                                 " surprised. Expect  \n"
+                                 " nothing. Hope for  \n"
+                                 " nothing. Nothing."),
+                            7);
+                break;
+            case 47:
+                write_quote(PSTR("  Distant Weeping"), 1);
+                break;
+            case 48:
+                write_quote(PSTR("Are you real? Am I?"), 1);
+                break;
+            case 49:
+                write_quote(PSTR("  I'm just an old   \n"
+                                 "gleeman, who could I\n"
+                                 "    possibly be     \n"
+                                 "   dangerous to?"),
+                            4);
+                break;
+            case 50:
+                write_quote(PSTR(" Mat bloody Cauthon \n"
+                                 " is no bloody hero!"),
+                            2);
+                break;
+            case 51:
+                write_quote(PSTR("You are a coward and\n"
+                                 " a tyrant. I'd name \n"
+                                 " you Darkfriend as  \n"
+                                 "well, but I suspect \n"
+                                 " that the Dark One  \n"
+                                 "  would perhaps be  \n"
+                                 "   embarrassed to   \n"
+                                 "associate with you."),
+                            8);
+                break;
+            case 52:
+                write_quote(PSTR(" I win again, Lews  \n"
+                                 "      Therin."),
+                            2);
+                break;
+            case 53:
+                write_quote(PSTR("May you always find \n"
+                                 "  water and shade."),
+                            2);
+                break;
+            case 54:
+                write_quote(PSTR(" I will never serve \n"
+                                 "you, Father of Lies.\n"
+                                 "In a thousand lives,\n"
+                                 "I never have. I know\n"
+                                 " that. I'm sure of  \n"
+                                 "it. Come. It is time\n"
+                                 "      to die."),
+                            7);
+                break;
+            case 55:
+                write_quote(PSTR(" There may be more  \n"
+                                 "than one way to skin\n"
+                                 " a cat, but the cat \n"
+                                 "isn't going to like \n"
+                                 "    any of them."),
+                            5);
+                break;
+            case 56:
+                write_quote(PSTR("Please see that they\n"
+                                 " know, although the \n"
+                                 "word Black may brand\n"
+                                 "my name forever, my \n"
+                                 "soul is Brown. Tell \n"
+                                 "      them..."),
+                            6);
+                break;
+            case 57:
+                write_quote(PSTR(" 'Your soul is of a \n"
+                                 "pure white, Verin,' \n"
+                                 "Egwene said softly. \n"
+                                 "  'Like the Light   \n"
+                                 "      itself.'"),
+                            5);
+                break;
+            case 58:
+                write_quote(PSTR("  Asha'man, Kill!"), 1);
+                break;
+            case 59:
+                write_quote(PSTR("  Let the lord of   \n"
+                                 "    chaos rule."),
+                            2);
+                break;
+            case 60:
+                write_quote(PSTR("   There's always   \n"
+                                 "  another secret."),
+                            2);
+                break;
+            case 61:
+                write_quote(PSTR(" You see the great  \n"
+                                 "thing about madness \n"
+                                 "is that it's all in \n"
+                                 "     your head."),
+                            4);
+                break;
+            case 62:
+                write_quote(PSTR(" In one Age, called \n"
+                                 "  the Third Age by  \n"
+                                 "some, an Age yet to \n"
+                                 " come, an Age long  \n"
+                                 " past, a wind rose  \n"
+                                 "      above..."),
+                            6);
+                break;
+        }
+    }
+}
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    // On the left, control the volume. On the right, scroll the page
+    if (index == 0) {
+        if (clockwise) {
+            tap_code(KC_WH_U);
+        } else {
+            tap_code(KC_WH_D);
+        }
+    } else {
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+    }
+}

keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/rules.mk

@@ -0,0 +1,4 @@
+KEY_LOCK_ENABLE = yes
+CONSOLE_ENABLE = no
+OLED_DRIVER_ENABLE = yes
+ENCODER_ENABLE = yes

keyboards/handwired/leftynumpad/config.h

@@ -0,0 +1,102 @@
+/*
+Copyright 2020 Tom Swartz
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xBEEF
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Tom Swartz
+#define PRODUCT LeftyNumpad
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 5
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7 }
+#define MATRIX_COL_PINS { E6, B4, B5, B6, B2 }
+#define UNUSED_PINS {D3, D2, B0, D5, B3, B1, F7, F6, F5, F4 }
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 10
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION

keyboards/handwired/leftynumpad/info.json

@@ -0,0 +1,36 @@
+{
+    "keyboard_name": "LeftyNumpad",
+    "url": "https://github.com/tomswartz07",
+    "maintainer": "Tom Swartz",
+    "width": 5,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                    {"label":"0,0", "x":0, "y":0},
+                    {"label":"1,0", "x":1, "y":0},
+                    {"label":"2,0", "x":2, "y":0},
+                    {"label":"3,0", "x":3, "y":0},
+                    {"label":"4,0", "x":4, "y":0},
+                    {"label":"0,1", "x":0, "y":1},
+                    {"label":"1,1", "x":1, "y":1},
+                    {"label":"2,1", "x":2, "y":1},
+                    {"label":"3,1", "x":3, "y":1},
+                    {"label":"0,2", "x":0, "y":2},
+                    {"label":"1,2", "x":1, "y":2},
+                    {"label":"2,2", "x":2, "y":2},
+                    {"label":"3,2", "x":3, "y":2},
+                    {"label":"5,1", "x":4, "y":1, "h":2},
+                    {"label":"0,3", "x":0, "y":3},
+                    {"label":"1,3", "x":1, "y":3},
+                    {"label":"2,3", "x":2, "y":3},
+                    {"label":"3,3", "x":3, "y":3},
+                    {"label":"0,4", "x":0, "y":4},
+                    {"label":"1,4", "x":1, "y":4},
+                    {"label":"2,4", "x":2, "y":4},
+                    {"label":"3,4", "x":3, "y":4},
+                    {"label":"4,3", "x":4, "y":3, "h":2}
+            ]
+        }
+    }
+}

