Add STM32Duino to bootloader selection (#10558 )

Remove bootloader_defs.h for some F072 boards (#10582 )
Partial fix for sendstring_french.h (#10623 )
2020-10-13 03:19:50 +11:00 · 2020-10-13 03:18:21 +11:00 · 2020-10-13 03:17:11 +11:00 · 2020-10-13 01:08:38 +09:00 · 2020-10-13 01:07:59 +09:00 · 2020-10-13 01:07:11 +09:00
468 changed files with 16620 additions and 3629 deletions
--- a/bootloader.mk
+++ b/bootloader.mk
@@ -28,6 +28,7 @@
 # bootloadHID    HIDBootFlash compatible (ATmega32A)
 # USBasp         USBaspLoader (ATmega328P)
 # kiibohd        Input:Club Kiibohd bootloader (only used on their boards)
+# stm32duino     STM32Duino (STM32F103x8)
 #
 # BOOTLOADER_SIZE can still be defined manually, but it's recommended
 # you add any possible configuration to this list
@@ -106,3 +107,14 @@ ifeq ($(strip $(BOOTLOADER)), kiibohd)
    DFU_ARGS = -d 1C11:B007
    DFU_SUFFIX_ARGS = -v 1C11 -p B007
 endif
+
+ifeq ($(strip $(BOOTLOADER)), stm32duino)
+    OPT_DEFS += -DBOOTLOADER_STM32DUINO
+    MCU_LDSCRIPT ?= STM32F103x8_stm32duino_bootloader
+    BOARD = STM32_F103_STM32DUINO
+    # STM32F103 does NOT have an USB bootloader in ROM (only serial), so setting anything here does not make much sense
+    STM32_BOOTLOADER_ADDRESS = 0x80000000
+
+    DFU_ARGS = -d 1EAF:0003 -a2 -R
+    DFU_SUFFIX_ARGS = -v 1EAF -p 0003
+endif
--- a/docs/cli_commands.md
+++ b/docs/cli_commands.md
@@ -167,6 +167,17 @@ Creates a keymap.c from a QMK Configurator export.
 qmk json2c [-o OUTPUT] filename
 ```

+## `qmk c2json`
+
+Creates a keymap.json from a keymap.c.  
+**Note:** Parsing C source files is not easy, therefore this subcommand may not work your keymap. In some cases not using the C pre-processor helps.
+
+**Usage**:
+
+```
+qmk c2json [--no-cpp] [-o OUTPUT] filename
+```
+
 ## `qmk list-keyboards`

 This command lists all the keyboards currently defined in `qmk_firmware`
--- a/docs/faq_build.md
+++ b/docs/faq_build.md
@@ -13,65 +13,93 @@ An example of using `sudo`, when your controller is ATMega32u4:

 or just:

-    $ sudo make <keyboard>:<keymap>:dfu
+    $ sudo make <keyboard>:<keymap>:flash

 Note that running `make` with `sudo` is generally ***not*** a good idea, and you should use one of the former methods, if possible.

 ### Linux `udev` Rules
-On Linux, you'll need proper privileges to access the MCU. You can either use
-`sudo` when flashing firmware, or place these files in `/etc/udev/rules.d/`. Once added run the following:
-```console
+
+On Linux, you'll need proper privileges to communicate with the bootloader device. You can either use `sudo` when flashing firmware, or place this file in `/etc/udev/rules.d/`:
+
+**/etc/udev/rules.d/50-qmk.rules:**
+```
+# Atmel DFU
+### ATmega16U2
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FEF", TAG+="uaccess", RUN{builtin}+="uaccess"
+### ATmega32U2
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF0", TAG+="uaccess", RUN{builtin}+="uaccess"
+### ATmega16U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF3", TAG+="uaccess", RUN{builtin}+="uaccess"
+### ATmega32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF4", TAG+="uaccess", RUN{builtin}+="uaccess"
+### AT90USB64
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF9", TAG+="uaccess", RUN{builtin}+="uaccess"
+### AT90USB128
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FFB", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# Input Club
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1C11", ATTRS{idProduct}=="B007", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# STM32duino
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1EAF", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess"
+# STM32 DFU
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="DF11", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# BootloadHID
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DF", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# USBAspLoader
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DC", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# ModemManager should ignore the following devices
+# Atmel SAM-BA (Massdrop)
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="6124", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+
+# Caterina (Pro Micro)
+## Spark Fun Electronics
+### Pro Micro 3V3/8MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### Pro Micro 5V/16MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### LilyPad 3V3/8MHz (and some Pro Micro clones)
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9207", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## Pololu Electronics
+### A-Star 32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1FFB", ATTRS{idProduct}=="0101", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## Arduino SA
+### Leonardo
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### Micro
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## Adafruit Industries LLC
+### Feather 32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000C", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### ItsyBitsy 32U4 3V3/8MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000D", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### ItsyBitsy 32U4 5V/16MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000E", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## dog hunter AG
+### Leonardo
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### Micro
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+```
+
+Once added, run the following:
+
+```
 sudo udevadm control --reload-rules
 sudo udevadm trigger
 ```

-**/etc/udev/rules.d/50-atmel-dfu.rules:**
-```
-# Atmel ATMega32U4
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", TAG+="uaccess", RUN{builtin}+="uaccess"
-# Atmel USBKEY AT90USB1287
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", TAG+="uaccess", RUN{builtin}+="uaccess"
-# Atmel ATMega32U2
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", TAG+="uaccess", RUN{builtin}+="uaccess"
-```
-
-**/etc/udev/rules.d/54-input-club-keyboard.rules:**
+**Note:** With older versions of ModemManager (< 1.12), filtering only works when not in strict mode. The following commands can update that setting:

 ```
-# Input Club keyboard bootloader
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", ATTRS{idProduct}=="b007", TAG+="uaccess", RUN{builtin}+="uaccess"
-```
-
-**/etc/udev/rules.d/55-caterina.rules:**
-```
-# ModemManager should ignore the following devices
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-```
-
-**Note:** With older (before 1.12) ModemManager, filtering only works when not in strict mode, the following commands can update that settings:
-```console
 printf '[Service]\nExecStart=\nExecStart=/usr/sbin/ModemManager --filter-policy=default' | sudo tee /etc/systemd/system/ModemManager.service.d/policy.conf
 sudo systemctl daemon-reload
 sudo systemctl restart ModemManager
 ```

-**/etc/udev/rules.d/56-dfu-util.rules:**
-```
-# stm32duino
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess"
-# Generic stm32
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", TAG+="uaccess", RUN{builtin}+="uaccess"
-```
-
-**/etc/udev/rules.d/57-bootloadhid.rules:**
-```
-# bootloadHID
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05df", TAG+="uaccess", RUN{builtin}+="uaccess"
-```
-
 ### Serial device is not detected in bootloader mode on Linux
 Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as
 Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices may require `USB_SERIAL` and any of its sub options.
@@ -96,46 +124,6 @@ You can buy a really unique VID:PID here. I don't think you need this for person
 - http://www.obdev.at/products/vusb/license.html
 - http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1

-## BOOTLOADER_SIZE for AVR
-Note that Teensy2.0++ bootloader size is 2048byte. Some Makefiles may have wrong comment.
-
-```
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 2048
-#   Atmel DFU loader 4096       (TMK Alt Controller)
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
-```
-
-## `avr-gcc: internal compiler error: Abort trap: 6 (program cc1)` on MacOS
-
-This is an issue with updating on brew, causing symlinks that avr-gcc depend on getting mangled.
-
-The solution is to remove and reinstall all affected modules.
-
-```
-brew rm avr-gcc avr-gcc@8 dfu-programmer dfu-util gcc-arm-none-eabi arm-gcc-bin@8 avrdude qmk
-brew install qmk/qmk/qmk
-brew link --force avr-gcc@8
-brew link --force arm-gcc-bin@8
-```
-
-### `avr-gcc` and LUFA
-
-If you updated your `avr-gcc` and you see errors involving LUFA, for example:
-
-`lib/lufa/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h:380:5: error: 'const' attribute on function returning 'void'`
-
-For now, you need to rollback `avr-gcc` to 8 in Homebrew.
-
-```
-brew uninstall --force avr-gcc
-brew install avr-gcc@8
-brew link --force avr-gcc@8
-```
-
 ### I just flashed my keyboard and it does nothing/keypresses don't register - it's also ARM (rev6 planck, clueboard 60, hs60v2, etc...) (Feb 2019)
 Due to how EEPROM works on ARM based chips, saved settings may no longer be valid.  This affects the default layers, and *may*, under certain circumstances we are still figuring out, make the keyboard unusable.  Resetting the EEPROM will correct this.

--- a/docs/faq_debug.md
+++ b/docs/faq_debug.md
@@ -31,20 +31,6 @@ Check:
 - try using 'print' function instead of debug print. See **common/print.h**.
 - disconnect other devices with console function. See [Issue #97](https://github.com/tmk/tmk_keyboard/issues/97).

-## Linux or UNIX Like System Requires Super User Privilege
-Just use 'sudo' to execute *hid_listen* with privilege.
-```
-$ sudo hid_listen
-```
-
-Or add an *udev rule* for TMK devices with placing a file in rules directory. The directory may vary on each system.
-
-File: /etc/udev/rules.d/52-tmk-keyboard.rules(in case of Ubuntu)
-```
-# tmk keyboard products     https://github.com/tmk/tmk_keyboard
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
-```
-
 ***

 # Miscellaneous
--- a/docs/feature_advanced_keycodes.md
+++ b/docs/feature_advanced_keycodes.md
@@ -2,21 +2,24 @@

 These allow you to combine a modifier with a keycode. When pressed, the keydown event for the modifier, then `kc` will be sent. On release, the keyup event for `kc`, then the modifier will be sent.

-|Key       |Aliases                        |Description                                         |
-|----------|-------------------------------|----------------------------------------------------|
-|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                    |
-|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                      |
-|`LALT(kc)`|`A(kc)`, `LOPT(kc)`            |Hold Left Alt and press `kc`                        |
-|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                        |
-|`RCTL(kc)`|                               |Hold Right Control and press `kc`                   |
-|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                     |
-|`RALT(kc)`|`ROPT(kc)`, `ALGR(kc)`         |Hold Right Alt and press `kc`                       |
-|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                       |
-|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`              |
-|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`            |
-|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`       |
-|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`     |
-|`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`|
+|Key       |Aliases                        |Description                                           |
+|----------|-------------------------------|------------------------------------------------------|
+|`LCTL(kc)`|`C(kc)`                        |Hold Left Control and press `kc`                      |
+|`LSFT(kc)`|`S(kc)`                        |Hold Left Shift and press `kc`                        |
+|`LALT(kc)`|`A(kc)`, `LOPT(kc)`            |Hold Left Alt and press `kc`                          |
+|`LGUI(kc)`|`G(kc)`, `LCMD(kc)`, `LWIN(kc)`|Hold Left GUI and press `kc`                          |
+|`RCTL(kc)`|                               |Hold Right Control and press `kc`                     |
+|`RSFT(kc)`|                               |Hold Right Shift and press `kc`                       |
+|`RALT(kc)`|`ROPT(kc)`, `ALGR(kc)`         |Hold Right Alt and press `kc`                         |
+|`RGUI(kc)`|`RCMD(kc)`, `LWIN(kc)`         |Hold Right GUI and press `kc`                         |
+|`SGUI(kc)`|`SCMD(kc)`, `SWIN(kc)`         |Hold Left Shift and GUI and press `kc`                |
+|`LCA(kc)` |                               |Hold Left Control and Alt and press `kc`              |
+|`LSA(kc)` |                               |Hold Left Shift and Left Alt and press `kc`           |
+|`RSA(kc)` |`SAGR(kc)`                     |Hold Right Shift and Right Alt (AltGr) and press `kc` |
+|`RCS(kc)` |                               |Hold Right Control and Right Shift and press `kc`     |
+|`LCAG(kc)`|                               |Hold Left Control, Alt and GUI and press `kc`         |
+|`MEH(kc)` |                               |Hold Left Control, Shift and Alt and press `kc`       |
+|`HYPR(kc)`|                               |Hold Left Control, Shift, Alt and GUI and press `kc`  |

 You can also chain them, for example `LCTL(LALT(KC_DEL))` or `C(A(KC_DEL))` makes a key that sends Control+Alt+Delete with a single keypress.

--- a/docs/feature_combo.md
+++ b/docs/feature_combo.md
@@ -55,7 +55,7 @@ combo_t key_combos[COMBO_COUNT] = {
  [XV_PASTE] = COMBO_ACTION(paste_combo),
 };

-void process_combo_event(uint8_t combo_index, bool pressed) {
+void process_combo_event(uint16_t combo_index, bool pressed) {
  switch(combo_index) {
    case ZC_COPY:
      if (pressed) {
--- a/docs/hardware_keyboard_guidelines.md
+++ b/docs/hardware_keyboard_guidelines.md
@@ -192,7 +192,7 @@ When developing your keyboard, keep in mind that all warnings will be treated as

 ## Copyright Blurb

-If you're adapting your keyboard's setup from another project, but not using the same code, but sure to update the copyright header at the top of the files to show your name, in this format:
+If you're adapting your keyboard's setup from another project, but not using the same code, be sure to update the copyright header at the top of the files to show your name, in this format:

    Copyright 2017 Your Name <your@email.com>

--- a/docs/ja/breaking_changes.md
+++ b/docs/ja/breaking_changes.md
@@ -2,8 +2,8 @@

 <!---
  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: 0.9.0:docs/breaking_changes.md
-  git diff 0.9.0 HEAD -- docs/breaking_changes.md | cat
+  original document: 0.10.33:docs/breaking_changes.md
+  git diff 0.10.33 HEAD -- docs/breaking_changes.md | cat
 -->

 このドキュメントは QMK の互換性を破る変更(Breaking change) のプロセスについて説明します。
@@ -15,22 +15,23 @@ Breaking change ピリオドとは、危険な変更、または予想外の変

 ## 過去の Breaking change には何が含まれますか？

+* [2020年8月29日](ja/ChangeLog/20200829.md)
 * [2020年5月30日](ja/ChangeLog/20200530.md)
 * [2020年2月29日](ja/ChangeLog/20200229.md)
 * [2019年8月30日](ja/ChangeLog/20190830.md)

 ## 次の Breaking change はいつですか？

-次の Breaking change は2020年8月29日に予定されています。
+次の Breaking change は2020年11月28日に予定されています。

 ### 重要な日付

-* [x] 2020年 5月30日 - `develop` が作成されました。毎週リベースされます。
-* [ ] 2020年 8月 1日 - `develop` は新しいPRを取り込みません。
-* [ ] 2020年 8月 1日 - テスターの募集。
-* [ ] 2020年 8月27日 - `master`がロックされ、PR はマージされません。
-* [ ] 2020年 8月29日 - `develop` を `master` にマージします。
-* [ ] 2020年 8月29日 - `master` のロックが解除されます。PR を再びマージすることができます。
+* [x] 2020年 8月29日 - `develop` が作成されました。毎週リベースされます。
+* [ ] 2020年10月31日 - `develop` は新しいPRを取り込みません。
+* [ ] 2020年10月31日 - テスターの募集。
+* [ ] 2020年11月26日 - `master`がロックされ、PR はマージされません。
+* [ ] 2020年11月28日 - `develop` を `master` にマージします。
+* [ ] 2020年11月28日 - `master` のロックが解除されます。PR を再びマージすることができます。

 ## どのような変更が含まれますか？

--- a/docs/ja/faq_build.md
+++ b/docs/ja/faq_build.md
@@ -1,8 +1,8 @@
 # よくあるビルドの質問

 <!---
-  original document: 0.9.43:docs/faq_build.md
-  git diff 0.9.43 HEAD -- docs/faq_build.md | cat
+  original document: 0.10.33:docs/faq_build.md
+  git diff 0.10.33 HEAD -- docs/faq_build.md | cat
 -->

 このページは QMK のビルドに関する質問を説明します。まだビルドをしていない場合は、[ビルド環境のセットアップ](ja/getting_started_build_tools.md) および [Make 手順](ja/getting_started_make_guide.md)ガイドを読むべきです。
@@ -18,64 +18,93 @@

 あるいは、単純に:

-    $ sudo make <keyboard>:<keymap>:dfu
+    $ sudo make <keyboard>:<keymap>:flash

 `make` を `sudo` で実行することは一般的には良い考えでは***なく***、可能であれば前者の方法のいずれかを使うべきです。

 ### Linux の `udev` ルール
-Linux では、MCU にアクセスするには適切な権限が必要です。ファームウェアを書き込む時に `sudo` を使うか、`/etc/udev/rules.d/` にこれらのファイルを配置することで、アクセスすることができます。権限の追加が完了したら、以下を実行します:
-```console
+
+Linux では、ブートローダデバイスと通信するには適切な権限が必要です。ファームウェアを書き込む時に `sudo` を使うか、`/etc/udev/rules.d/` にこのファイルを配置することで、通信することができます。
+
+**/etc/udev/rules.d/50-qmk.rules:**
+```
+# Atmel DFU
+### ATmega16U2
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FEF", TAG+="uaccess", RUN{builtin}+="uaccess"
+### ATmega32U2
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF0", TAG+="uaccess", RUN{builtin}+="uaccess"
+### ATmega16U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF3", TAG+="uaccess", RUN{builtin}+="uaccess"
+### ATmega32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF4", TAG+="uaccess", RUN{builtin}+="uaccess"
+### AT90USB64
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FF9", TAG+="uaccess", RUN{builtin}+="uaccess"
+### AT90USB128
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="2FFB", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# Input Club
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1C11", ATTRS{idProduct}=="B007", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# STM32duino
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1EAF", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess"
+# STM32 DFU
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="DF11", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# BootloadHID
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DF", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# USBAspLoader
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="16C0", ATTRS{idProduct}=="05DC", TAG+="uaccess", RUN{builtin}+="uaccess"
+
+# ModemManager should ignore the following devices
+# Atmel SAM-BA (Massdrop)
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="03EB", ATTRS{idProduct}=="6124", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+
+# Caterina (Pro Micro)
+## Spark Fun Electronics
+### Pro Micro 3V3/8MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### Pro Micro 5V/16MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### LilyPad 3V3/8MHz (and some Pro Micro clones)
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1B4F", ATTRS{idProduct}=="9207", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## Pololu Electronics
+### A-Star 32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1FFB", ATTRS{idProduct}=="0101", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## Arduino SA
+### Leonardo
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### Micro
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## Adafruit Industries LLC
+### Feather 32U4
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000C", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### ItsyBitsy 32U4 3V3/8MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000D", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### ItsyBitsy 32U4 5V/16MHz
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="239A", ATTRS{idProduct}=="000E", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+## dog hunter AG
+### Leonardo
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+### Micro
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="2A03", ATTRS{idProduct}=="0037", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
+```
+
+追加が完了したら、以下を実行します:
+
+```
 sudo udevadm control --reload-rules
 sudo udevadm trigger
 ```

-**/etc/udev/rules.d/50-atmel-dfu.rules:**
-```
-# Atmel ATMega32U4
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff4", TAG+="uaccess", RUN{builtin}+="uaccess"
-# Atmel USBKEY AT90USB1287
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ffb", TAG+="uaccess", RUN{builtin}+="uaccess"
-# Atmel ATMega32U2
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2ff0", TAG+="uaccess", RUN{builtin}+="uaccess"
-```
-
-**/etc/udev/rules.d/54-input-club-keyboard.rules:**
-
-```
-# Input Club keyboard bootloader
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", ATTRS{idProduct}=="b007", TAG+="uaccess", RUN{builtin}+="uaccess"
-```
-
-**/etc/udev/rules.d/55-caterina.rules:**
-```
-# ModemManager should ignore the following devices
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="2341", ATTRS{idProduct}=="0036", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9205", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9203", TAG+="uaccess", RUN{builtin}+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
-```
-
 **注意:** 古い(1.12以前の) ModemManager では、フィルタリングは厳密なモードではない場合にのみ動作し、以下のコマンドはその設定を更新することができます。
-```console
+
+```
 printf '[Service]\nExecStart=\nExecStart=/usr/sbin/ModemManager --filter-policy=default' | sudo tee /etc/systemd/system/ModemManager.service.d/policy.conf
 sudo systemctl daemon-reload
 sudo systemctl restart ModemManager
 ```