keyboards/handwired/leftynumpad/keymaps/default/keymap.c

@@ -0,0 +1,92 @@
+/* Copyright 2020 Tom Swartz
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _NP,
+    _FN
+};
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+    KC_00 = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* NumberPad Layer
+    ,---------------------------------------.
+    | Back  | Num   | /     | *     | -     |
+    | Space | Lock  |       |       |       |
+    |-------+-------+-------+-------+-------|
+    | Tab   | 7     | 8     | 9     | +     |
+    |       | Home  | Up    | PgUp  |       |
+    |-------+-------+-------+-------|       |
+    | Layer | 4     | 5     | 6     |       |
+    | Toggle| Left  |       | Right |       |
+    |-------+-------+-------+-------+-------|
+    | Page  | 1     | 2     | 3     | Enter |
+    | Up    | End   | Down  | PgDn  |       |
+    |-------+-------+-------+-------|       |
+    | Page  | 00    | 0     | .     |       |
+    | Down  |       |       |       |       |
+    `---------------------------------------'
+*/
+    [_NP] = LAYOUT(
+        KC_BSPC,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,    KC_7,    KC_8,   KC_9,
+        TG(_NP),   KC_4,    KC_5,   KC_6,    KC_PPLS,
+        KC_PGUP,   KC_1,    KC_2,   KC_3,
+        KC_PGDOWN, KC_00,   KC_0,   KC_PDOT, KC_PENT
+    ),
+/* Macropad/Function Layer
+    ,---------------------------------------.
+    | `~    | Play  | F13   | Prev  | Next  |
+    |       | Pause |       |       |       |
+    |-------+-------+-------+-------+-------|
+    | Tab   | F14   | F15   | 9     | +     |
+    |       |       |       | PgUp  |       |
+    |-------+-------+-------+-------|       |
+    | Layer | 4     | 5     | 6     |       |
+    | Toggle| Left  |       | Right |       |
+    |-------+-------+-------+-------+-------|
+    | U     | B     | 2     | 3     | Enter |
+    |       |       | Down  | PgDn  |       |
+    |-------+-------+-------+-------|       |
+    | D     | F     | 0     | .     |       |
+    |       |       |       |       |       |
+    `---------------------------------------'
+*/
+    [_FN] = LAYOUT(
+        KC_GRV,  KC_MPLY, KC_F13,  KC_MPRV, KC_MNXT,
+        _______, KC_F14,  KC_F15,  _______,
+        _______, _______, _______, _______, _______,
+        KC_U,    KC_B,    _______, _______,
+        KC_D,    KC_F,    _______, _______, _______
+    ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case KC_00:
+            if (record->event.pressed) {
+                // when keycode DOUBLEZERO is pressed
+                SEND_STRING("00");
+            }
+            break;
+    }
+    return true;
+}

keyboards/handwired/leftynumpad/keymaps/default/readme.md

@@ -0,0 +1,21 @@
+# The default keymap for LeftyNumpad
+
+## Base Layer
+```
+    ,---------------------------------------.
+    | Back  | Num   | /     | *     | -     |
+    | Space | Lock  |       |       |       |
+    |-------+-------+-------+-------+-------|
+    | Layer | 7     | 8     | 9     | +     |
+    | Up    | Home  | Up    | PgUp  |       |
+    |-------+-------+-------+-------|       |
+    | Layer | 4     | 5     | 6     |       |
+    | Down  | Left  |       | Right |       |
+    |-------+-------+-------+-------+-------|
+    | Page  | 1     | 2     | 3     | Enter |
+    | Up    | End   | Down  | PgDn  |       |
+    |-------+-------+-------+-------|       |
+    | Page  | 00    | 0     | .     |       |
+    | Down  |       |       |       |       |
+    `---------------------------------------'
+```

keyboards/handwired/leftynumpad/leftynumpad.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 Tom Swartz
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "leftynumpad.h"

keyboards/handwired/leftynumpad/leftynumpad.h

@@ -0,0 +1,42 @@
+/* Copyright 2020 Tom Swartz
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+   K05,  K15,  K25,  K35,  K45,  \
+   K04,  K14,  K24,  K34,        \
+   K03,  K13,  K23,  K33,  K43,  \
+   K02,  K12,  K22,  K32,        \
+   K01,  K11,  K21,  K31,  K41   \
+) \
+{ \
+ { K05,  K15,  K25,  K35,  K45 }, \
+ { K04,  K14,  K24,  K34       }, \
+ { K03,  K13,  K23,  K33,  K43 }, \
+ { K02,  K12,  K22,  K32       }, \
+ { K01,  K11,  K21,  K31,  K41 }  \
+}

keyboards/handwired/leftynumpad/readme.md

@@ -0,0 +1,16 @@
+# LeftyNumpad
+
+![Image of LeftyNumpad](https://i.imgur.com/kkSPIxpl.png)
+
+A small numberpad/macropad intended to be placed southpaw-style on the left
+side of a keyboard.
+
+* Keyboard Maintainer: [Tom Swartz](https://github.com/tomswartz07)
+* Hardware Supported: Handwired, Uses Arudino Micro.
+* Hardware Availability: Handwired hardware.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/leftynumpad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/handwired/leftynumpad/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output