-**/etc/udev/rules.d/56-dfu-util.rules:**
-```
-# stm32duino
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", TAG+="uaccess", RUN{builtin}+="uaccess"
-# Generic stm32
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", TAG+="uaccess", RUN{builtin}+="uaccess"
-```
-
-**/etc/udev/rules.d/57-bootloadhid.rules:**
-```
-# bootloadHID
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05df", TAG+="uaccess", RUN{builtin}+="uaccess"
-```
-
 ### Linux のブートローダモードで Serial デバイスが検知されない
 カーネルがデバイスを適切にサポートしていることを確認してください。デバイスが、Pro Micro (Atmega32u4) のように USB ACM を使う場合、`CONFIG_USB_ACM=y` を含めるようにしてください。他のデバイスは `USB_SERIAL` およびそのサブオプションを必要とするかもしれません。

@@ -99,46 +128,6 @@ https://github.com/tmk/tmk_keyboard/issues/150
 - http://www.obdev.at/products/vusb/license.html
 - http://www.mcselec.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=92&option=com_phpshop&Itemid=1

-## AVR のための BOOTLOADER_SIZE
-Teensy2.0++ ブートローダのサイズは 2048 バイトであることに注意してください。一部の Makefile には間違ったコメントがあります。
-
-```
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 2048
-#   Atmel DFU loader 4096       (TMK Alt Controller)
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
-```
-
-## MacOS での `avr-gcc: internal compiler error: Abort trap: 6 (program cc1)` 
-
-これは brew での更新に関する問題で、avr-gcc が依存するシンボリックリンクを壊します。
-
-解決法は全ての影響を受けたモジュールを削除し再インストールすることです。
-
-```
-brew rm avr-gcc avr-gcc@8 dfu-programmer dfu-util gcc-arm-none-eabi arm-gcc-bin@8 avrdude qmk
-brew install qmk/qmk/qmk
-brew link --force avr-gcc@8
-brew link --force arm-gcc-bin@8
-```
-
-### `avr-gcc` と LUFA
-
-`avr-gcc` を更新し、LUFA に関連するエラーが表示された場合、例えば:
-
-`lib/lufa/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h:380:5: error: 'const' attribute on function returning 'void'`
-
-今のところ、Homebrew で `avr-gcc` を 8 にロールバックする必要があります。
-
-```
-brew uninstall --force avr-gcc
-brew install avr-gcc@8
-brew link --force avr-gcc@8
-```
-
 ### キーボードに書き込んだが何も起こらない、あるいはキーの押下が登録されない - ARM (rev6 planck、clueboard 60、hs60v2 など) でも同じ (Feb 2019)
 ARM ベースのチップ上での EEPROM の動作によって、保存された設定が無効になる場合があります。これはデフォルトレイヤに影響し、まだ調査中の特定の環境下でキーボードが使えなくなる*しれません*。EEPROM のリセットでこれが修正されます。

--- a/docs/ja/faq_debug.md
+++ b/docs/ja/faq_debug.md
@@ -1,8 +1,8 @@
 # デバッグの FAQ

 <!---
-  original document: 0.9.10:docs/faq_debug.md
-  git diff 0.9.10 HEAD -- docs/faq_debug.md | cat
+  original document: 0.10.33:docs/faq_debug.md
+  git diff 0.10.33 HEAD -- docs/faq_debug.md | cat
 -->

 このページは、キーボードのトラブルシューティングについての様々な一般的な質問を説明します。
@@ -36,20 +36,6 @@ Linux のような OS でデバイスにアクセスするには、権限が必
 - デバッグ print の代わりに 'print' 関数を使ってみてください。**common/print.h** を見てください。
 - コンソール機能を持つ他のデバイスを切断します。[Issue #97](https://github.com/tmk/tmk_keyboard/issues/97) を見てください。

-## Linux あるいは UNIX のようなシステムはスーパーユーザ権限を必要とします
-権限付きで *hid_listen* を実行するために 'sudo' を使ってください。
-```
-$ sudo hid_listen
-```
-
-または rules ディレクトリにファイルを置いて、TMK デバイスのための *udev rule* を追加します。ディレクトリは各システムで異なるかもしれません。
-
-File: /etc/udev/rules.d/52-tmk-keyboard.rules (Ubuntu の場合)
-```
-# tmk keyboard products     https://github.com/tmk/tmk_keyboard
-SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
-```
-
 ***

 # 雑多なこと
--- a/docs/ja/feature_auto_shift.md
+++ b/docs/ja/feature_auto_shift.md
@@ -1,8 +1,8 @@
 # 自動シフト: なぜシフトキーが必要ですか？

 <!---
-  original document: 0.9.0:docs/feature_auto_shift.md
-  git diff 0.9.0 HEAD -- docs/feature_auto_shift.md | cat
+  original document: 0.10.33:docs/feature_auto_shift.md
+  git diff 0.10.33 HEAD -- docs/feature_auto_shift.md | cat
 -->

 キーをタップすると、その文字を取得します。キーをタップするが、*わずかに*長く押し続けると、シフト状態になります。ほら！シフトキーは必要ありません！
@@ -109,7 +109,7 @@ AからZを含むアルファベット文字を自動シフトしません。
 5. タイムアウトを増やすことに決めた場合は、`KC_ASUP` にマップしたキーを押し、ステップ1に戻ります。
 6. 結果に満足したら、`KC_ASRP` にマップしたキーを押します。キーボードは `AUTO_SHIFT_TIMEOUT` の値を自動的に入力します。
 7. 報告された値で `config.h` の `AUTO_SHIFT_TIMEOUT` を更新します。
-8. `config.h` から `AUTO_SHIFT_SETUP` を削除します。
+8. `config.h` に `AUTO_SHIFT_NO_SETUP` を追加します。
 9. `KC_ASDN`、`KC_ASUP` および `KC_ASRP` のキーバインディングを削除します。
 10. 新しいファームウェアをコンパイルしてアップロードします。

--- a/docs/ja/feature_backlight.md
+++ b/docs/ja/feature_backlight.md
@@ -1,8 +1,8 @@
 # バックライト :id=backlighting

 <!---
-  original document: 0.9.44:docs/feature_backlight.md
-  git diff 0.9.44 HEAD -- docs/feature_backlight.md | cat
+  original document: 0.10.33:docs/feature_backlight.md
+  git diff 0.10.33 HEAD -- docs/feature_backlight.md | cat
 -->

 多くのキーボードは、キースイッチを貫通して配置されたり、キースイッチの下に配置された個々の LED によって、バックライトキーをサポートします。この機能は通常スイッチごとに単一の色しか使用できないため、[RGB アンダーグロー](ja/feature_rgblight.md)および [RGB マトリックス](ja/feature_rgb_matrix.md)機能のどちらとも異なりますが、キーボードに複数の異なる単一色の LED を取り付けることは当然可能です。
@@ -165,8 +165,6 @@ BACKLIGHT_DRIVER = pwm

 現在のところ、ハードウェア PWM のみがサポートされ、タイマー支援はなく、自動設定は提供されません。

-?> STM32F072 のバックライトサポートのテストは制限されています。人によって違うかもしれません。不明な場合は、`rules.mk` で `BACKLIGHT_ENABLE = no` を設定します。
-
 ### ソフトウェア PWM ドライバ :id=software-pwm-driver

 このモードでは、他のキーボードのタスクを実行中に PWM は「エミュレート」されます。追加のプラットフォーム設定なしで最大のハードウェア互換性を提供します。トレードオフは、キーボードが忙しい時にバックライトが揺れる可能性があることです。有効にするには、`rules.mk` に以下を追加します:
--- a/docs/ja/feature_bluetooth.md
+++ b/docs/ja/feature_bluetooth.md
@@ -1,18 +1,18 @@
 # Bluetooth

 <!---
-  original document: 0.9.0:docs/feature_bluetooth.md
-  git diff 0.9.0 HEAD -- docs/feature_bluetooth.md | cat
+  original document: 0.10.33:docs/feature_bluetooth.md
+  git diff 0.10.33 HEAD -- docs/feature_bluetooth.md | cat
 -->

 ## Bluetooth の既知のサポートハードウェア

 現在のところ Bluetooth のサポートは AVR ベースのチップに限られます。Bluetooth 2.1 については、QMK は RN-42 モジュールをサポートします。より最近の BLE プロトコルについては、現在のところ Adafruit Bluefruit SPI Friend のみが直接サポートされています。iOS デバイスに接続するには、BLE が必要です。iOS はマウス入力をサポートしないことに注意してください。

-| ボード | Bluetooth プロトコル | 接続タイプ | rules.mk | Bluetooth チップ |
-|----------------------------------------------------------------|----------------------------|----------------|---------------------------|--------------|
-| Roving Networks RN-42 (Sparkfun Bluesmirf) | Bluetooth Classic | UART | `BLUETOOTH = RN42` | RN-42 |
-| [Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633) | Bluetooth Low Energy | SPI | `BLUETOOTH = AdafruitBLE` | nRF51822 |
+| ボード                                                           | Bluetooth プロトコル | 接続タイプ | rules.mk                  | Bluetooth チップ |
+| ---------------------------------------------------------------- | -------------------- | ---------- | ------------------------- | ---------------- |
+| Roving Networks RN-42 (Sparkfun Bluesmirf)                       | Bluetooth Classic    | UART       | `BLUETOOTH = RN42`        | RN-42            |
+| [Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633) | Bluetooth Low Energy | SPI        | `BLUETOOTH = AdafruitBLE` | nRF51822         |

 まだサポートされていませんが、可能性のあるもの:
 * [Bluefruit LE UART Friend](https://www.adafruit.com/product/2479)。[tmk 実装がおそらく見つかります](https://github.com/tmk/tmk_keyboard/issues/514)
@@ -30,7 +30,10 @@ Bluefruit UART friend は SPI friend に変換することができますが、

 <!-- FIXME: Document bluetooth support more completely. -->
 ## Bluetooth の Rules.mk オプション
-これらのうちの1つだけを使ってください
+
+現在サポートされている Bluetooth チップセットは [N-キーロールオーバー (NKRO)](ja/reference_glossary.md#n-key-rollover-nkro) をサポートしていません。そのため、`rules.mk` に `NKRO_ENABLE = no` を含めなければなりません。
+
+Bluetooth を有効にするには、以下のうちの1つだけを使ってください:
 * BLUETOOTH_ENABLE = yes (レガシーオプション)
 * BLUETOOTH = RN42
 * BLUETOOTH = AdafruitBLE
@@ -39,8 +42,8 @@ Bluefruit UART friend は SPI friend に変換することができますが、

 これは複数のキーボードの出力が選択できる場合に使われます。現在のところ、これは USB と Bluetooth の両方をサポートするキーボードで、それらの間の切り替えのみが可能です。

-| 名前 | 説明 |
-|----------|----------------------------------------------|
+| 名前       | 説明                                  |
+| ---------- | ------------------------------------- |
 | `OUT_AUTO` | USB と Bluetooth を自動的に切り替える |
-| `OUT_USB` | USB のみ |
-| `OUT_BT` | Bluetooth のみ |
+| `OUT_USB`  | USB のみ                              |
+| `OUT_BT`   | Bluetooth のみ                        |
--- a/docs/ja/feature_tap_dance.md
+++ b/docs/ja/feature_tap_dance.md
@@ -1,9 +1,9 @@
 # タップダンス: 1つのキーが3つ、5つまたは100の異なる動作をします

 <!---
-  original document: 0.9.44:docs/feature_tap_dance.md
-  git diff 0.9.44 HEAD -- docs/feature_tap_dance.md | cat
--> 
+  original document: 0.10.33:docs/feature_tap_dance.md
+  git diff 0.10.33 HEAD -- docs/feature_tap_dance.md | cat
+-->

 ## イントロダクション :id=introduction

@@ -32,7 +32,9 @@
 * `ACTION_TAP_DANCE_LAYER_TOGGLE(kc, layer)`: 1回タップすると `kc` キーコードが送信され、2回タップすると `layer` の状態をトグルします(これは `TG` レイヤーキーコードのように機能します)。
 * `ACTION_TAP_DANCE_FN(fn)`: ユーザーキーマップに定義した指定の関数が呼び出されます。タップダンス実行の回数分タップすると、最後の時点で呼び出されます。
 * `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: タップする度にユーザーキーマップに定義した最初の関数が呼び出されます。タップダンスの実行が終わった時点で2番目の関数が呼び出され、タップダンスの実行をリセットするときに最後の関数が呼び出されます。
-* `ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`: これは `ACTION_TAP_DANCE_FN_ADVANCED` と同じように機能します。しかし、`TAPPING_TERM` で事前に定義した時間に代えて、カスタマイズしたタップ時間を使えます。
+* ~~`ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`~~: これは `ACTION_TAP_DANCE_FN_ADVANCED` 関数と同じように機能します。しかし、`TAPPING_TERM` で事前に定義した時間の代わりに、カスタマイズしたタップ時間を使います。
+    * [ここ](ja/custom_quantum_functions.md#Custom_Tapping_Term)で概説するように、これはキーごとのタッピング時間機能を優先して非推奨になりました。この特定のタップダンス機能を使う代わりに、使いたい特定の `TD()` マクロ(`TD(TD_ESC_CAPS)` のような)を確認する必要があります。
+

 最初のオプションで、1つのキーに2つの役割を持たせる大抵のケースには十分です。例えば、`ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)` は、1回タップすると `Space` を送信し、2回タップすると `Enter` を送信します。

@@ -55,7 +57,7 @@
 異なる場合、まず、古いタップダンスを処理し、続いて新しいタップダンスを登録します。
 同じ場合、カウンタの値を増やし、タイマーをリセットします。

-このことは、あなたは再びキーをタップするまでの時間として `TAPPING_TERM` の時間を持っていることを意味します。そのため、あなたは1つの `TAPPING_TERM` の時間内に全てのタップを行う必要はありません。これにより、キーの反応への影響を最小限に抑えながら、より長いタップ回数を可能にします。 
+このことは、あなたは再びキーをタップするまでの時間として `TAPPING_TERM` の時間を持っていることを意味します。そのため、あなたは1つの `TAPPING_TERM` の時間内に全てのタップを行う必要はありません。これにより、キーの反応への影響を最小限に抑えながら、より長いタップ回数を可能にします。

 次は `matrix_scan_tap_dance()` です。この関数はタップダンスキーのタイムアウトを制御します。

--- a/docs/ja/flashing.md
+++ b/docs/ja/flashing.md
@@ -1,8 +1,8 @@
 # 書き込みの手順とブートローダ情報

 <!---
-  original document: 0.9.10:docs/flashing.md
-  git diff 0.9.10 HEAD -- docs/flashing.md | cat
+  original document: 0.10.33:docs/flashing.md
+  git diff 0.10.33 HEAD -- docs/flashing.md | cat
 -->

 キーボードが使用するブートローダにはかなり多くの種類があり、ほぼ全てが異なる書き込みの方法を使います。幸いなことに、[QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) のようなプロジェクトは、あまり深く考える必要無しに様々なタイプと互換性を持つことを目指していますが、この文章では様々なタイプのブートローダとそれらを書き込むために利用可能な方法について説明します。
@@ -244,3 +244,4 @@ BOOTLOADER = bootloadHID
 * `:dfu-util-split-left` - デフォルトのオプション (`:dfu-util`) と同様に、通常のファームウェアが書き込まれます。ただし、分割キーボードの「左側の」 EEPROM の設定も行われます。
 * `:dfu-util-split-right` - デフォルトのオプション (`:dfu-util`) と同様に、通常のファームウェアが書き込まれます。ただし、分割キーボードの「右側の」 EEPROM の設定も行われます。
 * `:st-link-cli` - dfu-util ではなく、ST-LINK の CLI ユーティリティを介してファームウェアを書き込めます。
+* `:st-flash` - dfu-util ではなく、[STLink Tools](https://github.com/stlink-org/stlink) の `st-flash` ユーティリティを介してファームウェアを書き込めます。
--- a/docs/ja/i2c_driver.md
+++ b/docs/ja/i2c_driver.md
@@ -2,8 +2,8 @@

 <!---
  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
-  original document: 0.8.62:docs/i2c_driver.md
-  git diff 0.8.62 HEAD -- docs/i2c_driver.md | cat
+  original document: 0.10.33:docs/i2c_driver.md
+  git diff 0.10.33 HEAD -- docs/i2c_driver.md | cat
 -->

 QMK で使われる I2C マスタドライバには、MCU 間のポータビリティを提供するための一連の関数が用意されています。
@@ -83,8 +83,8 @@ STM32 MCU では、使用するハードウェアドライバにより、さま
 |-----------------------|--------------------------------------------------------------------------------------------------|---------|
 | `I2C1_SCL_BANK`       | SCL に使うピンのバンク (`GPIOA`, `GPIOB`, `GPIOC`)                                               | `GPIOB` |
 | `I2C1_SDA_BANK`       | SDA に使うピンのバンク (`GPIOA`, `GPIOB`, `GPIOC`)                                               | `GPIOB` |
-| `I2C1_SCL`            | SCL のピン番号 (0-9)                                                                             | `6`     |
-| `I2C1_SDA`            | SDA のピン番号 (0-9)                                                                             | `7`     |
+| `I2C1_SCL`            | SCL のピン番号 (0-15)                                                                            | `6`     |
+| `I2C1_SDA`            | SDA のピン番号 (0-15)                                                                            | `7`     |
 | `I2C1_BANK`（非推奨） | 使用するピンのバンク (`GPIOA`, `GPIOB`, `GPIOC`)。後継は `I2C1_SCL_BANK`, `I2C1_SDA_BANK` です。 | `GPIOB` |