keyboards/handwired/onekey/keymaps/oled/keymap.c

@@ -0,0 +1,452 @@
+/* Copyright 2020 Sergey Vlasov <sigprof@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum tap_dances {
+    TD_OLED,
+};
+
+enum oled_test_modes {
+    // Modes between TEST_FIRST and TEST_LAST (inclusive) can be switched with a keypress.
+    TEST_FIRST,
+    TEST_LOGO = TEST_FIRST,
+    TEST_CHARACTERS,
+    TEST_SLOW_UPDATE,
+    TEST_ALL_ON,
+    TEST_FRAME,
+    TEST_ALL_OFF,
+    TEST_FILL_HORZ_0,
+    TEST_FILL_HORZ_1,
+    TEST_FILL_VERT_0,
+    TEST_FILL_VERT_1,
+    TEST_FILL_CHECKERBOARD_1,
+    TEST_FILL_CHECKERBOARD_2,
+    TEST_FILL_CHECKERBOARD_4,
+    TEST_LAST = TEST_FILL_CHECKERBOARD_4,
+
+    // Special modes which are not reachable normally.
+    TEST_DRAW_ALWAYS_ON,
+    TEST_DRAW_ALWAYS_OFF,
+};
+
+static enum oled_test_modes test_mode = TEST_FIRST;
+
+static oled_rotation_t rotation = OLED_ROTATION_0;
+
+static bool     scrolling;
+static uint8_t  scrolling_speed;
+static bool     need_update = true;
+static bool     draw_always;
+static bool     update_speed_test;
+static uint32_t update_speed_start_timer;
+static uint16_t update_speed_count;
+static bool     restart_test;
+
+static void stop_scrolling(void) {
+    if (scrolling) {
+        oled_scroll_off();
+        scrolling = false;
+    }
+}
+
+static void dance_oled_finished(qk_tap_dance_state_t *state, void *user_data) {
+    switch (state->count) {
+        case 1:
+            if (state->pressed) {
+                // single hold - step through rotations
+                switch (rotation) {
+                    case OLED_ROTATION_0:
+                        rotation = OLED_ROTATION_90;
+                        break;
+                    case OLED_ROTATION_90:
+                        rotation = OLED_ROTATION_180;
+                        break;
+                    case OLED_ROTATION_180:
+                        rotation = OLED_ROTATION_270;
+                        break;
+                    default:
+                        rotation = OLED_ROTATION_0;
+                        break;
+                }
+                stop_scrolling();
+                oled_init(rotation);
+            } else {
+                // single tap - step through test modes
+                if (test_mode < TEST_LAST) {
+                    ++test_mode;
+                } else {
+                    test_mode = TEST_FIRST;
+                }
+                stop_scrolling();
+                oled_clear();
+            }
+            restart_test = true;
+            need_update  = true;
+            break;
+
+        case 2:
+            if (state->pressed) {
+                // tap + hold - change scrolling speed
+                scrolling_speed = (scrolling_speed + 1) % 8;
+                stop_scrolling();
+                oled_scroll_set_speed(scrolling_speed);
+                // Cannot reactivate scrolling here, because oled_scroll_off()
+                // marks the whole display as dirty, and oled_scroll_left()
+                // silently does nothing if either the display is dirty or
+                // scrolling is already active.
+            } else {
+                // double tap - toggle scrolling
+                if (!scrolling) {
+                    scrolling = true;
+                    oled_scroll_left();
+                } else {
+                    scrolling = false;
+                    oled_scroll_off();
+                }
+            }
+            need_update = true;
+            break;
+
+        case 3:
+            if (state->pressed) {
+                // double tap + hold - toggle `draw_always`
+                draw_always = !draw_always;
+                if (draw_always) {
+                    test_mode = TEST_DRAW_ALWAYS_ON;
+                } else {
+                    test_mode = TEST_DRAW_ALWAYS_OFF;
+                }
+                stop_scrolling();
+                oled_clear();
+                restart_test = true;
+                need_update  = true;
+            } else {
+                // triple tap - toggle update speed test
+                update_speed_test = !update_speed_test;
+                if (update_speed_test) {
+                    stop_scrolling();
+                    update_speed_start_timer = timer_read32();
+                    update_speed_count       = 0;
+                }
+            }
+            break;
+        default:
+            break;
+    }
+}
+
+qk_tap_dance_action_t tap_dance_actions[] = {[TD_OLED] = ACTION_TAP_DANCE_FN(dance_oled_finished)};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {LAYOUT_ortho_1x1(TD(TD_OLED))};
+
+// `bool oled_is_dirty(void)` does not exist at the moment
+extern OLED_BLOCK_TYPE oled_dirty;
+
+static inline uint8_t pixel_width(void) {
+    if (!(rotation & OLED_ROTATION_90)) {
+        return OLED_DISPLAY_WIDTH;
+    }
+    return OLED_DISPLAY_HEIGHT;
+}
+
+static inline uint8_t pixel_height(void) {
+    if (!(rotation & OLED_ROTATION_90)) {
+        return OLED_DISPLAY_HEIGHT;
+    }
+    return OLED_DISPLAY_WIDTH;
+}
+
+// Draw the QMK logo at the top left corner, clipping if it does not fit.
+static void test_logo(void) {
+    uint8_t lines = oled_max_lines();
+    if (lines > 3) {
+        lines = 3;
+    }
+    uint8_t chars = oled_max_chars();
+    if (chars > 21) {
+        chars = 21;
+    }
+    for (uint8_t row = 0; row < lines; ++row) {
+        oled_set_cursor(0, row);
+        for (uint8_t col = 0; col < chars; ++col) {
+            oled_write_char(0x80 + 0x20 * row + col, false);
+        }
+    }
+}
+
+static const PROGMEM char fill_ff[OLED_MATRIX_SIZE] = {[0 ... OLED_MATRIX_SIZE - 1] = 0xff};
+
+// Fill the whole screen with a pattern made from two bytes alternating after the specified number of repeats.
+static void test_fill(uint8_t byte0, uint8_t byte1, uint8_t repeats) {
+    uint8_t  width = pixel_width();
+    uint8_t  lines = oled_max_lines();
+    uint16_t index = 0;
+    for (uint8_t row = 0; row < lines; ++row) {
+        for (uint8_t col = 0; col < width; ++col) {
+            uint8_t byte = ((col / repeats) % 2) ? byte1 : byte0;
+            oled_write_raw_byte(byte, index++);
+        }
+    }
+}
+
+// Draw a frame at the edges of the OLED screen.
+static void test_frame(void) {
+    uint8_t width  = pixel_width();
+    uint8_t height = pixel_height();
+    for (uint8_t x = 0; x < width; ++x) {
+        oled_write_pixel(x, 0, true);
+        oled_write_pixel(x, height - 1, true);
+    }
+    for (uint8_t y = 1; y < height - 1; ++y) {
+        oled_write_pixel(0, y, true);
+        oled_write_pixel(width - 1, y, true);
+    }
+}
+
+// Use all 94 visible ASCII characters for testing.
+#define TEST_CHAR_COUNT ('~' - '!' + 1)
+
+static char get_test_char(uint8_t char_index) { return char_index + '!'; }
+
+// Fill the whole screen with distinct characters (if the display is large enough to show more than 94 characters
+// at once, the sequence is repeated the second time with inverted characters).
+static void test_characters(void) {
+    uint8_t cols       = oled_max_chars();
+    uint8_t rows       = oled_max_lines();
+    bool    invert     = false;
+    uint8_t char_index = 0;
+    for (uint8_t row = 0; row < rows; ++row) {
+        for (uint8_t col = 0; col < cols; ++col) {
+            oled_write_char(get_test_char(char_index), invert);
+            if (++char_index >= TEST_CHAR_COUNT) {