 ChibiOS I2C ドライバの設定項目は STM32 MCU の種類に依存します。
--- a/docs/ja/isp_flashing_guide.md
+++ b/docs/ja/isp_flashing_guide.md
@@ -0,0 +1,284 @@
+# ISP 書き込みガイド
+
+<!---
+  grep --no-filename "^[ ]*git diff" docs/ja/*.md | sh
+  original document: 0.9.46:docs/isp_flashing_guide.md
+  git diff 0.9.46 HEAD -- docs/isp_flashing_guide.md | cat
+-->
+
+ISP 書き込み(ICSP 書き込みと呼ぶ場合もあります)とは、マイクロコントローラーを直接プログラミングするプロセスです。
+これにより、ブートローダを交換したり、コントローラの「ヒューズ」を変更することができ、コントローラの速度や起動方法、その他のオプションなど、多くのハードウェアおよびソフトウェア関連の機能を制御します。
+
+QMK の ISP 書き込みの主な用途は、AVRベースのコントローラ（Pro Micro、または V-USB チップ）のブートローダの書き込みまたは交換です。
+
+?> これは Pro Micro や他の ATmega コントローラなどの AVR ベースのボードをプログラミングするためだけのものです。 Proton C などの Arm コントローラには使用できません。
+
+## 破損したブートローダーの取り扱い
+
+ボードの書き込み/消去で問題が発生し、DFU ベースのコントローラで次のような不可解なエラーメッセージが表示される場合：
+
+    libusb: warning [darwin_transfer_status] transfer error: timed out
+    dfu.c:844: -ETIMEDOUT: Transfer timed out, NAK 0xffffffc4 (-60)
+    atmel.c:1627: atmel_flash: flash data dfu_download failed.
+    atmel.c:1629: Expected message length of 1072, got -60.
+    atmel.c:1434: Error flashing the block: err -2.
+    ERROR
+    Memory write error, use debug for more info.
+    commands.c:360: Error writing memory data. (err -4)
+
+    dfu.c:844: -EPIPE: a) Babble detect or b) Endpoint stalled 0xffffffe0 (-32)
+    Device is write protected.
+    dfu.c:252: dfu_clear_status( 0x7fff4fc2ea80 )
+    atmel.c:1434: Error flashing the block: err -2.
+    ERROR
+    Memory write error, use debug for more info.
+    commands.c:360: Error writing memory data. (err -4)
+
+または、Pro Micro ベースのコントローラに対して次のようなメッセージが表示された場合:
+
+    avrdude: butterfly_recv(): programmer is not responding
+    avrdude: butterfly_recv(): programmer is not responding
+    avrdude: verification error, first mismatch at byte 0x002a
+            0x2b != 0x75
+    avrdude: verification error; content mismatch
+    avrdude: verification error; content mismatch
+
+
+あなたのボード/デバイスを再び動作させるには、ISP 書き込みが必要になるかもしれません。
+
+## 必要なハードウェア
+
+実際に ISP の書き込みを行うには、以下のいずれか（その後に使用するプロトコルが続きます）が必要になります。
+
+* [SparkFun PocketAVR](https://www.sparkfun.com/products/9825) - (USB Tiny)
+* [USBtinyISP AVR Programmer Kit](https://www.adafruit.com/product/46) - (USB Tiny)
+* [Teensy 2.0](https://www.pjrc.com/store/teensy.html) - (avrisp)
+* [Pro Micro](https://www.sparkfun.com/products/12640)  - (avrisp)
+* [Bus Pirate](https://www.adafruit.com/product/237) - (buspirate)
+
+ISP 書き込みに使用できるデバイスは他にもありますが、これらが主なものです。
+また、すべての製品リンクは公式バージョンへのものです。他の場所で入手することもできます。
+
+また、「ISP プログラマ」をプログラミングするデバイスに配線するためのものも必要になります。
+PCB の中には直接使用できる ISP ヘッダがあるものもありますが、そうではない場合が多いので、コントローラ自体にハンダ付けするか、別のスイッチや他のコンポーネントにハンダ付けする必要があるでしょう。
+
+### ISP ファームウェア
+
+Teensy と Pro Micro のコントローラを ISP プログラマとして使用するには、コントローラに ISP ファームウェアを書き込む必要があります。
+それ以外のハードウェアは、あらかじめプログラムされているはずです。
+そのため、これらのコントローラの場合は、正しい hex ファイルをダウンロードしてから書き込んでください。
+
+* Teensy 2.0: [`util/teensy_2.0_ISP_B0.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/teensy_2.0_ISP_B0.hex) (`B0`)
+* Pro Micro: [`util/pro_micro_ISP_B6_10.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/pro_micro_ISP_B6_10.hex) (`10/B6`)
+
+コントローラに書き込んだら、この hex ファイルはもう必要ありません。
+
+## 必要なソフトウェア
+
+QMK ツールボックスは、このほとんど（すべて）に使用することができます。
+
+ただし、Teensy 2.0 ボードを使っている場合は、[Teensy Loader](https:/www.pjrc.comteensyloader.html) を使えば、Teensy 2.0 ボードに書き込むことができます。
+あるいは、`avrdude` (`qmk_install.sh` の一部としてインストールされています) や、[AVRDUDESS](https:/blog.zakkemble.netavrdudess-a-gui-for-avrdude)(Windows 用) を使って、Pro Micro に書き込んだり、ISP を書き込んだりすることができます。
+
+## 配線
+
+これは非常に簡単です。次のようにして、相互に対応するものを接続します。
+
+### SparkFun Pocket AVR
+
+    PocketAVR RST  <-> Keyboard RESET
+    PocketAVR SCLK <-> Keyboard B1 (SCLK)
+    PocketAVR MOSI <-> Keyboard B2 (MOSI)
+    PocketAVR MISO <-> Keyboard B3 (MISO)
+    PocketAVR VCC  <-> Keyboard VCC
+    PocketAVR GND  <-> Keyboard GND
+
+### Teensy 2.0
+
+    Teensy B0  <-> Keyboard RESET
+    Teensy B1  <-> Keyboard B1 (SCLK)
+    Teensy B2  <-> Keyboard B2 (MOSI)
+    Teensy B3  <-> Keyboard B3 (MISO)
+    Teensy VCC <-> Keyboard VCC
+    Teensy GND <-> Keyboard GND
+    
+!> Teensy の B0 ピンはキーボードのコントローラの RESET/RST ピンと配線されています。 Teensy の RESET ピンをキーボードの RESET に配線しないでください。
+
+### Pro Micro
+
+    Pro Micro 10 (B6)  <-> Keyboard RESET
+    Pro Micro 15 (B1)  <-> Keyboard B1 (SCLK)
+    Pro Micro 16 (B2)  <-> Keyboard B2 (MOSI)
+    Pro Micro 14 (B3)  <-> Keyboard B3 (MISO)
+    Pro Micro VCC      <-> Keyboard VCC
+    Pro Micro GND      <-> Keyboard GND
+
+!> Pro Micro の 10/B6 ピンはキーボードのコントローラの RESET/RST ピンに配線されています。 Pro Micro の RESET ピンをキーボードの RESET に配線 ***しないでください***。
+
+## キーボードへの書き込み
+
+ISP プログラマをセットアップして、キーボードに接続したら、キーボードに書き込みをします。
+
+### ブートローダファイル
+
+普通の状態に戻す一番簡単で手っ取り早い方法は、キーボードにブートローダだけ書き込むことです。
+これが終れば、普通にキーボードを接続して、普通にキーボードに書き込みできるようになります。
+
+標準のブートローダは[`util/` フォルダー](https://github.com/qmk/qmk_firmware/tree/master/util) にあります。
+チップの正しいブートローダを書き込んでください:
+
+* **Atmel DFU**
+  * [ATmega16U4](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega16u4_1.0.1.hex)
+  * [ATmega32U4](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1.0.0.hex)
+  * [AT90USB64](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb64_1.0.0.hex)
+  * [AT90USB128](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128_1.0.1.hex)
+* **Caterina**
+  * [Pro Micro (5V/16MHz)](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro16.hex)
+  * [Pro Micro (3.3V/8MHz)](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro8.hex)
+* **BootloadHID (PS2AVRGB)**
+  * [ATmega32A](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_ps2avrgb_bootloadhid_1.0.1.hex)
+
+お使いのボードが何を使っているかわからない場合は、QMK のキーボード用の `rules.mk` ファイルを見てください。
+`MCU` と `BOOTLOADER` の行には必要な値が書かれています。これはボードのバージョンによって異なるかもしれません。
+
+### 製造手法
+
+ブートローダと通常のファームウェアを同時に書き込みたい場合、2つの方法があります。
+手動で行うか、コンパイル時に `:production` ターゲットを使って行うかです。
+
+手動で行うには:
+
+1. オリジナルのファームウェアの .hex ファイルをテキストエディタで開きます
+2. 最後の行を削除してください。(`:00000001FF`になっているはずです - これは EOF メッセージです)
+3. ブートローダの内容全体を新しい行にコピーして(行間に空行を入れないように)、元のファイルの最後に貼り付けてください。
+4. これを新しいファイルとして `<keyboard>_<keymap>_production.hex` という名前で保存します。
+
+?> ここでは他のブートローダも同じように使うことができますが、__ブートローダが必要で__、そうしないとまた ISP を使ってキーボードに新しいファームウェアを書き込まなければならなくなります。
+
+#### QMK DFU ブートローダとプロダクションイメージの作成
+
+コンパイル時に `:production` ターゲットを使用して、ボード用のファームウェア、QMK DFU ブートローダ、プロダクションファームウェアイメージを作成することができます。
+これが完了すると、3つのファイルが表示されます:
+
+* `<keyboard>_<keymap>.hex`
+* `<keyboard>_<keymap>_bootloader.hex`
+* `<keyboard>_<keymap>_production.hex`
+
+QMK DFU ブートローダは `atmega32u4` コントローラ (AVR ベースの Planck ボードや Pro Micro など) でしかテストされておらず、他のコントローラではテストされていません。
+しかし、`atmega32a` や `atmega328p` のような V-USB コントローラでは間違いなく動作しません。
+
+ブートローダかプロダクションファームウェアファイルのどちらかを書き込むことができます。
+プロダクションファームウェアファイルの方が、より多くのデータを書き込むので、書き込みに時間がかかります。
+
+?> 注意：同じブートローダを使用しつづけるべきです。すでに DFU を使用している場合は、QMK DFU に切り替えても問題ありません。しかし、例えば Pro Micro に QMK DFU を書き込むには、追加の手順が必要になります。
+
+## ブートローダ/プロダクションファイルの書き込み
+
+キーボードがどのデバイスにも接続されていないことを確認し、ISP プログラマを接続してください。
+
+ブートローダの種類を変更したい場合は、コマンドラインを使用する必要があります。
+
+### QMK Toolbox
+
+1. 'AVRISP device connected' または `USB Tiny device connected` が黄色で表示されます。
+2. `Open` ダイアログで正しいブートローダー/プロダクションの .hex ファイルを選択します（パスにスペースを含めることはできません）
+3. 書きこもうとしているキーボード（ISP プログラマではなく）のための正しい `Microcontroller` オプションが選択されていることを確認してください。
+4. `Flash` を押します
+5. 特にプロダクションファイルの場合、しばらくは何も出力されませんが、待ちましょう。
+
+検証とヒューズのチェックに問題がなければ、完了です。
+ボードが自動的に再起動する場合があります。
+それ以外の場合は、Teensy のプラグを抜いて、キーボードを接続します。
+テスト中は、Teensy をキーボードに接続したままにすることができますが、すべてが正常に機能することを確認したら、はんだを外すか、配線を外すことをお勧めします。
+
+### コマンドライン
+
+ターミナル（Windows の場合は `cmd`）を開いて、修正した .hex ファイルがある場所に移動します。
+ここでは、このファイルを `main.hex` と呼び、Teensy 2.0 が `COM3` ポートに接続されていると仮定します。
+よくわからない場合は、デバイスマネージャを開いて、`Ports > USB Serial Device` を探してください。ここにある COM ポートを使ってください。
+あなたはそれが正しいポートであることを確認することができます：
+
+    avrdude -c avrisp -P COM3 -p atmega32u4
+
+次のような出力が得られるはずです:
+
+    avrdude: AVR device initialized and ready to accept instructions
+
+    Reading | ################################################## | 100% 0.02s
+
+    avrdude: Device signature = 0x1e9587
+
+    avrdude: safemode: Fuses OK
+
+    avrdude done.  Thank you.
+
+私たちのキーボードは `atmega32u4`（共通）を使用しているので、これが指定するチップです。
+以下が完全なコマンドです：
+
+    avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i
+
+ボードが `atmega32a`（jj40 など）を使用している場合、コマンドは次のとおりです（最後の追加コードによりヒューズが正しく設定されます）。
+
+	avrdude -c avrisp -P COM3 -p atmega32 -U flash:w:main.hex:i -U hfuse:w:0xD0:m -U lfuse:w:0x0F:m
+
+プログレスバーが表示されてから、以下が表示されるはずです。
+
+    avrdude: verifying ...
+    avrdude: 32768 bytes of flash verified
+
+    avrdude: safemode: Fuses OK
+
+    avrdude done.  Thank you.
+
+これは全てうまく動作したことを示しています。
+ボードが自動的に再起動する場合もありますが、そうでない場合は、Teensy のプラグを抜いてキーボードを接続してください。
+テスト中は、Teensy をキーボードに接続したままにすることができますが、すべてが正常に機能することを確認したら、はんだを外すか、配線を外すことをお勧めします。
+
+SparkFun PocketAVR Programmer や、他の USB Tiny ベースの ISP プログラマを使用している場合は、次のようなものを使用すると良いでしょう。
+
+    avrdude -c usbtiny -P usb -p atmega32u4
+
+#### 上級者向け: ヒューズの変更
+
+Pro Micro に QMK DFU を書き込むなど、ブートローダを切り替える場合は、ブートローダの hex ファイルの書き込みに加えて、ヒューズを変更する必要があります。
+これは、`caterina` (Pro Micro ブートローダ) と `dfu` では起動ルーチンの扱いが異なり、その動作はヒューズによって制御されるからです。
+
+!> これは、ヒューズを変更することは、永久にあなたのコントローラをレンガ化(訳注:日本では文鎮化と呼ぶことが多い、コントローラがまったく無反応になる状態)することができる方法の1つであるため、それは非常に注意が必要な1つの領域です。 
+
+以下は、`atmega32u4`の 5V 16MHz 版（5V Pro Micro など）を想定しています。
+
+`atmega32u4`の DFU の場合、必要なヒューズ設定は次のとおりです:
+
+| ヒューズ | 設定             |
+|----------|------------------|
+| Low      | `0x5E`           |
+| High     | `0xD9` or `0x99` |
+| Extended | `0xC3`           |
+
+High ヒューズは 0xD9 か 0x99 のどちらかになります。
+違いは、0xD9 は QMK Firmware がソフトウェアでも無効化している JTAG を無効化しているのに対し、0x99 は JTAG を無効化していないことです。
+
+これを設定するには、`-U lfuse:w:0x5E:m -U hfuse:w:0xD9:m -U efuse:w:0xC3:m` をコマンドに追加します。
+そうすると、最終的なコマンドは次のようになります。
+
+    avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i -U lfuse:w:0x5E:m -U hfuse:w:0xD9:m -U efuse:w:0xC3:m
+
+`atmega32u4`の Caterina では、以下があなたに必要なヒューズの設定です。
+
+| ヒューズ | 設定   |
+|----------|--------|
+| Low      | `0xFF` |
+| High     | `0xD8` |
+| Extended | `0xCB` |
+
+これを設定するには、コマンドに `-U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xCB:m` を追加します。
+これで、最終的なコマンドは次のようになるはずです。
+
+    avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i -U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xCB:m
+
+
+別のコントローラーを使用している場合や、別の設定を希望する場合は、この[AVR ヒューズ計算機](http:/www.engbedded.comfusecalc)を使用して、より適切な値を見つけることができます。
+
+## ヘルプ
+
+ご質問・ご不明な点がありましたら、お気軽に[issue を開いてください](https://github.com/qmk/qmk_firmware/issues/new)！
--- a/docs/ja/ref_functions.md
+++ b/docs/ja/ref_functions.md
@@ -1,8 +1,8 @@
 # キーボードをより良くするための便利なコア関数のリスト

 <!---
-  original document: 0.9.47:docs/ref_functions.md
-  git diff 0.9.47 HEAD -- docs/ref_functions.md | cat
+  original document: 0.10.33:docs/ref_functions.md
+  git diff 0.10.33 HEAD -- docs/ref_functions.md | cat
 -->

 QMK には、信じられないほど便利な、またはあなたが望んでいた機能を少し追加する、隠された関数がたくさんあります。特定の機能に固有の関数はそれぞれの機能のページにあるため、ここには含まれていません。
@@ -48,7 +48,9 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
 ### `update_tri_layer_state(state, x, y, z)`
 もう1つの関数は `update_tri_layer_state(state, x, y, z)` です。この関数は [`layer_state_set_*` 関数](ja/custom_quantum_functions.md#layer-change-code)から呼び出されることを意図しています。これは、キーコードを使ってレイヤーを変更するたびに、これがチェックされることを意味します。したがって、`LT(layer, kc)` を使ってレイヤーを変更すると、同じレイヤーチェックが引き起こされます。

-このメソッドの注意点は、`x` および `y` レイヤーをオンにしないと、`z` レイヤーにアクセスできないことです。レイヤー `z` のみをアクティブにしようとすると、このコードが実行され、使用前にレイヤー `z` がオフになるからです。
+このメソッドの注意点は2つあります:
+1. `x` および `y` レイヤーをオンにしないと、`z` レイヤーにアクセスできません。これは、レイヤー `z` のみをアクティブにしようとすると、このコードが実行され、使用前にレイヤー `z` がオフになるからです。
+2. レイヤーは最上位の番号から処理されるので、`z` は `x` や `y` よりも上位のレイヤーでなければなりません。そうでなければアクセスできない場合があります。

 #### 例

--- a/docs/ja/reference_info_json.md
+++ b/docs/ja/reference_info_json.md
@@ -36,7 +36,7 @@
 * `height`
   * オプション: キー単位でのレイアウトの高さ
 * `key_count`
-   * **必須**: このレイアウトのキーの数
+   * オプション: このレイアウトのキーの数
 * `layout`
   * 物理レイアウトを説明するキー辞書のリスト。詳細は次のセクションを見てください。

--- a/docs/mod_tap.md
+++ b/docs/mod_tap.md
@@ -27,22 +27,25 @@ This key would activate Left Control and Left Shift when held, and send Escape w

 For convenience, QMK includes some Mod-Tap shortcuts to make common combinations more compact in your keymap:

-|Key         |Aliases                                                          |Description                                            |
-|------------|-----------------------------------------------------------------|-------------------------------------------------------|
-|`LCTL_T(kc)`|`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped               |
-|`LSFT_T(kc)`|`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                 |
-|`LALT_T(kc)`|`LOPT_T(kc)`, `ALT_T(kc)`, `OPT_T(kc)`                           |Left Alt when held, `kc` when tapped                   |
-|`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                   |
-|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped              |
-|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                |
-|`RALT_T(kc)`|`ROPT_T(kc)`, `ALGR_T(kc)`                                       |Right Alt when held, `kc` when tapped                  |
-|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                  |
-|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped         |
-|`LCA_T(kc)` |                                                                 |Left Control and Alt when held, `kc` when tapped       |
-|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped  |
-|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped |
-|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped     |
-|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped|
+|Key         |Aliases                                                          |Description                                                   |
+|------------|-----------------------------------------------------------------|--------------------------------------------------------------|
+|`LCTL_T(kc)`|`CTL_T(kc)`                                                      |Left Control when held, `kc` when tapped                      |
+|`LSFT_T(kc)`|`SFT_T(kc)`                                                      |Left Shift when held, `kc` when tapped                        |
+|`LALT_T(kc)`|`LOPT_T(kc)`, `ALT_T(kc)`, `OPT_T(kc)`                           |Left Alt when held, `kc` when tapped                          |
+|`LGUI_T(kc)`|`LCMD_T(kc)`, `LWIN_T(kc)`, `GUI_T(kc)`, `CMD_T(kc)`, `WIN_T(kc)`|Left GUI when held, `kc` when tapped                          |
+|`RCTL_T(kc)`|                                                                 |Right Control when held, `kc` when tapped                     |
+|`RSFT_T(kc)`|                                                                 |Right Shift when held, `kc` when tapped                       |
+|`RALT_T(kc)`|`ROPT_T(kc)`, `ALGR_T(kc)`                                       |Right Alt when held, `kc` when tapped                         |
+|`RGUI_T(kc)`|`RCMD_T(kc)`, `RWIN_T(kc)`                                       |Right GUI when held, `kc` when tapped                         |
+|`SGUI_T(kc)`|`SCMD_T(kc)`, `SWIN_T(kc)`                                       |Left Shift and GUI when held, `kc` when tapped                |
+|`LCA_T(kc)` |                                                                 |Left Control and Alt when held, `kc` when tapped              |
+|`LSA_T(kc)` |                                                                 |Left Shift and Alt when held, `kc` when tapped                |
+|`RSA_T(kc)` |`SAGR_T(kc)`                                                     |Right Shift and Right Alt (AltGr) when held, `kc` when tapped |
+|`RCS_T(kc)` |                                                                 |Right Control and Right Shift when held, `kc` when tapped     |
+|`LCAG_T(kc)`|                                                                 |Left Control, Alt and GUI when held, `kc` when tapped         |
+|`RCAG_T(kc)`|                                                                 |Right Control, Alt and GUI when held, `kc` when tapped        |
+|`C_S_T(kc)` |                                                                 |Left Control and Shift when held, `kc` when tapped            |
+|`MEH_T(kc)` |                                                                 |Left Control, Shift and Alt when held, `kc` when tapped       |
 |`HYPR_T(kc)`|`ALL_T(kc)`                                                      |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)|

 ## Caveats
--- a/docs/reference_info_json.md
+++ b/docs/reference_info_json.md
@@ -31,7 +31,7 @@ Within our `info.json` file the `layouts` portion of the dictionary contains sev
 * `height`
  * Optional: The height of the layout in Key Units
 * `key_count`
-  * **Required**: The number of keys in this layout
+  * Optional: The number of keys in this layout
 * `layout`
  * A list of Key Dictionaries describing the physical layout. See the next section for more details.