+                char_index = 0;
+                invert     = !invert;
+            }
+        }
+    }
+}
+
+// Test screen updating after drawing a single character or pixel.
+void test_slow_update(void) {
+    static uint8_t  phase, x, y, char_index, first_char;
+    static uint16_t timer;
+    static uint16_t delay = 500;
+
+    if (restart_test) {
+        // Initialize all state variables before starting the test.
+        restart_test = false;
+        phase        = 0;
+        x            = 0;
+        y            = 0;
+        char_index   = 0;
+        first_char   = 0;
+        delay        = 500;
+    } else {
+        // Wait for the specified time between steps.
+        if (timer_elapsed(timer) < delay) {
+            return;
+        }
+    }
+
+    timer = timer_read();
+    switch (phase) {
+        case 0:
+            // Phase 0: fill the whole screen with mostly distinct characters, one character at a time.  Here the
+            // inversion trick is not used, so that the frame which is drawn in subsequent phases would not be
+            // overlapped by the inverted character background.
+            oled_set_cursor(x, y);
+            oled_write_char(get_test_char(char_index), false);
+            if (++char_index >= TEST_CHAR_COUNT) {
+                char_index = 0;
+            }
+            if (++x >= oled_max_chars()) {
+                x = 0;
+                if (++y >= oled_max_lines()) {
+                    // The whole screen was filled - start the next phase.
+                    ++phase;
+                    x = y = 0;
+                }
+            }
+            delay = 250;
+            break;
+
+        case 1:
+            // Phase 1: draw a line along the left edge of the screen, one pixel at a time.
+            oled_write_pixel(x, y, true);
+            if (y < pixel_height() - 1) {
+                ++y;
+            } else {
+                // The bottom left corner is reached - start the next phase.
+                ++phase;
+                ++x;
+            }
+            delay = 50;
+            break;
+
+        case 2:
+            // Phase 2: draw a line along the bottom edge of the screen, one pixel at a time.
+            oled_write_pixel(x, y, true);
+            if (x < pixel_width() - 1) {
+                ++x;
+            } else {
+                // The bottom right corner was reached - start the next phase.
+                ++phase;
+                --y;
+            }
+            delay = 50;
+            break;
+
+        case 3:
+            // Phase 3: draw a line along the right edge of the screen, one pixel at a time.
+            oled_write_pixel(x, y, true);
+            if (y > 0) {
+                --y;
+            } else {
+                // The top right corner was reached - start the next phase.
+                ++phase;
+                --x;
+            }
+            delay = 50;
+            break;
+
+        case 4:
+            // Phase 4: draw a line along the top edge of the screen, one pixel at a time.
+            oled_write_pixel(x, y, true);
+            if (x > 0) {
+                --x;
+            } else {
+                // The top left corner was reached - start the next phase.
+                ++phase;
+            }
+            delay = 50;
+            break;
+
+        default:
+            // Restart from phase 0, but change the first character of the sequence to make screen updates visible.
+            if (++first_char >= TEST_CHAR_COUNT) {
+                first_char = 0;
+            }
+            phase      = 0;
+            x          = 0;
+            y          = 0;
+            char_index = first_char;
+            delay      = 500;
+            break;
+    }
+}
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    oled_scroll_set_area(0, 0);
+    oled_scroll_set_speed(scrolling_speed);
+    return rotation;
+}
+
+void oled_task_user(void) {
+    if (update_speed_test) {
+        // Speed test mode - wait for screen update completion.
+        if (!oled_dirty) {
+            // Update statistics and send the measurement result to the console.
+            update_speed_count++;
+            if (update_speed_count % 256 == 0) {
+                uprintf("OLED: %u updates, %lu ms\n", update_speed_count, timer_elapsed32(update_speed_start_timer));
+            }
+
+            // Toggle between the "all on" and "all off" states and trigger the screen update again.
+            if (test_mode == TEST_ALL_ON) {
+                test_mode = TEST_ALL_OFF;
+            } else {
+                test_mode = TEST_ALL_ON;
+            }
+            need_update = true;
+        }
+    }
+
+    // The sample implementation of oled_task_user() in the documentation redraws the image after every call, relying on
+    // the fact that drawing functions check whether the output actually changes anything in the image, and set dirty
+    // bits only when something has actually changed.  However, redrawing the image only when some of the underlying
+    // data has changed is more efficient.  Make it possible to test both modes here.
+    if (!draw_always || update_speed_test) {
+        // Draw the image only when the `need_update` flag is set, except for the "slow update" test.
+        // This mode is also forced when the screen update speed test is performed.
+        if (!need_update) {
+            if (test_mode != TEST_SLOW_UPDATE) {
+                return;
+            }
+        }
+        need_update = false;
+    }
+
+    switch (test_mode) {
+        case TEST_LOGO:
+            test_logo();
+            break;
+        case TEST_CHARACTERS:
+            test_characters();
+            break;
+        case TEST_SLOW_UPDATE:
+            test_slow_update();
+            break;
+        case TEST_ALL_ON:
+            oled_write_raw_P(fill_ff, sizeof(fill_ff));
+            break;
+        case TEST_FRAME:
+            test_frame();
+            break;
+        case TEST_ALL_OFF:
+            // `oled_clear()` is faster, but cannot be used with `draw_always`, because it does not check the previous
+            // content of the buffer and always marks the whole buffer as dirty.
+            if (update_speed_test) {
+                oled_clear();
+            } else {
+                test_fill(0x00, 0x00, 1);
+            }
+            break;
+        case TEST_FILL_HORZ_0:
+            test_fill(0x55, 0x55, 1);
+            break;
+        case TEST_FILL_HORZ_1:
+            test_fill(0xaa, 0xaa, 1);
+            break;
+        case TEST_FILL_VERT_0:
+            test_fill(0xff, 0x00, 1);
+            break;
+        case TEST_FILL_VERT_1:
+            test_fill(0x00, 0xff, 1);
+            break;
+        case TEST_FILL_CHECKERBOARD_1:
+            test_fill(0x55, 0xaa, 1);
+            break;
+        case TEST_FILL_CHECKERBOARD_2:
+            test_fill(0x33, 0xcc, 2);
+            break;
+        case TEST_FILL_CHECKERBOARD_4:
+            test_fill(0x0f, 0xf0, 4);
+            break;
+
+        case TEST_DRAW_ALWAYS_ON:
+            oled_write_P(PSTR("Draw Always"), false);
+            break;
+        case TEST_DRAW_ALWAYS_OFF:
+            oled_write_P(PSTR("Draw Once"), false);
+            break;
+    }
+}
+
+void keyboard_post_init_user(void) {
+    // Console messages are used for update speed test results
+    debug_enable = true;
+}