--- a/drivers/issi/is31fl3741.c
+++ b/drivers/issi/is31fl3741.c
@@ -97,14 +97,13 @@ bool IS31FL3741_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
    IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM0);

    for (int i = 0; i < 342; i += 18) {
-        g_twi_transfer_buffer[0] = i % 180;
-
        if (i == 180) {
            // unlock the command register and select PG2
            IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
            IS31FL3741_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM1);
        }

+        g_twi_transfer_buffer[0] = i % 180;
        memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 18);

 #if ISSI_PERSISTENCE > 0
@@ -251,4 +250,6 @@ void IS31FL3741_set_scaling_registers(const is31_led *pled, uint8_t red, uint8_t
    g_scaling_registers[pled->driver][pled->r] = red;
    g_scaling_registers[pled->driver][pled->g] = green;
    g_scaling_registers[pled->driver][pled->b] = blue;
+
+    g_scaling_registers_update_required[pled->driver] = true;
 }
--- a/drivers/issi/is31fl3741.h
+++ b/drivers/issi/is31fl3741.h
@@ -23,14 +23,13 @@
 #include <stdbool.h>

 typedef struct is31_led {
-    uint8_t  driver : 2;
-    uint16_t r;
-    uint16_t g;
-    uint16_t b;
+    uint32_t driver : 2;
+    uint32_t r : 10;
+    uint32_t g : 10;
+    uint32_t b : 10;
 } __attribute__((packed)) is31_led;

 extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
-extern const is31_led g_is31_indicator_leds[DRIVER_INDICATOR_LED_TOTAL];

 void IS31FL3741_init(uint8_t addr);
 void IS31FL3741_write_register(uint8_t addr, uint8_t reg, uint8_t data);
--- a/drivers/oled/oled_driver.c
+++ b/drivers/oled/oled_driver.c
@@ -75,8 +75,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define CHARGE_PUMP 0x8D

 // Misc defines
-#define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8)
-#define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)
+#ifndef OLED_BLOCK_COUNT
+#    define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8)
+#endif
+#ifndef OLED_BLOCK_SIZE
+#    define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT)
+#endif
+
+#define OLED_ALL_BLOCKS_MASK (((((OLED_BLOCK_TYPE)1 << (OLED_BLOCK_COUNT - 1)) - 1) << 1) | 1)

 // i2c defines
 #define I2C_CMD 0x00
@@ -212,7 +218,7 @@ __attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) {
 void oled_clear(void) {
    memset(oled_buffer, 0, sizeof(oled_buffer));
    oled_cursor = &oled_buffer[0];
-    oled_dirty  = -1;  // -1 will be max value as long as display_dirty is unsigned type
+    oled_dirty  = OLED_ALL_BLOCKS_MASK;
 }

 static void calc_bounds(uint8_t update_start, uint8_t *cmd_array) {
@@ -262,13 +268,14 @@ static void rotate_90(const uint8_t *src, uint8_t *dest) {

 void oled_render(void) {
    // Do we have work to do?
+    oled_dirty &= OLED_ALL_BLOCKS_MASK;
    if (!oled_dirty || oled_scrolling) {
        return;
    }

    // Find first dirty block
    uint8_t update_start = 0;
-    while (!(oled_dirty & (1 << update_start))) {
+    while (!(oled_dirty & ((OLED_BLOCK_TYPE)1 << update_start))) {
        ++update_start;
    }

@@ -314,7 +321,7 @@ void oled_render(void) {
    oled_on();

    // Clear dirty flag
-    oled_dirty &= ~(1 << update_start);
+    oled_dirty &= ~((OLED_BLOCK_TYPE)1 << update_start);
 }

 void oled_set_cursor(uint8_t col, uint8_t line) {
@@ -404,9 +411,9 @@ void oled_write_char(const char data, bool invert) {
    // Dirty check
    if (memcmp(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH)) {
        uint16_t index = oled_cursor - &oled_buffer[0];
-        oled_dirty |= (1 << (index / OLED_BLOCK_SIZE));
+        oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE));
        // Edgecase check if the written data spans the 2 chunks
-        oled_dirty |= (1 << ((index + OLED_FONT_WIDTH) / OLED_BLOCK_SIZE));
+        oled_dirty |= ((OLED_BLOCK_TYPE)1 << ((index + OLED_FONT_WIDTH - 1) / OLED_BLOCK_SIZE));
    }

    // Finally move to the next char
@@ -441,7 +448,7 @@ void oled_pan(bool left) {
            }
        }
    }
-    oled_dirty = ~((OLED_BLOCK_TYPE)0);
+    oled_dirty = OLED_ALL_BLOCKS_MASK;
 }

 oled_buffer_reader_t oled_read_raw(uint16_t start_index) {
@@ -456,7 +463,7 @@ void oled_write_raw_byte(const char data, uint16_t index) {
    if (index > OLED_MATRIX_SIZE) index = OLED_MATRIX_SIZE;
    if (oled_buffer[index] == data) return;
    oled_buffer[index] = data;
-    oled_dirty |= (1 << (index / OLED_BLOCK_SIZE));
+    oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE));
 }

 void oled_write_raw(const char *data, uint16_t size) {
@@ -464,21 +471,28 @@ void oled_write_raw(const char *data, uint16_t size) {
    for (uint16_t i = 0; i < size; i++) {
        if (oled_buffer[i] == data[i]) continue;
        oled_buffer[i] = data[i];
-        oled_dirty |= (1 << (i / OLED_BLOCK_SIZE));
+        oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE));
    }
 }

 void oled_write_pixel(uint8_t x, uint8_t y, bool on) {
-    if (x >= OLED_DISPLAY_WIDTH || y >= OLED_DISPLAY_HEIGHT) {
+    if (x >= oled_rotation_width) {
        return;
    }
-    uint16_t index = x + (y / 8) * OLED_DISPLAY_WIDTH;
-    if (on) {
-        oled_buffer[index] |= (1 << (y % 8));
-    } else {
-        oled_buffer[index] &= ~(1 << (y % 8));
+    uint16_t index = x + (y / 8) * oled_rotation_width;
+    if (index >= OLED_MATRIX_SIZE) {
+        return;
+    }
+    uint8_t data = oled_buffer[index];
+    if (on) {
+        data |= (1 << (y % 8));
+    } else {
+        data &= ~(1 << (y % 8));
+    }
+    if (oled_buffer[index] != data) {
+        oled_buffer[index] = data;
+        oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE));
    }
-    oled_dirty |= (1 << (index / OLED_BLOCK_SIZE));
 }

 #if defined(__AVR__)
@@ -501,7 +515,7 @@ void oled_write_raw_P(const char *data, uint16_t size) {
        uint8_t c = pgm_read_byte(data++);
        if (oled_buffer[i] == c) continue;
        oled_buffer[i] = c;
-        oled_dirty |= (1 << (i / OLED_BLOCK_SIZE));
+        oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE));
    }
 }
 #endif  // defined(__AVR__)
@@ -597,7 +611,7 @@ bool oled_scroll_off(void) {
            return oled_scrolling;
        }
        oled_scrolling = false;
-        oled_dirty     = -1;
+        oled_dirty     = OLED_ALL_BLOCKS_MASK;
    }
    return !oled_scrolling;
 }
--- a/keyboards/40percentclub/nein/config.h
+++ b/keyboards/40percentclub/nein/config.h
@@ -19,8 +19,8 @@
 #include "config_common.h"