keyboards/handwired/onekey/keymaps/oled/readme.md

@@ -0,0 +1,23 @@
+# OLED tester
+
+Available commands using a single key:
+- Single tap: Switch to the next test pattern.
+- Single hold: Switch to the next orientation (note that 90° and 270° orientations may not work correctly with some displays).
+- Double tap: Toggle horizontal scrolling of the top row.  Note that this scrolling is implemented by the controller and has major limitations: it works only with SSD1306-based displays, blocks all display updates, may not work correctly if the display width is less than 128 pixels, and does not handle 90°/270° rotation properly.
+- Tap and hold: Change scrolling speed (because of controller limitations, scrolling needs to be started again manually using a double tap).
+- Triple tap: Start or stop the update speed test.  This test repeatedly fills the display with all-on and all-off pixels, measures the time required for updating the display, and prints the measured values to the HID console every 256th refresh.
+- Double tap and hold: Switch between the “draw once” (default) and “draw always” modes.  The “draw always” mode means that `oled_task_user()` redraws the whole picture completely every time it is called; the example code in the OLED feature documentation is written in this style.  Testing the “draw always” mode can uncover bugs in the implementation of drawing functions (they must not set the dirty mark if the buffer content is not actually changed).
+
+Available test patterns:
+- QMK logo (clipped to fit on the display).
+- Fill the whole screen with as much unique characters as possible (all 94 printable ASCII characters are used, and if the display has more character positions available, the same characters are printed again, but inverted).
+- “Slow update” test — instead of updating the whole screen at once, draw things piece by piece to uncover display update bugs.  The drawing sequence used by this test:
+  - Fill the whole screen with printable ASCII characters (similar to the previous test, but characters are drawn one by one with 250 ms intervals between them, and inverted characters are not used to avoid obscuring the next phases).
+  - Draw a frame along the screen edges, starting from the top left corner and going down along the left edge, then along the bottom, right and top edges, with 50 ms delay after every pixel.
+  - Repeat the same sequence again, but with the character sequence shifted by 1 character (so that the updates would be visible).
+- All pixels on.
+- Pixels at the edges of the screen on.
+- All pixels off.
+- Horizontal on/off 1px lines (two variants - starting from on or off state).
+- Vertical on/off 1px lines (two variants - starting from on or off state).
+- Checkerboard pattern (three variants - 1×1, 2×2, 4×4 pixels).

keyboards/handwired/onekey/keymaps/oled/rules.mk

@@ -0,0 +1,2 @@
+OLED_DRIVER_ENABLE = yes
+TAP_DANCE_ENABLE = yes

keyboards/handwired/onekey/keymaps/pytest_nocpp/keymap.c

@@ -0,0 +1,23 @@
+#include QMK_KEYBOARD_H
+#include "audio.h"
+
+/* THIS FILE WAS GENERATED AND IS EXPERIMENTAL!
+ *
+ * This file was generated by qmk-compile-json. You may or may not want to
+ * edit it directly.
+ */
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT(KC_ENTER)
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+	if (index == 0) {
+		if (clockwise) {
+			tap_code(KC_UP);
+		} else {
+			tap_code(KC_DOWN);
+		}
+	}
+
+};

keyboards/handwired/onekey/pytest/templates/keymap.json

@@ -0,0 +1,3 @@
+{
+  "documentation": "This file is a keymap.json file for handwired/onekey/pytest"
+}

keyboards/handwired/riblee_f401/chconf.h

@@ -1,714 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    rt/templates/chconf.h
- * @brief   Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- *          contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-#define _CHIBIOS_RT_CONF_VER_6_0_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System time counter resolution.
- * @note    Allowed values are 16 or 32 bits.
- */
-#if !defined(CH_CFG_ST_RESOLUTION)
-#define CH_CFG_ST_RESOLUTION                32
-#endif
-
-/**
- * @brief   System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- *          setting also defines the system tick time unit.
- */
-#if !defined(CH_CFG_ST_FREQUENCY)
-#define CH_CFG_ST_FREQUENCY                 10000
-#endif
-
-/**
- * @brief   Time intervals data size.
- * @note    Allowed values are 16, 32 or 64 bits.
- */
-#if !defined(CH_CFG_INTERVALS_SIZE)
-#define CH_CFG_INTERVALS_SIZE               32
-#endif
-
-/**
- * @brief   Time types data size.
- * @note    Allowed values are 16 or 32 bits.
- */
-#if !defined(CH_CFG_TIME_TYPES_SIZE)
-#define CH_CFG_TIME_TYPES_SIZE              32
-#endif
-
-/**
- * @brief   Time delta constant for the tick-less mode.
- * @note    If this value is zero then the system uses the classic
- *          periodic tick. This value represents the minimum number
- *          of ticks that is safe to specify in a timeout directive.
- *          The value one is not valid, timeouts are rounded up to
- *          this value.
- */
-#if !defined(CH_CFG_ST_TIMEDELTA)
-#define CH_CFG_ST_TIMEDELTA                 2
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- *          threads before preemption occurs. Setting this value to zero
- *          disables the preemption for threads with equal priority and the
- *          round robin becomes cooperative. Note that higher priority
- *          threads can still preempt, the kernel is always preemptive.
- * @note    Disabling the round robin preemption makes the kernel more compact
- *          and generally faster.
- * @note    The round robin preemption is not supported in tickless mode and
- *          must be set to zero in that case.
- */
-#if !defined(CH_CFG_TIME_QUANTUM)
-#define CH_CFG_TIME_QUANTUM                 0
-#endif
-
-/**
- * @brief   Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- *          then the whole available RAM is used. The core memory is made
- *          available to the heap allocator and/or can be used directly through
- *          the simplified core memory allocator.
- *
- * @note    In order to let the OS manage the whole RAM the linker script must
- *          provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note    Requires @p CH_CFG_USE_MEMCORE.
- */
-#if !defined(CH_CFG_MEMCORE_SIZE)
-#define CH_CFG_MEMCORE_SIZE                 0
-#endif
-
-/**
- * @brief   Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- *          does not spawn the idle thread. The application @p main()
- *          function becomes the idle thread and must implement an
- *          infinite loop.
- */
-#if !defined(CH_CFG_NO_IDLE_THREAD)
-#define CH_CFG_NO_IDLE_THREAD               FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- *          is used when two possible implementations exist.
- *
- * @note    This is not related to the compiler optimization options.
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_OPTIMIZE_SPEED)
-#define CH_CFG_OPTIMIZE_SPEED               TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_TM)
-#define CH_CFG_USE_TM                       TRUE
-#endif
-
-/**
- * @brief   Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_REGISTRY)
-#define CH_CFG_USE_REGISTRY                 TRUE
-#endif
-
-/**
- * @brief   Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- *          the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_WAITEXIT)
-#define CH_CFG_USE_WAITEXIT                 TRUE
-#endif
-
-/**
- * @brief   Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_SEMAPHORES)
-#define CH_CFG_USE_SEMAPHORES               TRUE
-#endif
-
-/**
- * @brief   Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- *          priority rather than in FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
-#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
-#endif
-
-/**
- * @brief   Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MUTEXES)
-#define CH_CFG_USE_MUTEXES                  TRUE
-#endif
-
-/**
- * @brief   Enables recursive behavior on mutexes.
- * @note    Recursive mutexes are heavier and have an increased
- *          memory footprint.
- *
- * @note    The default is @p FALSE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
-#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
-#endif
-
-/**
- * @brief   Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MUTEXES.
- */
-#if !defined(CH_CFG_USE_CONDVARS)
-#define CH_CFG_USE_CONDVARS                 TRUE
-#endif
-
-/**
- * @brief   Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- *          specification are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_CONDVARS.
- */
-#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
-#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
-#endif
-
-/**
- * @brief   Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_EVENTS)
-#define CH_CFG_USE_EVENTS                   TRUE
-#endif
-
-/**
- * @brief   Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- *          are included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_EVENTS.
- */
-#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
-#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
-#endif
-
-/**
- * @brief   Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MESSAGES)
-#define CH_CFG_USE_MESSAGES                 TRUE
-#endif
-
-/**
- * @brief   Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- *          FIFO order.
- *
- * @note    The default is @p FALSE. Enable this if you have special
- *          requirements.
- * @note    Requires @p CH_CFG_USE_MESSAGES.
- */
-#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
-#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
-#endif
-
-/**
- * @brief   Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- *          included in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#if !defined(CH_CFG_USE_MAILBOXES)
-#define CH_CFG_USE_MAILBOXES                TRUE
-#endif
-
-/**
- * @brief   Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MEMCORE)
-#define CH_CFG_USE_MEMCORE                  TRUE
-#endif
-
-/**
- * @brief   Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- *          @p CH_CFG_USE_SEMAPHORES.
- * @note    Mutexes are recommended.
- */
-#if !defined(CH_CFG_USE_HEAP)
-#define CH_CFG_USE_HEAP                     TRUE
-#endif
-
-/**
- * @brief   Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_MEMPOOLS)
-#define CH_CFG_USE_MEMPOOLS                 TRUE
-#endif
-
-/**
- * @brief   Objects FIFOs APIs.
- * @details If enabled then the objects FIFOs APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_OBJ_FIFOS)
-#define CH_CFG_USE_OBJ_FIFOS                TRUE
-#endif
-
-/**
- * @brief   Pipes APIs.
- * @details If enabled then the pipes APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- */
-#if !defined(CH_CFG_USE_PIPES)
-#define CH_CFG_USE_PIPES                    TRUE
-#endif
-
-/**
- * @brief   Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- *          in the kernel.
- *
- * @note    The default is @p TRUE.
- * @note    Requires @p CH_CFG_USE_WAITEXIT.
- * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#if !defined(CH_CFG_USE_DYNAMIC)
-#define CH_CFG_USE_DYNAMIC                  TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Objects factory options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Objects Factory APIs.
- * @details If enabled then the objects factory APIs are included in the
- *          kernel.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_CFG_USE_FACTORY)
-#define CH_CFG_USE_FACTORY                  TRUE
-#endif
-
-/**
- * @brief   Maximum length for object names.
- * @details If the specified length is zero then the name is stored by
- *          pointer but this could have unintended side effects.
- */
-#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
-#define CH_CFG_FACTORY_MAX_NAMES_LENGTH     8
-#endif
-
-/**
- * @brief   Enables the registry of generic objects.
- */
-#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
-#define CH_CFG_FACTORY_OBJECTS_REGISTRY     TRUE
-#endif
-
-/**
- * @brief   Enables factory for generic buffers.
- */
-#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
-#define CH_CFG_FACTORY_GENERIC_BUFFERS      TRUE
-#endif
-
-/**
- * @brief   Enables factory for semaphores.
- */
-#if !defined(CH_CFG_FACTORY_SEMAPHORES)
-#define CH_CFG_FACTORY_SEMAPHORES           TRUE
-#endif
-
-/**
- * @brief   Enables factory for mailboxes.
- */
-#if !defined(CH_CFG_FACTORY_MAILBOXES)
-#define CH_CFG_FACTORY_MAILBOXES            TRUE
-#endif
-
-/**
- * @brief   Enables factory for objects FIFOs.
- */
-#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
-#define CH_CFG_FACTORY_OBJ_FIFOS            TRUE
-#endif
-
-/**
- * @brief   Enables factory for Pipes.
- */
-#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
-#define CH_CFG_FACTORY_PIPES                TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   Debug option, kernel statistics.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_STATISTICS)
-#define CH_DBG_STATISTICS                   FALSE
-#endif
-
-/**
- * @brief   Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- *          at runtime.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
-#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
-#endif
-
-/**
- * @brief   Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- *          parameters are activated.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_CHECKS)
-#define CH_DBG_ENABLE_CHECKS                FALSE
-#endif
-
-/**
- * @brief   Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- *          activated. This includes consistency checks inside the kernel,
- *          runtime anomalies and port-defined checks.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_ASSERTS)
-#define CH_DBG_ENABLE_ASSERTS               FALSE
-#endif
-
-/**
- * @brief   Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note    The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#if !defined(CH_DBG_TRACE_MASK)
-#define CH_DBG_TRACE_MASK                   CH_DBG_TRACE_MASK_DISABLED
-#endif
-
-/**
- * @brief   Trace buffer entries.
- * @note    The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- *          different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
-#define CH_DBG_TRACE_BUFFER_SIZE            128
-#endif
-
-/**
- * @brief   Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note    The default is @p FALSE.
- * @note    The stack check is performed in a architecture/port dependent way.
- *          It may not be implemented or some ports.
- * @note    The default failure mode is to halt the system with the global
- *          @p panic_msg variable set to @p NULL.
- */
-#if !defined(CH_DBG_ENABLE_STACK_CHECK)
-#define CH_DBG_ENABLE_STACK_CHECK           FALSE
-#endif
-
-/**
- * @brief   Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- *          value when a thread is created. This can be useful for the
- *          runtime measurement of the used stack.
- *
- * @note    The default is @p FALSE.
- */
-#if !defined(CH_DBG_FILL_THREADS)
-#define CH_DBG_FILL_THREADS                 FALSE
-#endif
-
-/**
- * @brief   Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- *          counts the system ticks occurred while executing the thread.
- *
- * @note    The default is @p FALSE.
- * @note    This debug option is not currently compatible with the
- *          tickless mode.
- */
-#if !defined(CH_DBG_THREADS_PROFILING)
-#define CH_DBG_THREADS_PROFILING            FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief   System structure extension.
- * @details User fields added to the end of the @p ch_system_t structure.
- */
-#define CH_CFG_SYSTEM_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   System initialization hook.
- * @details User initialization code added to the @p chSysInit() function
- *          just before interrupts are enabled globally.
- */
-#define CH_CFG_SYSTEM_INIT_HOOK() {                                         \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
-  /* Add threads custom fields here.*/
-
-/**
- * @brief   Threads initialization hook.
- * @details User initialization code added to the @p _thread_init() function.
- *
- * @note    It is invoked from within @p _thread_init() and implicitly from all
- *          the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
-  /* Add threads initialization code here.*/                                \
-}
-
-/**
- * @brief   Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
-  /* Add threads finalization code here.*/                                  \
-}
-
-/**
- * @brief   Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
-  /* Context switch code here.*/                                            \
-}
-
-/**
- * @brief   ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() {                                        \
-  /* IRQ prologue code here.*/                                              \
-}
-
-/**
- * @brief   ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() {                                        \
-  /* IRQ epilogue code here.*/                                              \
-}
-
-/**
- * @brief   Idle thread enter hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
-  /* Idle-enter code here.*/                                                \
-}
-
-/**
- * @brief   Idle thread leave hook.
- * @note    This hook is invoked within a critical zone, no OS functions
- *          should be invoked from here.
- * @note    This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
-  /* Idle-leave code here.*/                                                \
-}
-
-/**
- * @brief   Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
-  /* Idle loop code here.*/                                                 \
-}
-
-/**
- * @brief   System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- *          after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
-  /* System tick event code here.*/                                         \
-}
-
-/**
- * @brief   System halt hook.
- * @details This hook is invoked in case to a system halting error before
- *          the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
-  /* System halt code here.*/                                               \
-}
-
-/**
- * @brief   Trace hook.
- * @details This hook is invoked each time a new record is written in the
- *          trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) {                                            \
-  /* Trace code here.*/                                                     \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h).    */
-/*===========================================================================*/
-
-#endif  /* CHCONF_H */
-
-/** @} */