 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x0A0C
+#define VENDOR_ID       0x3430 // "40"
+#define PRODUCT_ID      0x9999
 #define DEVICE_VER      0x9999
 #define MANUFACTURER    di0ib
 #define PRODUCT         The nein Keyboard
--- a/keyboards/40percentclub/nein/info.json
+++ b/keyboards/40percentclub/nein/info.json
@@ -1,6 +1,6 @@
 {
  "keyboard_name": "nein",
-  "url": "",
+  "url": "http://www.40percent.club/2019/04/nein.html",
  "maintainer": "qmk",
  "width": 3,
  "height": 3,
--- a/keyboards/40percentclub/nein/keymaps/via/keymap.c
+++ b/keyboards/40percentclub/nein/keymaps/via/keymap.c
@@ -0,0 +1,39 @@
+/* Copyright 2019
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_ortho_3x3(
+        KC_MUTE, KC_HOME, KC_MPLY,
+        MO(1),   KC_UP,   KC_END,
+        KC_LEFT, KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT_ortho_3x3(
+        RESET,   _______, KC_STOP,
+        _______, _______, RGB_MOD,
+        KC_MPRV, _______, KC_MNXT
+    ),
+    [2] = LAYOUT_ortho_3x3(
+        _______, _______, _______,
+        _______, _______, _______,
+        _______, _______, _______
+    ),
+    [3] = LAYOUT_ortho_3x3(
+        _______, _______, _______,
+        _______, _______, _______,
+        _______, _______, _______
+    ),
+};
--- a/keyboards/40percentclub/nein/keymaps/via/rules.mk
+++ b/keyboards/40percentclub/nein/keymaps/via/rules.mk
@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes
--- a/keyboards/aeboards/ext65/rev2/bootloader_defs.h
+++ b/keyboards/aeboards/ext65/rev2/bootloader_defs.h
@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
--- a/keyboards/ai03/soyuz/keymaps/mrsendyyk/readme.md
+++ b/keyboards/ai03/soyuz/keymaps/mrsendyyk/readme.md
@@ -1,19 +0,0 @@
-# Sendy YK's Numpad 5x4 Layout and Keymap
-
-[https://mr.sendyyk.com](https://mr.sendyyk.com)
-
-## Numpad 5x4 Layout
-
-![LAYOUT_numpad_5x4](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/soyuz/assets/layout-numpad-5x4.png)
-
-## Keymap
-
-![_BASE](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/soyuz/assets/layout-numpad-5x4-keymap.png)
-
-## Build The Firmware
-
-You will need to build the firmware. To do so go to your terminal window and run the compile command:
-
-    qmk compile -kb ai03/soyuz -km mrsendyyk
-
-See [The Complete Newbs Guide To QMK](https://docs.qmk.fm/#/newbs).
--- a/keyboards/ai03/vega/bootloader_defs.h
+++ b/keyboards/ai03/vega/bootloader_defs.h
@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
--- a/keyboards/barleycorn/keymaps/via/readme.md
+++ b/keyboards/barleycorn/keymaps/via/readme.md
@@ -1,3 +1 @@
 # Compile with this keymap to use VIA
-
-Sadly right now when using VIA, extrakeys is disabled. This means volume control will not work.
--- a/keyboards/barleycorn/keymaps/via/rules.mk
+++ b/keyboards/barleycorn/keymaps/via/rules.mk
@@ -1,3 +1 @@
 VIA_ENABLE = yes
-MOUSEKEY_ENABLE = no
-EXTRAKEY_ENABLE = no
--- a/keyboards/basekeys/slice/rev1_rgb/info.json
+++ b/keyboards/basekeys/slice/rev1_rgb/info.json
@@ -1,15 +1,18 @@
 {
-    "keyboard_name": "slice", 
-    "url": "https://www.basekeys.com", 
-    "maintainer": "2Moons", 
-    "width": 17.72, 
-    "height": 5, 
+    "keyboard_name": "slice",
+    "url": "https://www.basekeys.com",
+    "maintainer": "2Moons",
+    "width": 17.72,
+    "height": 5,
    "layouts": {
        "LAYOUT": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.6600000000000001, "y":0}, {"label":"!", "x":2.66, "y":0}, {"label":"@", "x":3.66, "y":0}, {"label":"#", "x":4.66, "y":0}, {"label":"$", "x":5.66, "y":0}, {"label":"%", "x":6.66, "y":0}, {"label":"^", "x":7.66, "y":0}, {"label":"&", "x":9.32, "y":0}, {"label":"*", "x":10.32, "y":0}, {"label":"(", "x":11.32, "y":0}, {"label":")", "x":12.32, "y":0}, {"label":"_", "x":13.32, "y":0}, {"label":"+", "x":14.32, "y":0}, {"label":"Backspace", "x":15.32, "y":0, "w":2}, {"x":0, "y":1}, {"label":"Tab", "x":1.53, "y":1, "w":1.5}, {"label":"Q", "x":3.03, "y":1}, {"label":"W", "x":4.03, "y":1}, {"label":"E", "x":5.03, "y":1}, {"label":"R", "x":6.03, "y":1}, {"label":"T", "x":7.03, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15.05, "y":1}, {"label":"|", "x":16.1, "y":1, "w":1.5}, {"x":0, "y":2}, {"label":"Caps Lock", "x":1.3900000000000001, "y":2, "w":1.75}, {"label":"A", "x":3.14, "y":2}, {"label":"S", "x":4.14, "y":2}, {"label":"D", "x":5.14, "y":2}, {"label":"F", "x":6.14, "y":2}, {"label":"G", "x":7.14, "y":2}, {"label":"H", "x":9.34, "y":2}, {"label":"J", "x":10.34, "y":2}, {"label":"K", "x":11.34, "y":2}, {"label":"L", "x":12.34, "y":2}, {"label":":", "x":13.34, "y":2}, {"label":"\"", "x":14.34, "y":2}, {"label":"Enter", "x":15.34, "y":2, "w":2.25}, {"x":0, "y":3}, {"label":"Shift", "x":1.25, "y":3, "w":2.25}, {"label":"Z", "x":3.5, "y":3}, {"label":"X", "x":4.5, "y":3}, {"label":"C", "x":5.5, "y":3}, {"label":"V", "x":6.5, "y":3}, {"label":"B", "x":7.5, "y":3}, {"label":"B", "x":8.97, "y":3}, {"label":"N", "x":9.97, "y":3}, {"label":"M", "x":10.97, "y":3}, {"label":"<", "x":11.97, "y":3}, {"label":">", "x":12.97, "y":3}, {"label":"?", "x":13.97, "y":3}, {"label":"Shift", "x":14.97, "y":3, "w":1.75}, {"label":"Shift", "x":16.72, "y":3}, {"x":0, "y":4}, {"label":"Ctrl", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.25}, {"label":"\u21d3", "x":4.75, "y":4}, {"x":5.75, "y":4, "w":2.75}, {"x":8.97, "y":4, "w":2.25}, {"label":"\u21d1", "x":11.22, "y":4}, {"label":"Alt", "x":13.98, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.23, "y":4, "w":1.25}, {"label":"Fn", "x":16.48, "y":4}]
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.660, "y":0}, {"label":"!", "x":2.66, "y":0}, {"label":"@", "x":3.66, "y":0}, {"label":"#", "x":4.66, "y":0}, {"label":"$", "x":5.66, "y":0}, {"label":"%", "x":6.66, "y":0}, {"label":"^", "x":7.66, "y":0}, {"label":"&", "x":9.32, "y":0}, {"label":"*", "x":10.32, "y":0}, {"label":"(", "x":11.32, "y":0}, {"label":")", "x":12.32, "y":0}, {"label":"_", "x":13.32, "y":0}, {"label":"+", "x":14.32, "y":0}, {"label":"Backspace", "x":15.32, "y":0, "w":2}, {"x":0, "y":1}, {"label":"Tab", "x":1.53, "y":1, "w":1.5}, {"label":"Q", "x":3.03, "y":1}, {"label":"W", "x":4.03, "y":1}, {"label":"E", "x":5.03, "y":1}, {"label":"R", "x":6.03, "y":1}, {"label":"T", "x":7.03, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15.05, "y":1}, {"label":"|", "x":16.1, "y":1, "w":1.5}, {"x":0, "y":2}, {"label":"Caps Lock", "x":1.390, "y":2, "w":1.75}, {"label":"A", "x":3.14, "y":2}, {"label":"S", "x":4.14, "y":2}, {"label":"D", "x":5.14, "y":2}, {"label":"F", "x":6.14, "y":2}, {"label":"G", "x":7.14, "y":2}, {"label":"H", "x":9.34, "y":2}, {"label":"J", "x":10.34, "y":2}, {"label":"K", "x":11.34, "y":2}, {"label":"L", "x":12.34, "y":2}, {"label":":", "x":13.34, "y":2}, {"label":"\"", "x":14.34, "y":2}, {"label":"Enter", "x":15.34, "y":2, "w":2.25}, {"x":0, "y":3}, {"label":"Shift", "x":1.25, "y":3, "w":2.25}, {"label":"Z", "x":3.5, "y":3}, {"label":"X", "x":4.5, "y":3}, {"label":"C", "x":5.5, "y":3}, {"label":"V", "x":6.5, "y":3}, {"label":"B", "x":7.5, "y":3}, {"label":"B", "x":8.97, "y":3}, {"label":"N", "x":9.97, "y":3}, {"label":"M", "x":10.97, "y":3}, {"label":"<", "x":11.97, "y":3}, {"label":">", "x":12.97, "y":3}, {"label":"?", "x":13.97, "y":3}, {"label":"Shift", "x":14.97, "y":3, "w":1.75}, {"label":"Shift", "x":16.72, "y":3}, {"x":0, "y":4}, {"label":"Ctrl", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.25}, {"label":"\u21d3", "x":4.75, "y":4}, {"x":5.75, "y":4, "w":2.75}, {"x":8.97, "y":4, "w":2.25}, {"label":"\u21d1", "x":11.22, "y":4}, {"label":"Alt", "x":13.98, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.23, "y":4, "w":1.25}, {"label":"Fn", "x":16.48, "y":4}]
        },
-       "LAYOUT_split_left_space": {
-            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.6600000000000001, "y":0}, {"label":"!", "x":2.66, "y":0}, {"label":"@", "x":3.66, "y":0}, {"label":"#", "x":4.66, "y":0}, {"label":"$", "x":5.66, "y":0}, {"label":"%", "x":6.66, "y":0}, {"label":"^", "x":7.66, "y":0}, {"label":"&", "x":9.32, "y":0}, {"label":"*", "x":10.32, "y":0}, {"label":"(", "x":11.32, "y":0}, {"label":")", "x":12.32, "y":0}, {"label":"_", "x":13.32, "y":0}, {"label":"+", "x":14.32, "y":0}, {"label":"Backspace", "x":15.32, "y":0, "w":2}, {"x":0, "y":1}, {"label":"Tab", "x":1.53, "y":1, "w":1.5}, {"label":"Q", "x":3.03, "y":1}, {"label":"W", "x":4.03, "y":1}, {"label":"E", "x":5.03, "y":1}, {"label":"R", "x":6.03, "y":1}, {"label":"T", "x":7.03, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15.05, "y":1}, {"label":"|", "x":16.1, "y":1, "w":1.5}, {"x":0, "y":2}, {"label":"Caps Lock", "x":1.3900000000000001, "y":2, "w":1.75}, {"label":"A", "x":3.14, "y":2}, {"label":"S", "x":4.14, "y":2}, {"label":"D", "x":5.14, "y":2}, {"label":"F", "x":6.14, "y":2}, {"label":"G", "x":7.14, "y":2}, {"label":"H", "x":9.34, "y":2}, {"label":"J", "x":10.34, "y":2}, {"label":"K", "x":11.34, "y":2}, {"label":"L", "x":12.34, "y":2}, {"label":":", "x":13.34, "y":2}, {"label":"\"", "x":14.34, "y":2}, {"label":"Enter", "x":15.34, "y":2, "w":2.25}, {"x":0, "y":3}, {"label":"Shift", "x":1.25, "y":3, "w":2.25}, {"label":"Z", "x":3.5, "y":3}, {"label":"X", "x":4.5, "y":3}, {"label":"C", "x":5.5, "y":3}, {"label":"V", "x":6.5, "y":3}, {"label":"B", "x":7.5, "y":3}, {"label":"B", "x":8.97, "y":3}, {"label":"N", "x":9.97, "y":3}, {"label":"M", "x":10.97, "y":3}, {"label":"<", "x":11.97, "y":3}, {"label":">", "x":12.97, "y":3}, {"label":"?", "x":13.97, "y":3}, {"label":"Shift", "x":14.97, "y":3, "w":1.75}, {"label":"Shift", "x":16.72, "y":3}, {"x":0, "y":4}, {"label":"Ctrl", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.25}, {"label":"\u21d3", "x":4.75, "y":4}, {"x":5.75, "y":4, "w":1.75}, {"x":7.5, "y":4}, {"x":8.97, "y":4, "w":2.25}, {"label":"\u21d1", "x":11.22, "y":4}, {"label":"Alt", "x":13.98, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.23, "y":4, "w":1.25}, {"label":"Fn", "x":16.48, "y":4}]
+        "LAYOUT_split_left_space": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.660, "y":0}, {"label":"!", "x":2.66, "y":0}, {"label":"@", "x":3.66, "y":0}, {"label":"#", "x":4.66, "y":0}, {"label":"$", "x":5.66, "y":0}, {"label":"%", "x":6.66, "y":0}, {"label":"^", "x":7.66, "y":0}, {"label":"&", "x":9.32, "y":0}, {"label":"*", "x":10.32, "y":0}, {"label":"(", "x":11.32, "y":0}, {"label":")", "x":12.32, "y":0}, {"label":"_", "x":13.32, "y":0}, {"label":"+", "x":14.32, "y":0}, {"label":"Backspace", "x":15.32, "y":0, "w":2}, {"x":0, "y":1}, {"label":"Tab", "x":1.53, "y":1, "w":1.5}, {"label":"Q", "x":3.03, "y":1}, {"label":"W", "x":4.03, "y":1}, {"label":"E", "x":5.03, "y":1}, {"label":"R", "x":6.03, "y":1}, {"label":"T", "x":7.03, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15.05, "y":1}, {"label":"|", "x":16.1, "y":1, "w":1.5}, {"x":0, "y":2}, {"label":"Caps Lock", "x":1.390, "y":2, "w":1.75}, {"label":"A", "x":3.14, "y":2}, {"label":"S", "x":4.14, "y":2}, {"label":"D", "x":5.14, "y":2}, {"label":"F", "x":6.14, "y":2}, {"label":"G", "x":7.14, "y":2}, {"label":"H", "x":9.34, "y":2}, {"label":"J", "x":10.34, "y":2}, {"label":"K", "x":11.34, "y":2}, {"label":"L", "x":12.34, "y":2}, {"label":":", "x":13.34, "y":2}, {"label":"\"", "x":14.34, "y":2}, {"label":"Enter", "x":15.34, "y":2, "w":2.25}, {"x":0, "y":3}, {"label":"Shift", "x":1.25, "y":3, "w":2.25}, {"label":"Z", "x":3.5, "y":3}, {"label":"X", "x":4.5, "y":3}, {"label":"C", "x":5.5, "y":3}, {"label":"V", "x":6.5, "y":3}, {"label":"B", "x":7.5, "y":3}, {"label":"B", "x":8.97, "y":3}, {"label":"N", "x":9.97, "y":3}, {"label":"M", "x":10.97, "y":3}, {"label":"<", "x":11.97, "y":3}, {"label":">", "x":12.97, "y":3}, {"label":"?", "x":13.97, "y":3}, {"label":"Shift", "x":14.97, "y":3, "w":1.75}, {"label":"Shift", "x":16.72, "y":3}, {"x":0, "y":4}, {"label":"Ctrl", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.25}, {"label":"\u21d3", "x":4.75, "y":4}, {"x":5.75, "y":4, "w":1.75}, {"x":7.5, "y":4}, {"x":8.97, "y":4, "w":2.25}, {"label":"\u21d1", "x":11.22, "y":4}, {"label":"Alt", "x":13.98, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.23, "y":4, "w":1.25}, {"label":"Fn", "x":16.48, "y":4}]
+        },
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.660, "y":0}, {"label":"!", "x":2.66, "y":0}, {"label":"@", "x":3.66, "y":0}, {"label":"#", "x":4.66, "y":0}, {"label":"$", "x":5.66, "y":0}, {"label":"%", "x":6.66, "y":0}, {"label":"^", "x":7.66, "y":0}, {"label":"&", "x":9.32, "y":0}, {"label":"*", "x":10.32, "y":0}, {"label":"(", "x":11.32, "y":0}, {"label":")", "x":12.32, "y":0}, {"label":"_", "x":13.32, "y":0}, {"label":"+", "x":14.32, "y":0}, {"label":"Backspace", "x":15.32, "y":0, "w":2}, {"x":0, "y":1}, {"label":"Tab", "x":1.53, "y":1, "w":1.5}, {"label":"Q", "x":3.03, "y":1}, {"label":"W", "x":4.03, "y":1}, {"label":"E", "x":5.03, "y":1}, {"label":"R", "x":6.03, "y":1}, {"label":"T", "x":7.03, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15.05, "y":1}, {"label":"|", "x":16.1, "y":1, "w":1.5}, {"x":0, "y":2}, {"label":"Caps Lock", "x":1.390, "y":2, "w":1.75}, {"label":"A", "x":3.14, "y":2}, {"label":"S", "x":4.14, "y":2}, {"label":"D", "x":5.14, "y":2}, {"label":"F", "x":6.14, "y":2}, {"label":"G", "x":7.14, "y":2}, {"label":"H", "x":9.34, "y":2}, {"label":"J", "x":10.34, "y":2}, {"label":"K", "x":11.34, "y":2}, {"label":"L", "x":12.34, "y":2}, {"label":":", "x":13.34, "y":2}, {"label":"\"", "x":14.34, "y":2}, {"label":"Enter", "x":15.34, "y":2, "w":2.25}, {"x":0, "y":3}, {"label":"Shift", "x":1.25, "y":3, "w":2.25}, {"label":"Z", "x":3.5, "y":3}, {"label":"X", "x":4.5, "y":3}, {"label":"C", "x":5.5, "y":3}, {"label":"V", "x":6.5, "y":3}, {"label":"B", "x":7.5, "y":3}, {"label":"B", "x":8.97, "y":3}, {"label":"N", "x":9.97, "y":3}, {"label":"M", "x":10.97, "y":3}, {"label":"<", "x":11.97, "y":3}, {"label":">", "x":12.97, "y":3}, {"label":"?", "x":13.97, "y":3}, {"label":"Shift", "x":14.97, "y":3, "w":1.75}, {"label":"Shift", "x":16.72, "y":3}, {"x":0, "y":4}, {"label":"Ctrl", "x":1.5, "y":4, "w":1.25}, {"label":"Alt", "x":2.75, "y":4, "w":1.25}, {"label":"\u21d3", "x":4.75, "y":4}, {"x":5.75, "y":4, "w":0.917}, {"x":6.667, "y":4, "w":0.916}, {"x":7.583, "y":4, "w":0.917}, {"x":8.97, "y":4, "w":2.25}, {"label":"\u21d1", "x":11.22, "y":4}, {"label":"Alt", "x":13.98, "y":4, "w":1.25}, {"label":"Ctrl", "x":15.23, "y":4, "w":1.25}, {"label":"Fn", "x":16.48, "y":4}]
        }
    }
-}
+}
--- a/keyboards/basekeys/slice/rev1_rgb/keymaps/via/keymap.c
+++ b/keyboards/basekeys/slice/rev1_rgb/keymaps/via/keymap.c
@@ -0,0 +1,127 @@
+/* Copyright 2020 2Moons
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "split_util.h"
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+enum layer_number {
+  _QWERTY,
+  _FN,
+  _LOWER,
+  _RAISE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_QWERTY] = LAYOUT_all(
+  //,------------------------------------------------------------------------|   |---------------------------------------------------------------------------.
+       KC_ESC, KC_GRAVE,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,        KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL,      KC_BSPACE,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+       RGB_MODE_FORWARD,  KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,        KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC,   KC_RBRC,   KC_BSLS,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+      RGB_MODE_GRADIENT, KC_CAPS,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,        KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,        KC_ENT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+          RGB_MODE_XMAS, KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,        KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,   KC_RSFT,   KC_RSFT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+                RGB_TOG, KC_LCTL, KC_LALT, KC_LALT,  KC_SPC,  KC_SPC,  KC_SPC,      KC_SPC,  KC_SPC,                            KC_RALT,   KC_RCTL,   MO(_FN)
+  //`------------------------------------------------------------------------|   |---------------------------------------------------------------------------'
+  ),
+
+  [_FN] = LAYOUT_all(
+  //,-------------------------------------------------------------------------|   |---------------------------------------------------------------------------.
+       KC_ESC,  KC_GRAVE,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,       KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12,      KC_BSPACE,
+  //|-------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+      _______,            _______, _______, _______, _______, _______, _______,     _______, KC_PSCR, KC_SLCK, KC_PAUSE,  KC_UP, _______,   _______,   _______,
+  //|-------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+      _______,            _______, _______, _______, _______, _______, _______,     _______, KC_HOME, KC_PGUP, KC_LEFT,KC_RIGHT, _______,       _______,
+  //|-------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+      _______,            _______, _______, _______, _______, _______, _______,     _______,  KC_END, KC_PGDN, KC_DOWN, _______, _______,   _______,   _______,
+  //|-------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+      _______,            _______, _______, _______, _______, _______, _______,     _______, _______,                            _______,   _______,   _______
+  //`-------------------------------------------------------------------------|   |---------------------------------------------------------------------------'
+  ),
+
+  [_LOWER] = LAYOUT_all(
+  //,------------------------------------------------------------------------|   |---------------------------------------------------------------------------.
+       KC_ESC, KC_GRAVE,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,        KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL,      KC_BSPACE,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+       RGB_MODE_FORWARD,  KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,        KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC,   KC_RBRC,   KC_BSLS,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+      RGB_MODE_GRADIENT, KC_CAPS,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,        KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,        KC_ENT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+          RGB_MODE_XMAS, KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,        KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,   KC_RSFT,   KC_RSFT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+                RGB_TOG, KC_LCTL, KC_LALT, KC_LALT,  KC_SPC,  KC_SPC,  KC_SPC,      KC_SPC,  KC_SPC,                            KC_RALT,   KC_RCTL,   MO(_FN)
+  //`------------------------------------------------------------------------|   |---------------------------------------------------------------------------'
+  ),
+
+  [_RAISE] = LAYOUT_all(
+  //,------------------------------------------------------------------------|   |---------------------------------------------------------------------------.
+       KC_ESC, KC_GRAVE,    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,        KC_7,    KC_8,    KC_9,    KC_0, KC_MINS,  KC_EQL,      KC_BSPACE,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+       RGB_MODE_FORWARD,  KC_TAB,    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,        KC_Y,    KC_U,    KC_I,    KC_O,    KC_P, KC_LBRC,   KC_RBRC,   KC_BSLS,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+      RGB_MODE_GRADIENT, KC_CAPS,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,        KC_H,    KC_J,    KC_K,    KC_L, KC_SCLN, KC_QUOT,        KC_ENT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+          RGB_MODE_XMAS, KC_LSFT,    KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,        KC_B,    KC_N,    KC_M, KC_COMM,  KC_DOT, KC_SLSH,   KC_RSFT,   KC_RSFT,
+  //|------------------+--------+--------+--------+--------+--------+--------|   |--------+--------+--------+--------+--------+--------+----------+----------|
+                RGB_TOG, KC_LCTL, KC_LALT, KC_LALT,  KC_SPC,  KC_SPC,  KC_SPC,       KC_SPC,  KC_SPC,                            KC_RALT,   KC_RCTL,   MO(_FN)
+  //`------------------------------------------------------------------------|   |---------------------------------------------------------------------------'
+  )
+};
+
+#ifdef OLED_DRIVER_ENABLE
+
+static void render_qmk_logo(void) {
+    static const char PROGMEM qmk_logo[] = {
+        0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
+        0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
+        0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
+        0};
+    oled_write_P(qmk_logo, false);
+}
+
+oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+    return isLeftHand ? OLED_ROTATION_180 : OLED_ROTATION_0;
+}
+
+void oled_task_user(void) {
+  if (is_keyboard_master()) {
+    // Host Keyboard Layer Status
+    oled_write_P(PSTR("Layer: "), false);
+    switch (get_highest_layer(layer_state)) {
+    case _QWERTY:
+      oled_write_P(PSTR("Default\n"), false);
+      break;
+    case _FN:
+      oled_write_P(PSTR("Function\n"), false);
+      break;
+    default:
+      // Or use the write_ln shortcut over adding '\n' to the end of your string
+      oled_write_ln_P(PSTR("Undefined"), false);
+    }
+
+    // Host Keyboard LED Status
+    led_t led_usb_state = host_keyboard_led_state();
+    oled_write_P(led_usb_state.num_lock ? PSTR("NUMLCK ") : PSTR("       "), false);
+    oled_write_P(led_usb_state.caps_lock ? PSTR("CAPLCK ") : PSTR("       "), false);
+    oled_write_P(led_usb_state.scroll_lock ? PSTR("SCRLCK ") : PSTR("       "), false);
+  } else {
+    render_qmk_logo();
+  }
+}
+#endif
--- a/keyboards/basekeys/slice/rev1_rgb/keymaps/via/rules.mk
+++ b/keyboards/basekeys/slice/rev1_rgb/keymaps/via/rules.mk
--- a/keyboards/basekeys/slice/rev1_rgb/rev1_rgb.h
+++ b/keyboards/basekeys/slice/rev1_rgb/rev1_rgb.h
@@ -76,5 +76,23 @@
    { R40,   R41,   R42,   R43,   R44, KC_NO, KC_NO,   KC_NO,   KC_NO } \
  }

-
+#define LAYOUT_all( \
+    L00, L01, L02, L03, L04, L05, L06, L07,      R00, R01, R02, R03, R04, R05, R06, \
+    L10, L11, L12, L13, L14, L15, L16,           R10, R11, R12, R13, R14, R15, R16, R17, \
+    L20, L21, L22, L23, L24, L25, L26,           R20, R21, R22, R23, R24, R25, R26, \
+    L30, L31, L32, L33, L34, L35, L36,           R30, R31, R32, R33, R34, R35, R36, R37,\
+    L40, L41, L42, L43, L44, L45, L46,           R40, R41, R42, R43, R44 \
+  ) \
+  { \
+    { L00,   L01,   L02,   L03,   L04,   L05,   L06,   L07,     KC_NO }, \
+    { L10,   L11,   L12,   L13,   L14,   L15,   L16,   KC_NO,   KC_NO }, \
+    { L20,   L21,   L22,   L23,   L24,   L25,   L26,   KC_NO,   KC_NO }, \
+    { L30,   L31,   L32,   L33,   L34,   L35,   L36,   KC_NO,   KC_NO }, \
+    { L40,   L41,   L42,   L43,   L44,   L45,   L46,   KC_NO,   KC_NO },  \
+    { R00,   R01,   R02,   R03,   R04,   R05,   R06,   KC_NO,   KC_NO },  \
+    { R10,   R11,   R12,   R13,   R14,   R15,   R16,     R17,   KC_NO }, \
+    { R20,   R21,   R22,   R23,   R24,   R25,   R26,   KC_NO,   KC_NO }, \
+    { R30,   R31,   R32,   R33,   R34,   R35,   R36,     R37,   KC_NO }, \
+    { R40,   R41,   R42,   R43,   R44, KC_NO, KC_NO,   KC_NO,   KC_NO } \
+  }

--- a/keyboards/basekeys/trifecta/keymaps/via/keymap.c
+++ b/keyboards/basekeys/trifecta/keymaps/via/keymap.c
@@ -24,7 +24,7 @@ enum layer_names {

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  [_BASE] = LAYOUT(
-    KC_ESC,  RGB_TOG,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,  KC_DEL,   KC_DEL,
+    KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,  KC_DEL,   KC_DEL,
    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,             KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,     KC_END,
    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,             KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                 KC_HOME,
    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,        MO(_MEDIA),   KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,        KC_UP,
--- a/keyboards/bm60poker/bm60poker.c
+++ b/keyboards/bm60poker/bm60poker.c
@@ -0,0 +1,52 @@
+/* Copyright 2020 ipetepete
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "bm60poker.h"
+
+#ifdef RGB_MATRIX_ENABLE
+led_config_t g_led_config = { {
+  { 0,      1,      2,      3,      4,      5,      6,      7,      8,      9,      10,     11,     12,     13 },
+  { 14,     15,     16,     17,     18,     19,     20,     21,     22,     23,     24,     25,     26,     27 },
+  { 28,     NO_LED, 29,     30,     31,     32,     33,     34,     35,     36,     37,     38,     39,     40 },
+  { NO_LED, 41,     42,     43,     44,     45,     46,     47,     48,     49,     50,     51, NO_LED,     52 },
+  { 53,     54,     55,     NO_LED, NO_LED, NO_LED, 56,     NO_LED, NO_LED, 57,     58, NO_LED,     59,     60 }
+}, {
+    // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace
+    {   0,   0 }, {  15,   0 }, {  30,   0 }, {  45,   0 }, {  60,   0 }, {  75,   0 }, {  90,   0 }, { 105,   0 }, { 120,   0 }, { 135,   0 }, { 150,   0 }, { 165,   0 }, { 180,   0 }, { 202,   0 },
+    // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ],  ,
+    {   7,  16 }, {  22,  16 }, {  37,  16 }, {  52,  16 }, {  67,  16 }, {  82,  16 }, {  97,  16 }, { 112,  16 }, { 127,  16 }, { 142,  16 }, { 157,  16 }, { 172,  16 }, { 187,  16 }, { 206,  16 },
+    // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter
+    {  11,  32 }, {  26,  32 }, {  41,  32 }, {  56,  32 }, {  71,  32 }, {  86,  32 }, { 101,  32 }, { 116,  32 }, { 131,  32 }, { 146,  32 }, { 161,  32 }, { 176,  32 }, { 198,  32 },
+    // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up,
+    {  18,  48 }, {  30,  48 }, {  45,  48 }, {  60,  48 }, {  75,  48 }, {  90,  48 }, { 105,  48 }, { 120,  48 }, { 135,  48 }, { 150,  48 }, { 165,  48 }, { 191,  48 },
+    // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right
+    {   3,  64 }, {  22,  64 }, {  33,  64 }, { 101,  64 }, { 135,  64 }, { 153,  64 }, { 210,  64 }, { 225,  64 },
+    // UNDERGLOW
+    {   216, 32 }, {  180,  32 }, {  144, 32 }, { 108,  32 }, { 72,  32 }, { 36,  32 }
+}, {
+    // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace
+    4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ],  ,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up,
+    1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
+    // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right
+    1, 1, 1, 4, 1, 1, 1, 1,
+    // UNDERGLOW
+    2, 2, 2, 2, 2, 2
+} };
+#endif
--- a/keyboards/bm60poker/bm60poker.h
+++ b/keyboards/bm60poker/bm60poker.h
@@ -0,0 +1,32 @@
+/* Copyright 2020 ipetepete
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_60_ansi( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,        \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,      \
+    K20,    K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,          \
+    K31,       K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D,            \
+    K40,  K41,  K42,              K46,                K49,  K4A,  K4C,  K4D      \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   K0D   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   K1D   }, \
+    { K20,   KC_NO, K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D   }, \
+    { KC_NO, K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   KC_NO, K3D   }, \
+    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, K49,   K4A,   KC_NO, K4C,   K4D   }, \
+}
--- a/keyboards/bm60poker/config.h
+++ b/keyboards/bm60poker/config.h
@@ -0,0 +1,70 @@
+/*
+Copyright 2020 ipetepete
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x4B50 // "KP"
+#define PRODUCT_ID      0xEF8E
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    KP Republic
+#define PRODUCT         BM60POKER
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 14
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, E6 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7 }
+
+#define DIODE_DIRECTION COL2ROW
+
+#define RGB_DI_PIN E2
+#define DRIVER_LED_TOTAL 67
+#ifdef RGB_DI_PIN
+    #define RGBLED_NUM 67
+    #define RGB_MATRIX_KEYPRESSES
+    #define RGBLIGHT_HUE_STEP 8
+    #define RGBLIGHT_SAT_STEP 8
+    #define RGBLIGHT_VAL_STEP 8
+    #define RGBLIGHT_LIMIT_VAL 5 /* The maximum brightness level */
+    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+    #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//     #define RGBLIGHT_EFFECT_BREATHING
+//     #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//     #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//     #define RGBLIGHT_EFFECT_SNAKE
+//     #define RGBLIGHT_EFFECT_KNIGHT
+//     #define RGBLIGHT_EFFECT_CHRISTMAS
+//     #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//     #define RGBLIGHT_EFFECT_RGB_TEST
+//     #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
--- a/keyboards/bm60poker/info.json
+++ b/keyboards/bm60poker/info.json
@@ -0,0 +1,74 @@
+{
+    "keyboard_name": "BM60POKER",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 15,
+    "height": 5,
+    "layouts": {
+        "LAYOUT_60_ansi": {
+            "layout": [
+                {"label":"K00 (B0,D0)", "x":0, "y":0},
+                {"label":"K01 (B0,D1)", "x":1, "y":0},
+                {"label":"K02 (B0,D2)", "x":2, "y":0},
+                {"label":"K03 (B0,D3)", "x":3, "y":0},
+                {"label":"K04 (B0,D5)", "x":4, "y":0},
+                {"label":"K05 (B0,D4)", "x":5, "y":0},
+                {"label":"K06 (B0,D6)", "x":6, "y":0},
+                {"label":"K07 (B0,D7)", "x":7, "y":0},
+                {"label":"K08 (B0,B4)", "x":8, "y":0},
+                {"label":"K09 (B0,B5)", "x":9, "y":0},
+                {"label":"K0A (B0,B6)", "x":10, "y":0},
+                {"label":"K0B (B0,C6)", "x":11, "y":0},
+                {"label":"K0C (B0,C7)", "x":12, "y":0},
+                {"label":"K0D (B0,F7)", "x":13, "y":0, "w":2},
+                {"label":"K10 (B1,D0)", "x":0, "y":1, "w":1.5},
+                {"label":"K11 (B1,D1)", "x":1.5, "y":1},
+                {"label":"K12 (B1,D2)", "x":2.5, "y":1},
+                {"label":"K13 (B1,D3)", "x":3.5, "y":1},
+                {"label":"K14 (B1,D5)", "x":4.5, "y":1},
+                {"label":"K15 (B1,D4)", "x":5.5, "y":1},
+                {"label":"K16 (B1,D6)", "x":6.5, "y":1},
+                {"label":"K17 (B1,D7)", "x":7.5, "y":1},
+                {"label":"K18 (B1,B4)", "x":8.5, "y":1},
+                {"label":"K19 (B1,B5)", "x":9.5, "y":1},
+                {"label":"K1A (B1,B6)", "x":10.5, "y":1},
+                {"label":"K1B (B1,C6)", "x":11.5, "y":1},
+                {"label":"K1C (B1,C7)", "x":12.5, "y":1},
+                {"label":"K1D (B1,F7)", "x":13.5, "y":1, "w":1.5},
+                {"label":"K20 (B2,D0)", "x":0, "y":2, "w":1.75},
+                {"label":"K22 (B2,D2)", "x":1.75, "y":2},
+                {"label":"K23 (B2,D3)", "x":2.75, "y":2},
+                {"label":"K24 (B2,D5)", "x":3.75, "y":2},
+                {"label":"K25 (B2,D4)", "x":4.75, "y":2},
+                {"label":"K26 (B2,D6)", "x":5.75, "y":2},
+                {"label":"K27 (B2,D7)", "x":6.75, "y":2},
+                {"label":"K28 (B2,B4)", "x":7.75, "y":2},
+                {"label":"K29 (B2,B5)", "x":8.75, "y":2},
+                {"label":"K2A (B2,B6)", "x":9.75, "y":2},
+                {"label":"K2B (B2,C6)", "x":10.75, "y":2},
+                {"label":"K2C (B2,C7)", "x":11.75, "y":2},
+                {"label":"K2D (B2,F7)", "x":12.75, "y":2, "w":2.25},
+                {"label":"K31 (B3,D1)", "x":0, "y":3, "w":2.25},
+                {"label":"K32 (B3,D2)", "x":2.25, "y":3},
+                {"label":"K33 (B3,D3)", "x":3.25, "y":3},
+                {"label":"K34 (B3,D5)", "x":4.25, "y":3},
+                {"label":"K35 (B3,D4)", "x":5.25, "y":3},
+                {"label":"K36 (B3,D6)", "x":6.25, "y":3},
+                {"label":"K37 (B3,D7)", "x":7.25, "y":3},
+                {"label":"K38 (B3,B4)", "x":8.25, "y":3},
+                {"label":"K39 (B3,B5)", "x":9.25, "y":3},
+                {"label":"K3A (B3,B6)", "x":10.25, "y":3},
+                {"label":"K3B (B3,C6)", "x":11.25, "y":3},
+                {"label":"K3D (B3,F7)", "x":12.25, "y":3, "w":2.75},
+                {"label":"K40 (E6,D0)", "x":0, "y":4, "w":1.25},
+                {"label":"K41 (E6,D1)", "x":1.25, "y":4, "w":1.25},
+                {"label":"K42 (E6,D2)", "x":2.5, "y":4, "w":1.25},
+                {"label":"K46 (E6,D6)", "x":3.75, "y":4, "w":6.25},
+                {"label":"K49 (E6,B5)", "x":10, "y":4, "w":1.25},
+                {"label":"K4A (E6,B6)", "x":11.25, "y":4, "w":1.25},
+                {"label":"K4C (E6,C7)", "x":12.5, "y":4, "w":1.25},
+                {"label":"K4D (E6,F7)", "x":13.75, "y":4, "w":1.25}
+            ]
+        }
+    }
+}
--- a/keyboards/bm60poker/keymaps/default/keymap.c
+++ b/keyboards/bm60poker/keymaps/default/keymap.c
@@ -0,0 +1,34 @@
+/* Copyright 2020 ipetepete
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_60_ansi(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,
+        KC_LSFT,            KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+        KC_LCTL,   KC_LGUI,   KC_LALT,                       KC_SPC,                              KC_RALT,   KC_RGUI,   MO(1),     KC_RCTL
+    ),
+    [1] = LAYOUT_60_ansi(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______,     RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
+        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______,   _______,   _______,                      _______,                              _______,   _______,   _______,   _______
+    ),
+
+};
--- a/keyboards/bm60poker/keymaps/ipetepete/keymap.c
+++ b/keyboards/bm60poker/keymaps/ipetepete/keymap.c
@@ -0,0 +1,144 @@
+/* Copyright 2020 ipetepete
+  * 
+  * This program is free software: you can redistribute it and/or modify 
+  * it under the terms of the GNU General Public License as published by 
+  * the Free Software Foundation, either version 2 of the License, or 
+  * (at your option) any later version. 
+  * 
+  * This program is distributed in the hope that it will be useful, 
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+  * GNU General Public License for more details. 
+  * 
+  * You should have received a copy of the GNU General Public License 
+  * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+  */ 
+#include QMK_KEYBOARD_H
+
+enum layers {
+_qwerty,
+_gamer,
+_colemak,
+_fn,
+_rgb,
+_spcfn
+};
+
+
+enum keycodes {
+gamer = SAFE_RANGE,
+qwerty,
+colemak
+};
+
+#define KC_SPFN LT(_spcfn, KC_SPC) // press for space, hold for function layer (aka spacefn)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_qwerty] = LAYOUT_60_ansi(
+        KC_GRV,        KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+        KC_TAB,         KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        CTL_T(KC_ESC), KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,
+        KC_LSFT,                 KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,          KC_RSFT,
+        KC_LCTL,        KC_LGUI, KC_LALT,                            KC_SPFN,                             KC_RALT, KC_RCTL, MO(_fn),   MO(_rgb)
+    ),
+    // Gamer standard qwerty layout but with normal space for jumping etc
+    [_gamer] = LAYOUT_60_ansi(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______,                            KC_SPACE,                            _______, _______, _______, _______
+    ),
+    [_colemak] = LAYOUT_60_ansi(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______, _______,
+        _______, KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN,  _______, _______, _______,
+        _______, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,     KC_QUOT,          _______,
+        _______,          KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    _______, _______, _______,           _______,
+        _______, _______, _______,                            KC_SPFN,                            _______, _______, _______,  _______
+    ),
+    [_fn] = LAYOUT_60_ansi(
+        KC_GESC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, _______, KC_UP,   _______, _______, _______, KC_CALC, _______, KC_INS,  _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP,          _______,
+        KC_MPLY,          KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, NK_TOGG, _______, _______, KC_END,  KC_PGDN,          KC_MNXT,
+        qwerty, colemak, gamer,                            _______,                            _______, _______, _______, _______
+    ),
+    [_rgb] = LAYOUT_60_ansi(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, RGB_TOG, _______, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, _______, _______, _______, RESET,
+        _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPI, RGB_SPD, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______
+    ),
+    [_spcfn] = LAYOUT_60_ansi(
+        _______, SGUI(1), SGUI(2), SGUI(3), SGUI(4), SGUI(5), SGUI(6), SGUI(7),  SGUI(8), SGUI(9), SGUI(0), _______,  _______, KC_DEL,
+        _______, _______, _______, KC_PGUP, _______, KC_LBRC, KC_RBRC,  _______, KC_UP,   _______, _______, _______,  _______, _______,
+        KC_CAPS, _______, _______, KC_PGDN, _______, KC_LCBR, KC_RCBR,  KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______,          _______,
+        _______,          _______, _______, _______, _______, KC_LPRN, KC_RPRN,  _______, _______, _______, _______,           _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______
+    )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+      case qwerty:
+        if (record->event.pressed) {
+            layer_clear();
+            layer_on(_qwerty);
+            set_single_persistent_default_layer(_qwerty);
+        }
+        return false;
+        break;
+      case colemak:
+        if (record->event.pressed) {
+            layer_clear();
+            layer_on(_colemak);
+        }
+        return false;
+        break;
+      case gamer:
+        if (record->event.pressed) {
+            layer_clear();
+            layer_on(_gamer);
+        }
+        return false;
+        break;
+
+  }
+  return true;
+}
+
+void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue) {
+  for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
+    if (HAS_FLAGS(g_led_config.flags[i], LED_FLAG_MODIFIER)) {
+        rgb_matrix_set_color( i, red, green, blue );
+    }
+  }
+}
+
+
+void rgb_matrix_indicators_kb(void)
+{
+	if (!g_suspend_state && rgb_matrix_config.enable) {
+        switch (get_highest_layer(layer_state)) {
+            //case _qwerty:
+            //    rgb_matrix_set_color(26, 0xFF, 0x00, 0x00);
+            //    break;
+            case _colemak:
+                rgb_matrix_set_color(55, 0xFF, 0xFF, 0xFF);
+                break;
+            case _spcfn:
+                rgb_matrix_set_color(22, 0xFF, 0x00, 0x00);
+                rgb_matrix_set_color(35, 0xFF, 0x00, 0x00);
+                rgb_matrix_set_color(36, 0xFF, 0x00, 0x00);
+                rgb_matrix_set_color(37, 0xFF, 0x00, 0x00);
+                break;
+            case _gamer:
+                rgb_matrix_set_color(16, 0xFF, 0x00, 0xFF);
+                rgb_matrix_set_color(29, 0xFF, 0x00, 0xFF);
+                rgb_matrix_set_color(30, 0xFF, 0x00, 0xFF);
+                rgb_matrix_set_color(31, 0xFF, 0x00, 0xFF);
+                break;
+        }
+    }
+}
--- a/keyboards/bm60poker/keymaps/ipetepete/readme.md
+++ b/keyboards/bm60poker/keymaps/ipetepete/readme.md
@@ -0,0 +1 @@
+# Simple 60% for coding
--- a/keyboards/bm60poker/keymaps/ipetepete/rules.mk
+++ b/keyboards/bm60poker/keymaps/ipetepete/rules.mk
@@ -0,0 +1 @@
+NKRO_ENABLE = yes # USB Nkey Rollover
--- a/keyboards/bm60poker/readme.md
+++ b/keyboards/bm60poker/readme.md
@@ -0,0 +1,15 @@
+# BM60 Poker 60% Mechanical Keyboard RGB PCB
+
+A 60% hotswap inswitch RGB (north facing) keyboard from KP Republic. 
+
+* Keyboard Maintainer: [ipetepete](https://github.com/ipetepete)
+* Hardware Supported: BM60 POKER RGB
+* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60-rgb-poker-60-gh60-hot-swap-custom-mechanical-keyboard-pcb-program-qmk-underglow-type-c)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bm60poker:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+Video tutorials for customizing the layout: [QMK Tutorials](https://www.youtube.com/playlist?list=PLZlceRZZjRugJFL-vnenYnDrbMc6wu_e_) - By MechMerlin
--- a/keyboards/bm60poker/rules.mk
+++ b/keyboards/bm60poker/rules.mk
@@ -0,0 +1,24 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+RGB_MATRIX_ENABLE = WS2812
+LAYOUTS = 60_ansi
--- a/keyboards/bm60rgb_iso/bm60rgb_iso.h
+++ b/keyboards/bm60rgb_iso/bm60rgb_iso.h
@@ -17,7 +17,7 @@

 #include "quantum.h"

-#define LAYOUT( \
+#define LAYOUT_60_iso_arrow( \
    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,        \
    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,           \
    K20,    K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,   K1D,   \
@@ -30,3 +30,5 @@
    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   K3C,   K3D   }, \
    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, K46,   KC_NO, KC_NO, K49,   K4A,   K4B,   K4C,   K4D   }, \
 }
+
+#define LAYOUT LAYOUT_60_iso_arrow
--- a/keyboards/bm60rgb_iso/keymaps/default/keymap.c
+++ b/keyboards/bm60rgb_iso/keymaps/default/keymap.c
@@ -16,19 +16,18 @@
 #include QMK_KEYBOARD_H

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT(
-        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
-        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
-        KC_CAPS,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_BSLS,    KC_ENT,
-        KC_LSFT,   KC_BSLS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_RSFT,        KC_UP,   KC_SLSH,
-        KC_LCTL,   KC_LGUI,   KC_LALT,                       KC_SPC,                              KC_RALT, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
+    [0] = LAYOUT_60_iso_arrow(
+        KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,
+        KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_RSFT, KC_UP,   KC_SLSH,
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    KC_RALT, MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
    ),
-    [1] = LAYOUT(
-        RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-        _______,     RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______,
-        _______,       _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,    _______,
-        _______,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______,
-        _______,   _______,   _______,                      _______,                              _______, _______, _______, _______, _______
+    [1] = LAYOUT_60_iso_arrow(
+        RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______,
+        _______, _______, _______,                            _______,                   _______, _______, KC_HOME, KC_PGDN, KC_END
    ),
-
 };
--- a/keyboards/boardsource/5x12/keymaps/via/keymap.c
+++ b/keyboards/boardsource/5x12/keymaps/via/keymap.c
@@ -35,12 +35,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
  RESET,   _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
  ),
+
  [3] = LAYOUT_ortho_5x12(
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
-  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
  )