keyboards/handwired/riblee_f401/halconf.h

@@ -1,525 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-/**
- * @file    templates/halconf.h
- * @brief   HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- *          various device drivers from your application. You may also use
- *          this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#define _CHIBIOS_HAL_CONF_
-#define _CHIBIOS_HAL_CONF_VER_7_0_
-
-#include "mcuconf.h"
-
-/**
- * @brief   Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL                         TRUE
-#endif
-
-/**
- * @brief   Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC                         FALSE
-#endif
-
-/**
- * @brief   Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN                         FALSE
-#endif
-
-/**
- * @brief   Enables the cryptographic subsystem.
- */
-#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
-#define HAL_USE_CRY                         FALSE
-#endif
-
-/**
- * @brief   Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC                         FALSE
-#endif
-
-/**
- * @brief   Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT                         FALSE
-#endif
-
-/**
- * @brief   Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C                         FALSE
-#endif
-
-/**
- * @brief   Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S                         FALSE
-#endif
-
-/**
- * @brief   Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU                         FALSE
-#endif
-
-/**
- * @brief   Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC                         FALSE
-#endif
-
-/**
- * @brief   Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI                     FALSE
-#endif
-
-/**
- * @brief   Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM                         FALSE
-#endif
-
-/**
- * @brief   Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC                         FALSE
-#endif
-
-/**
- * @brief   Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC                         FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL                      FALSE
-#endif
-
-/**
- * @brief   Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB                  FALSE
-#endif
-
-/**
- * @brief   Enables the SIO subsystem.
- */
-#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
-#define HAL_USE_SIO                         FALSE
-#endif
-
-/**
- * @brief   Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI                         FALSE
-#endif
-
-/**
- * @brief   Enables the TRNG subsystem.
- */
-#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
-#define HAL_USE_TRNG                        FALSE
-#endif
-
-/**
- * @brief   Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART                        FALSE
-#endif
-
-/**
- * @brief   Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB                         TRUE
-#endif
-
-/**
- * @brief   Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG                         FALSE
-#endif
-
-/**
- * @brief   Enables the WSPI subsystem.
- */
-#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
-#define HAL_USE_WSPI                        FALSE
-#endif
-
-/*===========================================================================*/
-/* PAL driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
-#define PAL_USE_CALLBACKS                   FALSE
-#endif
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
-#define PAL_USE_WAIT                        FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT                        TRUE
-#endif
-
-/**
- * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE                  TRUE
-#endif
-
-/**
- * @brief   Enforces the driver to use direct callbacks rather than OSAL events.
- */
-#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
-#define CAN_ENFORCE_USE_CALLBACKS           FALSE
-#endif
-
-/*===========================================================================*/
-/* CRY driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the SW fall-back of the cryptographic driver.
- * @details When enabled, this option, activates a fall-back software
- *          implementation for algorithms not supported by the underlying
- *          hardware.
- * @note    Fall-back implementations may not be present for all algorithms.
- */
-#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_USE_FALLBACK                FALSE
-#endif
-
-/**
- * @brief   Makes the driver forcibly use the fall-back implementations.
- */
-#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
-#define HAL_CRY_ENFORCE_FALLBACK            FALSE
-#endif
-
-/*===========================================================================*/
-/* DAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
-#define DAC_USE_WAIT                        TRUE
-#endif
-
-/**
- * @brief   Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define DAC_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables the zero-copy API.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY                   FALSE
-#endif
-
-/**
- * @brief   Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS                      TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings.                                          */
-/*===========================================================================*/
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- *          This option is recommended also if the SPI driver does not
- *          use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING                    TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Number of initialization attempts before rejecting the card.
- * @note    Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY                      100
-#endif
-
-/**
- * @brief   Include support for MMC cards.
- * @note    MMC support is not yet implemented so this option must be kept
- *          at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT                     FALSE
-#endif
-
-/**
- * @brief   Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- *          routines releasing some extra CPU time for the threads with
- *          lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING                    TRUE
-#endif
-
-/**
- * @brief   OCR initialization constant for V20 cards.
- */
-#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
-#define SDC_INIT_OCR_V20                    0x50FF8000U
-#endif
-
-/**
- * @brief   OCR initialization constant for non-V20 cards.
- */
-#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
-#define SDC_INIT_OCR                        0x80100000U
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings.                                           */
-/*===========================================================================*/
-
-/**
- * @brief   Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- *          default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE              38400
-#endif
-
-/**
- * @brief   Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- *          buffers depending on the requirements of your application.
- * @note    The default is 16 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE                 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting.                                        */
-/*===========================================================================*/
-
-/**
- * @brief   Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- *          the USB data endpoint maximum packet size.
- * @note    The default is 256 bytes for both the transmission and receive
- *          buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE             256
-#endif
-
-/**
- * @brief   Serial over USB number of buffers.
- * @note    The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER           2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT                        TRUE
-#endif
-
-/**
- * @brief   Enables circular transfers APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
-#define SPI_USE_CIRCULAR                    FALSE
-#endif
-
-
-/**
- * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION            TRUE
-#endif
-
-/**
- * @brief   Handling method for SPI CS line.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
-#define SPI_SELECT_MODE                     SPI_SELECT_MODE_PAD
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings.                                             */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT                       FALSE
-#endif
-
-/**
- * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION           FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings.                                              */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT                        TRUE
-#endif
-
-/*===========================================================================*/
-/* WSPI driver related settings.                                             */
-/*===========================================================================*/
-
-/**
- * @brief   Enables synchronous APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
-#define WSPI_USE_WAIT                       TRUE
-#endif
-
-/**
- * @brief   Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
- * @note    Disabling this option saves both code and data space.
- */
-#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define WSPI_USE_MUTUAL_EXCLUSION           TRUE
-#endif
-
-#endif /* HALCONF_H */
-
-/** @} */