 };
--- a/keyboards/boardwalk/keymaps/default_2x2u/keymap.c
+++ b/keyboards/boardwalk/keymaps/default_2x2u/keymap.c
@@ -0,0 +1,90 @@
+/*
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+// Layer shorthand
+enum layer_names {
+    _BASE,
+    _FN,
+    _RAISE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Base Layer
+     * .-----------------------------------------------------------------------------------------------------------------------------.
+     * | ESC    | 1      | 2      | 3      | 4      | 5      | -      | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+     * | TAB    | Q      | W      | E      | R      | T      | [      | ]      | Y      | U      | I      | O      | P      | '      |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+     * | CAP LK | A      | S      | D      | F      | G      | HOME   | PG UP  | H      | J      | K      | L      | ;      | ENTER  |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+     * | LSHIFT | Z      | X      | C      | V      | B      | END    | PG DN  | N      | M      | ,      | .      | /      | RSHIFT |
+     * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+     * | LCTRL  | LGUI   | FN     | LALT   | RAISE  |      SPACE      |      SPACE      | LEFT   | DOWN   | UP     | RIGHT  | RCTRL  |
+     * '-----------------------------------------------------------------------------------------------------------------------------'
+     */
+    [_BASE] = LAYOUT_ortho_2x2u(
+        KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_MINS, KC_EQL,  KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_LBRC, KC_RBRC, KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_QUOT,
+        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_HOME, KC_PGUP, KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_ENT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_END,  KC_PGDN, KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+        KC_LCTL, KC_LGUI, MO(_FN), KC_LALT, MO(_RAISE),  KC_SPC,             KC_SPC,     KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, KC_RCTL
+    ),
+
+    /* Function Layer
+     * .-----------------------------------------------------------------------------------------------------------------------------.
+     * | `      | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | F11    | F12    | DEL    |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+     * |        |        | MENU   |        |        |        |        |        |        |        |        |        | PRT SC |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+     * |        |        |        |        |        |        |        |        |        |        |        |        |        | RESET  |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+     * |        |        |        |        |        |        |        |        |        | MUTE   | VOL DN | VOL UP | \      |        |
+     * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+     * |        |        |        |        |        |                 |                 |        |        |        |        |        |
+     * '-----------------------------------------------------------------------------------------------------------------------------'
+     */
+    [_FN] = LAYOUT_ortho_2x2u(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, _______, KC_APP,  _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_BSLS, _______,
+        _______, _______, _______, _______, _______,     _______,          _______,      _______, _______, _______, _______, _______
+    ),
+
+    /* Raise Layer
+     * .-----------------------------------------------------------------------------------------------------------------------------.
+     * | `      | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | F11    | F12    | DEL    |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+     * |        |        | MENU   |        |        |        |        |        |        |        |        |        | PRT SC |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+     * |        |        |        |        |        |        |        |        |        |        |        |        |        | RESET  |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+     * |        |        |        |        |        |        |        |        |        | MUTE   | VOL DN | VOL UP | \      |        |
+     * |--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------|
+     * |        |        |        |        |        |                 |                 |        |        |        |        |        |
+     * '-----------------------------------------------------------------------------------------------------------------------------'
+     */
+    [_RAISE] = LAYOUT_ortho_2x2u(
+        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,
+        _______, _______, KC_APP,  _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_BSLS, _______,
+        _______, _______, _______, _______, _______,     _______,          _______,      _______, _______, _______, _______, _______
+    )
+
+};
--- a/keyboards/boardwalk/keymaps/default_2x2u/readme.md
+++ b/keyboards/boardwalk/keymaps/default_2x2u/readme.md
@@ -0,0 +1 @@
+# The default_2x2u keymap for Boardwalk
--- a/keyboards/boardwalk/keymaps/niclake/config.h
+++ b/keyboards/boardwalk/keymaps/niclake/config.h
@@ -0,0 +1,18 @@
+/*
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define TAPPING_TOGGLE 2
--- a/keyboards/boardwalk/keymaps/niclake/keymap.c
+++ b/keyboards/boardwalk/keymaps/niclake/keymap.c
@@ -0,0 +1,150 @@
+/*
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+enum layer_names {
+    _BASE,
+    _QWERTY,
+    _FN,
+    _NUM,
+    _ADJ,
+};
+
+enum custom_keycodes {
+    QWERTY = SAFE_RANGE,
+    COLEMAK,
+    FN,
+    NUM,
+    ADJ,
+    MACWIN
+};
+
+#define QWERTY DF(_QWERTY)
+#define COLEMAK DF(_BASE)
+#define FN MO(_FN)
+#define NUM TT(_NUM)
+#define ADJ MO(_ADJ)
+#define MACWIN AG_TOGG
+#define RGB_ON RGB_MODE_PLAIN
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    /* Base Layer (Colemak)
+     * .-----------------------------------------------------------------------------------------------------------------------------.
+     * | `      | 1      | 2      | 3      | 4      | 5      | -      | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+     * | TAB    | Q      | W      | F      | P      | G      | [      | ]      | J      | L      | U      | Y      | ;      | \      |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+     * | _FN    | A      | R      | S      | T      | D      | HOME   | PG UP  | H      | N      | E      | I      | O      | '      |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+     * | LSHIFT | Z      | X      | C      | V      | B      | END    | PG DN  | K      | M      | ,      | .      | /      | RSHIFT |
+     * '--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------'
+     *          | LCTRL  | LALT   | LGUI   | TG_NUM |      ENTER      |      SPACE      | LEFT   | DOWN   | UP     | RIGHT  |
+     *          '-----------------------------------------------------------------------------------------------------------'
+     */
+    [_BASE] = LAYOUT_ortho_hhkb(
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5, KC_MINS, KC_EQL,  KC_6, KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G, KC_LBRC, KC_RBRC, KC_J, KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSLS,
+        FN,      KC_A,    KC_R,    KC_S,    KC_T,    KC_D, KC_HOME, KC_PGUP, KC_H, KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT,
+        KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B, KC_END,  KC_PGDN, KC_K, KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC,
+                 KC_LCTL, KC_LALT, KC_LGUI, NUM,           KC_ENT,  KC_SPC,        KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+    ),
+
+    /* QWERTY
+     * .-----------------------------------------------------------------------------------------------------------------------------.
+     * | `      | 1      | 2      | 3      | 4      | 5      | -      | =      | 6      | 7      | 8      | 9      | 0      | BACKSP |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+     * | TAB    | Q      | W      | E      | R      | T      | [      | ]      | Y      | U      | I      | O      | P      | \      |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+     * | _FN    | A      | S      | D      | F      | G      | HOME   | PG UP  | H      | J      | K      | L      | ;      | '      |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+     * | LSHIFT | Z      | X      | C      | V      | B      | END    | PG DN  | N      | M      | ,      | .      | /      | RSHIFT |
+     * '--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------'
+     *          | LCTRL  | LALT   | LGUI   | TG_NUM |      ENTER      |      SPACE      | LEFT   | DOWN   | UP     | RIGHT  |
+     *          '-----------------------------------------------------------------------------------------------------------'
+     */
+    [_QWERTY] = LAYOUT_ortho_hhkb(
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5, KC_MINS, KC_EQL,  KC_6, KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS,
+        FN,      KC_A,    KC_S,    KC_D,    KC_F,    KC_G, KC_HOME, KC_PGUP, KC_H, KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+        KC_LSPO, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B, KC_END,  KC_PGDN, KC_N, KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSPC,
+                 KC_LCTL, KC_LALT, KC_LGUI, NUM,           KC_ENT,  KC_SPC,        KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT
+    ),
+
+    /* FN
+     * .-----------------------------------------------------------------------------------------------------------------------------.
+     * | ESC    | F1     | F2     | F3     | F4     | F5     | F11    | F12    | F6     | F7     | F8     | F9     | F10    | DEL    |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+     * |        | Prev   | Play   | Next   |        |        |        |        |        | Pg Up  | Up     | Pg Dn  | PRT SC |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+     * | XXXXXX |        | Mute   | Vol Dn | Vol Up |        |        |        |        | Left   | Down   | Right  |        |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+     * |        |        |        |        |        |        |        |        |        | Home   |        | End    |        | CapsLk |
+     * '--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------'
+     *          |        |        |        | _ADJ   |                 |                 |        |        |        |        |
+     *          '-----------------------------------------------------------------------------------------------------------'
+     */
+    [_FN] = LAYOUT_ortho_hhkb(
+        KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,    KC_F5,   KC_F11,  KC_F12,  KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_DEL,
+        _______, KC_MPRV, KC_MPLY, KC_MNXT, _______,  _______, _______, _______, _______, KC_PGUP, KC_UP,   KC_PGDN, KC_PSCR, _______,
+        _______, _______, KC_MUTE, KC_VOLD, KC_VOLU,  _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
+        _______, _______, _______, _______, _______,  _______, _______, _______, _______, KC_HOME, _______, KC_END,  _______, KC_CAPS,
+                 _______, _______, _______, ADJ,               _______, _______,          _______, _______, _______, _______
+    ),
+
+    /* Num Pad (NUM)
+     * .-----------------------------------------------------------------------------------------------------------------------------.
+     * |        |        |        |        |        |        |        |        | Num Lk | KP /   | KP *   | KP -   | Scr Lk | Pause  |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+     * |        |        |        |        |        |        |        |        | KP 7   | KP 8   | KP 9   | KP +   |        |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+     * | _ADJ   |        |        |        |        |        |        |        | KP 4   | KP 5   | KP 6   | KP +   |        |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+     * |        |        |        |        |        |        |        |        | KP 1   | KP 2   | KP 3   | KP Ent |        |        |
+     * '--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------'
+     *          |        |        |        | XXXXXX |                 |      KP 0       | KP 0   | KP .   | KP Ent |        |
+     *          '-----------------------------------------------------------------------------------------------------------'
+     */
+    [_NUM] = LAYOUT_ortho_hhkb(
+        _______, _______, _______, _______, _______, _______, _______, _______, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_SLCK, KC_PAUS,
+        _______, _______, _______, _______, _______, _______, _______, _______, KC_KP_7, KC_KP_8, KC_KP_9, KC_PPLS, _______, _______,
+        ADJ,     _______, _______, _______, _______, _______, _______, _______, KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT, _______, _______,
+                 _______, _______, _______, _______,          _______, KC_KP_0,          KC_KP_0, KC_PDOT, KC_PENT, _______
+    ),
+
+    /* ADJUST + RGB Control
+     * .-----------------------------------------------------------------------------------------------------------------------------.
+     * |        | Static | Breath | Rainbw | Swirl  | Gradnt | Test   |        |        |        |        |        |        |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+     * |        | On/Off | ModeUp | Hue Up | Sat Up | Val Up |        |        |        |        |        |        | RESET  |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------+--------|
+     * | XXXXXX | MACWIN |        | Hue Dn | Sat Dn | Val Dn |        |        |        |        |        |        |        |        |
+     * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------------------------+--------|
+     * |        | Colemak| QWERTY |        |        |        |        |        |        |        |        |        |        |        |
+     * '--------+--------+--------+--------+--------+-----------------+--------+--------+--------+-----------------+--------+--------'
+     *          |        |        |        | XXXXXX |                 |                 |        |        |        |        |
+     *          '-----------------------------------------------------------------------------------------------------------'
+     */
+    [_ADJ] = LAYOUT_ortho_hhkb(
+        _______, RGB_ON,  RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_G, RGB_M_T, _______, _______, _______, _______, _______, _______, _______,
+        _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI,  RGB_VAI, _______, _______, _______, _______, _______, _______, RESET,   _______,
+        _______, MACWIN,  _______, RGB_HUD, RGB_SAD,  RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, COLEMAK, QWERTY,  _______, _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______,
+                 _______, _______, _______, _______,           _______, _______,          _______, _______, _______, _______
+    )
+
+};
--- a/keyboards/boardwalk/keymaps/niclake/readme.md
+++ b/keyboards/boardwalk/keymaps/niclake/readme.md
@@ -0,0 +1,8 @@
+# Nic Lake's Boardwalk Layout
+
+This is Nic's Boardwalk layout, which is based off of the default Pok3r layout.
+
+- Colemak base layer w/ QWERTY support
+- Bottom row set up for Mac usage (use `MACWIN`/`AG_TOGG` to toggle)
+- Latching Numpad layer for data entry
+- Uses [Space Cadet shift keys](https://docs.qmk.fm/#/feature_space_cadet?id=usage)
--- a/keyboards/boardwalk/keymaps/niclake/rules.mk
+++ b/keyboards/boardwalk/keymaps/niclake/rules.mk
@@ -0,0 +1,3 @@
+COMMAND_ENABLE   = no
+RGBLIGHT_ENABLE  = yes
+BOOTMAGIC_ENABLE = full
--- a/keyboards/cannonkeys/an_c/bootloader_defs.h
+++ b/keyboards/cannonkeys/an_c/bootloader_defs.h
@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
--- a/keyboards/cannonkeys/chimera65/bootloader_defs.h
+++ b/keyboards/cannonkeys/chimera65/bootloader_defs.h
@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
--- a/keyboards/cannonkeys/instant60/bootloader_defs.h
+++ b/keyboards/cannonkeys/instant60/bootloader_defs.h
@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
--- a/keyboards/cannonkeys/iron165/bootloader_defs.h
+++ b/keyboards/cannonkeys/iron165/bootloader_defs.h
@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
--- a/keyboards/cannonkeys/ortho48/bootloader_defs.h
+++ b/keyboards/cannonkeys/ortho48/bootloader_defs.h
@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-#define STM32_BOOTLOADER_ADDRESS 0x80000000
--- a/keyboards/cannonkeys/ortho48/rules.mk
+++ b/keyboards/cannonkeys/ortho48/rules.mk
@@ -1,12 +1,8 @@
 # MCU name
 MCU = STM32F103

-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# Bootloader selection
+BOOTLOADER = stm32duino

 # project specific files
 VPATH += keyboards/cannonkeys/bluepill
--- a/keyboards/cannonkeys/ortho60/bootloader_defs.h
+++ b/keyboards/cannonkeys/ortho60/bootloader_defs.h
@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-#define STM32_BOOTLOADER_ADDRESS 0x80000000
--- a/keyboards/cannonkeys/ortho60/rules.mk
+++ b/keyboards/cannonkeys/ortho60/rules.mk
@@ -1,12 +1,8 @@
 # MCU name
 MCU = STM32F103

-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# Bootloader selection
+BOOTLOADER = stm32duino

 # project specific files
 VPATH += keyboards/cannonkeys/bluepill
--- a/keyboards/cannonkeys/ortho75/bootloader_defs.h
+++ b/keyboards/cannonkeys/ortho75/bootloader_defs.h
@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-#define STM32_BOOTLOADER_ADDRESS 0x80000000
--- a/keyboards/cannonkeys/ortho75/rules.mk
+++ b/keyboards/cannonkeys/ortho75/rules.mk
@@ -1,12 +1,8 @@
 # MCU name
 MCU = STM32F103

-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# Bootloader selection
+BOOTLOADER = stm32duino

 # project specific files
 VPATH += keyboards/cannonkeys/bluepill
--- a/keyboards/cannonkeys/practice60/bootloader_defs.h
+++ b/keyboards/cannonkeys/practice60/bootloader_defs.h
@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-#define STM32_BOOTLOADER_ADDRESS 0x80000000
--- a/keyboards/cannonkeys/practice60/rules.mk
+++ b/keyboards/cannonkeys/practice60/rules.mk
@@ -1,12 +1,8 @@
 # MCU name
 MCU = STM32F103

-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# Bootloader selection
+BOOTLOADER = stm32duino

 # project specific files
 VPATH += keyboards/cannonkeys/bluepill
--- a/keyboards/cannonkeys/practice65/bootloader_defs.h
+++ b/keyboards/cannonkeys/practice65/bootloader_defs.h
@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-#define STM32_BOOTLOADER_ADDRESS 0x80000000
--- a/keyboards/cannonkeys/practice65/rules.mk
+++ b/keyboards/cannonkeys/practice65/rules.mk
@@ -1,12 +1,8 @@
 # MCU name
 MCU = STM32F103

-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# Bootloader selection
+BOOTLOADER = stm32duino

 # project specific files
 VPATH += keyboards/cannonkeys/bluepill
--- a/keyboards/cannonkeys/savage65/bootloader_defs.h
+++ b/keyboards/cannonkeys/savage65/bootloader_defs.h
@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
--- a/keyboards/cannonkeys/tmov2/bootloader_defs.h
+++ b/keyboards/cannonkeys/tmov2/bootloader_defs.h
@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
--- a/keyboards/clawsome/fightpad/config.h
+++ b/keyboards/clawsome/fightpad/config.h
@@ -0,0 +1,45 @@
+/*
+Copyright 2020 AAClawson (AlisGraveNil)
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x7767
+#define PRODUCT_ID      0x481C
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    AlisGraveNil
+#define PRODUCT         FightPad
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 7
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B5, B6 }
+#define MATRIX_COL_PINS { D7, E6, B4, B2, B3, B1, F7 }
+
+#define DIODE_DIRECTION COL2ROW
--- a/keyboards/clawsome/fightpad/fightpad.c
+++ b/keyboards/clawsome/fightpad/fightpad.c
@@ -0,0 +1,16 @@
+/* Copyright 2020 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "fightpad.h"
--- a/keyboards/clawsome/fightpad/fightpad.h
+++ b/keyboards/clawsome/fightpad/fightpad.h
@@ -0,0 +1,26 @@
+/* Copyright 2020 AAClawson (AlisGraveNil)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+         K01,           K03, K04, K05, K06,   \
+    K10, K11, K12,      K13, K14, K15, K16    \
+) { \
+    { KC_NO, K01,   KC_NO, K03,   K04,   K05,   K06   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16   }, \
+}
--- a/keyboards/clawsome/fightpad/info.json
+++ b/keyboards/clawsome/fightpad/info.json
@@ -0,0 +1,25 @@
+{
+    "keyboard_name": "FightPad",
+    "url": "www.clawboards.xyz",
+    "maintainer": "AAClawson (AlisGraveNil)",
+    "width": 8,
+    "height": 2,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"K01 (B5,E6)", "x":1, "y":0},
+                {"label":"K03 (B5,B2)", "x":4, "y":0},
+                {"label":"K04 (B5,B3)", "x":5, "y":0},
+                {"label":"K05 (B5,B1)", "x":6, "y":0},
+                {"label":"K06 (B5,F7)", "x":7, "y":0},
+                {"label":"K10 (B6,D7)", "x":0, "y":1},
+                {"label":"K11 (B6,E6)", "x":1, "y":1},
+                {"label":"K12 (B6,B4)", "x":2, "y":1},
+                {"label":"K13 (B6,B2)", "x":4, "y":1},
+                {"label":"K14 (B6,B3)", "x":5, "y":1},
+                {"label":"K15 (B6,B1)", "x":6, "y":1},
+                {"label":"K16 (B6,F7)", "x":7, "y":1}
+            ]
+        }
+    }
+}
--- a/keyboards/clawsome/fightpad/keymaps/default/keymap.c
+++ b/keyboards/clawsome/fightpad/keymaps/default/keymap.c
@@ -1,28 +1,25 @@
-/* Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
- * Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+/* Copyright 2020 REPLACE_WITH_YOUR_NAME
+ *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
- *This program is distributed in the hope that it will be useful,
+ * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
+ */
+#include QMK_KEYBOARD_H

-#include "config_common.h"
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+                 KC_W,                      KC_U,    KC_I,    KC_O,    KC_P,
+        KC_A,    KC_S,    KC_D,             KC_H,    KC_J,    KC_K,    KC_L
+    ),

-#ifndef CONFIG_H
-#define CONFIG_H
+};

-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0xCA40
-#define MANUFACTURER    MECHKEYS
-#define PRODUCT         Mechmini
-#define DESCRIPTION     40% modular keyboard
-
-#endif
--- a/keyboards/clawsome/fightpad/readme.md
+++ b/keyboards/clawsome/fightpad/readme.md
@@ -0,0 +1,13 @@
+# FightPad
+
+This is a 2x7 macropad.
+
+* Keyboard Maintainer: [AAClawson](https://github.com/AlisGraveNil)
+* Hardware Supported: FightPad; Pro Micro or Elite-C
+* Hardware Availability: [Clawsome Boards](https://www.clawboards.xyz/)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make clawsome/fightpad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- a/keyboards/clawsome/fightpad/rules.mk
+++ b/keyboards/clawsome/fightpad/rules.mk
@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
--- a/keyboards/converter/siemens_tastatur/bootloader_defs.h
+++ b/keyboards/converter/siemens_tastatur/bootloader_defs.h
@@ -1,10 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here (page 175):
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-
-// STM32F103* does NOT have an USB bootloader in ROM (only serial),
-//  so setting anything here does not make much sense
-#define STM32_BOOTLOADER_ADDRESS 0x80000000
--- a/keyboards/converter/siemens_tastatur/rules.mk
+++ b/keyboards/converter/siemens_tastatur/rules.mk
@@ -1,12 +1,8 @@
 # MCU name
 MCU = STM32F103

-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = STM32_F103_STM32DUINO
-
-DFU_ARGS = -d 1eaf:0003 -a2 -R
-DFU_SUFFIX_ARGS = -v 1eaf -p 0003
+# Bootloader selection
+BOOTLOADER = stm32duino

 SRC = matrix.c

--- a/keyboards/crkbd/rev1/legacy/matrix.c
+++ b/keyboards/crkbd/rev1/legacy/matrix.c
@@ -155,6 +155,7 @@ void matrix_init(void)

 uint8_t _matrix_scan(void)
 {
+    bool changed = false;
    // Right hand is stored after the left in the matirx so, we need to offset it
    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);

@@ -163,6 +164,7 @@ uint8_t _matrix_scan(void)
        _delay_us(30);  // without this wait read unstable value.
        matrix_row_t cols = read_cols();
        if (matrix_debouncing[i+offset] != cols) {
+            changed = true;
            matrix_debouncing[i+offset] = cols;
            debouncing = DEBOUNCE;
        }
@@ -179,7 +181,7 @@ uint8_t _matrix_scan(void)
        }
    }

-    return 1;
+    return changed;
 }

 #ifdef USE_MATRIX_I2C
@@ -237,16 +239,17 @@ int serial_transaction(int master_changed) {

 uint8_t matrix_scan(void)
 {
+    bool changed = false;
    if (is_master) {
-        matrix_master_scan();
+        changed |= matrix_master_scan();
    }else{
-        matrix_slave_scan();
+        changed |= matrix_slave_scan();
        int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
        memcpy(&matrix[offset],
               (void *)serial_master_buffer, SERIAL_MASTER_BUFFER_LENGTH);
        matrix_scan_quantum();
    }
-    return 1;
+    return (uint8_t) changed;
 }


@@ -297,8 +300,8 @@ uint8_t matrix_master_scan(void) {
    return ret;
 }

-void matrix_slave_scan(void) {
-    _matrix_scan();
+uint8_t matrix_slave_scan(void) {
+    int ret = _matrix_scan();

    int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;

@@ -314,7 +317,7 @@ void matrix_slave_scan(void) {
    for (int i = 0; i < ROWS_PER_HAND; ++i) {
  #ifdef SERIAL_USE_MULTI_TRANSACTION
        if( serial_slave_buffer[i] != matrix[offset+i] )
-	    change = 1;
+        change = 1;
  #endif
        serial_slave_buffer[i] = matrix[offset+i];
    }
@@ -322,6 +325,7 @@ void matrix_slave_scan(void) {
    slave_buffer_change_count += change;
  #endif
 #endif
+    return ret;
 }

 bool matrix_is_modified(void)
--- a/keyboards/crkbd/rev1/legacy/split_util.h
+++ b/keyboards/crkbd/rev1/legacy/split_util.h
@@ -27,7 +27,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 extern volatile bool isLeftHand;

 // slave version of matix scan, defined in matrix.c
-void matrix_slave_scan(void);
+uint8_t matrix_slave_scan(void);

 void split_keyboard_setup(void);
 bool has_usb(void);
--- a/keyboards/dz60/keymaps/mrsendyyk/keymap.c
+++ b/keyboards/dz60/keymaps/mrsendyyk/keymap.c
@@ -1,98 +0,0 @@
-/* Copyright (C) 2020 Sendy YK (https://mr.sendyyk.com).
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- */
- 
-#include QMK_KEYBOARD_H
-
-enum layer_names {
-    _BASE, // Default Layer
-    _FN, // Fn Layer 1
-    _SETTINGS // Fn Layer 2
-};
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {  
-    // Default Layer
-    [_BASE] = LAYOUT_60_ansi_arrow(
-        KC_GESC, KC_1,    KC_2, KC_3,    KC_4, KC_5, KC_6,   KC_7, KC_8, KC_9,    KC_0,           KC_MINS,        KC_EQL,           KC_BSPC,
-        KC_TAB,           KC_Q, KC_W,    KC_E, KC_R, KC_T,   KC_Y, KC_U, KC_I,    KC_O,           KC_P,           KC_LBRC, KC_RBRC, KC_BSLS,
-        KC_CAPS,          KC_A, KC_S,    KC_D, KC_F, KC_G,   KC_H, KC_J, KC_K,    KC_L,           KC_SCLN,        KC_QUOT, KC_ENT,
-        KC_LSFT,          KC_Z, KC_X,    KC_C, KC_V, KC_B,   KC_N, KC_M, KC_COMM, KC_DOT,                         KC_RSFT, KC_UP,   KC_SLSH,
-        KC_LCTL, KC_LGUI,       KC_LALT,             KC_SPC,                      LT(2, KC_RALT), LT(1, KC_RCTL), KC_LEFT, KC_DOWN, KC_RGHT
-    ),
-    // Fn Layer 1
-    [_FN] = LAYOUT_60_ansi_arrow(
-        KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,           KC_DEL,
-        KC_BRIU,          KC_TRNS, KC_TRNS, KC_END,  RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_INS,  KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_EJCT,
-        KC_BRID,          KC_TRNS, KC_SLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE,
-        KC_VOLU,          KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_TRNS, KC_NLCK, KC_MAIL, KC_TRNS, KC_TRNS,          KC_PAUS, KC_PGUP, KC_TRNS,
-        KC_VOLD, KC_MRWD,          KC_MFFD,                   KC_MPLY,                            KC_MSTP, KC_TRNS, KC_MPRV, KC_PGDN, KC_MNXT
-    ),
-    // Fn Layer 2
-    [_SETTINGS] = LAYOUT_60_ansi_arrow(
-        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,
-        KC_TRNS,          RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC,  BL_TOGG, BL_INC,  BL_STEP, KC_TRNS, KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS,
-        KC_TRNS, KC_TRNS,          KC_TRNS,                   KC_TRNS,                            KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
-    )
-};
-
-void keyboard_post_init_user(void) {
-    rgblight_enable_noeeprom();
-    rgblight_sethsv_noeeprom(0, 0, 0);
-}
-
-// RGB Lighting/LED/Underglow as Caps Lock, Num Lock, Scroll Lock, and Layer Indicator
-void update_led(void) {
-    // Num Lock Indicator
-    if (host_keyboard_led_state().num_lock) {
-        rgblight_setrgb(225, 8, 0);
-    }
-    // Scroll Lock Indicator
-    if (host_keyboard_led_state().scroll_lock) {
-        rgblight_setrgb(255, 110, 0);
-    }
-}
-
-void led_set_user(uint8_t usb_led) {
-    // Caps Lock Indicator
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        writePinLow(B2);
-        rgblight_setrgb(100, 255, 100);
-    }
-    // Layer Indicator
-    else {          
-        switch (get_highest_layer(layer_state)) {
-            // Fn Layer 1 Indicator
-            case _FN:
-                rgblight_setrgb(100, 255, 100);
-                break;
-            // Fn Layer 2 Indicator
-            case _SETTINGS:
-                rgblight_setrgb(100, 255, 100);
-                break;
-            // Default Layer Indicator
-            case _BASE:
-                rgblight_setrgb(0, 0, 0);
-                break;
-        }
-        update_led();
-    }
-}
-
-layer_state_t layer_state_set_user(layer_state_t state) {
-    update_led();
-    return state;
-}
--- a/keyboards/dz60/keymaps/mrsendyyk/readme.md
+++ b/keyboards/dz60/keymaps/mrsendyyk/readme.md
@@ -1,85 +0,0 @@
-# Sendy YK's 60% ANSI Arrow Layout and Keymap
-
-[https://mr.sendyyk.com](https://mr.sendyyk.com)
-
-## 60% ANSI Arrow Layout
-
-![LAYOUT_60_ansi_arrow](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow.png)
-
-## Keymap
-
-### Default Layer
-
-![_BASE](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-0.png)
-
-### Fn Layer 1
-
-Press and hold *right* **Ctrl** key.
-
-![_FN](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-1.png)
-
-### Fn Layer 2
-
-Press and hold *right* **Alt** key.
-
-![_SETTINGS](https://raw.githubusercontent.com/mrsendyyk/my_qmk/master/dz60/assets/layout-60-ansi-arrow-keymap---layer-2.png)
-
-### RGB Lighting/LED/Underglow as Caps Lock, Num Lock, Scroll Lock, and Layer Indicator
-
-#### Caps Lock Indicator
-
-```c
-    // Caps Lock Indicator
-    if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-        writePinLow(B2);
-        rgblight_setrgb(100, 255, 100);
-    }
-```
-
-#### Num Lock Indicator
-
-```c
-    // Num Lock Indicator
-    if (host_keyboard_led_state().num_lock) {
-        rgblight_setrgb(225, 8, 0);
-    }
-```
-
-#### Scroll Lock Indicator
-```c
-    // Scroll Lock Indicator
-    if (host_keyboard_led_state().scroll_lock) {
-        rgblight_setrgb(255, 110, 0);
-    }
-```
-
-#### Layer Indicator
-
-```c
-    // Layer Indicator
-    else {          
-        switch (get_highest_layer(layer_state)) {
-            // Fn Layer 1 Indicator
-            case _FN:
-                rgblight_setrgb(100, 255, 100);
-                break;
-            // Fn Layer 2 Indicator
-            case _SETTINGS:
-                rgblight_setrgb(100, 255, 100);
-                break;
-            // Default Layer Indicator
-            case _BASE:
-                rgblight_setrgb(0, 0, 0);
-                break;
-        }
-        update_led();
-    }
-```
-
-## Build The Firmware
-
-You will need to build the firmware. To do so go to your terminal window and run the compile command:
-
-    qmk compile -kb dz60 -km mrsendyyk
-
-See [The Complete Newbs Guide To QMK](https://docs.qmk.fm/#/newbs).
--- a/keyboards/dz60/keymaps/pevecyan/keymap.c
+++ b/keyboards/dz60/keymaps/pevecyan/keymap.c
@@ -8,11 +8,11 @@
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

  [0] = LAYOUT( \
-    KC_GESC,SI_1,   SI_2,   SI_3,   SI_4,   SI_5,   SI_6,   SI_7,   SI_8,   SI_9,   SI_0,   SI_QOT, SI_PLUS,XXXXXXX,KC_BSPC, \
-    KC_TAB,         SI_Q,   SI_W,   SI_E,   SI_R,   SI_T,   SI_Z,   SI_U,   SI_I,   SI_O,   SI_P,   SI_GRV, SI_TILD,CARON,   \
-    MO(2),          SI_A,   SI_S,   SI_D,   SI_F,   SI_G,   SI_H,   SI_J,   SI_K,   SI_L,   KC_SCLN,KC_QUOT,KC_ENT,          \
+    KC_GESC,SI_1,   SI_2,   SI_3,   SI_4,   SI_5,   SI_6,   SI_7,   SI_8,   SI_9,   SI_0,   SI_QUOT, SI_PLUS,XXXXXXX,KC_BSPC, \
+    KC_TAB,         SI_Q,   SI_W,   SI_E,   SI_R,   SI_T,   SI_Z,   SI_U,   SI_I,   SI_O,   SI_P,    SI_GRV, SI_TILD,CARON,   \
+    MO(2),          SI_A,   SI_S,   SI_D,   SI_F,   SI_G,   SI_H,   SI_J,   SI_K,   SI_L,   KC_SCLN, KC_QUOT,KC_ENT,          \
    KC_LSFT,XXXXXXX,SI_Y,   SI_X,   SI_C,   SI_V,   SI_B,   SI_N,   SI_M,   SI_COMM,SI_DOT, SI_MINS,        KC_RSFT,XXXXXXX, \
-    KC_LCTL,KC_LGUI,        KC_LALT,KC_SPC,         KC_SPC,         KC_SPC,         KC_RALT,MO(3),  XXXXXXX,MO(1),  KC_F5    \
+    KC_LCTL,KC_LGUI,        KC_LALT,KC_SPC,         KC_SPC,         KC_SPC,         KC_RALT,MO(3),   XXXXXXX,MO(1),  KC_F5    \
  ),

  [1] = LAYOUT( \
@@ -33,9 +33,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

  [3] = LAYOUT( \
    _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
-    _______,        _______,_______,_______,_______,_______,SI_ZV,  _______,_______,_______,_______,_______,_______,_______, \
-    _______,        _______,SI_SV,  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,         \
-    _______,_______,_______,_______,SI_CV,  _______,_______,_______,_______,_______,_______,_______,        _______,_______, \
+    _______,        _______,_______,_______,_______,_______,SI_ZCAR,_______,_______,_______,_______,_______,_______,_______, \
+    _______,        _______,SI_SCAR,  _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,         \
+    _______,_______,_______,_______,SI_CCAR,  _______,_______,_______,_______,_______,_______,_______,        _______,_______, \
    _______,_______,        _______,_______,        _______,        _______,        _______,_______,_______,_______,_______  \
  ),
 };
--- a/keyboards/emajesty/eiri/config.h
+++ b/keyboards/emajesty/eiri/config.h
@@ -0,0 +1,96 @@
+/*
+Copyright 2020 EMajesty
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0xFEED
+#define PRODUCT_ID   0x9372
+#define DEVICE_VER   0x0001
+#define MANUFACTURER EMajesty
+#define PRODUCT      eiri
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B4, B5, B2, B6 }
+#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6, B3, B1, F7, F6, F5, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0
--- a/keyboards/emajesty/eiri/eiri.c
+++ b/keyboards/emajesty/eiri/eiri.c
@@ -0,0 +1,17 @@
+/* Copyright 2020 EMajesty
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "eiri.h"
--- a/keyboards/emajesty/eiri/eiri.h
+++ b/keyboards/emajesty/eiri/eiri.h
@@ -0,0 +1,40 @@
+/* Copyright 2020 EMajesty
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    K00, K01, K02, K03, K04, K05,               K06, K07, K08, K09, K10, K11, \
+    K12, K13, K14, K15, K16, K17,               K18, K19, K20, K21, K22, K23, \
+    K24, K25, K26, K27, K28, K29,               K30, K31, K32, K33, K34, K35, \
+              K36, K37, K38, K39, K40,     K41, K42, K43, K44, K45 \
+) { \
+    { K00,   K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11   }, \
+    { K12,   K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23   }, \
+    { K24,   K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35   }, \
+    { KC_NO, K36, K37, K38, K39, K40, K41, K42, K43, K44, K45, KC_NO } \
+}
+
--- a/keyboards/emajesty/eiri/info.json
+++ b/keyboards/emajesty/eiri/info.json
@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "eiri",
+    "url": "https://github.com/EMajesty/eiri",
+    "maintainer": "EMajesty",
+    "width": 15,
+    "height": 4.5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [{"x":3, "y":0}, {"x":11, "y":0}, {"x":2, "y":0.25}, {"x":4, "y":0.25}, {"x":10, "y":0.25}, {"x":12, "y":0.25}, {"x":1, "y":0.5}, {"x":5, "y":0.5}, {"x":9, "y":0.5}, {"x":13, "y":0.5}, {"x":0, "y":0.75}, {"x":14, "y":0.75}, {"x":3, "y":1}, {"x":11, "y":1}, {"x":2, "y":1.25}, {"x":4, "y":1.25}, {"x":10, "y":1.25}, {"x":12, "y":1.25}, {"x":1, "y":1.5}, {"x":5, "y":1.5}, {"x":9, "y":1.5}, {"x":13, "y":1.5}, {"x":0, "y":1.75}, {"x":14, "y":1.75}, {"x":3, "y":2}, {"x":11, "y":2}, {"x":2, "y":2.25}, {"x":4, "y":2.25}, {"x":10, "y":2.25}, {"x":12, "y":2.25}, {"x":1, "y":2.5}, {"x":5, "y":2.5}, {"x":9, "y":2.5}, {"x":13, "y":2.5}, {"x":0, "y":2.75}, {"x":14, "y":2.75}, {"x":3, "y":3}, {"x":11, "y":3}, {"x":2, "y":3.25}, {"x":4, "y":3.25}, {"x":10, "y":3.25}, {"x":12, "y":3.25}, {"x":5, "y":3.5}, {"x":6, "y":3.5}, {"x":8, "y":3.5}, {"x":9, "y":3.5}]
+        }
+    }
+}
--- a/keyboards/emajesty/eiri/keymaps/default/keymap.c
+++ b/keyboards/emajesty/eiri/keymaps/default/keymap.c
@@ -0,0 +1,34 @@
+/* Copyright 2020 EMajesty
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,                           KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSLS,
+        KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,                           KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,
+        KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,                           KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,
+                          KC_LGUI, KC_LALT, KC_SPC,  KC_DEL,  MO(1),        MO(2),   KC_ENT, KC_BSPC, KC_RALT, KC_RGUI),
+    [1] = LAYOUT(
+        KC_ESC,  _______, KC_UP,   _______, KC_HOME, KC_PGUP,                        _______, _______, _______, KC_LPRN, KC_RPRN, KC_GRV,
+        _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_END,  KC_PGDN,                        _______, KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, _______,
+        _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______,                        _______, _______, _______, KC_LCBR, KC_RCBR, _______,
+                          _______, _______, _______, _______, _______,      _______, _______, _______, _______, _______),
+    [2] = LAYOUT(
+        RESET,   KC_1,    KC_2,    KC_3,    KC_4,    KC_5,                           KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
+        _______, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC,                        KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
+        KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                          KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,
+                          _______, _______, _______, _______, _______,      _______, _______, _______, _______, _______)
+};
--- a/keyboards/emajesty/eiri/keymaps/default/readme.md
+++ b/keyboards/emajesty/eiri/keymaps/default/readme.md
@@ -0,0 +1,3 @@
+![default keymap](https://imgur.com/F3L3z8w.png)
+
+# The default keymap for eiri
--- a/keyboards/emajesty/eiri/readme.md
+++ b/keyboards/emajesty/eiri/readme.md
@@ -0,0 +1,19 @@
+# eiri
+
+![eiri](https://imgur.com/ZiLTj3Pl.png)
+
+An Atreus-inspired 40% keyboard with 6 columns
+
+* Keyboard Maintainer: [EMajesty](https://github.com/EMajesty)
+* Hardware Supported: eiri pcb
+* Hardware Availability: [Project is open source](https://github.com/EMajesty/eiri)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make emajesty/eiri:default
+
+Flashing example for this keyboard:
+
+    make emajesty/eiri:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- a/keyboards/emajesty/eiri/rules.mk
+++ b/keyboards/emajesty/eiri/rules.mk
@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
--- a/keyboards/ergodash/rev1/keymaps/333fred/config.h
+++ b/keyboards/ergodash/rev1/keymaps/333fred/config.h
@@ -1,3 +1,25 @@
+/*
+  Copyright (c) 2020 Fred Silberberg
+
+  Permission is hereby granted, free of charge, to any person obtaining a copy
+  of this software and associated documentation files (the "Software"), to deal
+  in the Software without restriction, including without limitation the rights
+  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+  copies of the Software, and to permit persons to whom the Software is
+  furnished to do so, subject to the following conditions:
+
+  The above copyright notice and this permission notice shall be included in all
+  copies or substantial portions of the Software.
+
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+  THE SOFTWARE.
+*/
+
 #pragma once

 #include QMK_KEYBOARD_CONFIG_H
--- a/keyboards/ergodash/rev1/keymaps/333fred/keymap.c
+++ b/keyboards/ergodash/rev1/keymaps/333fred/keymap.c
@@ -1,3 +1,25 @@
+/*
+  Copyright (c) 2020 Fred Silberberg
+
+  Permission is hereby granted, free of charge, to any person obtaining a copy
+  of this software and associated documentation files (the "Software"), to deal
+  in the Software without restriction, including without limitation the rights
+  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+  copies of the Software, and to permit persons to whom the Software is
+  furnished to do so, subject to the following conditions:
+
+  The above copyright notice and this permission notice shall be included in all
+  copies or substantial portions of the Software.
+
+  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+  THE SOFTWARE.
+*/
+
 #include QMK_KEYBOARD_H
 #include "333fred.h"

--- a/keyboards/ergodox_ez/config.h
+++ b/keyboards/ergodox_ez/config.h
@@ -32,6 +32,16 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2)
 #define MATRIX_COLS 6

+#define COL_EXPANDED { true, true, true, true, true, true, true, false, false, false, false, false, false, false }
+#define MATRIX_ONBOARD_ROW_PINS { 0, 0, 0, 0, 0, 0, 0, B0,  B1,  B2,  B3,  D2,  D3,  C6 }
+#define MATRIX_ONBOARD_COL_PINS { F0,  F1,  F4,  F5,  F6,  F7 }
+#define DIODE_DIRECTION COL2ROW
+#define EXPANDER_COL_REGISTER GPIOB
+#define EXPANDER_ROW_REGISTER GPIOA
+#define MATRIX_EXPANDER_COL_PINS { 5, 4, 3, 2, 1, 0 }
+#define MATRIX_EXPANDER_ROW_PINS { 0, 1, 2, 3, 4, 5, 6 }
+
+
 #define MOUSEKEY_INTERVAL       20
 #define MOUSEKEY_DELAY          0
 #define MOUSEKEY_TIME_TO_MAX    60
--- a/keyboards/ergodox_ez/ergodox_ez.c
+++ b/keyboards/ergodox_ez/ergodox_ez.c
@@ -1,4 +1,4 @@
-#include QMK_KEYBOARD_H
+#include "ergodox_ez.h"

 extern inline void ergodox_board_led_on(void);
 extern inline void ergodox_right_led_1_on(void);
--- a/keyboards/ergodox_ez/ergodox_ez.h
+++ b/keyboards/ergodox_ez/ergodox_ez.h
@@ -4,10 +4,6 @@
 #include <stdint.h>
 #include <stdbool.h>
 #include "i2c_master.h"
-#include <util/delay.h>
-
-#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
-#define CPU_16MHz       0x00

 // I2C aliases and register addresses (see "mcp23018.md")
 #define I2C_ADDR        0b0100000
--- a/Show More
+++ b/Show More