keyboards/handwired/riblee_f401/mcuconf.h

@@ -1,253 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * STM32F4xx drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the whole
- * driver is enabled in halconf.h.
- *
- * IRQ priorities:
- * 15...0       Lowest...Highest.
- *
- * DMA priorities:
- * 0...3        Lowest...Highest.
- */
-
-#define STM32F4xx_MCUCONF
-
-/*
- * HAL driver system settings.
- */
-#define STM32_NO_INIT                       FALSE
-#define STM32_HSI_ENABLED                   TRUE
-#define STM32_LSI_ENABLED                   TRUE
-#define STM32_HSE_ENABLED                   TRUE
-#define STM32_LSE_ENABLED                   FALSE
-#define STM32_CLOCK48_REQUIRED              TRUE
-#define STM32_SW                            STM32_SW_PLL
-#define STM32_PLLSRC                        STM32_PLLSRC_HSE
-#define STM32_PLLM_VALUE                    25       
-#define STM32_PLLN_VALUE                    336     
-#define STM32_PLLP_VALUE                    4       
-#define STM32_PLLQ_VALUE                    7       
-#define STM32_HPRE                          STM32_HPRE_DIV1  
-#define STM32_PPRE1                         STM32_PPRE1_DIV4  
-#define STM32_PPRE2                         STM32_PPRE2_DIV2 
-#define STM32_RTCSEL                        STM32_RTCSEL_LSI
-#define STM32_RTCPRE_VALUE                  8
-#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
-#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
-#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
-#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
-#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
-#define STM32_PLLI2SN_VALUE                 192
-#define STM32_PLLI2SR_VALUE                 5
-#define STM32_PVD_ENABLE                    FALSE
-#define STM32_PLS                           STM32_PLS_LEV0
-#define STM32_BKPRAM_ENABLE                 FALSE
-
-/*
- * IRQ system settings.
- */
-#define STM32_IRQ_EXTI0_PRIORITY            6
-#define STM32_IRQ_EXTI1_PRIORITY            6
-#define STM32_IRQ_EXTI2_PRIORITY            6
-#define STM32_IRQ_EXTI3_PRIORITY            6
-#define STM32_IRQ_EXTI4_PRIORITY            6
-#define STM32_IRQ_EXTI5_9_PRIORITY          6
-#define STM32_IRQ_EXTI10_15_PRIORITY        6
-#define STM32_IRQ_EXTI16_PRIORITY           6
-#define STM32_IRQ_EXTI17_PRIORITY           15
-#define STM32_IRQ_EXTI18_PRIORITY           6
-#define STM32_IRQ_EXTI19_PRIORITY           6
-#define STM32_IRQ_EXTI20_PRIORITY           6
-#define STM32_IRQ_EXTI21_PRIORITY           15
-#define STM32_IRQ_EXTI22_PRIORITY           15
-
-/*
- * ADC driver system settings.
- */
-#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4
-#define STM32_ADC_USE_ADC1                  FALSE
-#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
-#define STM32_ADC_ADC1_DMA_PRIORITY         2
-#define STM32_ADC_IRQ_PRIORITY              6
-#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
-
-/*
- * GPT driver system settings.
- */
-#define STM32_GPT_USE_TIM1                  FALSE
-#define STM32_GPT_USE_TIM2                  FALSE
-#define STM32_GPT_USE_TIM3                  FALSE
-#define STM32_GPT_USE_TIM4                  FALSE
-#define STM32_GPT_USE_TIM5                  FALSE
-#define STM32_GPT_USE_TIM9                  FALSE
-#define STM32_GPT_USE_TIM11                 FALSE
-#define STM32_GPT_TIM1_IRQ_PRIORITY         7
-#define STM32_GPT_TIM2_IRQ_PRIORITY         7
-#define STM32_GPT_TIM3_IRQ_PRIORITY         7
-#define STM32_GPT_TIM4_IRQ_PRIORITY         7
-#define STM32_GPT_TIM5_IRQ_PRIORITY         7
-#define STM32_GPT_TIM9_IRQ_PRIORITY         7
-#define STM32_GPT_TIM11_IRQ_PRIORITY        7
-
-/*
- * I2C driver system settings.
- */
-#define STM32_I2C_USE_I2C1                  FALSE
-#define STM32_I2C_USE_I2C2                  FALSE
-#define STM32_I2C_USE_I2C3                  FALSE
-#define STM32_I2C_BUSY_TIMEOUT              50
-#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
-#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
-#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
-#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
-#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
-#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
-#define STM32_I2C_I2C1_IRQ_PRIORITY         5
-#define STM32_I2C_I2C2_IRQ_PRIORITY         5
-#define STM32_I2C_I2C3_IRQ_PRIORITY         5
-#define STM32_I2C_I2C1_DMA_PRIORITY         3
-#define STM32_I2C_I2C2_DMA_PRIORITY         3
-#define STM32_I2C_I2C3_DMA_PRIORITY         3
-#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
-
-/*
- * I2S driver system settings.
- */
-#define STM32_I2S_USE_SPI2                  FALSE
-#define STM32_I2S_USE_SPI3                  FALSE
-#define STM32_I2S_SPI2_IRQ_PRIORITY         10
-#define STM32_I2S_SPI3_IRQ_PRIORITY         10
-#define STM32_I2S_SPI2_DMA_PRIORITY         1
-#define STM32_I2S_SPI3_DMA_PRIORITY         1
-#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
-#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
-#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
-#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
-#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
-
-/*
- * ICU driver system settings.
- */
-#define STM32_ICU_USE_TIM1                  FALSE
-#define STM32_ICU_USE_TIM2                  FALSE
-#define STM32_ICU_USE_TIM3                  FALSE
-#define STM32_ICU_USE_TIM4                  FALSE
-#define STM32_ICU_USE_TIM5                  FALSE
-#define STM32_ICU_USE_TIM9                  FALSE
-#define STM32_ICU_TIM1_IRQ_PRIORITY         7
-#define STM32_ICU_TIM2_IRQ_PRIORITY         7
-#define STM32_ICU_TIM3_IRQ_PRIORITY         7
-#define STM32_ICU_TIM4_IRQ_PRIORITY         7
-#define STM32_ICU_TIM5_IRQ_PRIORITY         7
-#define STM32_ICU_TIM9_IRQ_PRIORITY         7
-
-/*
- * PWM driver system settings.
- */
-#define STM32_PWM_USE_ADVANCED              FALSE
-#define STM32_PWM_USE_TIM1                  FALSE
-#define STM32_PWM_USE_TIM2                  FALSE
-#define STM32_PWM_USE_TIM3                  FALSE
-#define STM32_PWM_USE_TIM4                  FALSE
-#define STM32_PWM_USE_TIM5                  FALSE
-#define STM32_PWM_USE_TIM9                  FALSE
-#define STM32_PWM_TIM1_IRQ_PRIORITY         7
-#define STM32_PWM_TIM2_IRQ_PRIORITY         7
-#define STM32_PWM_TIM3_IRQ_PRIORITY         7
-#define STM32_PWM_TIM4_IRQ_PRIORITY         7
-#define STM32_PWM_TIM5_IRQ_PRIORITY         7
-#define STM32_PWM_TIM9_IRQ_PRIORITY         7
-
-/*
- * SERIAL driver system settings.
- */
-#define STM32_SERIAL_USE_USART1             FALSE
-#define STM32_SERIAL_USE_USART2             FALSE
-#define STM32_SERIAL_USE_USART6             FALSE
-#define STM32_SERIAL_USART1_PRIORITY        12
-#define STM32_SERIAL_USART2_PRIORITY        12
-#define STM32_SERIAL_USART6_PRIORITY        12
-
-/*
- * SPI driver system settings.
- */
-#define STM32_SPI_USE_SPI1                  FALSE
-#define STM32_SPI_USE_SPI2                  FALSE
-#define STM32_SPI_USE_SPI3                  FALSE
-#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
-#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
-#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
-#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
-#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
-#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
-#define STM32_SPI_SPI1_DMA_PRIORITY         1
-#define STM32_SPI_SPI2_DMA_PRIORITY         1
-#define STM32_SPI_SPI3_DMA_PRIORITY         1
-#define STM32_SPI_SPI1_IRQ_PRIORITY         10
-#define STM32_SPI_SPI2_IRQ_PRIORITY         10
-#define STM32_SPI_SPI3_IRQ_PRIORITY         10
-#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
-
-/*
- * ST driver system settings.
- */
-#define STM32_ST_IRQ_PRIORITY               8
-#define STM32_ST_USE_TIMER                  2
-
-/*
- * UART driver system settings.
- */
-#define STM32_UART_USE_USART1               FALSE
-#define STM32_UART_USE_USART2               FALSE
-#define STM32_UART_USE_USART6               FALSE
-#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
-#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
-#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
-#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
-#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
-#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
-#define STM32_UART_USART1_IRQ_PRIORITY      12
-#define STM32_UART_USART2_IRQ_PRIORITY      12
-#define STM32_UART_USART6_IRQ_PRIORITY      12
-#define STM32_UART_USART1_DMA_PRIORITY      0
-#define STM32_UART_USART2_DMA_PRIORITY      0
-#define STM32_UART_USART6_DMA_PRIORITY      0
-#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
-
-/*
- * USB driver system settings.
- */
-#define STM32_USB_USE_OTG1                  TRUE
-#define STM32_USB_OTG1_IRQ_PRIORITY         14
-#define STM32_USB_OTG1_RX_FIFO_SIZE         512
-#define STM32_USB_OTG_THREAD_PRIO           NORMALPRIO+1
-#define STM32_USB_OTG_THREAD_STACK_SIZE     128
-#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
-
-/*
- * WDG driver system settings.
- */
-#define STM32_WDG_USE_IWDG                  FALSE
-
-#endif /* MCUCONF_H */

keyboards/handwired/riblee_f401/riblee_f401.h

@@ -1,5 +1,5 @@
 /*
-Copyright 2020 QMK Community, Daniel Reibl <janos.daniel.reibl@protonmail.com>
+Copyright 2020 QMK Community, Janos Daniel Reibl <janos.daniel.reibl@protonmail.com> @riblee
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by

keyboards/handwired/riblee_f401/rules.mk

@@ -22,3 +22,5 @@ BACKLIGHT_DRIVER = software
 RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
 BLUETOOTH_ENABLE = no       # Enable Bluetooth
 AUDIO_ENABLE = no           # Audio output
+
+LAYOUTS = ortho_5x12

keyboards/handwired/sick_pad/config.h

@@ -0,0 +1,47 @@
+/* Copyright 2020 Joel Schneider
+  *
+  * This program is free software: you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation, either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+  */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xDA20
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    FedorSosnin
+#define PRODUCT         SiCK-PAD
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 4
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 }
+#define MATRIX_COL_PINS { B9, B15, B14, B13 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE

keyboards/handwired/sick_pad/info.json

@@ -0,0 +1,34 @@
+{
+    "keyboard_name": "sick_pad",
+    "url": "https://www.thingiverse.com/thing:3682168",
+    "maintainer": "jmschneider",
+    "width": 4,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_numpad_5x4": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+                {"x":3, "y":1, "h":2},
+
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+
+                {"x":0, "y":4, "w":2},
+                {"x":2, "y":4},
+                {"x":3, "y":3, "h":2}
+            ]
+        }
+    }
+}